You are not logged in.
Pages: 1
Hi !
I am desperatly trying to use my laptop Acer Aspire 5315 s-video TV-Out, but I can't make it work.
Here's lspci output :
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
06:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
My xorg.conf is here http://pastebin.com/pTjgmGTQ and here is Xorg log : http://pastebin.com/dU1Qj5AA
I have tried the following commands, but none worked :
xrandr -display :0 --output TV1 --set TV_FORMAT PAL; xrandr --output TV1 --mode 1024x768
xrandr -display :0 --output TV1 --set TV_FORMAT PAL; xrandr --output TV1 --mode 640x480
xrandr -display :0 --output LVDS1 --auto --output TV1 --auto --same-as LVDS1
TV screen blinks during one half second, but doesn't display anything. VGA output works fine.
Does anybody get this working ?
Thanks in advance, and forgive my poor english.
Offline
Last time I did this on my TM 5320 it worked fine (a year ago maybe?), and that was after xf86-vide-intel 2.3.2 was released (previous versions had this broken):
xrandr --output TV --set TV_FORMAT PAL
xrandr --output TV --mode 1024x768 --right-of LVDS
You can see my article for more information, and an xorg.conf with some settings that could help you further:
http://sysphere.org/~anrxc/local/Travel … -5320.html
Edit:
I remembered another detail. I think the tv-out had a weird number of pins (6 maybe?) and all the cables I could find were different... finally when I found the right cable it didn't work, TV just blinked. I tried the usual cable with 4 and that worked.
Last edited by anrxc (2011-03-08 23:57:22)
You need to install an RTFM interface.
Offline
Thanks for your answer.
I try your command, but I get me the following error :
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 31
Current serial number in output stream: 31
I also tried with disabling KMS (i915.modeset=0) on kernel command line, but X didn't start so I put it back on
I checked my cable, and it has 4 pin. I will try to find a 6 pin cable to test if it works, but I doubt.
Offline
try lts kernel, that work for me
Offline
Thanks a lot !
It works very well with lts kernel. No xconf.org needed.
There's just a little problem, one I'm logged in with kdm I have an empty desktop. I will play with xrandr to see if I can fix it.
Offline
Last time TV out worked, i had the same problem with the empty desktop.
xrandr --output LVDS1 --primary
fixed it for me.
Offline
I tried this command, but it doesn't help. I finally solve the problem by launching kde in failsafe mode, and by disabling desktop effects. Now KDE displays fine, but xbmc gives me a blank screen. Any idea ?
Edit : It was not an XBMC problem : I can't have OpenGL on TV-Out for unknown reason. All OpenGL accelerated apps only shows a black window.
Last edited by yodaz (2011-04-07 17:33:27)
Offline
Is there any way to have TV out using the newest kernel? I checked that the LTS kernel sends video to the TV output fine, but I would hope not to miss the features of the newer kernels.
Offline
If I succeed, I'll let you know, but at the moment, tv-out is only functionnal with the kernel-lts
Offline
Pages: 1