You are not logged in.
When i use the make command as user or root on a wireless driver I'm try to install i get an error/warning:
[unilx@online 2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2]$ make
make -C tools
make[1]: Entering directory `/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/tools'
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/tools/bin2h
cp -f os/linux/Makefile.6 /home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/Makefile
make -C /lib/modules/2.6.38-ARCH/build SUBDIRS=/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux modules
make[1]: Entering directory `/usr/src/linux-2.6.38-ARCH'
CC [M] /home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.o
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c: In function ‘RtmpAsicEraseFirmware’:
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:128:3: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c: In function ‘RtmpAsicLoadFirmware’:
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:363:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c: In function ‘RtmpAsicSendCommandToMcu’:
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:541:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
/home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/../../common/rtmp_mcu.c:545:2: warning: variable ‘Val’ set but not used [-Wunused-but-set-variable]
LD [M] /home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/rt3562sta.o
Building modules, stage 2.
MODPOST 1 modules
LD [M] /home/unilx/2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2/os/linux/rt3562sta.ko
make[1]: Leaving directory `/usr/src/linux-2.6.38-ARCH'
[unilx@online 2010_01_28_RT2860_Linux_STA_v2.3.0.0_Alpha_v2]$
After running make,make install and blacklisting my other network modules my wireless card turns on, but when i try and connect manually or with wicd
my computer freezes or it times out.Any help with this would be appreciated.Thx
Offline
You didn't get "an error/warning" - you got warnings, which is not unusual. Your module compiled successfully, so no need to worry about the warnings.
Have a look at dmesg immediately after loading the driver, and again after attempting to connect.
Offline
When i enter my wireless info manually with: (iwconfig ra0 essid "my essid" key "my-key")
it doesn't register properly.See below
iwconfig
ra0 Ralink STA ESSID:"" Nickname:"RT3562STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:0 dBm Noise level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ifconfig
ra0 Link encap:Ethernet HWaddr 34:08:04:01:39:D7
inet6 addr: fe80::3608:4ff:fe01:39d7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2576 errors:0 dropped:0 overruns:0 frame:0
TX packets:7221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:229956 (224.5 Kb) TX bytes:0 (0.0 b)
Interrupt:17
When i try wicd i lose control of my keyboard/mouse and have to do a hard shutdown.
[zzuty@myhost ~]$ dmesg | grep -i rt2860sta
[ 1674.330752] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[zzuty@myhost ~]$ dmesg | grep -i ra0
[ 44.950009] ra0: no IPv6 routers present
[zzuty@myhost ~]$ lsmod
Module Size Used by
nls_cp437 5913 0
vfat 10143 0
fat 47937 1 vfat
usb_storage 42951 0
uas 7824 0
rt2860sta 518361 0
crc_ccitt 1355 1 rt2860sta
ipv6 277189 14
ext2 62258 1
usbhid 33814 0
hid 76802 1 usbhid
snd_hda_codec_realtek 294149 1
ohci_hcd 21864 0
nvidia 10488718 40
snd_seq_dummy 1455 0
snd_seq_oss 28052 0
snd_seq_midi_event 5332 1 snd_seq_oss
snd_seq 48705 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5100 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 37890 0
snd_mixer_oss 14851 1 snd_pcm_oss
rt3562sta 894828 1
floppy 57071 0
snd_hda_intel 21738 2
firewire_ohci 28105 0
snd_hda_codec 73739 2 snd_hda_codec_realtek,snd_hda_intel
firewire_core 47790 1 firewire_ohci
snd_hwdep 6134 1 snd_hda_codec
crc_itu_t 1321 1 firewire_core
snd_pcm 71032 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 18992 2 snd_seq,snd_pcm
snd 55132 15 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5986 1 snd
snd_page_alloc 7017 2 snd_hda_intel,snd_pcm
button 4794 0
processor 23608 0
sg 24917 0
ehci_hcd 39177 0
usbcore 134859 6 usb_storage,uas,usbhid,ohci_hcd,ehci_hcd
evdev 9178 5
nv_tco 4640 0
forcedeth 51901 0
i2c_nforce2 5056 0
i2c_core 18740 2 nvidia,i2c_nforce2
psmouse 52944 0
serio_raw 4222 0
pcspkr 1843 0
ext4 332976 2
mbcache 5649 2 ext2,ext4
jbd2 69632 1 ext4
crc16 1321 1 ext4
sr_mod 14247 0
sd_mod 26276 5
cdrom 35689 1 sr_mod
pata_amd 11003 0
sata_nv 21260 4
pata_acpi 3240 0
libata 167694 3 pata_amd,sata_nv,pata_acpi
scsi_mod 123282 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
Offline
Did you actually load the module once you finished compiling it?
EDIT: Never mind, I see it in your lsmod.
Last edited by cesura (2011-04-28 01:23:01)
Offline
Sidenote: 2860 is supported in the kernel. Also, the drive you tried to build is in aur.
Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest
Offline
From what i can tell my driver is working properly, my wireless card turns on.I can see it with ifconfig and iwconfig.
When i run iwconfig my essid doesn't set properly and my access point is not-associated because of it.The first line of iwconfig when i run it should be
something like IEEE 802.11bg ESSID:"myessid" or Ralink STA ESSID:"myessid" instead of Ralink STA ESSID:"" Nickname:"RT3562STA".
Is there any other way to input my essid other then iwconfig ra0 essid "myessid" key "mykey" .That method doesn't seem to work on this wireless card
Card Name: DWA-525
iwconfig
ra0 Ralink STA ESSID:"" Nickname:"RT3562STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:0 dBm Noise level:-115 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Last edited by unilx (2011-04-29 02:56:00)
Offline