You are not logged in.
I have a cheap lpr print server from ebay. It is very similar to this device (even the looks of the packaging) http://www.win-star.com/eshop/goods.php?id=58. The printer I'd like to set up is Canon PIXMA MP180, that I have working over standard usb connection on arch. I am unable to set it to a usable configuration in CUPS over the network. As expected, there is no mention of linux in the printer server manual.
The procedure in windows (tested-works absolutely fine...) is to install some sort of network printer discovery tool (called networking printer wizzard). This utility then lists the located network printer and asks you to provide the inf driver. I have successfully printed a test page from windows (with no slowdown whatsoever). The manual lists also the procedure for mac: no special tool off the install cd needed, just use the built-in tool to discover the printer over bonjour. I have no mac and can't test this...
Now to arch: the print server has an ip and is pingable and has a very rudimentary web interface (as oposed to the device linked above no telnet thought). I have set CUPS to device uri lpd://ip/PASSTHROUGH (I have also tested other queue names, and no name at all as well-all of the combinations provided same results). If I try to print a test page, the printer starts printing, but it would take ages to print even the first few characters of the page. The CUPS web interface says spooling LPR job, and it takes about 15 minutes to go to 6% for the test page.
I wonder how to set it up. Obviously, the print server/printer combo works from windows, so there is no reason why it shouldn't from arch. I have no experience with avahi (to folow the bonjour discovery hint in the print server manual), but avahi-discover doesn't help me much further. I even tried booting ubuntu 11.04 and setting it up from there. It took ages to discover the printer and the slow spooler behavior was exactly the same as in arch.
After some long googling, now answer came up. Is there someone who has such a device working correctly?
Offline
Take a look at avahi
Edit : sorry I olny skimmed the second half of your post. You have seen Avahi ![]()
It probably is your answer though
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
maybe try printing over ipp instead of lpr, this has always worked for me for printing to my print server from linux.
e.g. viewing printers in cups web interface then choosing the printer in question takes me to a URL like http://cups-server-ip:631/printers/HP_DeskJet
so when i'm adding the printer i just point it to ipp://cups-server-ip:631/printers/HP_DeskJet
hope that helps.
Perfect is the enemy of good.
Offline
I have the same usb-2-ip printer server as yours. Not able to set it up in CUPS. have you figure this out? From its webpage, it says LPR printer server so guess have to use lpd protocol.
Offline