You are not logged in.
- Topics: Active | Unanswered
#1 2011-05-12 23:16:30
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
[SOLVED]Nouveau Screen Extends Past Display Edge
A recent X server update ruined my Nvidia driver setup so I reinstalled and tried to stick with Nouveau. I installed X, Nouvea, and KDE as the wiki suggested. I boot into a terminal and I can see the whole screen. After I start X I cannot see the bottom of my screen. The edge of my screen goes past my display's edge. My mouse can go down too and click around. I navigate around and run stuff through Alt+F2. Alt+F1 allows me to see the tip top of the KDE Launch Menu.
I suppose the ideal solution would to be getting Nouveau working, I can get vesa to work but I max out at a resolution of 800x600 on a display capable of 1920x1200.
xorg.conf.d/20-nouveau.conf:
Section "Device"
Identifier "n"
Driver "nouveau"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "n"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600_60.00"
EndSubSection
EndSectionIn the above, my screen is not coming in at 800x600, that resolution is just a test.
xrandr output:
Screen 0: minimum 320 x 200, current 2048 x 1536, maximum 8192 x 8192
LVDS-1 connected 2048x1536+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
2048x1536 60.0*+
1920x1200 59.9
1920x1080 60.0
1600x1200 59.9
1680x1050 60.0
1400x1050 60.0
1280x1024 59.9
1280x960 59.9
1152x864 60.0
1024x768 59.9
800x600 59.9
640x480 59.4
720x400 59.6
640x400 60.0
640x350 59.8
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)/var/log/Xorg.0.log"
[ 547.560]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
[ 547.560]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 547.560] X Protocol Version 11, Revision 0
[ 547.560] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 547.560] Current Operating System: Linux vaio 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 547.560] Kernel command line: root=/dev/sda7 ro
[ 547.561] Build Date: 21 June 2010 12:01:49PM
[ 547.561]
[ 547.561] Current version of pixman: 0.18.2
[ 547.561] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 547.561] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 547.561] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 12 19:05:11 2011
[ 547.561] (==) Using config file: "/etc/X11/xorg.conf"
[ 547.561] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 547.562] (==) ServerLayout "Layout0"
[ 547.562] (**) |-->Screen "Screen0" (0)
[ 547.562] (**) | |-->Monitor "Monitor0"
[ 547.562] (**) | |-->Device "n"
[ 547.562] (**) |-->Input Device "Keyboard0"
[ 547.562] (**) |-->Input Device "Mouse0"
[ 547.562] (==) Automatically adding devices
[ 547.562] (==) Automatically enabling devices
[ 547.562] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 547.562] Entry deleted from font path.
[ 547.562] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 547.562] Entry deleted from font path.
[ 547.562] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 547.562] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 547.562] Entry deleted from font path.
[ 547.562] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 547.562] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 547.562] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 547.562] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 547.562] (WW) Disabling Keyboard0
[ 547.562] (WW) Disabling Mouse0
[ 547.562] (II) Loader magic: 0x7ce880
[ 547.562] (II) Module ABI versions:
[ 547.563] X.Org ANSI C Emulation: 0.4
[ 547.563] X.Org Video Driver: 7.0
[ 547.563] X.Org XInput driver : 9.0
[ 547.563] X.Org Server Extension : 3.0
[ 547.575] (--) PCI:*(0:1:0:0) 10de:0a29:104d:9067 nVidia Corporation rev 162, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 547.575] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 547.575] (II) LoadModule: "extmod"
[ 547.576] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 547.576] (II) Module extmod: vendor="X.Org Foundation"
[ 547.576] compiled for 1.8.1.902, module version = 1.0.0
[ 547.576] Module class: X.Org Server Extension
[ 547.576] ABI class: X.Org Server Extension, version 3.0
[ 547.576] (II) Loading extension MIT-SCREEN-SAVER
[ 547.576] (II) Loading extension XFree86-VidModeExtension
[ 547.576] (II) Loading extension XFree86-DGA
[ 547.576] (II) Loading extension DPMS
[ 547.576] (II) Loading extension XVideo
[ 547.576] (II) Loading extension XVideo-MotionCompensation
[ 547.576] (II) Loading extension X-Resource
[ 547.576] (II) LoadModule: "dbe"
[ 547.576] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 547.576] (II) Module dbe: vendor="X.Org Foundation"
[ 547.576] compiled for 1.8.1.902, module version = 1.0.0
[ 547.576] Module class: X.Org Server Extension
[ 547.576] ABI class: X.Org Server Extension, version 3.0
[ 547.576] (II) Loading extension DOUBLE-BUFFER
[ 547.577] (II) LoadModule: "glx"
[ 547.577] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 547.577] (II) Module glx: vendor="X.Org Foundation"
[ 547.577] compiled for 1.8.1.902, module version = 1.0.0
[ 547.577] ABI class: X.Org Server Extension, version 3.0
[ 547.577] (==) AIGLX enabled
[ 547.577] (II) Loading extension GLX
[ 547.577] (II) LoadModule: "record"
[ 547.578] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 547.578] (II) Module record: vendor="X.Org Foundation"
[ 547.578] compiled for 1.8.1.902, module version = 1.13.0
[ 547.578] Module class: X.Org Server Extension
[ 547.578] ABI class: X.Org Server Extension, version 3.0
[ 547.578] (II) Loading extension RECORD
[ 547.578] (II) LoadModule: "dri"
[ 547.578] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 547.578] (II) Module dri: vendor="X.Org Foundation"
[ 547.578] compiled for 1.8.1.902, module version = 1.0.0
[ 547.578] ABI class: X.Org Server Extension, version 3.0
[ 547.578] (II) Loading extension XFree86-DRI
[ 547.578] (II) LoadModule: "dri2"
[ 547.579] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 547.579] (II) Module dri2: vendor="X.Org Foundation"
[ 547.579] compiled for 1.8.1.902, module version = 1.2.0
[ 547.579] ABI class: X.Org Server Extension, version 3.0
[ 547.579] (II) Loading extension DRI2
[ 547.579] (II) LoadModule: "nouveau"
[ 547.579] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 547.580] (II) Module nouveau: vendor="X.Org Foundation"
[ 547.580] compiled for 1.8.0.902, module version = 0.0.16
[ 547.580] Module class: X.Org Video Driver
[ 547.580] ABI class: X.Org Video Driver, version 7.0
[ 547.580] (II) NOUVEAU driver
[ 547.580] (II) NOUVEAU driver for NVIDIA chipset families :
[ 547.580] RIVA TNT (NV04)
[ 547.580] RIVA TNT2 (NV05)
[ 547.580] GeForce 256 (NV10)
[ 547.580] GeForce 2 (NV11, NV15)
[ 547.580] GeForce 4MX (NV17, NV18)
[ 547.580] GeForce 3 (NV20)
[ 547.580] GeForce 4Ti (NV25, NV28)
[ 547.580] GeForce FX (NV3x)
[ 547.580] GeForce 6 (NV4x)
[ 547.580] GeForce 7 (G7x)
[ 547.580] GeForce 8 (G8x)
[ 547.580] (--) using VT number 8
[ 547.584] (II) Primary Device is: PCI 01@00:00:0
[ 547.584] drmOpenDevice: node name is /dev/dri/card0
[ 547.584] drmOpenDevice: open result is 7, (OK)
[ 547.584] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 547.584] drmOpenDevice: node name is /dev/dri/card0
[ 547.584] drmOpenDevice: open result is 7, (OK)
[ 547.584] drmOpenByBusid: drmOpenMinor returns 7
[ 547.584] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 547.584] (II) [drm] nouveau interface version: 0.0.16
[ 547.584] (II) Loading sub module "dri"
[ 547.585] (II) LoadModule: "dri"
[ 547.585] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 547.585] (II) NOUVEAU(0): Loaded DRI module
[ 547.585] drmOpenDevice: node name is /dev/dri/card0
[ 547.585] drmOpenDevice: open result is 8, (OK)
[ 547.585] drmOpenDevice: node name is /dev/dri/card0
[ 547.585] drmOpenDevice: open result is 8, (OK)
[ 547.585] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 547.585] drmOpenDevice: node name is /dev/dri/card0
[ 547.585] drmOpenDevice: open result is 8, (OK)
[ 547.585] drmOpenByBusid: drmOpenMinor returns 8
[ 547.585] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 547.585] (II) [drm] DRM interface version 1.3
[ 547.585] (II) [drm] DRM open master succeeded.
[ 547.585] (--) NOUVEAU(0): Chipset: "NVIDIA NVa5"
[ 547.585] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 547.585] (==) NOUVEAU(0): RGB weight 888
[ 547.585] (==) NOUVEAU(0): Default visual is TrueColor
[ 547.585] (==) NOUVEAU(0): Using HW cursor
[ 547.588] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0
[ 547.686] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 547.843] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 547.845] (II) NOUVEAU(0): EDID for output LVDS-1
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x350" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x175" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x400" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x200" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "720x400" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "360x200" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x240" (unknown reason)
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x240" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x240" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
[ 547.845] (II) NOUVEAU(0): Not using default mode "320x240" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "400x300" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "400x300" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "400x300" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "400x300" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "400x300" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "512x384i" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "512x384" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "512x384" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "512x384" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "512x384" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "576x432" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1280x960" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "640x480" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1280x960" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1280x1024" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "640x512" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1280x1024" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "640x512" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1280x1024" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "640x512" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1600x1200" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1792x1344" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "896x672" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1792x1344" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "896x672" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1856x1392" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "928x696" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1856x1392" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "928x696" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1920x1440" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "960x720" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1920x1440" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "960x720" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "832x624" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "416x312" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1400x1050" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "700x525" (unknown reason)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1400x1050" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "700x525" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1920x1440" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "960x720" (vrefresh out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "2048x1536" (hsync out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "1024x768" (hsync out of range)
[ 547.846] (II) NOUVEAU(0): Not using default mode "2048x1536" (vrefresh out of range)
[ 547.847] (II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
[ 547.847] (II) NOUVEAU(0): Not using default mode "2048x1536" (vrefresh out of range)
[ 547.847] (II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
[ 547.847] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 547.847] (II) NOUVEAU(0): Modeline "2048x1536"x60.0 200.00 2048 2096 2112 2144 1536 1553 1554 1555 +hsync +vsync (93.3 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 547.847] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 547.945] (II) NOUVEAU(0): EDID for output VGA-1
[ 548.103] (II) NOUVEAU(0): EDID for output HDMI-1
[ 548.103] (II) NOUVEAU(0): Output LVDS-1 connected
[ 548.103] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 548.103] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 548.103] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 548.103] (II) NOUVEAU(0): Output LVDS-1 using initial mode 2048x1536
[ 548.103] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 548.103] (--) NOUVEAU(0): Virtual size is 2048x1536 (pitch 2048)
[ 548.103] (**) NOUVEAU(0): Driver mode "2048x1536": 200.0 MHz (scaled from 0.0 MHz), 93.3 kHz, 60.0 Hz
[ 548.103] (II) NOUVEAU(0): Modeline "2048x1536"x60.0 200.00 2048 2096 2112 2144 1536 1553 1554 1555 +hsync +vsync (93.3 kHz)
[ 548.103] (**) NOUVEAU(0): Driver mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz (scaled from 0.0 MHz), 74.5 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 548.104] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 548.104] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 548.104] (==) NOUVEAU(0): DPI set to (96, 96)
[ 548.104] (II) Loading sub module "wfb"
[ 548.104] (II) LoadModule: "wfb"
[ 548.104] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 548.105] (II) Module wfb: vendor="X.Org Foundation"
[ 548.105] compiled for 1.8.1.902, module version = 1.0.0
[ 548.105] ABI class: X.Org ANSI C Emulation, version 0.4
[ 548.105] (II) Loading sub module "fb"
[ 548.105] (II) LoadModule: "fb"
[ 548.105] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 548.105] (II) Module fb: vendor="X.Org Foundation"
[ 548.105] compiled for 1.8.1.902, module version = 1.0.0
[ 548.105] ABI class: X.Org ANSI C Emulation, version 0.4
[ 548.105] (II) Loading sub module "exa"
[ 548.105] (II) LoadModule: "exa"
[ 548.106] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 548.106] (II) Module exa: vendor="X.Org Foundation"
[ 548.106] compiled for 1.8.1.902, module version = 2.5.0
[ 548.106] ABI class: X.Org Video Driver, version 7.0
[ 548.106] (II) Loading sub module "shadowfb"
[ 548.106] (II) LoadModule: "shadowfb"
[ 548.106] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 548.106] (II) Module shadowfb: vendor="X.Org Foundation"
[ 548.106] compiled for 1.8.1.902, module version = 1.0.0
[ 548.106] ABI class: X.Org ANSI C Emulation, version 0.4
[ 548.106] (--) Depth 24 pixmap format is 32 bpp
[ 548.125] (II) NOUVEAU(0): Opened GPU channel 2
[ 548.125] (II) NOUVEAU(0): [DRI2] Setup complete
[ 548.125] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 548.125] (II) NOUVEAU(0): GART: 512MiB available
[ 548.129] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 548.129] (II) EXA(0): Driver allocated offscreen pixmaps
[ 548.129] (II) EXA(0): Driver registered support for the following operations:
[ 548.129] (II) Solid
[ 548.129] (II) Copy
[ 548.129] (II) Composite (RENDER acceleration)
[ 548.129] (II) UploadToScreen
[ 548.129] (II) DownloadFromScreen
[ 548.129] (==) NOUVEAU(0): Backing store disabled
[ 548.129] (==) NOUVEAU(0): Silken mouse enabled
[ 548.129] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 548.129] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 548.145] (II) NOUVEAU(0): NVEnterVT is called.
[ 548.145] (==) NOUVEAU(0): DPMS enabled
[ 548.145] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 548.146] (--) RandR disabled
[ 548.146] (II) Initializing built-in extension Generic Event Extension
[ 548.146] (II) Initializing built-in extension SHAPE
[ 548.146] (II) Initializing built-in extension MIT-SHM
[ 548.146] (II) Initializing built-in extension XInputExtension
[ 548.146] (II) Initializing built-in extension XTEST
[ 548.146] (II) Initializing built-in extension BIG-REQUESTS
[ 548.146] (II) Initializing built-in extension SYNC
[ 548.146] (II) Initializing built-in extension XKEYBOARD
[ 548.146] (II) Initializing built-in extension XC-MISC
[ 548.146] (II) Initializing built-in extension SECURITY
[ 548.146] (II) Initializing built-in extension XINERAMA
[ 548.146] (II) Initializing built-in extension XFIXES
[ 548.146] (II) Initializing built-in extension RENDER
[ 548.146] (II) Initializing built-in extension RANDR
[ 548.146] (II) Initializing built-in extension COMPOSITE
[ 548.146] (II) Initializing built-in extension DAMAGE
[ 548.178] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 548.178] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 548.178] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 548.178] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 548.179] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[ 548.179] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 548.180] (II) NOUVEAU(0): Setting screen physical size to 541 x 406
[ 548.180] resize called 2048 1536
[ 548.283] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event1)
[ 548.283] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 548.283] (II) LoadModule: "evdev"
[ 548.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 548.284] (II) Module evdev: vendor="X.Org Foundation"
[ 548.284] compiled for 1.8.0, module version = 2.4.0
[ 548.284] Module class: X.Org XInput Driver
[ 548.284] ABI class: X.Org XInput driver, version 9.0
[ 548.284] (**) Sony Vaio Keys: always reports core events
[ 548.284] (**) Sony Vaio Keys: Device: "/dev/input/event1"
[ 548.307] (II) Sony Vaio Keys: Found keys
[ 548.307] (II) Sony Vaio Keys: Configuring as keyboard
[ 548.307] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 548.307] (**) Option "xkb_rules" "evdev"
[ 548.307] (**) Option "xkb_model" "evdev"
[ 548.307] (**) Option "xkb_layout" "us"
[ 548.365] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 548.365] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 548.366] (**) Video Bus: always reports core events
[ 548.366] (**) Video Bus: Device: "/dev/input/event3"
[ 548.387] (II) Video Bus: Found keys
[ 548.389] (II) Video Bus: Configuring as keyboard
[ 548.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 548.389] (**) Option "xkb_rules" "evdev"
[ 548.389] (**) Option "xkb_model" "evdev"
[ 548.389] (**) Option "xkb_layout" "us"
[ 548.390] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 548.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 548.390] (**) Power Button: always reports core events
[ 548.390] (**) Power Button: Device: "/dev/input/event5"
[ 548.427] (II) Power Button: Found keys
[ 548.427] (II) Power Button: Configuring as keyboard
[ 548.427] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 548.427] (**) Option "xkb_rules" "evdev"
[ 548.427] (**) Option "xkb_model" "evdev"
[ 548.427] (**) Option "xkb_layout" "us"
[ 548.427] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 548.427] (II) No input driver/identifier specified (ignoring)
[ 548.431] (II) config/udev: Adding input device UVC Camera (064e:2100) (/dev/input/event9)
[ 548.431] (**) UVC Camera (064e:2100): Applying InputClass "evdev keyboard catchall"
[ 548.431] (**) UVC Camera (064e:2100): always reports core events
[ 548.431] (**) UVC Camera (064e:2100): Device: "/dev/input/event9"
[ 548.463] (II) UVC Camera (064e:2100): Found keys
[ 548.463] (II) UVC Camera (064e:2100): Configuring as keyboard
[ 548.463] (II) XINPUT: Adding extended input device "UVC Camera (064e:2100)" (type: KEYBOARD)
[ 548.463] (**) Option "xkb_rules" "evdev"
[ 548.463] (**) Option "xkb_model" "evdev"
[ 548.463] (**) Option "xkb_layout" "us"
[ 548.465] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 548.465] (II) No input driver/identifier specified (ignoring)
[ 548.469] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event10)
[ 548.469] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 548.469] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 548.469] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event10"
[ 548.490] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 548.490] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 548.490] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 548.490] (**) Option "xkb_rules" "evdev"
[ 548.490] (**) Option "xkb_model" "evdev"
[ 548.490] (**) Option "xkb_layout" "us"
[ 548.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event11)
[ 548.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev pointer catchall"
[ 548.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 548.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 548.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event11"
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 9 mouse buttons
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y relative axes
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 548.517] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 548.517] (**) Option "xkb_rules" "evdev"
[ 548.517] (**) Option "xkb_model" "evdev"
[ 548.517] (**) Option "xkb_layout" "us"
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 548.517] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 548.517] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 548.517] (WW) Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 548.518] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/mouse2)
[ 548.518] (II) No input driver/identifier specified (ignoring)
[ 548.519] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event12)
[ 548.519] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 548.519] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 548.519] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event12"
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 1 mouse buttons
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y absolute axes
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 548.543] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 548.544] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 548.544] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 548.544] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD)
[ 548.544] (**) Option "xkb_rules" "evdev"
[ 548.544] (**) Option "xkb_model" "evdev"
[ 548.544] (**) Option "xkb_layout" "us"
[ 548.544] (EE) Microsoft Microsoft® 2.4GHz Transceiver v6.0: failed to initialize for relative axes.
[ 548.544] (WW) Device 'Microsoft Microsoft® 2.4GHz Transceiver v6.0' has 37 axes, only using first 36.
[ 548.544] (II) Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for absolute axes.
[ 548.544] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/js0)
[ 548.545] (II) No input driver/identifier specified (ignoring)
[ 548.549] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 548.549] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 548.549] (**) AT Translated Set 2 keyboard: always reports core events
[ 548.549] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 548.570] (II) AT Translated Set 2 keyboard: Found keys
[ 548.570] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 548.570] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 548.570] (**) Option "xkb_rules" "evdev"
[ 548.570] (**) Option "xkb_model" "evdev"
[ 548.570] (**) Option "xkb_layout" "us"
[ 548.571] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event7)
[ 548.571] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 548.571] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 548.571] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event7"
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 548.597] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 548.597] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 548.597] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 548.597] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 548.597] (II) No input driver/identifier specified (ignoring)
[ 548.598] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 548.598] (II) No input driver/identifier specified (ignoring)
[ 548.599] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event2)
[ 548.599] (II) No input driver/identifier specified (ignoring)
[ 548.599] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 548.599] (II) No input driver/identifier specified (ignoring)Last edited by bsilvereagle (2011-05-13 13:40:09)
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#2 2011-05-12 23:53:40
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
xrandr says you're using 2048x1536 - have you tried to change it to your desired resolution .e.g 'xrandr --fb 1920x1200'?
Last edited by karol (2011-05-12 23:55:07)
Offline
#3 2011-05-13 00:34:20
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
Yes, the 1920x1200 stretches out to match the display X thinks I have, 20" is what I'm thinking, and the problem persists. My monitor is 16.4".
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#4 2011-05-13 00:42:45
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
bsilvereagle wrote:
Yes, the 1920x1200 stretches out to match the display X thinks I have, 20" is what I'm thinking, and the problem persists. My monitor is 16.4".
Actually, xrandr reports '0mm x 0mm'.
Try
--fbmm widthxheight
Sets the reported values for the physical size of the screen. Normally, xrandr resets the
reported physical size values to keep the DPI constant. This overrides that computation.Offline
#5 2011-05-13 00:54:20
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
xrandr -s 0 --fbmm 1920x1080didn't do anything for the screen as a whole, but the titles of my chrome tabs shrank to what looks like a size 4 text.
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#6 2011-05-13 00:58:26
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
bsilvereagle wrote:
xrandr -s 0 --fbmm 1920x1080didn't do anything for the screen as a whole, but the titles of my chrome tabs shrank to what looks like a size 4 text.
Ummm, 1920x1200 are dimensions in pixels, you use it with the '--fb' switch. The '--fbmm' one needs millimeters. My 19" is 410mm x 256mm.
Offline
#7 2011-05-13 01:10:38
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
Let me bust out my scale.....145x95 still did nothing. No change in the screen dimensions.
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#8 2011-05-13 01:20:38
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
I've just noticed you're using an oooold X server:
X.Org X Server 1.8.1.902 (1.8.2 RC 2)and an ooold kernel
[ 547.560] Build Operating System: Linux 2.6.34-ARCH x86_64 Why?
Which nvidia driver have you been using? nvidia, nvidia-173xx or nvidia-96xx?
bsilvereagle wrote:
Let me bust out my scale.....145x95 still did nothing. No change in the screen dimensions.
No offense, but it looks more like a 7" screen ;P If you measured 14.5""x9.5" you need to multiply it times 25,4: 368x241 seems about right.
Does 'xrandr -q' still report 0 x 0 mm size?
You can try setting the dpi instead
--dpi dpi
This also sets the reported physical size values of the screen, it uses the specified DPI
value to compute an appropriate physical size using whatever pixel size will be set.Last edited by karol (2011-05-13 01:30:48)
Offline
#9 2011-05-13 01:29:39
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
The "old" X server and Kernel are supposedly "pacman -Syu" fresh.....
Nvidia 260.19.44 but that isn't quite what you're asking.
No offense taken, I used the wrong side of the scale. Even with the right size nothing happens.
Querying xrandr still shows 0mm x 0mm.
I needed a program in Win7, I'll try the dpi soon.
Thanks for your help so far.
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#10 2011-05-13 01:34:29
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
OK, so let's start by getting you a fresh mirrorlist: http://www.archlinux.org/mirrorlist/
Pick some servers, save the list to your drive, run 'pacman -Syy' and use this mirrrolist to get a lot of new packages. Be sure to read all the post install notes.
What's the output of 'pacman -Q pacman'?
Offline
#11 2011-05-13 01:49:40
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
None of my mirrors changed from the ones I had, however, rankmirrors moved them around - and I have a boatload of stuff to redownload. But I know I downloaded several (old) versions of these packages earlier today. I even had an old pacman database version! Do some mirrors not update in a timely manner? And my current version of strigi is newer than the one in the extra repo on the server I'm using. Lovely.
I'm going to have to do this on a hi-speed connection tomorrow, 1006 MB is a little much. Thanks for catching that.
Last edited by bsilvereagle (2011-05-13 01:51:52)
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline
#12 2011-05-13 01:54:22
- karol
- Archivist
- Registered: 2009-05-06
- Posts: 25,440
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
I think pacman uses the first server from the list, so if it's age-old but still working, you get no updates.
bsilvereagle wrote:
I even had an old pacman database version!
You need to update pacman and run pacman-db-upgrade script. It was a painless transition for me so I don't think you need to worry.
bsilvereagle wrote:
Thanks for catching that.
Oh yeah, in a record-breaking 2hrs time!
Sorry, I should have read the logs you posted carefully, not just glance over looking for obvious errors.
Last edited by karol (2011-05-13 01:56:24)
Offline
#13 2011-05-13 13:42:10
- bsilvereagle
- Member
- Registered: 2011-03-29
- Posts: 42
Re: [SOLVED]Nouveau Screen Extends Past Display Edge
Hey, 2 hours is a lot better than a reinstall with the same problem 
With the new mirror, it boots fine and KDE launches inside of my screen, thanks for catching that again.
Pacman does use the first server from the list, but I kind of figured all of the servers were pretty up to date.
Vaio F11: i7-720 QM | 8 GB RAM | Nvidia GT330m
Windows 7 | openSuse 11.4 KDE | Arch Linux e17/KDE
Offline