You are not logged in.
Pages: 1
Every single thing worked just great, then I burned a CD with Brasero (which I've done before), and right when the CD got ejected everything froze. My music froze, and so did the mouse and my computer didn't listen to any key strokes. Then I noticed that my CAPSLOCK and NUMLOCK leds on my keyboard were blinking. Was it a kernel panic? I don't know.
The only option I had left was to hit the big red reset button.
At boot, GRUB worked just fine, and then a lot of text as usual when Linux checks stuff and such, and after that a black screen with a non blinking cursor up in the left corner of the screen. Instead of that non blinking cursor, I've set gnome to autoload, which it wasn't. So I removed the autoload of gnome so that the usual prompt should appear, but it does not! So right now, I have no idea what to do!
I have checked my partitions with gparted on a live CD and they all seem to be intact.
/Znax
Last edited by ZnaxQue (2011-06-05 13:42:03)
Offline
Every single thing worked just great, then I burned a CD with Brasero (which I've done before), and right when the CD got ejected everything froze. My music froze, and so did the mouse and my computer didn't listen to any key strokes. Then I noticed that my CAPSLOCK and NUMLOCK leds on my keyboard were blinking. Was it a kernel panic? I don't know.
yes it was
The only option I had left was to hit the big red reset button.
At boot, GRUB worked just fine, and then a lot of text as usual when Linux checks stuff and such, and after that a black screen with a non blinking cursor up in the left corner of the screen. Instead of that non blinking cursor, I've set gnome to autoload, which it wasn't. So I removed the autoload of gnome so that the usual prompt should appear, but it does not! So right now, I have no idea what to do!
I have checked my partitions with gparted on a live CD and they all seem to be intact./Znax
you should boot from a livecd and do fsck on the / and /home partitions
Offline
I used a Ubuntu 10.04 live CD to run e2fsck on both my "/", "/boot" and "/home" partitions, neither of them had any errors. Checking the partitions with Gparted doesn't give me any errors either.
Offline
Perhaps the kernel panic wiki will give you some clues.
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
Perhaps the kernel panic wiki will give you some clues.
I have now checked the kernel panic wiki which told me to re-install my kernel, which I did. But the problem is still there. I have no idea what to do!
Last edited by ZnaxQue (2011-05-29 17:25:36)
Offline
Comeon, I really need help with this! :C I've installed so much stuff and configured alot, I don't want to do all that again.
Offline
I assume you are using gdm or, at the least, another login manager.
You state the problem is occurring during boot. Do the diagnostics to which you referred show that services were starting (little PASS / FAIL messages off to the right)? If so, you are at least out of the initrd stage and are running init
How are you starting the window manager? Dis you change /etc/innittab, or did you put gdm (or whatever) into the daemons array in /etc/rc.conf ?
If you used the inittab method, what happens if you bring the system up in run level 3.
If you used the rc.conf method, boot using this advice from fphillips
Anyway - at the grub menu, hit e, then highlight the kernel line, hit e again, edit it so that init=/bin/sh, then escape, and b to boot.
The former should bring you up to a console login, the latter will dump you into an interactive bash shell. From there, lets go look at dmesg and the logs.
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
You state the problem is occurring during boot. Do the diagnostics to which you referred show that services were starting (little PASS / FAIL messages off to the right)? If so, you are at least out of the initrd stage and are running init.
All of the services gives me a PASS, except one. The "Checking Filesystems" gives me a BUSY, but I think it has done that before everything crashed, though I'm not completely sure.
How are you starting the window manager? Did you change /etc/innittab, or did you put gdm (or whatever) into the daemons array in /etc/rc.conf?
About that, I'm using the gdm.
To get the gdm working, I added this to the rc.conf:
gnome_enable="yes"
dbus_enable="yes"
hald_enable="yes"
And uncommented this in the inittab:
x:5:respawn:/usr/sbin/gdm -nodaemon
And added this to the xinitrc:
exec ck-launch-session gnome-session
Offline
@Znax remove those three lines from /etc/rc.conf, edit /etc/inittab comment "id:3:initdefault:" and uncomment "id:5:initdefault:"
...
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
...
And try to boot!
Greetings
P.S. Uncomment id:5 line if you want boot to gdm or id:3 line to boot to tty1
Last edited by AurosGamma (2011-06-06 02:37:14)
Offline
Ok, now I can at least get to the prompt and be able to login by doing this:
I did this (just to test what was going to happen):
/etc/rc.conf
...
#gnome_enable="yes"
#dbus_enable="yes"
#hald_enable="yes"
...
/etc/inittb
...
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
...
#x:5:respawn:/usr/sbin/gdm -nodaemon
...
/etc/X11/xinit/xinitrc
...
#exec ck-launch-session gnome-session
...
:EDIT:
I commented these lines in the rc.conf again:
...
gnome_enable="yes"
dbus_enable="yes"
hald_enable="yes"
...
So I am able to start gdm with the command "gdm", but the computer freezes just like before (with the non-blinking cursor).
Last edited by ZnaxQue (2011-06-06 14:55:44)
Offline
...
From there, lets go look at dmesg and the logs.
So, I should do something like this?:
dmesg > dmesg.log
Offline
Hi ZnaxQue,
What would probably be more helpful would be the contents of /var/log/Xorg.0.log. That will probably tell us why Xorg is failing to start.
Offline
My Xorg.0.log is empty, so are Xorg.0.log.
But, the other files (Xorg.1.log.old to Xorg.5.log.old), do hold some information, though the info is the same in all of them (except that the numbers to the left differs some):
[ 24.954]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 24.954] X Protocol Version 11, Revision 0
[ 24.954] Build Operating System: Linux 2.6.38-ARCH i686
[ 24.954] Current Operating System: Linux AngelEagle 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 07:54:18 UTC 2011 i686
[ 24.954] Kernel command line: root=/dev/disk/by-uuid/5d563464-0bdd-4a93-978f-883d4f5b5dbd ro vga=775
[ 24.954] Build Date: 16 April 2011 12:05:35PM
[ 24.954]
[ 24.954] Current version of pixman: 0.20.2
[ 24.954] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.954] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.955] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Jun 5 11:00:29 2011
[ 24.955] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.955] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.955] (==) ServerLayout "aticonfig Layout"
[ 24.955] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.955] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.955] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.955] (==) Automatically adding devices
[ 24.955] (==) Automatically enabling devices
[ 24.955] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.955] Entry deleted from font path.
[ 24.955] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.955] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.955] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.955] (II) Loader magic: 0x81f4ee0
[ 24.955] (II) Module ABI versions:
[ 24.955] X.Org ANSI C Emulation: 0.4
[ 24.955] X.Org Video Driver: 10.0
[ 24.955] X.Org XInput driver : 12.2
[ 24.955] X.Org Server Extension : 5.0
[ 24.956] (--) PCI:*(0:1:0:0) 1002:9440:1787:2267 rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[ 24.956] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.956] (II) "extmod" will be loaded by default.
[ 24.956] (II) "dbe" will be loaded by default.
[ 24.956] (II) "glx" will be loaded by default.
[ 24.956] (II) "record" will be loaded by default.
[ 24.956] (II) "dri" will be loaded by default.
[ 24.956] (II) "dri2" will be loaded by default.
[ 24.956] (II) LoadModule: "extmod"
[ 24.956] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.956] (II) Module extmod: vendor="X.Org Foundation"
[ 24.956] compiled for 1.10.1, module version = 1.0.0
[ 24.956] Module class: X.Org Server Extension
[ 24.956] ABI class: X.Org Server Extension, version 5.0
[ 24.956] (II) Loading extension MIT-SCREEN-SAVER
[ 24.956] (II) Loading extension XFree86-VidModeExtension
[ 24.956] (II) Loading extension XFree86-DGA
[ 24.956] (II) Loading extension DPMS
[ 24.956] (II) Loading extension XVideo
[ 24.956] (II) Loading extension XVideo-MotionCompensation
[ 24.956] (II) Loading extension X-Resource
[ 24.956] (II) LoadModule: "dbe"
[ 24.956] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.956] (II) Module dbe: vendor="X.Org Foundation"
[ 24.956] compiled for 1.10.1, module version = 1.0.0
[ 24.957] Module class: X.Org Server Extension
[ 24.957] ABI class: X.Org Server Extension, version 5.0
[ 24.957] (II) Loading extension DOUBLE-BUFFER
[ 24.957] (II) LoadModule: "glx"
[ 24.957] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.957] (II) Module glx: vendor="X.Org Foundation"
[ 24.957] compiled for 1.10.1, module version = 1.0.0
[ 24.957] ABI class: X.Org Server Extension, version 5.0
[ 24.957] (==) AIGLX enabled
[ 24.957] (II) Loading extension GLX
[ 24.957] (II) LoadModule: "record"
[ 24.957] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.957] (II) Module record: vendor="X.Org Foundation"
[ 24.957] compiled for 1.10.1, module version = 1.13.0
[ 24.957] Module class: X.Org Server Extension
[ 24.957] ABI class: X.Org Server Extension, version 5.0
[ 24.957] (II) Loading extension RECORD
[ 24.957] (II) LoadModule: "dri"
[ 24.957] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.957] (II) Module dri: vendor="X.Org Foundation"
[ 24.957] compiled for 1.10.1, module version = 1.0.0
[ 24.957] ABI class: X.Org Server Extension, version 5.0
[ 24.957] (II) Loading extension XFree86-DRI
[ 24.957] (II) LoadModule: "dri2"
[ 24.957] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.957] (II) Module dri2: vendor="X.Org Foundation"
[ 24.957] compiled for 1.10.1, module version = 1.2.0
[ 24.957] ABI class: X.Org Server Extension, version 5.0
[ 24.957] (II) Loading extension DRI2
[ 24.957] (II) LoadModule: "fglrx"
[ 24.957] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.969] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.969] compiled for 1.4.99.906, module version = 8.85.6
[ 24.969] Module class: X.Org Video Driver
[ 24.969] (II) Loading sub module "fglrxdrm"
[ 24.969] (II) LoadModule: "fglrxdrm"
[ 24.969] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.969] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.969] compiled for 1.4.99.906, module version = 8.85.6
[ 24.969] (II) ATI Proprietary Linux Driver Version Identifier:8.85.6
[ 24.969] (II) ATI Proprietary Linux Driver Release Identifier: 8.85
[ 24.969] (II) ATI Proprietary Linux Driver Build Date: Apr 19 2011 21:29:55
[ 24.969] (++) using VT number 8
[ 24.970] (WW) Falling back to old probe method for fglrx
[ 24.980] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 24.981] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[ 24.981] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.981] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 24.981] (II) AMD Video driver is signed
[ 24.981] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.981] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.981] (II) fglrx(0): pEnt->device->identifier=0x8f395c0
[ 24.981] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 24.981] (II) Loading sub module "vgahw"
[ 24.981] (II) LoadModule: "vgahw"
[ 24.982] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 24.982] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.982] compiled for 1.10.1, module version = 0.1.0
[ 24.982] ABI class: X.Org Video Driver, version 10.0
[ 24.982] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.982] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.982] (==) fglrx(0): Default visual is TrueColor
[ 24.982] (**) fglrx(0): Option "DPMS" "true"
[ 24.982] (==) fglrx(0): RGB weight 888
[ 24.982] (II) fglrx(0): Using 8 bits per RGB
[ 24.982] (==) fglrx(0): Buffer Tiling is ON
[ 24.982] (II) Loading sub module "fglrxdrm"
[ 24.982] (II) LoadModule: "fglrxdrm"
[ 24.982] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.982] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.982] compiled for 1.4.99.906, module version = 8.85.6
[ 24.983] ukiDynamicMajor: failed to open /proc/ati/major
[ 24.983] ukiDynamicMajor: failed to open /proc/ati/major
[ 24.983] (==) fglrx(0): NoAccel = NO
[ 24.983] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.983] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
[ 24.983] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2267)
[ 24.983] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.983] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 24.983] (--) fglrx(0): MMIO registers at 0xfe8e0000
[ 24.983] (--) fglrx(0): I/O port at 0x0000b000
[ 24.983] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.986] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 24.986] (EE) fglrx(0): ACPI: DRM connection failed
[ 24.986] (II) Loading sub module "vbe"
[ 24.986] (II) LoadModule: "vbe"
[ 24.986] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 24.986] (II) Module vbe: vendor="X.Org Foundation"
[ 24.986] compiled for 1.10.1, module version = 1.1.0
[ 24.986] ABI class: X.Org Video Driver, version 10.0
[ 24.987] (II) fglrx(0): VESA BIOS detected
[ 24.987] (II) fglrx(0): VESA VBE Version 3.0
[ 24.987] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 24.987] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 24.987] (II) fglrx(0): VESA VBE OEM Software Rev: 11.10
[ 24.987] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 24.987] (II) fglrx(0): VESA VBE OEM Product: RV770
[ 24.987] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.017] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.017] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 25.017] (II) fglrx(0): PCIE card detected
[ 25.017] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.017] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.017] (WW) fglrx(0): Hasn't establisted DRM connection
[ 25.017] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 25.017] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 25.018] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.018] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.018] (==) fglrx(0): Center Mode is disabled
[ 25.018] (II) Loading sub module "fb"
[ 25.018] (II) LoadModule: "fb"
[ 25.018] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.018] (II) Module fb: vendor="X.Org Foundation"
[ 25.018] compiled for 1.10.1, module version = 1.0.0
[ 25.018] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.018] (II) Loading sub module "ddc"
[ 25.018] (II) LoadModule: "ddc"
[ 25.018] (II) Module "ddc" already built-in
[ 25.958] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 25.958] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.958] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.958] (II) fglrx(0): Output CRT2 has no monitor section
[ 25.958] (II) fglrx(0): Output TV has no monitor section
[ 25.959] (II) fglrx(0): Output CV has no monitor section
[ 25.959] (II) Loading sub module "ddc"
[ 25.959] (II) LoadModule: "ddc"
[ 25.959] (II) Module "ddc" already built-in
[ 25.959] (II) fglrx(0): Connected Display0: CRT1
[ 25.959] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.959] (II) fglrx(0): Manufacturer: VSC Model: f518 Serial#: 16843009
[ 25.959] (II) fglrx(0): Year: 2004 Week: 44
[ 25.959] (II) fglrx(0): EDID Version: 1.3
[ 25.959] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 25.959] (II) fglrx(0): Sync: Separate
[ 25.959] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 25.959] (II) fglrx(0): Gamma: 2.20
[ 25.959] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 25.959] (II) fglrx(0): Default color space is primary color space
[ 25.959] (II) fglrx(0): First detailed timing is preferred mode
[ 25.959] (II) fglrx(0): redX: 0.651 redY: 0.320 greenX: 0.300 greenY: 0.600
[ 25.959] (II) fglrx(0): blueX: 0.153 blueY: 0.109 whiteX: 0.313 whiteY: 0.329
[ 25.959] (II) fglrx(0): Supported established timings:
[ 25.959] (II) fglrx(0): 720x400@70Hz
[ 25.959] (II) fglrx(0): 640x480@60Hz
[ 25.959] (II) fglrx(0): 640x480@67Hz
[ 25.959] (II) fglrx(0): 640x480@72Hz
[ 25.959] (II) fglrx(0): 640x480@75Hz
[ 25.959] (II) fglrx(0): 800x600@56Hz
[ 25.959] (II) fglrx(0): 800x600@60Hz
[ 25.959] (II) fglrx(0): 800x600@72Hz
[ 25.959] (II) fglrx(0): 800x600@75Hz
[ 25.959] (II) fglrx(0): 832x624@75Hz
[ 25.959] (II) fglrx(0): 1024x768@60Hz
[ 25.959] (II) fglrx(0): 1024x768@70Hz
[ 25.959] (II) fglrx(0): 1024x768@75Hz
[ 25.959] (II) fglrx(0): 1280x1024@75Hz
[ 25.959] (II) fglrx(0): 1152x864@75Hz
[ 25.959] (II) fglrx(0): Manufacturer's mask: 0
[ 25.959] (II) fglrx(0): Supported standard timings:
[ 25.959] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.959] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 25.959] (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 25.959] (II) fglrx(0): Supported detailed timing:
[ 25.959] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 25.959] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 25.959] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 25.959] (II) fglrx(0): Serial No: A33044452574
[ 25.959] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 25.959] (II) fglrx(0): Monitor name: VE710s
[ 25.959] (II) fglrx(0): EDID (in hex):
[ 25.959] (II) fglrx(0): 00ffffffffffff005a6318f501010101
[ 25.959] (II) fglrx(0): 2c0e010308221b782ece45a6524c9927
[ 25.959] (II) fglrx(0): 1c5054bfef8081808140714f01010101
[ 25.959] (II) fglrx(0): 010101010101302a009851002a403070
[ 25.959] (II) fglrx(0): 1300520e1100001e000000ff00413333
[ 25.959] (II) fglrx(0): 3034343435323537340a000000fd0032
[ 25.959] (II) fglrx(0): 4b1e500e000a202020202020000000fc
[ 25.959] (II) fglrx(0): 005645373130730a20202020202000e0
[ 25.959] (II) fglrx(0): End of Display0 EDID data --------------------
[ 26.164] (II) fglrx(0): EDID for output DFP1
[ 26.164] (II) fglrx(0): EDID for output DFP2
[ 26.164] (II) fglrx(0): EDID for output CRT1
[ 26.164] (II) fglrx(0): Manufacturer: VSC Model: f518 Serial#: 16843009
[ 26.164] (II) fglrx(0): Year: 2004 Week: 44
[ 26.164] (II) fglrx(0): EDID Version: 1.3
[ 26.164] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 26.164] (II) fglrx(0): Sync: Separate
[ 26.164] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 26.165] (II) fglrx(0): Gamma: 2.20
[ 26.165] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 26.165] (II) fglrx(0): Default color space is primary color space
[ 26.165] (II) fglrx(0): First detailed timing is preferred mode
[ 26.165] (II) fglrx(0): redX: 0.651 redY: 0.320 greenX: 0.300 greenY: 0.600
[ 26.165] (II) fglrx(0): blueX: 0.153 blueY: 0.109 whiteX: 0.313 whiteY: 0.329
[ 26.165] (II) fglrx(0): Supported established timings:
[ 26.165] (II) fglrx(0): 720x400@70Hz
[ 26.165] (II) fglrx(0): 640x480@60Hz
[ 26.165] (II) fglrx(0): 640x480@67Hz
[ 26.165] (II) fglrx(0): 640x480@72Hz
[ 26.165] (II) fglrx(0): 640x480@75Hz
[ 26.165] (II) fglrx(0): 800x600@56Hz
[ 26.165] (II) fglrx(0): 800x600@60Hz
[ 26.165] (II) fglrx(0): 800x600@72Hz
[ 26.165] (II) fglrx(0): 800x600@75Hz
[ 26.165] (II) fglrx(0): 832x624@75Hz
[ 26.165] (II) fglrx(0): 1024x768@60Hz
[ 26.165] (II) fglrx(0): 1024x768@70Hz
[ 26.165] (II) fglrx(0): 1024x768@75Hz
[ 26.165] (II) fglrx(0): 1280x1024@75Hz
[ 26.165] (II) fglrx(0): 1152x864@75Hz
[ 26.165] (II) fglrx(0): Manufacturer's mask: 0
[ 26.165] (II) fglrx(0): Supported standard timings:
[ 26.165] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 26.165] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 26.165] (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 26.165] (II) fglrx(0): Supported detailed timing:
[ 26.165] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 26.165] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 26.165] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 26.165] (II) fglrx(0): Serial No: A33044452574
[ 26.165] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 26.165] (II) fglrx(0): Monitor name: VE710s
[ 26.165] (II) fglrx(0): EDID (in hex):
[ 26.165] (II) fglrx(0): 00000000782830293a2053796e633a00
[ 26.165] (II) fglrx(0): 6374757265723a202573202029000000
[ 26.165] (II) fglrx(0): 00000000782830293a20454449442028
[ 26.165] (II) fglrx(0): 696e20686578293a0a0051002a403070
[ 26.165] (II) fglrx(0): 1300520e410000000000000078283029
[ 26.165] (II) fglrx(0): 3a2046697273742064657461696c6564
[ 26.165] (II) fglrx(0): 2074696d696e67206973207072656665
[ 26.165] (II) fglrx(0): 72726564206d6f64650a00650a0000e0
[ 26.165] (II) fglrx(0): Printing probed modes for output CRT1
[ 26.165] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 26.165] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 26.165] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 26.165] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 26.165] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 26.165] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 26.165] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 26.165] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 26.165] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 26.165] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 26.165] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 26.165] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 26.165] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 26.165] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 26.165] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 26.165] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 26.165] (II) fglrx(0): EDID for output CRT2
[ 26.165] (II) fglrx(0): EDID for output TV
[ 26.165] (II) fglrx(0): EDID for output CV
[ 26.165] (II) fglrx(0): Output DFP1 disconnected
[ 26.165] (II) fglrx(0): Output DFP2 disconnected
[ 26.165] (II) fglrx(0): Output CRT1 connected
[ 26.165] (II) fglrx(0): Output CRT2 disconnected
[ 26.165] (II) fglrx(0): Output TV disconnected
[ 26.165] (II) fglrx(0): Output CV disconnected
[ 26.165] (II) fglrx(0): Using exact sizes for initial modes
[ 26.165] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 26.166] (II) fglrx(0): DPI set to (96, 96)
[ 26.166] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected.
[ 26.166] (==) fglrx(0): PseudoColor visuals disabled
[ 26.166] (II) Loading sub module "ramdac"
[ 26.166] (II) LoadModule: "ramdac"
[ 26.166] (II) Module "ramdac" already built-in
[ 26.166] (==) fglrx(0): NoDRI = NO
[ 26.166] (==) fglrx(0): Capabilities: 0x00000000
[ 26.166] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 26.166] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 26.166] (==) fglrx(0): UseFastTLS=0
[ 26.166] (==) fglrx(0): BlockSignalsOnLock=1
[ 26.166] (--) Depth 24 pixmap format is 32 bpp
[ 26.166] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[ 26.166] (WW) fglrx(0): ***********************************************************
[ 26.166] (WW) fglrx(0): * DRI initialization failed *
[ 26.166] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 26.166] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 26.166] (WW) fglrx(0): ***********************************************************
[ 26.166] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
Now, looking at the end of the file(s), there seem to be a problem with fglrx? And I think it may be my ATI drivers:
I used the "ATI Proprietary Drivers" for my HD4870 graphics card, but after I installed them, dragging windows around and scrolling inside them lagged a**, so I *removed* the driver in a nasty way, somehow... I maybe the problem lies there?
Offline
Hi ZnaxQue,
You're right, the improper uninstallation of the ATI Proprietary drivers is what is causing Xorg to fail to start. You should either reinstall the ATI Proprietary drivers and perhaps consult the catalyst wiki entry on how to troubleshoot the slow window dragging issue, or remove /etc/X11/xorg.conf and try using the open-source radeon xorg driver. You will probably also need to remove nomodeset from /boot/grub/menu.lst as that is required by the ATI Proprietary Catalyst drivers, but is incompatible with the open-source radeon driver.
Offline
Hi ZnaxQue,
You're right, the improper uninstallation of the ATI Proprietary drivers is what is causing Xorg to fail to start. You should either reinstall the ATI Proprietary drivers and perhaps consult the catalyst wiki entry on how to troubleshoot the slow window dragging issue, or remove /etc/X11/xorg.conf and try using the open-source radeon xorg driver. You will probably also need to remove nomodeset from /boot/grub/menu.lst as that is required by the ATI Proprietary Catalyst drivers, but is incompatible with the open-source radeon driver.
I reinstalled the ATI driver , and started gnome, a voila! It worked perfect (except that usual lag). But when I updated, I discovered a new version of Gnome, Gnome 3. And, I just hate it so much, looks terrible. I'm going to install fluxbox instead and give that a try. ;D
Thank you all!
/ZnaxQue
Offline
Pages: 1