You are not logged in.
I currently have a dual monitor setup using Xfce4. The resolutions and location of the screens is fine, but there's a slight problem: The left screen is 'shifted' down and right by a small margin. This means There are black bars along the top and left of the monitor, and the bottom / right of it is off screen.
Currently using an HD 4800 series card with the open source driver.
My .xinitrc file
#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
xrandr --newmode "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
#DVI-1 is on the left
#DVI-0 on the right
xrandr --addmode DVI-0 1280x1024
xrandr --addmode DVI-1 1280x1024
xrandr --output DVI-0 --mode 1280x1024
xrandr --output DVI-1 --mode 1280x1024
xrandr --output DVI-0 --right-of DVI-1
exec ck-launch-session dbus-launch --exit-with-session startxfce4
I've played around with both my monitor settings and xrandr commands, but I am unable to fix it. What am I missing?
Last edited by Hazzy (2011-05-29 23:29:13)
Offline
Switch to dvi if you can. If you can't check the org log for edid errors, and do a calibration of your screen.
Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest
Offline
I'm afraid I don't know what you mean.
Offline
What is the output of `xrandr`?
Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.
Tu ne cede malis sed contra audentior ito
Offline
What is the output of `xrandr`?
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
DVI-0 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DIN disconnected (normal left inverted right x axis y axis)
DVI-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
1280x1024 60.0*
Offline
Are you absolutely sure that DVI-1 supports a 1280x1024 mode? In your xinitrc, it looks like you're forcing the issue---but if it doesn't support that mode, then you're in trouble.
Can you get DVI-1 on 1280x1024 with another operating system/video driver?
Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.
Tu ne cede malis sed contra audentior ito
Offline
I have never had an issue running that resolution on Window 7, Vista, or Ubuntu (10 and 11). :s
I booted into Windows today and saw the monitor problem persist, which is a first. Toyed with the monitor settings and it seems to have resolved itself, booting into Arch now to see if it carries over.
Edit: It did carry over. That's so weird....
I assume Windows used the proprietary driver, and I remember setting the resolutions via Catalyst in Ubuntu. This is, as far as I know, the first time I've tried using the open source driver. Maybe that's it?
Nonetheless, the issue seems to have resolved itself... for now. Thanks.
Last edited by Hazzy (2011-05-29 23:28:55)
Offline
Next time you can start by pushing some buttons on the monitor itself - I have one labeled 'Auto' which nicely aligns the picture if it become shifted for some reason. If it doesn't work the first time, hit it again or go through the OSD menus and try to manually adjust horizontal and vertical position.
Offline