You are not logged in.
- Topics: Active | Unanswered
#1 2011-06-06 15:19:52
- shak
- Member
- Registered: 2009-03-16
- Posts: 405
Xorg warnings for fglrx and error for keyboard
HI everyone !
After a recent installation i'm getting some warnings about fglrx and error about keyboard . BUt everything works ok , i just need to disappear those warnings and errors
This is my whole Xorg0.log
[ 59.865]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 59.866] X Protocol Version 11, Revision 0
[ 59.866] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 59.866] Current Operating System: Linux arch 2.6.38-ARCH #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011 x86_64
[ 59.866] Kernel command line: root=/dev/sda3 ro
[ 59.866] Build Date: 30 May 2011 08:18:15AM
[ 59.866]
[ 59.866] Current version of pixman: 0.22.0
[ 59.866] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.867] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 6 18:01:38 2011
[ 59.868] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.868] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.868] (==) ServerLayout "aticonfig Layout"
[ 59.868] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 59.868] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 59.868] (**) | |-->Device "aticonfig-Device[0]-0"
[ 59.868] (==) Automatically adding devices
[ 59.868] (==) Automatically enabling devices
[ 59.868] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 59.868] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.868] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.868] (II) Loader magic: 0x7d3440
[ 59.868] (II) Module ABI versions:
[ 59.868] X.Org ANSI C Emulation: 0.4
[ 59.868] X.Org Video Driver: 10.0
[ 59.868] X.Org XInput driver : 12.2
[ 59.868] X.Org Server Extension : 5.0
[ 59.869] (--) PCI:*(0:1:0:0) 1002:68c1:1025:036e rev 0, Mem @ 0xe0000000/268435456, 0xf2100000/131072, I/O @ 0x00006000/256, BIOS @ 0x????????/131072
[ 59.869] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.869] (II) LoadModule: "extmod"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 59.870] (II) Module extmod: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension MIT-SCREEN-SAVER
[ 59.870] (II) Loading extension XFree86-VidModeExtension
[ 59.870] (II) Loading extension XFree86-DGA
[ 59.870] (II) Loading extension DPMS
[ 59.870] (II) Loading extension XVideo
[ 59.870] (II) Loading extension XVideo-MotionCompensation
[ 59.870] (II) Loading extension X-Resource
[ 59.870] (II) LoadModule: "dbe"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 59.870] (II) Module dbe: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension DOUBLE-BUFFER
[ 59.870] (II) LoadModule: "glx"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.871] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 59.871] compiled for 6.9.0, module version = 1.0.0
[ 59.871] (II) Loading extension GLX
[ 59.871] (II) LoadModule: "record"
[ 59.871] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 59.871] (II) Module record: vendor="X.Org Foundation"
[ 59.871] compiled for 1.10.2, module version = 1.13.0
[ 59.871] Module class: X.Org Server Extension
[ 59.871] ABI class: X.Org Server Extension, version 5.0
[ 59.871] (II) Loading extension RECORD
[ 59.871] (II) LoadModule: "dri"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 59.872] (II) Module dri: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.0.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension XFree86-DRI
[ 59.872] (II) LoadModule: "dri2"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 59.872] (II) Module dri2: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.2.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension DRI2
[ 59.872] (II) LoadModule: "fglrx"
[ 59.872] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.891] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 59.891] compiled for 1.4.99.906, module version = 8.85.6
[ 59.891] Module class: X.Org Video Driver
[ 59.892] (II) Loading sub module "fglrxdrm"
[ 59.892] (II) LoadModule: "fglrxdrm"
[ 59.892] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.892] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.892] compiled for 1.4.99.906, module version = 8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Version Identifier:8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Release Identifier: 8.85
[ 59.892] (II) ATI Proprietary Linux Driver Build Date: Apr 19 2011 21:30:04
[ 59.892] (--) using VT number 7
[ 59.894] (WW) Falling back to old probe method for fglrx
[ 59.901] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 59.902] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 59.903] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 59.903] (II) AMD Video driver is signed
[ 59.903] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.903] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.903] (II) fglrx(0): pEnt->device->identifier=0xe53db0
[ 59.903] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 59.903] (II) Loading sub module "vgahw"
[ 59.903] (II) LoadModule: "vgahw"
[ 59.903] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 59.904] (II) Module vgahw: vendor="X.Org Foundation"
[ 59.904] compiled for 1.10.2, module version = 0.1.0
[ 59.904] ABI class: X.Org Video Driver, version 10.0
[ 59.904] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 59.904] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 59.904] (==) fglrx(0): Default visual is TrueColor
[ 59.904] (**) fglrx(0): Option "DPMS" "true"
[ 59.904] (==) fglrx(0): RGB weight 888
[ 59.904] (II) fglrx(0): Using 8 bits per RGB
[ 59.904] (==) fglrx(0): Buffer Tiling is ON
[ 59.904] (II) Loading sub module "fglrxdrm"
[ 59.904] (II) LoadModule: "fglrxdrm"
[ 59.904] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.904] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.904] compiled for 1.4.99.906, module version = 8.85.6
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 59.906] ukiOpenDevice: node name is /dev/ati/card0
[ 59.906] ukiOpenDevice: open result is 10, (OK)
[ 59.906] ukiOpenByBusid: ukiOpenMinor returns 10
[ 59.906] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 59.906] (==) fglrx(0): NoAccel = NO
[ 59.906] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 59.906] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[ 59.906] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036e)
[ 59.906] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 59.906] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 59.906] (--) fglrx(0): MMIO registers at 0xf2100000
[ 59.906] (--) fglrx(0): I/O port at 0x00006000
[ 59.906] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 59.973] (II) fglrx(0): ATIF platform detected
[ 59.976] (II) fglrx(0): AC Adapter is used
[ 59.984] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 60.092] (II) Loading sub module "vbe"
[ 60.092] (II) LoadModule: "vbe"
[ 60.093] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 60.093] (II) Module vbe: vendor="X.Org Foundation"
[ 60.093] compiled for 1.10.2, module version = 1.1.0
[ 60.093] ABI class: X.Org Video Driver, version 10.0
[ 60.093] (II) fglrx(0): VESA BIOS detected
[ 60.093] (II) fglrx(0): VESA VBE Version 3.0
[ 60.093] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 60.093] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 60.093] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 60.093] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 60.093] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 60.093] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 60.136] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 60.136] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 60.136] (II) fglrx(0): PCIE card detected
[ 60.136] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 60.136] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 60.139] (II) fglrx(0): Using adapter: 1:0.0.
[ 60.269] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 60.278] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 60.278] (II) fglrx(0): RandR 1.2 support is enabled!
[ 60.278] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 60.278] (==) fglrx(0): Center Mode is disabled
[ 60.278] (II) Loading sub module "fb"
[ 60.278] (II) LoadModule: "fb"
[ 60.278] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 60.278] (II) Module fb: vendor="X.Org Foundation"
[ 60.278] compiled for 1.10.2, module version = 1.0.0
[ 60.278] ABI class: X.Org ANSI C Emulation, version 0.4
[ 60.278] (II) Loading sub module "ddc"
[ 60.278] (II) LoadModule: "ddc"
[ 60.278] (II) Module "ddc" already built-in
[ 60.344] (II) fglrx(0): Finished Initialize PPLIB!
[ 60.344] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 60.345] (II) fglrx(0): Output DFP1 has no monitor section
[ 60.345] (II) fglrx(0): Output CRT1 has no monitor section
[ 60.345] (II) Loading sub module "ddc"
[ 60.345] (II) LoadModule: "ddc"
[ 60.345] (II) Module "ddc" already built-in
[ 60.345] (II) fglrx(0): Connected Display0: LVDS
[ 60.345] (II) fglrx(0): Display0 EDID data ---------------------------
[ 60.345] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.345] (II) fglrx(0): Year: 2010 Week: 7
[ 60.345] (II) fglrx(0): EDID Version: 1.3
[ 60.345] (II) fglrx(0): Digital Display Input
[ 60.345] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.345] (II) fglrx(0): Gamma: 2.20
[ 60.345] (II) fglrx(0): No DPMS capabilities specified
[ 60.345] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.345] (II) fglrx(0): First detailed timing is preferred mode
[ 60.345] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.345] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.345] (II) fglrx(0): Manufacturer's mask: 0
[ 60.345] (II) fglrx(0): Supported detailed timing:
[ 60.345] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.345] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.345] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): CMO
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): EDID (in hex):
[ 60.345] (II) fglrx(0): 00ffffffffffff000daf991500000000
[ 60.345] (II) fglrx(0): 07140103802213780a3d9594564f8e28
[ 60.345] (II) fglrx(0): 26505400000001010101010101010101
[ 60.345] (II) fglrx(0): 0101010101017a1d56d250001e303c28
[ 60.345] (II) fglrx(0): 360058c110000018000000fe004e3135
[ 60.345] (II) fglrx(0): 3642332d4c30420a2020000000fe0043
[ 60.345] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 60.345] (II) fglrx(0): 004e31353642332d4c30420a20200048
[ 60.345] (II) fglrx(0): End of Display0 EDID data --------------------
[ 60.351] (II) fglrx(0): EDID for output LVDS
[ 60.351] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.351] (II) fglrx(0): Year: 2010 Week: 7
[ 60.351] (II) fglrx(0): EDID Version: 1.3
[ 60.351] (II) fglrx(0): Digital Display Input
[ 60.351] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.351] (II) fglrx(0): Gamma: 2.20
[ 60.351] (II) fglrx(0): No DPMS capabilities specified
[ 60.351] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.351] (II) fglrx(0): First detailed timing is preferred mode
[ 60.351] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.351] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.351] (II) fglrx(0): Manufacturer's mask: 0
[ 60.351] (II) fglrx(0): Supported detailed timing:
[ 60.351] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.351] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.351] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): CMO
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): EDID (in hex):
[ 60.351] (II) fglrx(0): 00000000000000003a20454449442028
[ 60.351] (II) fglrx(0): 696e20686578293a0a002020000a0028
[ 60.351] (II) fglrx(0): 26505400000001015100000000000000
[ 60.351] (II) fglrx(0): 00000000000000003a20466972737420
[ 60.351] (II) fglrx(0): 64657461696c65642074696d696e6720
[ 60.351] (II) fglrx(0): 697320707265666572726564206d6f64
[ 60.351] (II) fglrx(0): 650a000a0020202020202020000000fe
[ 60.351] (II) fglrx(0): 004e31353642332d4100000000000000
[ 60.351] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 60.351] (II) fglrx(0): Printing DDC gathered Modelines:
[ 60.351] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Printing probed modes for output LVDS
[ 60.351] (II) fglrx(0): Modeline "1366x768"x60.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1360x768"x60.0 75.46 1360 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x768"x60.0 75.46 1280 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x720"x60.0 75.46 1280 1426 1466 1576 720 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x768"x60.0 75.46 1024 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x600"x60.0 75.46 1024 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x600"x60.0 75.46 800 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x480"x60.0 75.46 800 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "640x480"x60.0 75.46 640 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): EDID for output DFP1
[ 60.351] (II) fglrx(0): EDID for output CRT1
[ 60.351] (II) fglrx(0): Output LVDS connected
[ 60.351] (II) fglrx(0): Output DFP1 disconnected
[ 60.351] (II) fglrx(0): Output CRT1 disconnected
[ 60.351] (II) fglrx(0): Using exact sizes for initial modes
[ 60.351] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 60.351] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 60.351] (II) fglrx(0): DPI set to (102, 102)
[ 60.351] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 2 configurable heads and 1 displays connected.
[ 60.351] (==) fglrx(0): PseudoColor visuals disabled
[ 60.351] (II) Loading sub module "ramdac"
[ 60.351] (II) LoadModule: "ramdac"
[ 60.351] (II) Module "ramdac" already built-in
[ 60.352] (==) fglrx(0): NoDRI = NO
[ 60.352] (==) fglrx(0): Capabilities: 0x00000000
[ 60.352] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 60.352] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 60.352] (==) fglrx(0): UseFastTLS=0
[ 60.352] (==) fglrx(0): BlockSignalsOnLock=1
[ 60.352] (--) Depth 24 pixmap format is 32 bpp
[ 60.352] (II) Loading extension ATIFGLRXDRI
[ 60.352] (II) fglrx(0): doing swlDriScreenInit
[ 60.352] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 60.352] ukiOpenDevice: node name is /dev/ati/card0
[ 60.352] ukiOpenDevice: open result is 15, (OK)
[ 60.352] ukiOpenByBusid: ukiOpenMinor returns 15
[ 60.352] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 60.352] (II) fglrx(0): [uki] DRM interface version 1.0
[ 60.352] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 60.352] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x8e000
[ 60.352] (II) fglrx(0): [uki] mapped SAREA 0x8e000 to 0x7faa77519000
[ 60.352] (II) fglrx(0): [uki] framebuffer handle = 0x8f000
[ 60.352] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 60.352] (II) fglrx(0): swlDriScreenInit done
[ 60.352] (II) fglrx(0): Kernel Module Version Information:
[ 60.352] (II) fglrx(0): Name: fglrx
[ 60.352] (II) fglrx(0): Version: 8.85.6
[ 60.352] (II) fglrx(0): Date: Apr 19 2011
[ 60.352] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 60.352] (II) fglrx(0): Kernel Module version matches driver.
[ 60.352] (II) fglrx(0): Kernel Module Build Time Information:
[ 60.352] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-ARCH
[ 60.352] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 60.352] (II) fglrx(0): Build-Kernel __SMP__: no
[ 60.352] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 60.352] (II) fglrx(0): [uki] register handle = 0x00090000
[ 60.369] (II) fglrx(0): DRI initialization successfull
[ 60.369] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 60.369] (==) fglrx(0): Backing store disabled
[ 60.369] (II) Loading extension FGLRXEXTENSION
[ 60.369] (**) fglrx(0): DPMS enabled
[ 60.369] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 60.369] (**) fglrx(0): Textured Video is enabled.
[ 60.369] (II) LoadModule: "glesx"
[ 60.370] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 60.370] (II) Module glesx: vendor="X.Org Foundation"
[ 60.370] compiled for 1.4.99.906, module version = 1.0.0
[ 60.370] (II) Loading extension GLESX
[ 60.370] (II) fglrx(0): GLESX enableFlags = 592
[ 60.370] (II) fglrx(0): GLESX is enabled
[ 60.370] (II) LoadModule: "amdxmm"
[ 60.371] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 60.371] (II) Module amdxmm: vendor="X.Org Foundation"
[ 60.371] compiled for 1.4.99.906, module version = 2.0.0
[ 60.380] (II) Loading extension AMDXVOPL
[ 60.380] (II) Loading extension AMDXVBA
[ 60.381] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 60.384] (II) fglrx(0): Enable composite support successfully
[ 60.384] (WW) fglrx(0): Option "VendorName" is not used
[ 60.384] (WW) fglrx(0): Option "ModelName" is not used
[ 60.384] (II) fglrx(0): X context handle = 0x1
[ 60.384] (II) fglrx(0): [DRI] installation complete
[ 60.384] (==) fglrx(0): Silken mouse enabled
[ 60.384] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 60.384] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 60.384] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 60.384] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 61.343] (--) RandR disabled
[ 61.343] (II) Initializing built-in extension Generic Event Extension
[ 61.343] (II) Initializing built-in extension SHAPE
[ 61.343] (II) Initializing built-in extension MIT-SHM
[ 61.343] (II) Initializing built-in extension XInputExtension
[ 61.343] (II) Initializing built-in extension XTEST
[ 61.343] (II) Initializing built-in extension BIG-REQUESTS
[ 61.343] (II) Initializing built-in extension SYNC
[ 61.343] (II) Initializing built-in extension XKEYBOARD
[ 61.343] (II) Initializing built-in extension XC-MISC
[ 61.343] (II) Initializing built-in extension SECURITY
[ 61.343] (II) Initializing built-in extension XINERAMA
[ 61.343] (II) Initializing built-in extension XFIXES
[ 61.343] (II) Initializing built-in extension RENDER
[ 61.343] (II) Initializing built-in extension RANDR
[ 61.343] (II) Initializing built-in extension COMPOSITE
[ 61.343] (II) Initializing built-in extension DAMAGE
[ 61.345] ukiDynamicMajor: found major device number 252
[ 61.346] ukiDynamicMajor: found major device number 252
[ 61.346] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 61.346] ukiOpenDevice: node name is /dev/ati/card0
[ 61.346] ukiOpenDevice: open result is 16, (OK)
[ 61.346] ukiOpenByBusid: ukiOpenMinor returns 16
[ 61.346] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 61.456] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 61.472] (II) fglrx(0): Enable the clock gating!
[ 61.473] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 61.607] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 61.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.607] (II) LoadModule: "evdev"
[ 61.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (II) Module evdev: vendor="X.Org Foundation"
[ 61.608] compiled for 1.10.0, module version = 2.6.0
[ 61.608] Module class: X.Org XInput Driver
[ 61.608] ABI class: X.Org XInput driver, version 12.2
[ 61.608] (II) Using input driver 'evdev' for 'Power Button'
[ 61.608] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (**) Power Button: always reports core events
[ 61.608] (**) Power Button: Device: "/dev/input/event5"
[ 61.630] (--) Power Button: Found keys
[ 61.630] (II) Power Button: Configuring as keyboard
[ 61.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 61.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 61.630] (**) Option "xkb_rules" "evdev"
[ 61.630] (**) Option "xkb_model" "evdev"
[ 61.630] (**) Option "xkb_layout" "us"
[ 61.670] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 61.670] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 61.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 61.670] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.670] (**) Video Bus: always reports core events
[ 61.670] (**) Video Bus: Device: "/dev/input/event6"
[ 61.686] (--) Video Bus: Found keys
[ 61.686] (II) Video Bus: Configuring as keyboard
[ 61.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input6/event6"
[ 61.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 61.686] (**) Option "xkb_rules" "evdev"
[ 61.686] (**) Option "xkb_model" "evdev"
[ 61.686] (**) Option "xkb_layout" "us"
[ 61.983] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 61.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.983] (II) Using input driver 'evdev' for 'Power Button'
[ 61.983] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.984] (**) Power Button: always reports core events
[ 61.984] (**) Power Button: Device: "/dev/input/event2"
[ 62.000] (--) Power Button: Found keys
[ 62.000] (II) Power Button: Configuring as keyboard
[ 62.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 62.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 62.000] (**) Option "xkb_rules" "evdev"
[ 62.000] (**) Option "xkb_model" "evdev"
[ 62.000] (**) Option "xkb_layout" "us"
[ 62.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 62.000] (II) No input driver/identifier specified (ignoring)
[ 62.000] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 62.000] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62.000] (II) Using input driver 'evdev' for 'Sleep Button'
[ 62.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.001] (**) Sleep Button: always reports core events
[ 62.001] (**) Sleep Button: Device: "/dev/input/event3"
[ 62.040] (--) Sleep Button: Found keys
[ 62.040] (II) Sleep Button: Configuring as keyboard
[ 62.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 62.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 62.040] (**) Option "xkb_rules" "evdev"
[ 62.040] (**) Option "xkb_model" "evdev"
[ 62.040] (**) Option "xkb_layout" "us"
[ 62.044] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event9)
[ 62.044] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.044] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.044] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.044] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.044] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event9"
[ 62.066] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.066] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input9/event9"
[ 62.066] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.066] (**) Option "xkb_rules" "evdev"
[ 62.066] (**) Option "xkb_model" "evdev"
[ 62.066] (**) Option "xkb_layout" "us"
[ 62.067] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event10)
[ 62.067] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.067] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.067] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.067] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.067] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event10"
[ 62.093] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 62.093] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 62.093] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.093] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 62.093] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 62.093] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input10/event10"
[ 62.093] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.093] (**) Option "xkb_rules" "evdev"
[ 62.093] (**) Option "xkb_model" "evdev"
[ 62.093] (**) Option "xkb_layout" "us"
[ 62.093] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 62.093] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 62.094] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 62.094] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 62.094] (II) No input driver/identifier specified (ignoring)
[ 62.095] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event14)
[ 62.095] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 62.095] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 62.095] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.095] (**) Razer Razer DeathAdder: always reports core events
[ 62.095] (**) Razer Razer DeathAdder: Device: "/dev/input/event14"
[ 62.120] (--) Razer Razer DeathAdder: Found 12 mouse buttons
[ 62.120] (--) Razer Razer DeathAdder: Found scroll wheel(s)
[ 62.120] (--) Razer Razer DeathAdder: Found relative axes
[ 62.120] (--) Razer Razer DeathAdder: Found x and y relative axes
[ 62.120] (II) Razer Razer DeathAdder: Configuring as mouse
[ 62.120] (II) Razer Razer DeathAdder: Adding scrollwheel support
[ 62.120] (**) Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 62.120] (**) Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14/event14"
[ 62.120] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE)
[ 62.120] (II) Razer Razer DeathAdder: initialized for relative axes.
[ 62.120] (**) Razer Razer DeathAdder: (accel) keeping acceleration scheme 1
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration profile 0
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 62.120] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse1)
[ 62.120] (II) No input driver/identifier specified (ignoring)
[ 62.121] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)
[ 62.121] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 62.121] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 62.121] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.121] (**) 1.3M WebCam: always reports core events
[ 62.121] (**) 1.3M WebCam: Device: "/dev/input/event8"
[ 62.146] (--) 1.3M WebCam: Found keys
[ 62.146] (II) 1.3M WebCam: Configuring as keyboard
[ 62.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8/event8"
[ 62.146] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
[ 62.146] (**) Option "xkb_rules" "evdev"
[ 62.146] (**) Option "xkb_model" "evdev"
[ 62.146] (**) Option "xkb_layout" "us"
[ 62.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.147] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.148] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[ 62.148] (II) No input driver/identifier specified (ignoring)
[ 62.149] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 62.149] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.149] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 62.149] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.149] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.149] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 62.173] (--) AT Translated Set 2 keyboard: Found keys
[ 62.173] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 62.173] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 62.173] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 62.173] (**) Option "xkb_rules" "evdev"
[ 62.173] (**) Option "xkb_model" "evdev"
[ 62.173] (**) Option "xkb_layout" "us"
[ 62.174] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 62.174] (II) LoadModule: "synaptics"
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (II) Module synaptics: vendor="X.Org Foundation"
[ 62.174] compiled for 1.10.2, module version = 1.4.0
[ 62.174] Module class: X.Org XInput Driver
[ 62.174] ABI class: X.Org XInput driver, version 12.2
[ 62.174] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.174] (**) Option "Device" "/dev/input/event7"
[ 62.306] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[ 62.306] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[ 62.306] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 62.306] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 62.306] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 62.306] (**) Option "TapButton1" "1"
[ 62.306] (**) Option "TapButton2" "2"
[ 62.306] (**) Option "TapButton3" "3"
[ 62.413] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.413] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 62.466] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 62.466] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 62.466] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 62.466] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 62.546] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.547] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.559] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 62.905] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 62.905] (II) fglrx(0): Printing DDC gathered Modelines:
[ 62.905] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.015] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 76.015] (II) fglrx(0): Printing DDC gathered Modelines:
[ 76.015] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.610] Warning: LookupWindow()/SecurityLookupWindow() are deprecated. Please convert your driver/module to use dixLookupWindow().And here is my xorg.conf file , basically it's the same at aticonfig --initial , i didn't change anything yet
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionIf anyone knows what's going on , and how i can disappear those messages , and if someone has any suggestions i would be grateful if you could help me out .
Thanks in advance !!!
Offline