You are not logged in.
Wireless card Atheros AR5001
The problem I am having is that I can see my wireless network when scanning
wlan0 Scan completed :
Cell 01 - Address: 00:18:F8:7C:E8:54
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=46/70 Signal level=-64 dBm
Encryption key:on
ESSID:"Mshome"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=0000000e18cbc036
Extra: Last beacon: 93ms ago
IE: Unknown: 00064D73686F6D65
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0104
IE: Unknown: 2F0104
IE: Unknown: 32040C121860
IE: Unknown: DD090010180200F5000000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
However when using netcfg with the following profile
CONNECTION='wireless'
DESCRIPTION='A simple WPA encrypted wireless connection'
INTERFACE='wlan0'
SECURITY='wpa'
ESSID='MsHome'
KEY='...'
IP='dhcp'
TIMEOUT='60'
I get the following output
:: home up [BUSY]
> WPA Authentication/Association Failed
[FAIL]
Oddly turning off the network security and using the following profile for netcfg results in the same error.
CONNECTION='wireless'
DESCRIPTION='A simple opened wireless connection'
INTERFACE='wlan0'
SECURITY='none'
ESSID='MsHome'
IP='dhcp'
TIMEOUT='60'
Thoughts?
Last edited by fierydemise (2011-06-07 06:12:45)
Offline
<Snip>
wlan0 Scan completed : Cell 01 - Address: 00:18:F8:7C:E8:54 <Snip> ESSID:"Mshome" <snip>
However when using netcfg with the following profile
CONNECTION='wireless' <Snip> ESSID='MsHome' <Snip>
<Snip>
Thoughts?
ESSIDs are case sensitive
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
Wow, can't believe I missed that one. Thanks.
Offline