Arch Linux

shaurz

Member

Registered: 2004-02-02

Posts: 358

Printer stopped working - Samsung ML-2010 [Fixed]

My printer (Samsung ML-2010) has always worked fine, but now it suddenly doesn't work.

Here is the tail of everything.log:

Jun 12 20:35:02 alpha kernel: [16997.071655] usb 5-2: new full speed USB device number 3 using uhci_hcd                                                                                                                                      
Jun 12 20:35:03 alpha mtp-probe: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2"                                                                                                                                   
Jun 12 20:35:03 alpha mtp-probe: bus: 5, device: 3 was not an MTP device                                                                                                                                                                     
Jun 12 20:35:03 alpha mtp-probe: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2"                                                                                                                                   
Jun 12 20:35:03 alpha mtp-probe: bus: 5, device: 3 was not an MTP device                                                                                                                                                                     
Jun 12 20:35:03 alpha udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0                                                                                                                                          
Jun 12 20:35:03 alpha udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/usb/lp1                                                                                                                                  
Jun 12 20:35:03 alpha kernel: [16997.372454] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
Jun 12 20:35:03 alpha kernel: [16997.372474] usbcore: registered new interface driver usblp
Jun 12 20:35:03 alpha udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.0/usb5/5-2
Jun 12 20:35:03 alpha udev-configure-printer: Device vendor/product is 04E8:326C
Jun 12 20:35:03 alpha udev-configure-printer: failed to claim interface
Jun 12 20:35:03 alpha udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jun 12 20:35:03 alpha udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.0/usb5/5-2
Jun 12 20:35:03 alpha udev-configure-printer: MFG:Samsung MDL:ML-2010 SERN:- serial:3A37BKEYA21816D.
Jun 12 20:35:04 alpha udev-configure-printer: no corresponding CUPS device found
Jun 12 20:35:04 alpha kernel: [16998.388750] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1

I've tried removing and re-adding the printer, but now CUPS doesn't detect any printers.

Last edited by shaurz (2011-06-12 20:33:54)

shaurz

Member

Registered: 2004-02-02

Posts: 358

Re: Printer stopped working - Samsung ML-2010 [Fixed]

I've fixed it now. I uninstalled foomatic, installed splix and it detected the printer after rebooting.