kernel 2.6.39.1 poweroff wait more then 10 seconds

dlin · 2011-06-15 23:35:12

I found after upgrade, I must manual press the power button to turn off my eeepc.
The shutdown processs display 'POWER OFF' then seems hang there.

How to trace this problem?

grub menu.lst
==========
kernel /vmlinuz26 root=/dev/disk/by-uuid/xxx ro
initrd /kernel26.img

rc.conf
=====
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave)
DAEMONS=(hwclock @syslog-ng !network !netfs @crond acpid dbus wicd cpufreq \
smartd fluidsynth esd gpm healthd eeepc-restore sensors sensord \
sysstat )

useradded · 2011-06-16 08:13:31

I have started experiencing exactly this behaviour on my 1001p as well.

stripwax · 2011-06-16 09:14:21

I posted this in the 'package upgrade issues' forum but maybe it belongs better here:
https://bbs.archlinux.org/viewtopic.php?id=120890

For me, reboot / shutdown -r hangs. This is with kernel 2.6.39.1-1 (worked fine with 2.6.38.7-1), on hardware which is also Intel Atom, like yours above.

[Edit] - my issue might be different

Last edited by stripwax (2011-06-16 20:52:09)

stripwax · 2011-06-16 09:19:38

@dlin/@useradd : Can you confirm that the behaviour reverts back to normal when downgrading *just* kernel26 package to 2.6.38.7-1 or similar prior version? (i.e. leaving all other packages at their current versions).

stripwax · 2011-06-16 09:35:37

Also, this may be related: https://bugzilla.kernel.org/show_bug.cgi?id=33302
This appears to have been fixed during 2.6.39 development and is already listed in the changelog for 2.6.39 . It would be interesting to know if kernel 2.6.39 works where 2.6.39.1 doesn't work.

Last edited by stripwax (2011-06-16 10:10:50)

zenlord · 2011-06-16 13:53:49

I cannot find the thread I recently read about a similar problem. The last posts in that thread suggested that it was related to the e1000e-module. Adding
rmmod e1000e
to a shutdown-script helped all of the people who experienced that bug.

stlarch · 2011-06-16 14:16:44

Here's a link to that post, I think, https://bbs.archlinux.org/viewtopic.php?id=113985&p=5 , mentioned by zenlord.

Last edited by stlarch (2011-06-16 14:17:21)

dlin · 2011-06-16 15:18:07

I don't think 'rmmod e1000e' workable.
Because, I don't have such module in my 'lsmod' listing.

Here is my module listing.

Module Size Used by
cryptd 6901 0
aes_i586 6948 3
aes_generic 25678 1 aes_i586
ipv6 249260 22
snd_seq 41632 1
snd_seq_device 4388 1 snd_seq
arc4 1094 2
ecb 1645 2
snd_hda_codec_realtek 225687 1
ath9k 71036 0
i915 557262 2
snd_hda_intel 19261 7
mac80211 189758 1 ath9k
joydev 7535 0
snd_hda_codec 66793 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4919 1 snd_hda_codec
ath9k_common 1648 1 ath9k
eeepc_wmi 1791 0
ath9k_hw 276852 2 ath9k,ath9k_common
drm_kms_helper 24245 1 i915
asus_wmi 11412 1 eeepc_wmi
snd_pcm 60311 4 snd_hda_intel,snd_hda_codec
sparse_keymap 2636 1 asus_wmi
ath 11679 2 ath9k,ath9k_hw
drm 147653 3 i915,drm_kms_helper
btusb 9897 0
cfg80211 126962 3 ath9k,mac80211,ath
snd_timer 15542 4 snd_seq,snd_pcm
pci_hotplug 21978 1 asus_wmi
uvcvideo 55020 0
iTCO_wdt 10333 0
sg 21022 0
bluetooth 115465 1 btusb
videodev 70734 1 uvcvideo
snd 43527 19 snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
serio_raw 3430 0
iTCO_vendor_support 1553 1 iTCO_wdt
intel_agp 8664 1 i915
i2c_algo_bit 4431 1 i915
cpufreq_powersave 714 0
cpufreq_ondemand 5064 2
psmouse 55927 0
i2c_i801 7039 0
pcspkr 1415 0
media 8545 1 videodev
evdev 7310 8
i2c_core 16665 6 i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801
rfkill 12510 3 asus_wmi,cfg80211,bluetooth
atl1e 24804 0
acpi_cpufreq 5053 1
intel_gtt 11417 3 i915,intel_agp
battery 8905 0
soundcore 5018 1 snd
wmi 7367 1 asus_wmi
thermal 6603 0
ac 2545 0
freq_table 2055 2 cpufreq_ondemand,acpi_cpufreq
button 3654 1 i915
agpgart 22160 3 drm,intel_agp,intel_gtt
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
video 9852 1 i915
processor 21884 1 acpi_cpufreq
mperf 1035 1 acpi_cpufreq
usb_storage 34863 3
sd_mod 25515 3
uhci_hcd 19344 0
ata_piix 18569 0
pata_acpi 2396 0
libata 154349 2 ata_piix,pata_acpi
ehci_hcd 34847 0
scsi_mod 110670 4 sg,usb_storage,sd_mod,libata
usbcore 119004 6 btusb,uvcvideo,usb_storage,uhci_hcd,ehci_hcd
ext4 334626 0
mbcache 4321 1 ext4
jbd2 59098 1 ext4
crc16 1077 2 bluetooth,ext4
reiserfs 225070 1
piix 4060 0
ide_core 78619 1 piix

stripwax · 2011-06-16 15:46:54

My recollection of the e1000e issue was that it affected x64 systems only, and i think above are all x86 only (although could be wrong).

useradded · 2011-06-18 10:37:47

I'm away from my Arch machines at the moment, but I can confirm my 1001p is x86_64, if that helps at all.

Butcher · 2011-06-19 11:27:03

I'm having this as well on a Compaq 610, downgrading to kernel26-lts didn't help at all

Arch Linux

#1 2011-06-15 23:35:12

kernel 2.6.39.1 poweroff wait more then 10 seconds

#2 2011-06-16 08:13:31

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#3 2011-06-16 09:14:21

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#4 2011-06-16 09:19:38

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#5 2011-06-16 09:35:37

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#6 2011-06-16 13:53:49

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#7 2011-06-16 14:16:44

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#8 2011-06-16 15:18:07

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#9 2011-06-16 15:46:54

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#10 2011-06-18 10:37:47

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

#11 2011-06-19 11:27:03

Re: kernel 2.6.39.1 poweroff wait more then 10 seconds

Board footer