unofficial linux-ck repo with cpu optimized packages is ONLINE

graysky · 2011-07-13 23:12:14

Try refreshing now... pacman -Syy && pacman -Syu

Dethredic · 2011-07-14 00:54:23

thanks, all fixed.

Meyithi · 2011-07-15 00:05:58

Just wanted to say thanks to graysky for his work on this. I used to compile my own -atom kernels for my netbook but decided to try the CK patchset which I was initially wary off concerning power usage. My netbook with kernel26-ck-atom x86-64 is absolutely flying, just feels more responsive all over and I've not noticed any additional power drain and still get 6hrs + out of my netbook on the road.

graysky · 2011-07-15 01:04:34

@Mey - you're welcome. Glad to hear you're happy with the packages. Yeah, ck claims you actually get greater battery life using his scheduler as I recall. BTW, I am re-uploading the packages now based on xclaude's comments (page 13).

Zom · 2011-07-15 01:38:34

kernel26-ck-k8-1:2.6.39.3-2 might need a reupload too, by the way.

graysky · 2011-07-15 08:42:15

@Zom - try it now. I confirmed all files by sha224sum. Giant pain in the ass: upload 655 MB, download the same 655 MB. Compare sha224sums

http://pastebin.com/cPe15qnZ

Last edited by graysky (2011-07-15 08:45:53)

Zom · 2011-07-15 09:20:56

Yup, works. Thanks!

pshr · 2011-07-15 12:25:42

Some issues when updating today, im running the kernel26-ck-core2 build.

_ pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
kernel26-ck is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: kernel26-ck-core2 and kernel26-ck are in conflict

Thanks.

graysky · 2011-07-15 19:53:03

@pshr - an unfortunate side effect from fixing the dependency issue I'm afraid; It is however easily fixed

# pacman -S ck-core2
:: There are 4 members in group ck-core2:
:: Repository kernel26-ck
   1) broadcom-wl-ck-core2  2) kernel26-ck-core2  3) kernel26-ck-core2-headers  4) nvidia-ck-core2

Enter a selection (default=all): 2
resolving dependencies...
looking for inter-conflicts...
:: kernel26-ck-core2 and kernel26-ck are in conflict. Remove kernel26-ck? [y/N]

EDIT: what's odd is that on one of my core2 machines using the repo packages, the upgrade went off without a hitch?!

$ pp
[#1 SIZE:256.0KiB/35.6MiB(0%) CN:1 SPD:458.6KiBs ETA:01m19s](4more...) [TOTAL SPD:1.1MiBs]                         
2011-07-15 17:23:54.800629 NOTICE - Download complete: /var/cache/pacman/pkg/libcups-1.4.7-2-x86_64.pkg.tar.xz
[#1 SIZE:2.3MiB/35.6MiB(6%) CN:1 SPD:428.9KiBs ETA:01m19s](3more...) [TOTAL SPD:1.6MiBs]                           
2011-07-15 17:23:59.732714 NOTICE - Download complete: /var/cache/pacman/pkg/nvidia-ck-core2-275.09.07-2-x86_64.pkg.tar.xz
[#1 SIZE:5.5MiB/35.6MiB(15%) CN:1 SPD:538.4KiBs ETA:57s](2more...) [TOTAL SPD:1.3MiBs]                             
2011-07-15 17:24:05.312489 NOTICE - Download complete: /var/cache/pacman/pkg/kernel26-ck-core2-headers-1:2.6.39.3-2-x86_64.pkg.tar.xz
[#1 SIZE:8.3MiB/35.6MiB(23%) CN:1 SPD:586.3KiBs ETA:47s](1more...) [TOTAL SPD:1.1MiBs]                             
2011-07-15 17:24:09.332749 NOTICE - Download complete: /var/cache/pacman/pkg/python-3.2.1-1-x86_64.pkg.tar.xz
[#1 SIZE:35.1MiB/35.6MiB(98%) CN:1 SPD:723.7KiBs]                                                                  
2011-07-15 17:24:46.113835 NOTICE - Download complete: /var/cache/pacman/pkg/kernel26-ck-core2-1:2.6.39.3-2-x86_64.pkg.tar.xz

Download Results:
gid|stat|avg speed  |path/URI
===+====+===========+===========================================================
  4|  OK| 316.8KiB/s|/var/cache/pacman/pkg/libcups-1.4.7-2-x86_64.pkg.tar.xz
  3|  OK| 713.6KiB/s|/var/cache/pacman/pkg/nvidia-ck-core2-275.09.07-2-x86_64.pkg.tar.xz
  2|  OK| 377.6KiB/s|/var/cache/pacman/pkg/kernel26-ck-core2-headers-1:2.6.39.3-2-x86_64.pkg.tar.xz
  5|  OK| 632.4KiB/s|/var/cache/pacman/pkg/python-3.2.1-1-x86_64.pkg.tar.xz
  1|  OK| 698.0KiB/s|/var/cache/pacman/pkg/kernel26-ck-core2-1:2.6.39.3-2-x86_64.pkg.tar.xz

Status Legend:
 (OK):download completed.
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
 kernel26-ck is up to date
 multilib is up to date
 router                                       1.9K  754.0K/s 00:00:00 [######################################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...

Targets (5): kernel26-ck-core2-1:2.6.39.3-2  kernel26-ck-core2-headers-1:2.6.39.3-2  libcups-1.4.7-2
             nvidia-ck-core2-275.09.07-2  python-3.2.1-1

Total Download Size:    0.00 MB
Total Installed Size:   168.03 MB

Proceed with installation? [Y/n] 
(5/5) checking package integrity                                      [######################################] 100%
(5/5) checking for file conflicts                                     [######################################] 100%
(1/5) upgrading kernel26-ck-core2                                     [######################################] 100%
>>> Updating module dependencies. Please wait ...
>>> MKINITCPIO SETUP
>>> ----------------
>>> If you use LVM2, Encrypted root or software RAID,
>>> Ensure you enable support in /etc/mkinitcpio.conf .
>>> More information about mkinitcpio setup can be found here:
>>> http://wiki.archlinux.org/index.php/Mkinitcpio

>>> Generating initial ramdisk, using mkinitcpio.  Please wait...
==> Building image from preset: 'default'
  -> -k 2.6.39-ck -c /etc/mkinitcpio.conf -g /boot/kernel26-ck.img
==> Starting build: 2.6.39-ck
  -> Parsing hook: [base]
  -> Parsing hook: [udev]
  -> Parsing hook: [sata]
  -> Parsing hook: [filesystems]
==> Generating module dependencies
==> Creating lzop initcpio image: /boot/kernel26-ck.img
13611 blocks
==> Image generation successful
==> Building image from preset: 'fallback'
  -> -k 2.6.39-ck -c /etc/mkinitcpio.conf -g /boot/kernel26-ck-fallback.img -S autodetect
==> Starting build: 2.6.39-ck
  -> Parsing hook: [base]
  -> Parsing hook: [udev]
  -> Parsing hook: [sata]
  -> Parsing hook: [filesystems]
==> Generating module dependencies
==> Creating lzop initcpio image: /boot/kernel26-ck-fallback.img
13611 blocks
==> Image generation successful
Changelog for new kernel release at http://kernelnewbies.org/Linux_2_6_39
(2/5) upgrading kernel26-ck-core2-headers                             [######################################] 100%
(3/5) upgrading libcups                                               [######################################] 100%
(4/5) upgrading nvidia-ck-core2                                       [######################################] 100%
ERROR: Module nvidia is in use
In order to use the new nvidia module, exit Xserver and unload it manually.
(5/5) upgrading python                                                [######################################] 100%
New optional dependencies for python
    sqlite3

Last edited by graysky (2011-07-15 21:31:11)

pshr · 2011-07-16 13:10:01

Weird indeed, got it fixed however with your suggestion

theringmaster · 2011-07-17 15:19:12

I'm getting some trouble when compiling the virtualbox modules with the latest update

http://www.pastie.org/2227081

Zom · 2011-07-17 16:10:06

Which of the packages are you using? It builds fine for me on k8.

graysky · 2011-07-17 16:16:33

theringmaster wrote:

I'm getting some trouble when compiling the virtualbox modules with the latest update
http://www.pastie.org/2227081

Are you sure you have the corresponding kernel26-ck-xxx-headers package installed?

theringmaster · 2011-07-17 17:09:08

I am using the k10 packages (kernel, headers and nvidia module)

I'm trying to recompile the virtualbox 4.0.12_OSE modules

Last edited by theringmaster (2011-07-17 17:26:41)

graysky · 2011-07-17 18:43:44

Is virtualbox 4.0.12_OSE the same PKG as community/virtualbox? Also, are you doing it via /etc/rc.d/vboxdrv setup ?

EDIT: I installed the repo core2 package (x86_64) and it built up just fine...

# /etc/rc.d/vboxdrv setup
:: Unloading VirtualBox kernel modules                                                                      [DONE] 
:: Removing old VirtualBox netadp kernel module                                                             [DONE] 
:: Removing old VirtualBox netflt kernel module                                                             [DONE] 
:: Removing old VirtualBox kernel module                                                                    [DONE] 
:: Recompiling VirtualBox kernel modules                                                                    [DONE] 
:: Reloading VirtualBox kernel modules                                                                      [DONE]

EDIT: Interesting... it works under x86_64 but not under i686.

Zom wrote:

Which of the packages are you using? It builds fine for me on k8.

Zom - are you using x86_64 or i686? We know that theringmaster is using i686 and it isn't working for him... I compared both the .config and the PKGBUILD for x86_64 and i686 and they differ only where they are supposed to differ. I can't think why virtualbox would behave this way under i686 but not under x86_64.

EDIT2: Is your problem related to this thread somehow?

Last edited by graysky (2011-07-18 19:56:38)

graysky · 2011-07-19 20:42:48

OK! I found the source of the problem building the virtualbox drivers on i686 with the repo packages and corrected it. The problem seems to be stemmed from the fact that I was cross compiling using the gcc-multilib packages. When I went back to compiling i686 under a native i686 chroot, the virtualbox modules built just fine for me on two test machines (generic and core2). I can't explain why but it's fixed now.

@theringmaster - please try the repo packages for k10 in about an hour when they will be online and let me know if this fixes your issues. As always, thank you for reporting them!

EDIT: OK, should be online now.

Last edited by graysky (2011-07-20 00:22:37)

theringmaster · 2011-07-20 01:54:31

thanks graysky, that fixed it.. rocking with vbox 4.1 now!

swanson · 2011-07-20 04:25:26

New k10 packages also fixed install of vhba-module. Also fixed compile of the module but seems not to be needed, ususal install seems to work fine.

graysky · 2011-07-20 08:35:02

Great, glad to hear things are back to normal. Enjoy!

mah0 · 2011-07-20 15:35:05

After switching to kernel26-ck (ck-core2 i686 from repo) my system fails to boot at "Mounting local filesystems" stage. It shows a lot of text but I don't know where to find logs. I just noticed 1 line:

BUG: scheduling while atomic: mount.ntfs-3g/477/0x10000002

/etc/fstab:

#
# /etc/fstab: static file system information
#
# <file system>        <dir>         <type>    <options>          <dump> <pass>
devpts                 /dev/pts      devpts    defaults            0      0
shm                    /dev/shm      tmpfs     nodev,nosuid        0      0
UUID=5eded275-ad12-4ecc-99a5-06764fd0ebfe /home ext4 defaults,noatime 0 1
UUID=cb5e3030-83f1-474e-b52f-28d0f5e8eb88 / ext4 defaults,noatime 0 1
UUID=18733F7E71B71A0E    /media/music        ntfs-3g        defaults    0 0
UUID=2AAC0B54AC0B19C9  /media/xp            ntfs-3g        defaults    0 0
UUID=046AD7A81EA549D6    /media/file            ntfs-3g        defaults    0 0
UUID=47960A1468022086    /media/game            ntfs-3g        defaults    0 0
UUID=54184E74793A0FA5    /media/250            ntfs-3g        defaults    0 0

graysky · 2011-07-20 23:13:02

@mah0 - not sure what to think about what you've posted. Logs are under /var/log - most relevant one I think is /var/log/dmesg.log

Note that that file gets overwritten each time you boot, so if you boot into another kernel, you'll overwrite it and any debug info. Do this:

1) After the crash, boot to a live CD
2) Mount the partition that contains /var from the live CD
3) Copy the dmesg.log to a new filename and post it to pastebin so we can see it

swanson · 2011-07-21 06:52:51

Hey Greysky! This thread seems to grow a lot and is becoming way too diverse. Is there a way we can organize all questions concering ck kernels and your great packages in a more structured way? A new forum index cathegory? Whatever gets the job done.

I know it's OT but I know I'll reach the rigth people this way.

graysky · 2011-07-21 08:28:29

@swanson - Good observation. Wish I had an equally good answer! I guess the best way to keep the signal-to-noise ratio up for this particular thread is to depend on the users to open new threads with good titles when they have problems that aren't directly related to the repo. Recent examples:

kernel26-ck-core2 [solved] help - by johan1391
[Kernel26-ck]Need some tips by Ypnose
[SOLVED] Kernel26-ck I/O scheduler bfq not found error by twilight0

swanson · 2011-07-21 08:58:18

OK. Seems the best way.

mah0 · 2011-07-21 10:03:10

graysky,
Here is my dmesg.log. But there are no errors I get during boot process. I've found that all errors appears during execution rc.sysinit script, but I don't know how to log its output.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable)
[    0.000000]  BIOS-e820: 00000000b7fb0000 - 00000000b7fbe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000b7fbe000 - 00000000b7ff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: System Manufacturer IL9 Pro/IL9 Pro, BIOS 080012  09/17/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xb7fb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF0000000 write-back
[    0.000000]   3 base 0B0000000 mask FF8000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 7fde3000 - 7fff0000
[    0.000000] Allocated new RAMDISK: 375f1000 - 377fd13a
[    0.000000] Move RAMDISK from 000000007fde3000 - 000000007ffef139 to 375f1000 - 377fd139
[    0.000000] ACPI: RSDP 000f93b0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT b7fb0000 00038 (v01 AAMMII OEMRSDT  09000717 MSFT 00000097)
[    0.000000] ACPI: FACP b7fb0200 00084 (v02 AAMMII OEMFACP  09000717 MSFT 00000097)
[    0.000000] ACPI: DSDT b7fb0440 040FC (v01  945PA  945PA30 00000000 INTL 02002026)
[    0.000000] ACPI: FACS b7fbe000 00040
[    0.000000] ACPI: APIC b7fb0390 0006C (v01 AAMMII OEMAPIC  09000717 MSFT 00000097)
[    0.000000] ACPI: MCFG b7fb0400 0003C (v01 AAMMII OEMMCFG  09000717 MSFT 00000097)
[    0.000000] ACPI: OEMB b7fbe040 00047 (v01 AAMMII AMI_OEM  09000717 MSFT 00000097)
[    0.000000] ACPI: SSDT b7fbe9b0 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2055MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000b7fb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000b7fb0
[    0.000000] On node 0 totalpages: 753471
[    0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f5ef0200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4112 pages used for memmap
[    0.000000]   HighMem zone: 522146 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:46e00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27648 r0 d21504 u1048576
[    0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 747583
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/cb5e3030-83f1-474e-b52f-28d0f5e8eb88 ro vga=873
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 12057088 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000b7fb0)
[    0.000000] Memory: 2969144k/3014336k available (3376k kernel code, 44740k reserved, 1390k data, 512k init, 2105032k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc14a8000 - 0xc1528000   ( 512 kB)
[    0.000000]       .data : 0xc134c3bf - 0xc14a7c00   (1390 kB)
[    0.000000]       .text : 0xc1000000 - 0xc134c3bf   (3376 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] CPU 0 irqstacks, hard=f480c000 soft=f480e000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1994.896 MHz processor.
[    0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.03 BogoMIPS (lpj=6649653)
[    0.003350] pid_max: default: 32768 minimum: 301
[    0.003397] Security Framework initialized
[    0.003407] AppArmor: AppArmor disabled by boot time parameter
[    0.003439] Mount-cache hash table entries: 512
[    0.003673] Initializing cgroup subsys ns
[    0.003681] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.003691] Initializing cgroup subsys cpuacct
[    0.003708] Initializing cgroup subsys memory
[    0.003723] Initializing cgroup subsys devices
[    0.003729] Initializing cgroup subsys freezer
[    0.003734] Initializing cgroup subsys net_cls
[    0.003740] Initializing cgroup subsys blkio
[    0.003786] CPU: Physical Processor ID: 0
[    0.003791] CPU: Processor Core ID: 0
[    0.003797] mce: CPU supports 6 MCE banks
[    0.003809] CPU0: Thermal monitoring enabled (TM2)
[    0.003817] using mwait in idle threads.
[    0.004962] ACPI: Core revision 20110316
[    0.010009] ftrace: allocating 15225 entries in 30 pages
[    0.013388] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.013706] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050460] CPU0: Intel(R) Core(TM)2 CPU          4400  @ 2.00GHz stepping 02
[    0.053330] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.053330] PEBS disabled due to CPU errata.
[    0.053330] ... version:                2
[    0.053330] ... bit width:              40
[    0.053330] ... generic registers:      2
[    0.053330] ... value mask:             000000ffffffffff
[    0.053330] ... max period:             000000007fffffff
[    0.053330] ... fixed-purpose events:   3
[    0.053330] ... event mask:             0000000700000003
[    0.070165] NMI watchdog enabled, takes one hw-pmu counter.
[    0.096683] CPU 1 irqstacks, hard=f48f4000 soft=f48f6000
[    0.096687] Booting Node   0, Processors  #1
[    0.096696] smpboot cpu 1: start_ip = 9b000
[    0.006666] Initializing CPU#1
[    0.193360] NMI watchdog enabled, takes one hw-pmu counter.
[    0.199995] Brought up 2 CPUs
[    0.200005] Total of 2 processors activated (7982.00 BogoMIPS).
[    0.201068] devtmpfs: initialized
[    0.201068] PM: Registering ACPI NVS region at b7fbe000 (204800 bytes)
[    0.201129] print_constraints: dummy: 
[    0.201193] NET: Registered protocol family 16
[    0.201313] ACPI: bus type pci registered
[    0.201408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.201417] PCI: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support
[    0.201428] PCI: not using MMCONFIG
[    0.201592] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[    0.201598] PCI: Using configuration type 1 for base access
[    0.203536] bio: create slab <bio-0> at 0
[    0.204278] ACPI: EC: Look up EC in DSDT
[    0.213715] ACPI: Executed 1 blocks of module-level executable AML code
[    0.216468] ACPI: SSDT b7fbe090 00235 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.216694] ACPI: Dynamic OEM Table Load:
[    0.216701] ACPI: SSDT   (null) 00235 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.217015] ACPI: SSDT b7fbe520 00235 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.217244] ACPI: Dynamic OEM Table Load:
[    0.217251] ACPI: SSDT   (null) 00235 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.217526] ACPI: Interpreter enabled
[    0.217537] ACPI: (supports S0 S3 S4 S5)
[    0.217561] ACPI: Using IOAPIC for interrupt routing
[    0.250147] ACPI: No dock devices found.
[    0.250153] HEST: Table not found.
[    0.250159] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.250239] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.250391] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.250395] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.250398] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.250401] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.250404] pci_root PNP0A08:00: host bridge window [mem 0xb8000000-0xffffffff] (ignored)
[    0.250418] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
[    0.250463] pci 0000:00:01.0: [8086:2771] type 1 class 0x000604
[    0.250500] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.250504] pci 0000:00:01.0: PME# disabled
[    0.250550] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.250567] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[    0.250626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.250630] pci 0000:00:1b.0: PME# disabled
[    0.250648] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.250691] pci 0000:00:1d.0: reg 20: [io  0xe080-0xe09f]
[    0.250722] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.250765] pci 0000:00:1d.1: reg 20: [io  0xe000-0xe01f]
[    0.250796] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.250839] pci 0000:00:1d.2: reg 20: [io  0xdc00-0xdc1f]
[    0.250870] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.250913] pci 0000:00:1d.3: reg 20: [io  0xd880-0xd89f]
[    0.250953] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.250973] pci 0000:00:1d.7: reg 10: [mem 0xfebfbc00-0xfebfbfff]
[    0.251047] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.251052] pci 0000:00:1d.7: PME# disabled
[    0.251070] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.251130] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.251219] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.251230] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.251240] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 00ff)
[    0.251279] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.251293] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.251303] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.251313] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.251323] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.251334] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.251369] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.251384] pci 0000:00:1f.2: reg 10: [io  0xec00-0xec07]
[    0.251393] pci 0000:00:1f.2: reg 14: [io  0xe880-0xe883]
[    0.251402] pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
[    0.251411] pci 0000:00:1f.2: reg 1c: [io  0xe480-0xe483]
[    0.251420] pci 0000:00:1f.2: reg 20: [io  0xe400-0xe40f]
[    0.251451] pci 0000:00:1f.2: PME# supported from D3hot
[    0.251455] pci 0000:00:1f.2: PME# disabled
[    0.251469] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.251522] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.251597] pci 0000:01:00.0: [10de:0614] type 0 class 0x000300
[    0.251608] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.251621] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.251633] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.251643] pci 0000:01:00.0: reg 24: [io  0xbc00-0xbc7f]
[    0.251652] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[    0.256668] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.256681] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.256687] pci 0000:00:01.0:   bridge window [mem 0xf8900000-0xfe9fffff]
[    0.256695] pci 0000:00:01.0:   bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
[    0.256749] pci 0000:02:05.0: [10ec:8167] type 0 class 0x000200
[    0.256780] pci 0000:02:05.0: reg 10: [io  0xc800-0xc8ff]
[    0.256791] pci 0000:02:05.0: reg 14: [mem 0xfeaffc00-0xfeaffcff]
[    0.256836] pci 0000:02:05.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[    0.256856] pci 0000:02:05.0: supports D1 D2
[    0.256859] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.256864] pci 0000:02:05.0: PME# disabled
[    0.256906] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.256915] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.256919] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.256926] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.256929] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.256932] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.256943] pci_bus 0000:00: on NUMA node 0
[    0.256946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.257081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.262103] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.262163] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.262221] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.262278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.262335] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.262396] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.262453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.262513] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.262621] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.262631] vgaarb: loaded
[    0.262738] PCI: Using ACPI for IRQ routing
[    0.262744] PCI: pci_cache_line_size set to 64 bytes
[    0.262805] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.262808] reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff 
[    0.262929] NetLabel: Initializing
[    0.262934] NetLabel:  domain hash size = 128
[    0.262939] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.262957] NetLabel:  unlabeled traffic allowed by default
[    0.263083] hpet clockevent registered
[    0.263086] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.263095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.263104] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.273341] Switching to clocksource hpet
[    0.276503] Switched to NOHz mode on CPU #0
[    0.276608] Switched to NOHz mode on CPU #1
[    0.280606] pnp: PnP ACPI init
[    0.280639] ACPI: bus type pnp registered
[    0.280765] pnp 00:00: [bus 00-ff]
[    0.280768] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.280771] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.280774] pnp 00:00: [io  0x0d00-0xffff window]
[    0.280777] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.280779] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.280782] pnp 00:00: [mem 0xb8000000-0xffffffff window]
[    0.280857] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.280868] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[    0.280926] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[    0.280935] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.280972] pnp 00:02: [dma 4]
[    0.280974] pnp 00:02: [io  0x0000-0x000f]
[    0.280976] pnp 00:02: [io  0x0081-0x0083]
[    0.280979] pnp 00:02: [io  0x0087]
[    0.280981] pnp 00:02: [io  0x0089-0x008b]
[    0.280983] pnp 00:02: [io  0x008f]
[    0.280985] pnp 00:02: [io  0x00c0-0x00df]
[    0.281017] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.281029] pnp 00:03: [io  0x0070-0x0071]
[    0.281044] pnp 00:03: [irq 8]
[    0.281078] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.281088] pnp 00:04: [io  0x0061]
[    0.281119] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.281129] pnp 00:05: [io  0x00f0-0x00ff]
[    0.281138] pnp 00:05: [irq 13]
[    0.281170] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.281695] pnp 00:06: [io  0x0378-0x037f]
[    0.281698] pnp 00:06: [io  0x0778-0x077f]
[    0.281704] pnp 00:06: [irq 7]
[    0.281706] pnp 00:06: [dma 3]
[    0.281867] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.282209] pnp 00:07: [io  0x0010-0x001f]
[    0.282212] pnp 00:07: [io  0x0022-0x003f]
[    0.282214] pnp 00:07: [io  0x0044-0x005f]
[    0.282216] pnp 00:07: [io  0x0062-0x0063]
[    0.282218] pnp 00:07: [io  0x0065-0x006f]
[    0.282221] pnp 00:07: [io  0x0072-0x007f]
[    0.282223] pnp 00:07: [io  0x0080]
[    0.282225] pnp 00:07: [io  0x0084-0x0086]
[    0.282227] pnp 00:07: [io  0x0088]
[    0.282229] pnp 00:07: [io  0x008c-0x008e]
[    0.282231] pnp 00:07: [io  0x0090-0x009f]
[    0.282234] pnp 00:07: [io  0x00a2-0x00bf]
[    0.282236] pnp 00:07: [io  0x00e0-0x00ef]
[    0.282238] pnp 00:07: [io  0x0200-0x0207]
[    0.282240] pnp 00:07: [mem 0xffb80000-0xfffffffe]
[    0.282243] pnp 00:07: [io  0x04d0-0x04d1]
[    0.282245] pnp 00:07: [io  0x0800-0x087f]
[    0.282248] pnp 00:07: [io  0x0000-0xffffffff disabled]
[    0.282250] pnp 00:07: [io  0x0480-0x04bf]
[    0.282252] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    0.282255] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[    0.282327] system 00:07: [io  0x0200-0x0207] has been reserved
[    0.282335] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.282342] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.282348] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.282355] system 00:07: [mem 0xffb80000-0xfffffffe] has been reserved
[    0.282362] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.282369] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.282376] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282426] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[    0.282429] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[    0.282478] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.282486] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.282493] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282592] pnp 00:09: [io  0x0000-0xffffffff disabled]
[    0.282595] pnp 00:09: [io  0x0290-0x029f]
[    0.282645] system 00:09: [io  0x0290-0x029f] has been reserved
[    0.282653] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.282926] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.282933] pnp 00:0a: [irq 4]
[    0.282935] pnp 00:0a: [dma 0 disabled]
[    0.283014] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.283049] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.283101] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.283110] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283280] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.283283] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.283285] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.283287] pnp 00:0c: [mem 0x00100000-0xb7ffffff]
[    0.283290] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[    0.283363] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.283371] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.283378] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.283385] system 00:0c: [mem 0x00100000-0xb7ffffff] could not be reserved
[    0.283393] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.283533] pnp: PnP ACPI: found 13 devices
[    0.283539] ACPI: ACPI bus type pnp unregistered
[    0.320077] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.320085] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.320094] pci 0000:00:01.0:   bridge window [mem 0xf8900000-0xfe9fffff]
[    0.320102] pci 0000:00:01.0:   bridge window [mem 0xbff00000-0xdfefffff 64bit pref]
[    0.320113] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.320119] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.320128] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.320136] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.320156] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.320165] pci 0000:00:01.0: setting latency timer to 64
[    0.320172] pci 0000:00:1e.0: setting latency timer to 64
[    0.320176] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.320179] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.320182] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.320185] pci_bus 0000:01: resource 1 [mem 0xf8900000-0xfe9fffff]
[    0.320188] pci_bus 0000:01: resource 2 [mem 0xbff00000-0xdfefffff 64bit pref]
[    0.320190] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.320193] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.320196] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.320198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.320249] NET: Registered protocol family 2
[    0.320339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.320589] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.321204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.321460] TCP: Hash tables configured (established 131072 bind 65536)
[    0.321467] TCP reno registered
[    0.321472] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.321486] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.321626] NET: Registered protocol family 1
[    0.321755] pci 0000:01:00.0: Boot video device
[    0.321761] PCI: CLS 32 bytes, default 64
[    0.321819] Unpacking initramfs...
[    0.360738] Freeing initrd memory: 2100k freed
[    0.361879] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    0.361893] apm: disabled - APM is not SMP safe.
[    0.362051] audit: initializing netlink socket (disabled)
[    0.362070] type=2000 audit(1311250462.359:1): initialized
[    0.362491] highmem bounce pool size: 64 pages
[    0.362500] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.364888] VFS: Disk quotas dquot_6.5.2
[    0.364985] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.365118] msgmni has been set to 1691
[    0.365348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.365388] io scheduler noop registered
[    0.365395] io scheduler deadline registered
[    0.365411] io scheduler cfq registered (default)
[    0.365648] vesafb: mode is 1680x1050x32, linelength=6720, pages=1
[    0.365655] vesafb: protected mode interface info at c000:b8a0
[    0.365661] vesafb: pmi: set display start = c00cb903, set palette = c00cb95e
[    0.365667] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    0.365692] vesafb: scrolling: redraw
[    0.365698] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.367469] vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 13781k, total 14336k
[    0.367524] fbcon: VESA VGA (fb0) is primary device
[    0.457454] Console: switching to colour frame buffer device 210x65
[    0.546845] fb0: VESA VGA frame buffer device
[    0.547211] intel_idle: MWAIT substates: 0x20
[    0.547213] intel_idle: does not run on family 6 model 15
[    0.547219] ERST: Table is not found!
[    0.547505] isapnp: Scanning for PnP cards...
[    0.860599] isapnp: No Plug & Play device found
[    0.860995] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.881992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.104217] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.157065] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.159749] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.160162] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.160635] mousedev: PS/2 mouse device common for all mice
[    1.161141] rtc_cmos 00:03: RTC can wake from S4
[    1.183488] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.183989] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.184490] cpuidle: using governor ladder
[    1.184798] cpuidle: using governor menu
[    1.185344] TCP cubic registered
[    1.185589] NET: Registered protocol family 17
[    1.185930] Registering the dns_resolver key type
[    1.186299] Using IPI No-Shortcut mode
[    1.186664] PM: Hibernation image not present or could not be loaded.
[    1.186670] registered taskstats version 1
[    1.187330] rtc_cmos 00:03: setting system clock to 2011-07-21 12:14:24 UTC (1311250464)
[    1.187965] Initializing network drop monitor service
[    1.188418] Freeing unused kernel memory: 512k freed
[    1.189057] Write protecting the kernel text: 3380k
[    1.189447] Write protecting the kernel read-only data: 1028k
[    1.203633] udevd[58]: starting version 171
[    1.313819] usbcore: registered new interface driver usbfs
[    1.314265] usbcore: registered new interface driver hub
[    1.316709] usbcore: registered new device driver usb
[    1.321005] SCSI subsystem initialized
[    1.339277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.339845] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.340446] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.340451] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.340903] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.350029] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.350513] ehci_hcd 0000:00:1d.7: debug port 1
[    1.371656] Refined TSC clocksource calibration: 1994.999 MHz.
[    1.396650] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.396703] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[    1.396890] libata version 3.00 loaded.
[    1.400525] uhci_hcd: USB Universal Host Controller Interface driver
[    1.439329] Switching to clocksource tsc
[    1.473391] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.494823] hub 1-0:1.0: USB hub found
[    1.515854] hub 1-0:1.0: 8 ports detected
[    1.537116] ata_piix 0000:00:1f.1: version 2.13
[    1.537142] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.558354] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.558727] scsi0 : ata_piix
[    1.579683] scsi1 : ata_piix
[    1.620524] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.641356] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.662137] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.683209] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.683214] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.704124] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.740069] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[    1.761070] hub 2-0:1.0: USB hub found
[    1.781729] hub 2-0:1.0: 2 ports detected
[    1.802183] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.823015] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.823019] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.843650] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.873402] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    1.893968] hub 3-0:1.0: USB hub found
[    1.914232] hub 3-0:1.0: 2 ports detected
[    1.934349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.954658] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.954662] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.974842] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.003399] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
[    2.023936] hub 4-0:1.0: USB hub found
[    2.044151] hub 4-0:1.0: 2 ports detected
[    2.064218] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.084555] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.084559] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.104566] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.126696] usb 1-8: new high speed USB device number 5 using ehci_hcd
[    2.150060] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    2.170865] hub 5-0:1.0: USB hub found
[    2.191158] hub 5-0:1.0: 2 ports detected
[    2.211638] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.232226] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    2.252631] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.253172] scsi2 : ata_piix
[    2.273703] scsi3 : ata_piix
[    2.294005] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[    2.314638] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[    2.443374] usb 2-2: new full speed USB device number 2 using uhci_hcd
[    2.500608] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[    2.521236] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.541891] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    2.562245] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.582820] ata3.01: ATA-7: ST3400620AS, 3.AAK, max UDMA/133
[    2.603389] ata3.01: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.624347] ata4.01: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
[    2.645115] ata4.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.670590] ata3.00: configured for UDMA/133
[    2.724543] ata4.00: configured for UDMA/133
[    2.745412] ata3.01: configured for UDMA/133
[    2.765847] scsi 2:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    2.786536] scsi 2:0:1:0: Direct-Access     ATA      ST3400620AS      3.AA PQ: 0 ANSI: 5
[    2.806918] usb 3-1: new low speed USB device number 2 using uhci_hcd
[    2.827609] ata4.01: configured for UDMA/133
[    2.848073] scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    2.868882] scsi 3:0:1:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.905878] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.926630] sd 2:0:1:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    2.926801] sd 2:0:0:0: [sda] Write Protect is off
[    2.926804] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.926824] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.927151] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.927201] sd 3:0:0:0: [sdc] Write Protect is off
[    2.927204] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.927226] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.050304] sd 3:0:1:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.050397]  sda: sda1 sda2 sda4
[    3.091797]  sdc: sdc1
[    3.093290] sd 2:0:1:0: [sdb] Write Protect is off
[    3.093294] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    3.093314] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.093804] sd 3:0:1:0: [sdd] Write Protect is off
[    3.093807] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    3.093827] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.101521]  sdd: sdd1
[    3.217136]  sdb: sdb1 sdb2
[    3.238178] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.239778] sd 3:0:0:0: [sdc] Attached SCSI disk
[    3.281104] sd 3:0:1:0: [sdd] Attached SCSI disk
[    3.302269] sd 2:0:1:0: [sdb] Attached SCSI disk
[    3.470226] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0
[    3.491373] generic-usb 0003:04D9:1602.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-1/input0
[    3.512851] usb 3-2: new low speed USB device number 3 using uhci_hcd
[    3.599082] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1
[    3.621510] generic-usb 0003:04D9:1602.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-1/input1
[    3.644415] usbcore: registered new interface driver usbhid
[    3.667193] usbhid: USB HID core driver
[    3.767507] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
[    3.791429] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
[    4.215010] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.126175] udevd[259]: starting version 171
[    6.312901] Linux agpgart interface v0.103
[    6.364145] leds_ss4200: no LED devices found
[    6.376928] intel_rng: FWH not detected
[    6.433767] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    6.442672] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.442704] r8169 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.442730] r8169 0000:02:05.0: (unregistered net_device): no PCI Express capability
[    6.443017] r8169 0000:02:05.0: eth0: RTL8169sc/8110sc at 0xf9486c00, 00:50:8d:cb:42:29, XID 18000000 IRQ 21
[    6.447516] parport_pc 00:06: reported by Plug and Play ACPI
[    6.447626] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    6.513063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    6.513126] ACPI: Power Button [PWRB]
[    6.513191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.513448] ACPI: Power Button [PWRF]
[    6.523265] ACPI: acpi_idle registered with cpuidle
[    6.614786] iTCO_vendor_support: vendor-support=0
[    6.640285] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    6.640393] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[    6.640459] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.662663] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.670255] [Firmware Bug]: Invalid critical threshold (103)
[    6.670260] [Firmware Bug]: No valid trip found
[    6.809959] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    6.810856] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    6.810914] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    6.810962] sd 3:0:1:0: Attached scsi generic sg3 type 0
[    6.865172] ppdev: user-space parallel port driver
[    6.895192] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.895518] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[    6.895546] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.972861] hda_codec: ALC883: BIOS auto-probing.
[    6.977985] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.005009] Linux media interface: v0.10
[    7.008063] nvidia: module license 'NVIDIA' taints kernel.
[    7.008067] Disabling lock debugging due to kernel taint
[    7.009089] usbcore: registered new interface driver uas
[    7.061173] Initializing USB Mass Storage driver...
[    7.061345] scsi4 : usb-storage 1-8:1.0
[    7.061604] usbcore: registered new interface driver usb-storage
[    7.061607] USB Mass Storage support registered.
[    7.259767] Linux video capture interface: v2.00
[    7.339302] gspca: v2.12.0 registered
[    7.356628] gspca: probing 045e:00f7
[    7.363134] sonixj: Sonix chip id: 11
[    7.365234] input: sonixj as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/input/input7
[    7.365462] gspca: video0 created
[    7.365614] usbcore: registered new interface driver sonixj
[    7.780206] usbcore: registered new interface driver snd-usb-audio
[    8.060643] scsi 4:0:0:0: Direct-Access              Patriot Memory   PMAP PQ: 0 ANSI: 0 CCS
[    8.060853] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    8.062250] sd 4:0:0:0: [sde] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    8.062742] sd 4:0:0:0: [sde] Write Protect is off
[    8.062746] sd 4:0:0:0: [sde] Mode Sense: 23 00 00 00
[    8.062748] sd 4:0:0:0: [sde] Assuming drive cache: write through
[    8.064738] sd 4:0:0:0: [sde] Assuming drive cache: write through
[    8.065402]  sde: sde1
[    8.066869] sd 4:0:0:0: [sde] Assuming drive cache: write through
[    8.066873] sd 4:0:0:0: [sde] Attached SCSI removable disk
[    8.147572] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.147583] nvidia 0000:01:00.0: setting latency timer to 64
[    8.147589] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.147747] NVRM: loading NVIDIA UNIX x86 Kernel Module  275.19  Tue Jul 12 18:29:18 PDT 2011
[    8.528924] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.687146] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    8.812391] fuse init (API version 7.16)

p.s.: sorry for my English

Arch Linux

#326 2011-07-13 23:12:14

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#327 2011-07-14 00:54:23

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#328 2011-07-15 00:05:58

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#329 2011-07-15 01:04:34

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#330 2011-07-15 01:38:34

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#331 2011-07-15 08:42:15

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#332 2011-07-15 09:20:56

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#333 2011-07-15 12:25:42

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#334 2011-07-15 19:53:03

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#335 2011-07-16 13:10:01

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#336 2011-07-17 15:19:12

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#337 2011-07-17 16:10:06

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#338 2011-07-17 16:16:33

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#339 2011-07-17 17:09:08

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#340 2011-07-17 18:43:44

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#341 2011-07-19 20:42:48

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#342 2011-07-20 01:54:31

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#343 2011-07-20 04:25:26

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#344 2011-07-20 08:35:02

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#345 2011-07-20 15:35:05

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#346 2011-07-20 23:13:02

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#347 2011-07-21 06:52:51

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#348 2011-07-21 08:28:29

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#349 2011-07-21 08:58:18

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

#350 2011-07-21 10:03:10

Re: unofficial linux-ck repo with cpu optimized packages is ONLINE

Board footer