You are not logged in.
- Topics: Active | Unanswered
#1 2011-07-28 22:29:48
- M Costa
- Member
- Registered: 2011-07-28
- Posts: 2
[SOLVED]Gnome 3 is in fallback mode, Intel G33, and graphics "Unknown"
Hello
I have a question about Gnome 3 starting in Fallback mode.
I just upgraded all of the packages the other day. In the first startup, Gnome said it couldn't start because of a graphics controller/driver problem, and now it stays in fallback mode.
My graphics adaptor is an Intel G33 chipset. The package xf86_video_intel is installed.
Also the system info says the graphics driver is "Unknown." It should know this right?
I looked around, did a few searches, found a few similar issues but none that I could apply to this issue.
Here is the contents of my Xorg.0.log file:
[ 24.907]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 24.907] X Protocol Version 11, Revision 0
[ 24.907] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 24.907] Current Operating System: Linux rockstar 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 24.907] Kernel command line: root=/dev/sda2 ro
[ 24.907] Build Date: 09 July 2011 07:52:32AM
[ 24.907]
[ 24.907] Current version of pixman: 0.22.2
[ 24.907] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.907] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.907] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 28 15:31:20 2011
[ 24.942] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.966] (==) No Layout section. Using the first Screen section.
[ 24.967] (**) |-->Screen "Screen0" (0)
[ 24.967] (**) | |-->Monitor "Monitor0"
[ 24.967] (**) | |-->Device "Device0"
[ 24.967] (==) Automatically adding devices
[ 24.967] (==) Automatically enabling devices
[ 24.996] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.996] Entry deleted from font path.
[ 25.068] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 25.068] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.068] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.068] (II) Loader magic: 0x7d3440
[ 25.068] (II) Module ABI versions:
[ 25.068] X.Org ANSI C Emulation: 0.4
[ 25.068] X.Org Video Driver: 10.0
[ 25.068] X.Org XInput driver : 12.2
[ 25.068] X.Org Server Extension : 5.0
[ 25.069] (--) PCI:*(0:0:2:0) 8086:29c2:8086:5044 rev 2, Mem @ 0x90300000/524288, 0x80000000/268435456, 0x90200000/1048576, I/O @ 0x00002430/8
[ 25.069] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 25.069] (II) LoadModule: "extmod"
[ 25.072] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.106] (II) Module extmod: vendor="X.Org Foundation"
[ 25.106] compiled for 1.10.3, module version = 1.0.0
[ 25.106] Module class: X.Org Server Extension
[ 25.106] ABI class: X.Org Server Extension, version 5.0
[ 25.106] (II) Loading extension MIT-SCREEN-SAVER
[ 25.106] (II) Loading extension XFree86-VidModeExtension
[ 25.106] (II) Loading extension XFree86-DGA
[ 25.106] (II) Loading extension DPMS
[ 25.106] (II) Loading extension XVideo
[ 25.106] (II) Loading extension XVideo-MotionCompensation
[ 25.106] (II) Loading extension X-Resource
[ 25.106] (II) LoadModule: "dbe"
[ 25.106] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.110] (II) Module dbe: vendor="X.Org Foundation"
[ 25.110] compiled for 1.10.3, module version = 1.0.0
[ 25.110] Module class: X.Org Server Extension
[ 25.110] ABI class: X.Org Server Extension, version 5.0
[ 25.110] (II) Loading extension DOUBLE-BUFFER
[ 25.110] (II) LoadModule: "glx"
[ 25.120] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.139] (II) Module glx: vendor="X.Org Foundation"
[ 25.139] compiled for 1.10.3, module version = 1.0.0
[ 25.139] ABI class: X.Org Server Extension, version 5.0
[ 25.139] (==) AIGLX enabled
[ 25.139] (II) Loading extension GLX
[ 25.140] (II) LoadModule: "record"
[ 25.140] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.145] (II) Module record: vendor="X.Org Foundation"
[ 25.145] compiled for 1.10.3, module version = 1.13.0
[ 25.145] Module class: X.Org Server Extension
[ 25.145] ABI class: X.Org Server Extension, version 5.0
[ 25.145] (II) Loading extension RECORD
[ 25.145] (II) LoadModule: "dri"
[ 25.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.156] (II) Module dri: vendor="X.Org Foundation"
[ 25.156] compiled for 1.10.3, module version = 1.0.0
[ 25.156] ABI class: X.Org Server Extension, version 5.0
[ 25.156] (II) Loading extension XFree86-DRI
[ 25.156] (II) LoadModule: "dri2"
[ 25.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.165] (II) Module dri2: vendor="X.Org Foundation"
[ 25.165] compiled for 1.10.3, module version = 1.2.0
[ 25.165] ABI class: X.Org Server Extension, version 5.0
[ 25.165] (II) Loading extension DRI2
[ 25.165] (II) LoadModule: "intel"
[ 25.199] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.226] (II) Module intel: vendor="X.Org Foundation"
[ 25.226] compiled for 1.10.2, module version = 2.15.0
[ 25.226] Module class: X.Org Video Driver
[ 25.226] ABI class: X.Org Video Driver, version 10.0
[ 25.226] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 25.227] (++) using VT number 7
[ 25.230] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.230] drmOpenDevice: node name is /dev/dri/card0
[ 25.230] drmOpenDevice: open result is 8, (OK)
[ 25.230] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 25.230] drmOpenDevice: node name is /dev/dri/card0
[ 25.230] drmOpenDevice: open result is 8, (OK)
[ 25.230] drmOpenByBusid: drmOpenMinor returns 8
[ 25.230] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 25.230] (**) intel(0): Depth 16, (--) framebuffer bpp 16
[ 25.230] (==) intel(0): RGB weight 565
[ 25.230] (==) intel(0): Default visual is TrueColor
[ 25.231] (II) intel(0): Integrated Graphics Chipset: Intel(R) G33
[ 25.231] (--) intel(0): Chipset: "G33"
[ 25.231] (**) intel(0): Relaxed fencing enabled
[ 25.231] (**) intel(0): Framebuffer tiled
[ 25.231] (**) intel(0): Pixmaps tiled
[ 25.231] (**) intel(0): 3D buffers tiled
[ 25.231] (**) intel(0): SwapBuffers wait enabled
[ 25.231] (==) intel(0): video overlay key set to 0x83e
[ 25.287] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 25.344] (II) intel(0): EDID for output VGA1
[ 25.344] (II) intel(0): Manufacturer: SAM Model: 22 Serial#: 1095643447
[ 25.344] (II) intel(0): Year: 2003 Week: 29
[ 25.344] (II) intel(0): EDID Version: 1.3
[ 25.344] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 25.344] (II) intel(0): Sync: Separate
[ 25.344] (II) intel(0): Max Image Size [cm]: horiz.: 32 vert.: 24
[ 25.344] (II) intel(0): Gamma: 1.82
[ 25.344] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 25.344] (II) intel(0): First detailed timing is preferred mode
[ 25.344] (II) intel(0): redX: 0.639 redY: 0.323 greenX: 0.275 greenY: 0.597
[ 25.344] (II) intel(0): blueX: 0.143 blueY: 0.062 whiteX: 0.283 whiteY: 0.298
[ 25.344] (II) intel(0): Supported established timings:
[ 25.344] (II) intel(0): 720x400@70Hz
[ 25.344] (II) intel(0): 640x480@60Hz
[ 25.344] (II) intel(0): 640x480@75Hz
[ 25.344] (II) intel(0): Manufacturer's mask: 0
[ 25.344] (II) intel(0): Supported standard timings:
[ 25.344] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
[ 25.344] (II) intel(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 25.344] (II) intel(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 25.344] (II) intel(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 25.344] (II) intel(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.344] (II) intel(0): Supported detailed timing:
[ 25.344] (II) intel(0): clock: 94.5 MHz Image Size: 312 x 234 mm
[ 25.344] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
[ 25.344] (II) intel(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
[ 25.344] (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[ 25.344] (II) intel(0): Monitor name: SyncMaster
[ 25.345] (II) intel(0): Serial No: HDBW717841
[ 25.345] (II) intel(0): EDID (in hex):
[ 25.345] (II) intel(0): 00ffffffffffff004c2d220037314e41
[ 25.345] (II) intel(0): 1d0d0103682018522abbb9a352469824
[ 25.345] (II) intel(0): 0f484ca4000031403159455961598180
[ 25.345] (II) intel(0): 010101010101ea240060410028303060
[ 25.345] (II) intel(0): 130038ea1000001e000000fd0032a01e
[ 25.345] (II) intel(0): 470b000a202020202020000000fc0053
[ 25.345] (II) intel(0): 796e634d61737465720a2020000000ff
[ 25.345] (II) intel(0): 00484442573731373834310a20200022
[ 25.345] (II) intel(0): EDID vendor "SAM", prod id 34
[ 25.345] (II) intel(0): Using EDID range info for horizontal sync
[ 25.345] (II) intel(0): Using EDID range info for vertical refresh
[ 25.345] (II) intel(0): Printing DDC gathered Modelines:
[ 25.345] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.345] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 25.345] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 25.345] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 25.345] (II) intel(0): Printing probed modes for output VGA1
[ 25.345] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 25.345] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 25.345] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.345] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 25.345] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 25.345] (II) intel(0): Output VGA1 connected
[ 25.345] (II) intel(0): Using exact sizes for initial modes
[ 25.345] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 25.345] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.345] (II) intel(0): Kernel page flipping support detected, enabling
[ 25.345] (**) intel(0): Display dimensions: (320, 240) mm
[ 25.345] (**) intel(0): DPI set to (81, 81)
[ 25.345] (II) Loading sub module "fb"
[ 25.345] (II) LoadModule: "fb"
[ 25.345] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.347] (II) Module fb: vendor="X.Org Foundation"
[ 25.347] compiled for 1.10.3, module version = 1.0.0
[ 25.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.347] (II) Loading sub module "dri2"
[ 25.347] (II) LoadModule: "dri2"
[ 25.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.347] (II) Module dri2: vendor="X.Org Foundation"
[ 25.347] compiled for 1.10.3, module version = 1.2.0
[ 25.347] ABI class: X.Org Server Extension, version 5.0
[ 25.347] (II) intel(0): [DRI2] Setup complete
[ 25.347] (II) intel(0): [DRI2] DRI driver: i915
[ 25.347] (II) intel(0): Allocated new frame buffer 1024x768 stride 2048, tiled
[ 25.364] (II) UXA(0): Driver registered support for the following operations:
[ 25.364] (II) solid
[ 25.364] (II) copy
[ 25.364] (II) composite (RENDER acceleration)
[ 25.364] (II) put_image
[ 25.364] (II) get_image
[ 25.364] (==) intel(0): Backing store disabled
[ 25.364] (==) intel(0): Silken mouse enabled
[ 25.365] (II) intel(0): Initializing HW Cursor
[ 25.393] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.393] (==) intel(0): DPMS enabled
[ 25.393] (==) intel(0): Intel XvMC decoder disabled
[ 25.393] (II) intel(0): Set up textured video
[ 25.393] (II) intel(0): Set up overlay video
[ 25.393] (II) intel(0): direct rendering: DRI2 Enabled
[ 25.393] (==) intel(0): hotplug detection: "enabled"
[ 25.393] (--) RandR disabled
[ 25.393] (II) Initializing built-in extension Generic Event Extension
[ 25.393] (II) Initializing built-in extension SHAPE
[ 25.393] (II) Initializing built-in extension MIT-SHM
[ 25.393] (II) Initializing built-in extension XInputExtension
[ 25.393] (II) Initializing built-in extension XTEST
[ 25.393] (II) Initializing built-in extension BIG-REQUESTS
[ 25.393] (II) Initializing built-in extension SYNC
[ 25.393] (II) Initializing built-in extension XKEYBOARD
[ 25.393] (II) Initializing built-in extension XC-MISC
[ 25.393] (II) Initializing built-in extension SECURITY
[ 25.393] (II) Initializing built-in extension XINERAMA
[ 25.393] (II) Initializing built-in extension XFIXES
[ 25.393] (II) Initializing built-in extension RENDER
[ 25.393] (II) Initializing built-in extension RANDR
[ 25.393] (II) Initializing built-in extension COMPOSITE
[ 25.393] (II) Initializing built-in extension DAMAGE
[ 25.492] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.492] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.492] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 25.492] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 25.492] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.492] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 25.492] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.492] (II) intel(0): Setting screen physical size to 270 x 203
[ 25.977] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.977] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.977] (II) LoadModule: "evdev"
[ 25.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.999] (II) Module evdev: vendor="X.Org Foundation"
[ 25.999] compiled for 1.10.0, module version = 2.6.0
[ 25.999] Module class: X.Org XInput Driver
[ 25.999] ABI class: X.Org XInput driver, version 12.2
[ 25.999] (II) Using input driver 'evdev' for 'Power Button'
[ 25.999] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.999] (**) Power Button: always reports core events
[ 26.000] (**) Power Button: Device: "/dev/input/event3"
[ 26.013] (--) Power Button: Found keys
[ 26.013] (II) Power Button: Configuring as keyboard
[ 26.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 26.013] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 26.013] (**) Option "xkb_rules" "evdev"
[ 26.013] (**) Option "xkb_model" "evdev"
[ 26.013] (**) Option "xkb_layout" "us"
[ 26.038] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 26.038] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.038] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.038] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.038] (**) Sleep Button: always reports core events
[ 26.038] (**) Sleep Button: Device: "/dev/input/event2"
[ 26.056] (--) Sleep Button: Found keys
[ 26.056] (II) Sleep Button: Configuring as keyboard
[ 26.056] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 26.056] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 26.056] (**) Option "xkb_rules" "evdev"
[ 26.056] (**) Option "xkb_model" "evdev"
[ 26.056] (**) Option "xkb_layout" "us"
[ 26.058] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event1)
[ 26.058] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 26.058] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 26.058] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.058] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 26.058] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 26.073] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 26.073] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 26.073] (--) PIXART USB OPTICAL MOUSE: Found relative axes
[ 26.073] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 26.073] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 26.073] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 26.073] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 26.073] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.073] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input1/event1"
[ 26.073] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
[ 26.073] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 26.073] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 26.073] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 26.073] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 26.073] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 26.073] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 26.073] (II) No input driver/identifier specified (ignoring)
[ 26.074] (II) config/udev: Adding input device STV06xx (/dev/input/event6)
[ 26.074] (**) STV06xx: Applying InputClass "evdev keyboard catchall"
[ 26.074] (II) Using input driver 'evdev' for 'STV06xx'
[ 26.074] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.074] (**) STV06xx: always reports core events
[ 26.074] (**) STV06xx: Device: "/dev/input/event6"
[ 26.093] (--) STV06xx: Found keys
[ 26.093] (II) STV06xx: Configuring as keyboard
[ 26.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/input/input6/event6"
[ 26.093] (II) XINPUT: Adding extended input device "STV06xx" (type: KEYBOARD)
[ 26.093] (**) Option "xkb_rules" "evdev"
[ 26.093] (**) Option "xkb_model" "evdev"
[ 26.093] (**) Option "xkb_layout" "us"
[ 26.094] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 26.094] (II) No input driver/identifier specified (ignoring)
[ 26.101] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.101] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.101] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.101] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.101] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.101] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.120] (--) AT Translated Set 2 keyboard: Found keys
[ 26.120] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.120] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 26.120] (**) Option "xkb_rules" "evdev"
[ 26.120] (**) Option "xkb_model" "evdev"
[ 26.120] (**) Option "xkb_layout" "us"
[ 26.120] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 26.120] (II) No input driver/identifier specified (ignoring)
[ 26.207] (II) intel(0): EDID vendor "SAM", prod id 34
[ 26.207] (II) intel(0): Using hsync ranges from config file
[ 26.207] (II) intel(0): Using vrefresh ranges from config file
[ 26.208] (II) intel(0): Printing DDC gathered Modelines:
[ 26.208] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 26.208] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 26.208] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 26.208] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 26.208] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 26.208] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 26.208] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.777] (II) intel(0): EDID vendor "SAM", prod id 34
[ 28.778] (II) intel(0): Using hsync ranges from config file
[ 28.778] (II) intel(0): Using vrefresh ranges from config file
[ 28.778] (II) intel(0): Printing DDC gathered Modelines:
[ 28.778] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 28.778] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 28.778] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.778] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.778] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 28.778] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 28.778] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.834] (II) intel(0): EDID vendor "SAM", prod id 34
[ 28.834] (II) intel(0): Using hsync ranges from config file
[ 28.834] (II) intel(0): Using vrefresh ranges from config file
[ 28.834] (II) intel(0): Printing DDC gathered Modelines:
[ 28.834] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 28.834] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 28.834] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.834] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.834] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 28.834] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 28.834] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 28.977] (II) intel(0): EDID vendor "SAM", prod id 34
[ 28.978] (II) intel(0): Using hsync ranges from config file
[ 28.978] (II) intel(0): Using vrefresh ranges from config file
[ 28.978] (II) intel(0): Printing DDC gathered Modelines:
[ 28.978] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 28.978] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 28.978] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 28.978] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 28.978] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 28.978] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 28.978] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 29.034] (II) intel(0): EDID vendor "SAM", prod id 34
[ 29.034] (II) intel(0): Using hsync ranges from config file
[ 29.034] (II) intel(0): Using vrefresh ranges from config file
[ 29.034] (II) intel(0): Printing DDC gathered Modelines:
[ 29.034] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 29.034] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 29.034] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.034] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 29.034] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 29.034] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 29.034] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 45.159] (II) intel(0): EDID vendor "SAM", prod id 34
[ 45.159] (II) intel(0): Using hsync ranges from config file
[ 45.159] (II) intel(0): Using vrefresh ranges from config file
[ 45.159] (II) intel(0): Printing DDC gathered Modelines:
[ 45.159] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 45.159] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 45.159] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45.159] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 45.159] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 45.159] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 45.159] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 45.227] (II) intel(0): EDID vendor "SAM", prod id 34
[ 45.228] (II) intel(0): Using hsync ranges from config file
[ 45.228] (II) intel(0): Using vrefresh ranges from config file
[ 45.228] (II) intel(0): Printing DDC gathered Modelines:
[ 45.228] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 45.228] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 45.228] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45.228] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 45.228] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 45.228] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 45.228] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 45.284] (II) intel(0): EDID vendor "SAM", prod id 34
[ 45.284] (II) intel(0): Using hsync ranges from config file
[ 45.284] (II) intel(0): Using vrefresh ranges from config file
[ 45.284] (II) intel(0): Printing DDC gathered Modelines:
[ 45.284] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 45.284] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 45.284] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45.284] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 45.284] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 45.284] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 45.284] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 45.348] (II) intel(0): EDID vendor "SAM", prod id 34
[ 45.348] (II) intel(0): Using hsync ranges from config file
[ 45.348] (II) intel(0): Using vrefresh ranges from config file
[ 45.348] (II) intel(0): Printing DDC gathered Modelines:
[ 45.348] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 45.348] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 45.348] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 45.348] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 45.348] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 45.348] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 45.348] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 46.864] (II) intel(0): EDID vendor "SAM", prod id 34
[ 46.864] (II) intel(0): Using hsync ranges from config file
[ 46.864] (II) intel(0): Using vrefresh ranges from config file
[ 46.864] (II) intel(0): Printing DDC gathered Modelines:
[ 46.864] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 46.864] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 46.864] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 46.864] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 46.864] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 46.864] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 46.864] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 638.328] (II) intel(0): EDID vendor "SAM", prod id 34
[ 638.328] (II) intel(0): Using hsync ranges from config file
[ 638.328] (II) intel(0): Using vrefresh ranges from config file
[ 638.328] (II) intel(0): Printing DDC gathered Modelines:
[ 638.328] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 638.328] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 638.328] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 638.328] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 638.328] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 638.328] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 638.328] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 638.384] (II) intel(0): EDID vendor "SAM", prod id 34
[ 638.384] (II) intel(0): Using hsync ranges from config file
[ 638.384] (II) intel(0): Using vrefresh ranges from config file
[ 638.384] (II) intel(0): Printing DDC gathered Modelines:
[ 638.384] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 638.384] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 638.384] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 638.384] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 638.384] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 638.384] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 638.384] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 638.807] (II) intel(0): EDID vendor "SAM", prod id 34
[ 638.808] (II) intel(0): Using hsync ranges from config file
[ 638.808] (II) intel(0): Using vrefresh ranges from config file
[ 638.808] (II) intel(0): Printing DDC gathered Modelines:
[ 638.808] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 638.808] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 638.808] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 638.808] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 638.808] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 638.808] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 638.808] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 639.008] (II) intel(0): EDID vendor "SAM", prod id 34
[ 639.008] (II) intel(0): Using hsync ranges from config file
[ 639.008] (II) intel(0): Using vrefresh ranges from config file
[ 639.008] (II) intel(0): Printing DDC gathered Modelines:
[ 639.008] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 639.008] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 639.008] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 639.008] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 639.008] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 639.008] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 639.008] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 639.714] (II) intel(0): EDID vendor "SAM", prod id 34
[ 639.714] (II) intel(0): Using hsync ranges from config file
[ 639.715] (II) intel(0): Using vrefresh ranges from config file
[ 639.715] (II) intel(0): Printing DDC gathered Modelines:
[ 639.715] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 639.715] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 639.715] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 639.715] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 639.715] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 639.715] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 639.715] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 640.491] (II) intel(0): EDID vendor "SAM", prod id 34
[ 640.491] (II) intel(0): Using hsync ranges from config file
[ 640.491] (II) intel(0): Using vrefresh ranges from config file
[ 640.491] (II) intel(0): Printing DDC gathered Modelines:
[ 640.491] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 640.491] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 640.491] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 640.491] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 640.491] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 640.491] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 640.491] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2977.387] (II) intel(0): EDID vendor "SAM", prod id 34
[ 2977.387] (II) intel(0): Using hsync ranges from config file
[ 2977.387] (II) intel(0): Using vrefresh ranges from config file
[ 2977.387] (II) intel(0): Printing DDC gathered Modelines:
[ 2977.387] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 2977.387] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 2977.387] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2977.387] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 2977.387] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 2977.387] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 2977.387] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 3578.667] (II) intel(0): EDID vendor "SAM", prod id 34
[ 3578.667] (II) intel(0): Using hsync ranges from config file
[ 3578.667] (II) intel(0): Using vrefresh ranges from config file
[ 3578.667] (II) intel(0): Printing DDC gathered Modelines:
[ 3578.667] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 3578.667] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 3578.667] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 3578.667] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 3578.667] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 3578.667] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 3578.667] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 8329.083] (II) intel(0): EDID vendor "SAM", prod id 34
[ 8329.083] (II) intel(0): Using hsync ranges from config file
[ 8329.083] (II) intel(0): Using vrefresh ranges from config file
[ 8329.083] (II) intel(0): Printing DDC gathered Modelines:
[ 8329.083] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 8329.083] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 8329.083] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 8329.083] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 8329.083] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 8329.083] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 8329.084] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)I already tried looking for any lines that say (EE)...
Also... what exactly am I missing in "fallback" mode? Is it just less pretty and flashy or are there major features missing?
Any guidance is appreciated!
- Matt
Last edited by M Costa (2011-07-29 00:20:07)
Offline
#2 2011-07-28 23:09:38
- Radioactiveman
- Member
- From: Germany
- Registered: 2010-05-13
- Posts: 388
Re: [SOLVED]Gnome 3 is in fallback mode, Intel G33, and graphics "Unknown"
Try installing mesa-demos
Offline
#3 2011-07-29 00:25:13
- M Costa
- Member
- Registered: 2011-07-28
- Posts: 2
Re: [SOLVED]Gnome 3 is in fallback mode, Intel G33, and graphics "Unknown"
Thanks Radioactive, that did the trick.
- Matt
Offline