You are not logged in.

#1501 2011-08-03 01:40:01

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: Post your handy self made command line utilities

hauzer wrote:

Say you have a directory tree of your favorite songs and albums, this little function will make a recursive list of all files, match them against the argument you've passed and play the matched one. If multiple matches are found, it will play a random one.

# Mplayer Find Play
mpfp () {
  MUSICDIR="${HOME}"/music/
  ISGLOBSTAR='no'

  shopt -p | grep '-s globstar' > /dev/null
  if [[ $? -eq 0 ]] ; then ISGLOBSTAR='yes' ; fi

  shopt -s globstar
  pushd "${MUSICDIR}" > /dev/null
  mplayer "$((((stat ** -c '%n' | egrep '*.*' ) | grep "$1") | sort -R) | tail -n1)"
  popd > /dev/null
  if [[ "${ISGLOBSTAR}" == 'no' ]] ; then shopt -u globstar ; fi
}

What the heck is the point of the stat call? globstar is notoriously slow compared to find on large hierarchies as it has to expand in place rather than iterate...

mpfp() {
  local musicdir=/path/to/music
  find "$musicdir" -type f -name "*$1*" -print0 | shuf -zn1 | xargs -0 mplayer
}

Last edited by falconindy (2011-08-03 01:43:13)

Offline

#1502 2011-08-03 01:40:53

Procyon
Member
Registered: 2008-05-07
Posts: 1,819

Re: Post your handy self made command line utilities

@hauzer:
If you run that in a subshell you won't need to restore shopt or pushd.

E.g.
mpfp() {
(
   shopt -s globstar
   cd $MUSICDIR
   mplayer ...
)
}

I use something very similar actually:

ms () 
{ 
    xargs -0 -a <(locate -0 /2/music/"*$1*" | grep -aizZ "$2" | grep -aizZ "$3") mplayer
}

The problem I have is that I want to do an "ANDed" grep search.

The above code allows for an extra two arguments which must match the filename.
They can be blank though.

So
ms foo bar
would match
barfoo.mp3

Offline

#1503 2011-08-03 01:47:25

Procyon
Member
Registered: 2008-05-07
Posts: 1,819

Re: Post your handy self made command line utilities

@falconindy:

If you pipe to xargs like that, it won't give mplayer a stdin so you won't be able to control it.

You need to use xargs -a and let its stdin be a tty (which it will then give to mplayer)

Offline

#1504 2011-08-03 01:52:10

hauzer
Member
From: Belgrade, Serbia
Registered: 2010-11-17
Posts: 279
Website

Re: Post your handy self made command line utilities

I thought of using find but I guess it's just a matter of choice. Of course, it's always better to use utilities that are meant for a specified job, but excercising my poor bash skills one way or another can't hurt. wink I'll thinker around this for a while. Oh, and thanks for the subshell tip, Procyon.


Vanity of vanities, saith the Preacher, vanity of vanities; all is vanity.
What profit hath a man of all his labour which he taketh under the sun?
All the rivers run into the sea; yet the sea is not full; unto the place from whence the rivers come, thither they return again.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow.

Offline

#1505 2011-08-03 02:10:41

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: Post your handy self made command line utilities

Procyon wrote:

@falconindy:

If you pipe to xargs like that, it won't give mplayer a stdin so you won't be able to control it.

You need to use xargs -a and let its stdin be a tty (which it will then give to mplayer)

Sure, alternatively you could just read the result of the find|shuf and pass it to mplayer.

Offline

#1506 2011-08-04 02:47:55

Pooh-Bah
Member
Registered: 2011-07-13
Posts: 47

Re: Post your handy self made command line utilities

# mkdir /etc/cron.hourly
# ln -s ~/pmsync.sh /etc/cron.hourly/

~/pmsync.sh:

#!/bin/bash
pacman -Sy

Offline

#1507 2011-08-04 02:57:57

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: Post your handy self made command line utilities

Pooh-Bah wrote:

# mkdir /etc/cron.hourly
# ln -s ~/pmsync.sh /etc/cron.hourly/

~/pmsync.sh:

#!/bin/bash
pacman -Sy

And?

Do you run it to know how many packages you can update?
http://bashlnx.blogspot.com/2011/05/hey … rt-ii.html

Offline

#1508 2011-08-04 14:24:30

Pooh-Bah
Member
Registered: 2011-07-13
Posts: 47

Re: Post your handy self made command line utilities

karol wrote:

Do you run it to know how many packages you can update?
http://bashlnx.blogspot.com/2011/05/hey … rt-ii.html

Yep.
Thanks. Now my ~/pmsync.sh looks like:

#!/bin/bash
mkdir --parents /dev/shm/$USER/pacman/sync
ln --force --symbolic /var/lib/pacman/local /dev/shm/$USER/pacman
fakeroot /usr/bin/pacman --dbpath /dev/shm/$USER/pacman --sync --refresh

Last edited by Pooh-Bah (2011-08-05 06:16:32)

Offline

#1509 2011-08-05 06:16:49

Pooh-Bah
Member
Registered: 2011-07-13
Posts: 47

Re: Post your handy self made command line utilities

Small update.

~/pmsync.sh

#!/bin/bash

mkdir --parents /dev/shm/$USER/pacman/sync

ln --force --symbolic /var/lib/pacman/local /dev/shm/$USER/pacman

fakeroot /usr/bin/pacman --sync --dbpath /dev/shm/$USER/pacman --refresh

PKG=$(/usr/bin/pacman --query --dbpath /dev/shm/$USER/pacman --quiet --upgrades | wc -l)
if [[ $PKG = 0 ]]; then
    echo "is up to date" > /dev/shm/$USER/pacman/PKG
elif [[ $PKG = 1 ]]; then
    echo "1 new package" > /dev/shm/$USER/pacman/PKG
else
    echo "$PKG new packages" > /dev/shm/$USER/pacman/PKG
fi

~/.tmux.conf:

...
set -g status-left '... #[fg=black](#[default]#[fg=magenta,nobright]#(cat /dev/shm/$USER/pacman/PKG)#[default]#[fg=black])#[default]'

screenshot:
57432279.th.png
(all colors & configs by Jason W. Ryan (thank you), with small fixes.)

Offline

#1510 2011-08-07 12:45:24

atm
Member
From: Mumbai
Registered: 2011-04-03
Posts: 37

Re: Post your handy self made command line utilities

One of the first bash scripts I created was to pull all my git projects stored in one directory. Very simple.

for x in /home/atm/git/*;
do
        echo "Entering $x"
        cd $x;
        git pull;
        cd ..;
done

Offline

#1511 2011-08-10 18:09:06

dodo3773
Member
Registered: 2011-03-17
Posts: 818

Re: Post your handy self made command line utilities

I wrote a script that will show me the domain name servers of ip addresses that are currently connected to me. First it shows the short option from dig then the long one.

#! /bin/bash
c=$( netstat --tcp --numeric | awk 'NR>2 {print $5}'| sort -n -t : -k 2,2 | uniq | wc -l)
d=$( echo $c )
if [ "$d" -lt "23" ] && [ "$d" -gt "0" ]; then

echo "Domains / Nameservers"

x=$( netstat --tcp --numeric | awk 'NR>2 {print $5}'| sort -n -t : -k 2,2 | uniq ) 
y=$( netstat --tcp --numeric | awk 'NR>2 {print $5}'| sort -n -t : -k 2,2 | uniq | sed -e 's/\:.*//' ) 



a=$( for i in $y; do
dig @8.8.8.8 -x $i +short | sed 's/[.]$//g'
done )

b=$( for i in $x; do
dig @8.8.8.8 -x $i | grep -e "SOA" -e "PTR" | awk '{print $5}' | grep "." | sed 's/[.]$//g'
done )

echo -e "$a \n$b" | grep "." | cut -c 1-21 | sort | uniq
echo " "
fi

exit

8.8.8.8 (Google) is what is used to look up dns records (my router was too slow). Also, the if then statement at the beginning

if [ "$d" -lt "23" ] && [ "$d" -gt "0" ]; then

is to disable the script if 23 or more ip addresses are connected. Change it to whatever suits you best. I put that there for when I am downloading torrents.

Offline

#1512 2011-08-10 18:48:04

dodo3773
Member
Registered: 2011-03-17
Posts: 818

Re: Post your handy self made command line utilities

Script I made to change hostname then change back on the fly. The "xhost +" is insecure but if you reboot / restart x (to keep new hostname) or change hostname back by re-running the script it will change back to "xhost -". I had to use "xhost +" because nothing else was working without a restart. Because of this it should be more cross compatible between DE's / WM's. The variables at the top of the script (oldhost and newhost) must be set manually before you run the script. What this script does is changes your old host name in your rc.conf and hosts file then runs the hostname command. After that it restarts the network and network manager (if you do not use networkmanager (you use wicd or whatever) then substitute that for something else). Then it flushes your dns and ram caches. 

#! /bin/bash
oldhost=yourcurrenthostname
newhost=newhostname1
host=$(hostname)

if [[ $EUID -ne 0 ]]; then
echo "This script needs to be run as root." 1>&2
exit 1
fi


if [ "$host" = "$oldhost" ]; then
echo "Spoofing hostname to $newhost. To switch back  to $oldhost rerun this script."

sed -i 's/'$oldhost'/'$newhost'/g' /etc/rc.conf
sed -i 's/'$oldhost'/'$newhost'/g' /etc/hosts
hostname $newhost

/etc/rc.d/network restart
/etc/rc.d/networkmanager restart
/etc/rc.d/nscd restart
sync; echo 3 > /proc/sys/vm/drop_caches
xhost +
else
echo "Switching hostname back to $oldhost."
hostname $oldhost
sed -i 's/'$newhost'/'$oldhost'/g' /etc/rc.conf
sed -i 's/'$newhost'/'$oldhost'/g' /etc/hosts
/etc/rc.d/network restart
/etc/rc.d/networkmanager restart
/etc/rc.d/nscd restart
sync; echo 3 > /proc/sys/vm/drop_caches
xhost -
fi

exit

Offline

#1513 2011-08-10 18:55:17

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: Post your handy self made command line utilities

Wrote a pair of bash functions to make (repo and build dir) navigation a little easier. 'up' will try to traverse up the current hierarchy until it finds a matching file. Down will traverse down from $PWD until it finds a matching directory or file. Both are atomic -- that is, they will not unnecessarily disturb $OLDPWD so that 'cd -' will still function as if you changed directories only once.

down:

down() {
  local OPTIND=0 flag= match= pred=
  local -i i=0 first=0
  local -a matches

  _goto() {
    if [[ -d $1 ]]; then
      cd "$1"
    else
      cd "${1%/*}"
    fi
  }

  while getopts 'bcdflps1' flag; do
    case $flag in
      b|c|d|f|l|p|s) pred="-type ${1#-}" ;;
      1) first=1 ;;
      *) return 1 ;;
    esac
  done
  shift $(( OPTIND - 1 ))

  # sort by depth
  while IFS=$'\t' read -r _ match; do
    matches[++i]=$match
  done< <(find . $pred -name "$1" | awk -F'/' '{ printf "%s\t%s\n",NF,$0 }' | sort -n)

  if (( ! ${#matches[*]} )); then
    echo "no matches"
    return 1
  fi

  if (( i == 1 || first )); then
    _goto "${matches[1]}"
  else
    if (( $# == 1 )); then
      i=0
      for match in "${matches[@]}"; do
        (( ++i ))
        printf '%d) %s%s\n' "$i" "${matches[i]}" "$([[ -d ${matches[i]} ]] && printf '/')"
      done
    else
      if (( $2 > i )); then
        return 1
      fi
      _goto "${matches[$2]}"
    fi
  fi
}

up:

up() {
  local x= traverse= curpath=

  [[ $1 ]] || { cd ..; return; } # default to 1 level

  for x; do
    if [[ $x == +([[:digit:]]) ]]; then
      (( x == 0 )) && return # noop

      # build a path to avoid munging OLDPWD
      while (( x-- )); do
        traverse+=../
      done

      cd "$traverse"
    else
      curpath=$PWD

      while [[ $curpath && ! -e $curpath/$x ]]; do
        curpath=${curpath%/*}
      done

      if [[ $curpath ]]; then
        cd "$curpath"
      else
        printf "error: failed to locate \`%s' in a parent directory\n" "$x"
        return 1
      fi
    fi
  done
}

Last edited by falconindy (2011-08-13 14:25:20)

Offline

#1514 2011-08-11 08:48:39

woddfellow2
Member
From: USA
Registered: 2010-04-05
Posts: 113
Website

Re: Post your handy self made command line utilities

Amidoinitrite? Script similar to ratpoison/StumpWM's banish command; uses xrandr, grep, and sed to get resolution; powered by xdotool:

#!/bin/bash

WIDTH=`xrandr 2> /dev/null | grep "current [0-9]* x [0-9]*" | sed -e 's/^[^.]*current //' | sed -e 's/ x [^.]*//'`
HEIGHT=`xrandr 2> /dev/null | grep "current [0-9]* x [0-9]*" | sed -e 's/^[^.]*current [^.]* x //'`

xdotool mousemove $WIDTH $HEIGHT

Last edited by woddfellow2 (2011-08-11 08:50:08)


1-Crawl 2-Cnfg 3-ATF 4-Exit ?

Offline

#1515 2011-08-11 15:35:28

Procyon
Member
Registered: 2008-05-07
Posts: 1,819

Re: Post your handy self made command line utilities

@woddfellow2: You can condense grep and sed with sed -n 's///p'. As well as group multiple sed commands with ;

The cursor is bound, though:
xdotool mousemove 9999 9999

Offline

#1516 2011-08-12 07:41:07

woddfellow2
Member
From: USA
Registered: 2010-04-05
Posts: 113
Website

Re: Post your handy self made command line utilities

Bug fix:

#!/bin/bash

WIDTH=`xrandr 2> /dev/null | grep "current [0-9]* x [0-9]*" | sed -e 's/^[^.]*current //' | sed -e 's/ x [^.]*//'`
HEIGHT=`xrandr 2> /dev/null | grep "current [0-9]* x [0-9]*" | sed -e 's/, maximum [^.]*//' | sed -e 's/^[^.]*current [^.]* x //'`

xdotool mousemove $WIDTH $HEIGHT

(The old version got the height of the maximum instead of the current)

Procyon wrote:

@woddfellow2: You can condense grep and sed with sed -n 's///p'. As well as group multiple sed commands with ;

Maybe I should look into that...

Procyon wrote:

The cursor is bound, though:
xdotool mousemove 9999 9999

xdotool mousemove 9999 9999 seemed like a kluge, and not futureproof enough, in case we eventually end up with >= 10,000 pixels.


1-Crawl 2-Cnfg 3-ATF 4-Exit ?

Offline

#1517 2011-08-13 00:52:13

dodo3773
Member
Registered: 2011-03-17
Posts: 818

Re: Post your handy self made command line utilities

The script I use if devede / mencoder gives me problems (run it from the same directory as your video file):

#! /bin/bash
export VIDEO_FORMAT=NTSC

echo "What is the name of the movie including file extension?"
read moviename

ffmpeg -i $moviename -y -target ntsc-dvd -sameq -aspect 16:9 out.mpg &&

dvdauthor --title -o dvd -f out.mpg &&

dvdauthor -o dvd -T &&

mkisofs -dvd-video -o dvd.iso dvd/ &&

exit

Probably don't need all those ampersands but it has worked well for me.

Last edited by dodo3773 (2011-08-13 00:52:37)

Offline

#1518 2011-08-13 13:15:52

darkbeanies
Member
Registered: 2009-01-14
Posts: 142

Re: Post your handy self made command line utilities

This script adds pdf "title" metadata from the filename using exiftool to any pdfs in the current directory.  Maybe someone can suggest how to clean it up a bit...

ls -1 *.pdf | sed 's/\(.*\)\..*/\1/' > names.txt
ls -1 *.pdf > names2.txt
cat names.txt | sed 's/^/"/' | sed 's/$/"/' > names3
cat names2.txt | sed 's/^/"/' | sed 's/$/"/' > names4
awk 'NR==FNR{a[FNR]=$0;next} {print a[FNR],$0}' names3 names4 > newnames
sed 's/^/exiftool -Title=/' newnames > script
chmod +x script
./script
rm names.txt
rm names2.txt
rm names3
rm names4
rm newnames
rm script
exiftool -delete_original *.pdf

Last edited by darkbeanies (2011-08-14 23:27:24)

Offline

#1519 2011-08-14 03:25:50

hauzer
Member
From: Belgrade, Serbia
Registered: 2010-11-17
Posts: 279
Website

Re: Post your handy self made command line utilities

The script is rather self-explanatory, I wrote it for my brother.

#!/bin/bash
#
# Create a ready to use XPAM Battle.Net account using mailinator as the email provider.
# Usage: xpamreg username password
#
###############
## VARIABLES ##
###############
#
curlargs="-q -s -A 'Mozilla/5.0 (X11; Linux i686; rv:5.0) Gecko/20100101 Firefox/5.0'"
#
###############
## FUNCTIONS ##
###############
#
# Mailinator creates a random email on it's homepage, this function just extracts it
# via grep and sed magic
#
get_tmpmail () {
  curl ${curlargs} http://www.mailinator.com/ | grep 'maildir.jsp?email' | tail -n1 | \
  sed 's/.*email=.*>\(.*\)<\/a>.*/\1/'
}
#
# A unique authentication cookie is created every time the registration page is visited.
# First we need to lure the website into giving us one by making a dummy connection.
# We need the token for POSTing it to the registration form and the cookie to verify with
# the website that we're not a script. ;)
#
register_acc () {
  echo -n " Creating account $1..."

  local cookiejar="/tmp/xpamreg-cookiejar-${RANDOM}"
  local authtoken=$(curl ${curlargs} -c "${cookiejar}" http://app.eurobattle.net/register | \
                    grep -A1 'all fields are required' | tail -n1 | \
                    sed 's/.*value="\(.*\)".*/\1/')

  curl ${curlargs} -b "${cookiejar}" \
       --data-urlencode "authenticity_token=${authtoken}" \
       --data-urlencode "user[name]=$1" \
       --data-urlencode "user[password]=$2" \
       --data-urlencode "user[password_confirmation]=$2" \
       --data-urlencode "user[email]=$3" \
       --data-urlencode "commit=Create Account" app.eurobattle.net > /dev/null

  echo ' Account created!'
}
#
# We first extract the url to the email just recieved and then extract the verification
# url.
#
verify_acc () {
  local emailurl=

  # Check if the verification email has arrived
  echo ' Starting verification...'
  echo "  Waiting for email at $1..."
  while true ; do
    emailurl=$(curl ${curlargs} "http://www.mailinator.com/maildir.jsp?email=$1")
    emailurl=$(echo ${emailurl} | grep 'register@eurobattle.net')

    # If grep didn't fail then we're sure the email is there and we can extract the
    # verification url.
    if [[ $? -eq 0 ]] ; then
      echo '  Email has arrived!'
      emailurl=$(echo ${emailurl} | sed 's/.*<a href=\/\(.*\)>C.*/\1/')

      break
    fi

   echo '   No email has arrived, yet...'
   sleep 1
  done

  echo ' Verifying...'
  local verifyurl=$(curl ${curlargs} "http://www.mailinator.com/${emailurl}" | \
                    grep 'http://app1.eurobattle.net' | sed 's/.*<a href="\(.*\)".*/\1/')
  curl ${curlargs} "${verifyurl}" > /dev/null
  echo ' The account has been verified!'
}
#
##########
## MAIN ##
##########
#
echo Registering account...

email=$(get_tmpmail)
register_acc $1 $2 "${email}"
verify_acc "${email}"

echo Registration completed!

exit 0

I still need to add error checking, though.

Last edited by hauzer (2011-08-14 03:32:27)


Vanity of vanities, saith the Preacher, vanity of vanities; all is vanity.
What profit hath a man of all his labour which he taketh under the sun?
All the rivers run into the sea; yet the sea is not full; unto the place from whence the rivers come, thither they return again.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow.

Offline

#1520 2011-08-14 18:26:11

hauzer
Member
From: Belgrade, Serbia
Registered: 2010-11-17
Posts: 279
Website

Re: Post your handy self made command line utilities

Whew, I've managed to port this thing to Windows! I guess you can port any bash script like this. I used a basic MSYS installation, added a compiled curl binary and striped all the unnecessary stuff. Execution is at least two times slower than in the native environment, but that's subjective and understandable. Here's the "package" download link if anyone's interested: http://ompldr.org/vOXdjcA


Vanity of vanities, saith the Preacher, vanity of vanities; all is vanity.
What profit hath a man of all his labour which he taketh under the sun?
All the rivers run into the sea; yet the sea is not full; unto the place from whence the rivers come, thither they return again.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow.

Offline

#1521 2011-08-18 19:38:52

steabert
Member
Registered: 2011-04-18
Posts: 78

Re: Post your handy self made command line utilities

Already numerous backup scripts, but it is the only bash script I use that I wrote myself.  Makes an incremental backup using hardlinks:

#!/bin/bash

# initial parameters
DRY_RUN=0
VEBROSE=0
RSYNC_ARGS=""

# function which prints usage information
usage () {
        echo "Usage: ${0##*/} [options] SRC BAK"
        echo
        echo "  SRC     source directory "
        echo "  BAK     backup directory "
        echo
        echo "Options:"
        echo "  -h           print this info"
        echo "  -x <pattern> specify excludes (see rsync man page)"
        echo "  -f <file>    use an external exclude file for rsync"
        echo "  -z           compress files during transfer"
        echo "  -v           verbose output"
        echo "  -n           perform a dry-run, no backup is made"
        echo
}

# parse options
while getopts "hx:e:zvn" opt
do
        case $opt in
                h) usage
                        exit 0 ;;
                x) RSYNC_ARGS+=" --exclude='$OPTARG'" ;;
                e) RSYNC_ARGS+=" --exclude-from=$OPTARG" ;;
                z) RSYNC_ARGS+=" -z" ;;
                v) VERBOSE=1
                        RSYNC_ARGS+=" -v" ;;
                n) DRY_RUN=1
                        RSYNC_ARGS+=" -n" ;;
                *) usage
                        exit 1;;
        esac
done

# set source and destination directories
shift $(($OPTIND-1))
if [[ -z "$1" || -z "$2" ]]; then
        echo "ERROR: missing argument(s)"
        usage
        exit 1
else
        srcdir="$1"
        bakdir="$2"
fi

# paranoia sanity check, shouldn't happen
if [[ -z "$bakdir" ]]; then
        echo "ERROR: backup directory empty"
        exit 1
fi

# create the backup ID
id="$(hostname)-$(date +%Y-%m-%d-%H.%M.%S-%N)"

if ((DRY_RUN)); then
        echo "==> dry-run, no actual backup is made!"
else
        echo "==> making backup of $srcdir to $bakdir/$id"
        mkdir -p "$bakdir/$id"
fi

# rsync the contents of the source to the destination directory:
# -> creates hardlinks of unaltered files against the most recent backup that was made
# -> uses relative paths to preserve full path on the backup, so that
#    a backup of /home/user/foo on /backup becomes /backup/id/home/user/foo

rsync -aR $RSYNC_ARGS --link-dest="$bakdir/recent" "$srcdir/" "$bakdir/$id"

rc=$?
if (($rc)); then
        echo "ERROR: rsync exited with value $rc"
        exit 1
fi

# update link pointing to most recent backup

ln -sfT "$bakdir/$id" "$bakdir/recent"

exit 0

Offline

#1522 2011-08-21 09:59:12

ShionjiYuuko
Member
Registered: 2011-07-31
Posts: 67

Re: Post your handy self made command line utilities

this is my flac batch-tagging script based on EAC cue file, relies heavily on sed. dirty hack, poorly written since I can't get splitting-converting-tagging to work in one shot using shnsplit

first we split the audio file with shnsplit into separate wav files, then we convert the wav files to flac. the result are files with name split-track*.flac

I assume that the available comments are only ALBUM, ARTIST, and DISCID. some cue files have more than that.

applymflac.sh <utf8-or-ascii-but-not-that-annoying-SJIS-please>.cue

#!/bin/sh


TOTALTRACKS=`tail -n 3 $1 | sed -e 's/  TRACK //' -e 's/ AUDIO//' -e 'q'`
ALBUM=`sed -e '1,/PERFORMER/ d' -e 's/TITLE //' -e 's/"//g' -e 'q' $1`
ARTIST=`sed -e  '1,/REM/ d' -e 's/PERFORMER //' -e 's/"//g' -e 'q' $1`
DISCID=`sed -e '/REM DISCID/ s/REM DISCID //' -e 'q' $1`


lump=`sed -e '1,/FILE/ d' -e 's/  TRACK.*//g' -e 's/    INDEX.*//g' $1`

for i in `seq 1 $TOTALTRACKS`;
do
        test $i -lt 10 && TRACKNUMBER=`echo 0$i` || TRACKNUMBER=$i
        target=`echo split-track$TRACKNUMBER.flac`
        echo "Applying tags for track $TRACKNUMBER, filename: $target"
        TITLE=`echo $lump | sed -e 's/TITLE //' -e 's/"//' -e 's/"//' | sed 's/ TITLE.*//' `
        lump=`echo $lump | sed -e 's/TITLE //' -e 's/"//' -e 's/"//' | sed "s/$TITLE //" `
        echo $TRACKNUMBER $TITLE
        metaflac --set-tag="TITLE=$TITLE" --set-tag="ALBUM=$ALBUM" --set-tag="ARTIST=$ARTIST" --set-tag="TRACKNUMBER=$TRACKNUMBER" --set-tag="TOTALTRACKS=$TOTALTRACKS" --set-tag="DISCID=$DISCID" $target
done;

if only I knew a proper way to use shnsplit, I won't spend the whole afternoon to learn sed and write this big_smile

oh yeah, metadata tags are more important than filenames to me... smile

Last edited by ShionjiYuuko (2011-08-21 10:02:00)


始まりの荒野を独り もう歩き出してるらしい、僕は灰になるまで僕で有り続けたい
http://about.me/nnhnkn | http://identi.ca/nnhzkn

Offline

#1523 2011-08-21 18:11:13

dodo3773
Member
Registered: 2011-03-17
Posts: 818

Re: Post your handy self made command line utilities

I had to put a limited access guest computer together so I put this right before the daemons section in rc.multi:

timeofday=$( date | awk '{print $4}' | cut -f"1" -d":" )

if [ "$timeofday" -gt "6" ] && [ "$timeofday" -lt "22" ] ; then
echo "boot"
else
poweroff
fi

If it is before 6 A.M. or after 10 P.M. the computer will not boot. Right before it loads the daemons it will just shut down.

Last edited by dodo3773 (2011-08-21 18:11:29)

Offline

#1524 2011-08-21 18:46:43

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: Post your handy self made command line utilities

hr=$(date +%H')
(( hr < 6 || hr > 22 )) && poweroff

Offline

#1525 2011-08-21 18:56:05

dodo3773
Member
Registered: 2011-03-17
Posts: 818

Re: Post your handy self made command line utilities

falconindy wrote:
hr=$(date +%H')
(( hr < 6 || hr > 22 )) && poweroff

Nice. Talk about clean. I should use "or" more often. I probably won't go re-write it but I will certainly be using it in the future. Thanks for the tip.

Offline

Board footer

Powered by FluxBB