You are not logged in.

Pages: 1

#1 2011-08-01 17:03:10

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Need help with boot

Hello all!
After some weeks I didn't turn on my pc, now it doesn't boot. Udev doesn't start while booting. Just writes what can't mount /dev/sda3 partition whitch is my / partition and I need to type my root password or press Ctrl+D to restart. I use grub2, whe menu.lst file is almost original and I have no idea what's wrong. Help me please.
P.S. when I type my password system takes me to console and I am allowed to use console programs like ranger. In ranger I can see my / partition, but where is no my home partition in /home directory, which is /dev/sda4.
LiveCD works ok and I am allowed to use all my data and partitions.

Offline

#2 2011-08-01 17:34:44

MoonSwan
Member
From: Great White North
Registered: 2008-01-23
Posts: 881

Re: Need help with boot

So you can't start X, correct?  Are you at a rescue shell prompt or a normal prompt?  What have you tried and what has changed since you last booted the system?  If it's just X that is refusing to run try removing any xorg.conf files or renaming them and testing X again.  Did you do a Pacman -Syu before you tried to run the system as usual?

Need errors or logs or soemthing more to go on.  Without more info we can't help you.

Offline

#3 2011-08-01 17:46:01

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

I am in rescue prompt. I've tried to mount my /dev/sda3 partition manually, but it tells me, that can't find it. fsck gived me the same result.
I didn't update my system after last successfull boot. And the intresting is that system tells me about the errors with mpunting sda3, but in rescue prompt I can see it, howether /home directory (sda4) is empty.
What logs do You need?

Offline

#4 2011-08-01 19:36:27

perbh
Member
From: Republic of Texas
Registered: 2005-03-04
Posts: 765

Re: Need help with boot

either you are using grub2 - in which case you have a 'grub.cfg' -or- you are using legacy grub with 'menu.lst'
grub2 doesn't use 'menu.lst'.

Offline

#5 2011-08-01 20:12:48

MoonSwan
Member
From: Great White North
Registered: 2008-01-23
Posts: 881

Re: Need help with boot

If you have a kernel log or faillog or dmesg.log or syslog ... assuming they have errors that they are spitting out for us to look at. tongue

More seriously have you tried to chroot into the system and repair there?

As perbh pointed out, you're using a menu.lst (old grub) with the new grub2.  I would suggest that you go to the rescue prompt OR (better) chroot into the old system and have grub2 convert your menu.lst file to a proper grub2 file.

From the wiki on Grub2:  Upgrading from grub-legacy (BIOS systems alone)

 Remove grub-legacy traces from the MBR using: 

# dd if=/dev/zero of=<your_disk> bs=440 count=1

    Follow the #BIOS systems instructions.
    Convert your /boot/grub/menu.lst to grub.cfg format using: 

# grub-menulst2cfg /boot/grub/menu.lst /boot/grub/grub.cfg

Try that and see if it helps.

Offline

#6 2011-08-02 01:25:27

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

Sorry, I used to use grub2 on my other computer. There is just grub. My fall, I'm sorry.

Offline

#7 2011-08-02 12:58:39

perbh
Member
From: Republic of Texas
Registered: 2005-03-04
Posts: 765

Re: Need help with boot

If that's the case - could you please give us your 'menu.lst'?

Offline

#8 2011-08-02 14:58:15

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

Of course, take a look:

# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS 
#
#  Linux           Grub
# -------------------------
#  /dev/fd0        (fd0)
#  /dev/sda        (hd0)
#  /dev/sdb2       (hd1,1)
#  /dev/sda3       (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#     +-------------------------------------------------+
#          | 640x480    800x600    1024x768   1280x1024
#      ----+--------------------------------------------
#      256 | 0x301=769  0x303=771  0x305=773   0x307=775
#      32K | 0x310=784  0x313=787  0x316=790   0x319=793
#      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
#      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
#     +-------------------------------------------------+
#  for more details and different resolutions see
#  http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution 

# general configuration:
timeout   0
default   0
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title  Arch Linux
root   (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
initrd /kernel26.img

# (1) Arch Linux
title  Arch Linux Fallback
root   (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
initrd /kernel26-fallback.img

# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1

But I don't think the problem is here, couse I didn't edit it for a long time.

Offline

#9 2011-08-02 15:07:16

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

MoonSwan wrote:

If you have a kernel log or faillog or dmesg.log or syslog ... assuming they have errors that they are spitting out for us to look at. tongue

dmesg.log:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011
[    0.000000] Command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. EP43-S3L/EP43-S3L, BIOS F8 09/22/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 130000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CFF00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5690] f5690
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[    0.000000]  0000000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cfee0000 page 4k
[    0.000000] kernel direct mapping tables up to cfee0000 @ cfeda000-cfee0000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
[    0.000000] RAMDISK: 37e40000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f7080 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000cfee3180 04B8A (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000cfee0000 00040
[    0.000000] ACPI: HPET 00000000cfee7e80 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000cfee7f00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000cfee7d80 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000cfee85a0 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [000000012fffb000 - 000000012fffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cfee0
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1048175
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833304 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[    0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[    0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[    0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83136 r8192 d23360 u524288
[    0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031146
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4055384k/4980736k available (4019k kernel code, 788036k absent, 137316k reserved, 3335k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3166.654 MHz processor.
[    0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6335.19 BogoMIPS (lpj=10555513)
[    0.003395] pid_max: default: 32768 minimum: 301
[    0.003510] Security Framework initialized
[    0.003542] AppArmor: AppArmor disabled by boot time parameter
[    0.006914] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008537] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009309] Mount-cache hash table entries: 256
[    0.009640] Initializing cgroup subsys ns
[    0.009670] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.009705] Initializing cgroup subsys cpuacct
[    0.009756] Initializing cgroup subsys memory
[    0.009796] Initializing cgroup subsys devices
[    0.009825] Initializing cgroup subsys freezer
[    0.009854] Initializing cgroup subsys net_cls
[    0.009882] Initializing cgroup subsys blkio
[    0.009950] CPU: Physical Processor ID: 0
[    0.009978] CPU: Processor Core ID: 0
[    0.010007] mce: CPU supports 6 MCE banks
[    0.010041] CPU0: Thermal monitoring enabled (TM2)
[    0.010071] using mwait in idle threads.
[    0.010933] ACPI: Core revision 20110316
[    0.013361] ftrace: allocating 15965 entries in 63 pages
[    0.016697] Setting APIC routing to flat
[    0.017018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052003] CPU0: Intel(R) Core(TM)2 Duo CPU     E8500  @ 3.16GHz stepping 0a
[    0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.053330] ... version:                2
[    0.053330] ... bit width:              40
[    0.053330] ... generic registers:      2
[    0.053330] ... value mask:             000000ffffffffff
[    0.053330] ... max period:             000000007fffffff
[    0.053330] ... fixed-purpose events:   3
[    0.053330] ... event mask:             0000000700000003
[    0.070071] NMI watchdog enabled, takes one hw-pmu counter.
[    0.096674] Booting Node   0, Processors  #1
[    0.096727] smpboot cpu 1: start_ip = 9a000
[    0.193346] NMI watchdog enabled, takes one hw-pmu counter.
[    0.203325] Brought up 2 CPUs
[    0.203357] Total of 2 processors activated (12706.79 BogoMIPS).
[    0.204779] devtmpfs: initialized
[    0.204779] PM: Registering ACPI NVS region at cfee0000 (12288 bytes)
[    0.204779] print_constraints: dummy: 
[    0.204779] NET: Registered protocol family 16
[    0.204779] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.204779] ACPI: bus type pci registered
[    0.204779] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.204779] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.211260] PCI: Using configuration type 1 for base access
[    0.213358] bio: create slab <bio-0> at 0
[    0.213894] ACPI: EC: Look up EC in DSDT
[    0.218082] ACPI: SSDT 00000000cfee7f80 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.218283] ACPI: Dynamic OEM Table Load:
[    0.218356] ACPI: SSDT           (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.218513] ACPI: SSDT 00000000cfee8440 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.218704] ACPI: Dynamic OEM Table Load:
[    0.218776] ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.218946] ACPI: Interpreter enabled
[    0.218976] ACPI: (supports S0 S3 S4 S5)
[    0.219103] ACPI: Using IOAPIC for interrupt routing
[    0.221962] ACPI: No dock devices found.
[    0.221991] HEST: Table not found.
[    0.222020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.222086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.222185] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.222216] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.222246] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.222279] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.222847] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[    0.222888] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[    0.222915] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[    0.222936] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.222938] pci 0000:00:01.0: PME# disabled
[    0.222966] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[    0.223000] pci 0000:00:1a.0: reg 20: [io  0xe100-0xe11f]
[    0.223034] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[    0.223067] pci 0000:00:1a.1: reg 20: [io  0xe200-0xe21f]
[    0.223101] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[    0.223134] pci 0000:00:1a.2: reg 20: [io  0xe000-0xe01f]
[    0.223172] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[    0.223185] pci 0000:00:1a.7: reg 10: [mem 0xe8104000-0xe81043ff]
[    0.223249] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[    0.223261] pci 0000:00:1b.0: reg 10: [mem 0xe8100000-0xe8103fff 64bit]
[    0.223303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.223305] pci 0000:00:1b.0: PME# disabled
[    0.223319] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[    0.223354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.223357] pci 0000:00:1c.0: PME# disabled
[    0.223376] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[    0.223418] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.223421] pci 0000:00:1c.4: PME# disabled
[    0.223436] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[    0.223478] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.223480] pci 0000:00:1c.5: PME# disabled
[    0.223498] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[    0.223531] pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
[    0.223565] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[    0.223599] pci 0000:00:1d.1: reg 20: [io  0xe400-0xe41f]
[    0.223633] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[    0.223666] pci 0000:00:1d.2: reg 20: [io  0xe500-0xe51f]
[    0.223704] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[    0.223717] pci 0000:00:1d.7: reg 10: [mem 0xe8105000-0xe81053ff]
[    0.223779] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.223822] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[    0.223909] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[    0.223921] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.223927] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.223933] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.223939] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.223945] pci 0000:00:1f.2: reg 20: [io  0xf000-0xf00f]
[    0.223951] pci 0000:00:1f.2: reg 24: [io  0xf100-0xf10f]
[    0.223978] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[    0.223990] pci 0000:00:1f.3: reg 10: [mem 0xe8106000-0xe81060ff 64bit]
[    0.224006] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.224030] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[    0.224041] pci 0000:00:1f.5: reg 10: [io  0xe700-0xe707]
[    0.224047] pci 0000:00:1f.5: reg 14: [io  0xe800-0xe803]
[    0.224053] pci 0000:00:1f.5: reg 18: [io  0xe900-0xe907]
[    0.224059] pci 0000:00:1f.5: reg 1c: [io  0xea00-0xea03]
[    0.224065] pci 0000:00:1f.5: reg 20: [io  0xeb00-0xeb0f]
[    0.224071] pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
[    0.224118] pci 0000:01:00.0: [1002:9440] type 0 class 0x000300
[    0.224129] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.224137] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff 64bit]
[    0.224143] pci 0000:01:00.0: reg 20: [io  0xb000-0xb0ff]
[    0.224153] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.224167] pci 0000:01:00.0: supports D1 D2
[    0.224181] pci 0000:01:00.1: [1002:aa30] type 0 class 0x000403
[    0.224191] pci 0000:01:00.1: reg 10: [mem 0xe5010000-0xe5013fff 64bit]
[    0.224228] pci 0000:01:00.1: supports D1 D2
[    0.224244] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.224274] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.224276] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.224279] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.224309] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.224339] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.224342] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.224347] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.224391] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
[    0.224417] pci 0000:03:00.0: reg 10: [io  0xc000-0xc007]
[    0.224429] pci 0000:03:00.0: reg 14: [io  0xc100-0xc103]
[    0.224441] pci 0000:03:00.0: reg 18: [io  0xc200-0xc207]
[    0.224452] pci 0000:03:00.0: reg 1c: [io  0xc300-0xc303]
[    0.224464] pci 0000:03:00.0: reg 20: [io  0xc400-0xc40f]
[    0.224534] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.224565] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.224567] pci 0000:00:1c.4:   bridge window [mem 0xe6000000-0xe6ffffff]
[    0.224571] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.224616] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.224630] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.224654] pci 0000:04:00.0: reg 18: [mem 0xe8010000-0xe8010fff 64bit pref]
[    0.224669] pci 0000:04:00.0: reg 20: [mem 0xe8000000-0xe800ffff 64bit pref]
[    0.224679] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.224712] pci 0000:04:00.0: supports D1 D2
[    0.224714] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224718] pci 0000:04:00.0: PME# disabled
[    0.224746] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.224777] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.224779] pci 0000:00:1c.5:   bridge window [mem 0xe7000000-0xe7ffffff]
[    0.224784] pci 0000:00:1c.5:   bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[    0.224832] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.224863] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.224866] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.224870] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.224872] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.224874] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.224875] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.224877] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.224879] pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.224895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.224961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.224984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.225008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.225027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.225077]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.225107] Unable to assume _OSC PCIe control. Disabling ASPM
[    0.230967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.231315] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.231663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.232011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.232358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.232750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.233097] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.233419] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.233809] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.233844] vgaarb: loaded
[    0.233931] PCI: Using ACPI for IRQ routing
[    0.233960] PCI: pci_cache_line_size set to 64 bytes
[    0.234020] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.234022] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff 
[    0.234113] NetLabel: Initializing
[    0.234141] NetLabel:  domain hash size = 128
[    0.234169] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.234208] NetLabel:  unlabeled traffic allowed by default
[    0.234246] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.234278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.234418] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.243335] Switching to clocksource hpet
[    0.243372] Switched to NOHz mode on CPU #0
[    0.246609] Switched to NOHz mode on CPU #1
[    0.247851] pnp: PnP ACPI init
[    0.247887] ACPI: bus type pnp registered
[    0.247960] pnp 00:00: [bus 00-3f]
[    0.247962] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.247963] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.247965] pnp 00:00: [io  0x0d00-0xffff window]
[    0.247966] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.247968] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.247969] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[    0.248003] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.248049] pnp 00:01: [io  0x0010-0x001f]
[    0.248051] pnp 00:01: [io  0x0022-0x003f]
[    0.248052] pnp 00:01: [io  0x0044-0x005f]
[    0.248053] pnp 00:01: [io  0x0062-0x0063]
[    0.248054] pnp 00:01: [io  0x0065-0x006f]
[    0.248055] pnp 00:01: [io  0x0074-0x007f]
[    0.248056] pnp 00:01: [io  0x0091-0x0093]
[    0.248057] pnp 00:01: [io  0x00a2-0x00bf]
[    0.248059] pnp 00:01: [io  0x00e0-0x00ef]
[    0.248060] pnp 00:01: [io  0x04d0-0x04d1]
[    0.248061] pnp 00:01: [io  0x0290-0x029f]
[    0.248062] pnp 00:01: [io  0x0800-0x087f]
[    0.248063] pnp 00:01: [io  0x0290-0x0294]
[    0.248064] pnp 00:01: [io  0x0880-0x088f]
[    0.248065] pnp 00:01: [io  0x04c0-0x04ff]
[    0.248113] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.248143] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.248173] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.248203] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.248232] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.248262] system 00:01: [io  0x04c0-0x04ff] could not be reserved
[    0.248293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.248300] pnp 00:02: [dma 4]
[    0.248302] pnp 00:02: [io  0x0000-0x000f]
[    0.248303] pnp 00:02: [io  0x0080-0x0090]
[    0.248304] pnp 00:02: [io  0x0094-0x009f]
[    0.248305] pnp 00:02: [io  0x00c0-0x00df]
[    0.248324] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.248356] pnp 00:03: [irq 0 disabled]
[    0.248363] pnp 00:03: [irq 8]
[    0.248364] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.248387] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.248403] pnp 00:04: [io  0x0070-0x0073]
[    0.248424] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.248431] pnp 00:05: [io  0x0061]
[    0.248452] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.248458] pnp 00:06: [io  0x00f0-0x00ff]
[    0.248462] pnp 00:06: [irq 13]
[    0.248483] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.248557] pnp 00:07: [io  0x03f0-0x03f5]
[    0.248559] pnp 00:07: [io  0x03f7]
[    0.248562] pnp 00:07: [irq 6]
[    0.248563] pnp 00:07: [dma 2]
[    0.248592] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.248697] pnp 00:08: [io  0x03f8-0x03ff]
[    0.248701] pnp 00:08: [irq 4]
[    0.248742] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.248856] pnp 00:09: [io  0x0378-0x037f]
[    0.248860] pnp 00:09: [irq 7]
[    0.248893] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.248958] pnp 00:0a: [io  0x0060]
[    0.248959] pnp 00:0a: [io  0x0064]
[    0.248963] pnp 00:0a: [irq 12]
[    0.248984] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.249017] pnp 00:0b: [io  0x0400-0x04bf]
[    0.249052] system 00:0b: [io  0x0400-0x04bf] has been reserved
[    0.249083] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.249196] pnp 00:0c: [mem 0xe0000000-0xe3ffffff]
[    0.249236] system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.249267] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.249343] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
[    0.249344] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
[    0.249346] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.249347] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.249348] pnp 00:0d: [mem 0xcfee0000-0xcfefffff]
[    0.249349] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.249351] pnp 00:0d: [mem 0x00100000-0xcfedffff]
[    0.249352] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.249355] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    0.249356] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.249357] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.249359] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.249360] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.249361] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.249408] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.249439] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.249470] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.249500] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.249531] system 00:0d: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.249561] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.249592] system 00:0d: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.249622] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.249652] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.249683] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.249713] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.249743] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.249773] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.249803] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.249833] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.249845] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.249874] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.249878] pnp: PnP ACPI: found 15 devices
[    0.249906] ACPI: ACPI bus type pnp unregistered
[    0.255617] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe8200000-0xe83fffff 64bit pref]
[    0.255652] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8400000-0xe85fffff]
[    0.255684] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8600000-0xe87fffff 64bit pref]
[    0.255718] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.255748] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[    0.255782] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.255811] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.255841] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
[    0.255872] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.255907] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.255936] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.255968] pci 0000:00:1c.0:   bridge window [mem 0xe8400000-0xe85fffff]
[    0.255999] pci 0000:00:1c.0:   bridge window [mem 0xe8600000-0xe87fffff 64bit pref]
[    0.256035] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.256065] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.256097] pci 0000:00:1c.4:   bridge window [mem 0xe6000000-0xe6ffffff]
[    0.256128] pci 0000:00:1c.4:   bridge window [mem 0xe8200000-0xe83fffff 64bit pref]
[    0.256164] pci 0000:04:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff pref]
[    0.256197] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.256227] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.256259] pci 0000:00:1c.5:   bridge window [mem 0xe7000000-0xe7ffffff]
[    0.256290] pci 0000:00:1c.5:   bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[    0.256326] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.256355] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.256386] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.256416] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.256453] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.256484] pci 0000:00:01.0: setting latency timer to 64
[    0.256488] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.256520] pci 0000:00:1c.0: setting latency timer to 64
[    0.256524] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.256555] pci 0000:00:1c.4: setting latency timer to 64
[    0.256560] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.256591] pci 0000:00:1c.5: setting latency timer to 64
[    0.256596] pci 0000:00:1e.0: setting latency timer to 64
[    0.256598] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.256600] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.256601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.256603] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.256604] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.256606] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.256607] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.256609] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.256610] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.256612] pci_bus 0000:02: resource 1 [mem 0xe8400000-0xe85fffff]
[    0.256613] pci_bus 0000:02: resource 2 [mem 0xe8600000-0xe87fffff 64bit pref]
[    0.256615] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.256617] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe6ffffff]
[    0.256618] pci_bus 0000:03: resource 2 [mem 0xe8200000-0xe83fffff 64bit pref]
[    0.256620] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.256621] pci_bus 0000:04: resource 1 [mem 0xe7000000-0xe7ffffff]
[    0.256623] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xe80fffff 64bit pref]
[    0.256624] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.256626] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.256627] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.256629] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.256630] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.256691] NET: Registered protocol family 2
[    0.256846] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.257622] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.260343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.260736] TCP: Hash tables configured (established 524288 bind 65536)
[    0.260766] TCP reno registered
[    0.260800] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.260856] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.261103] NET: Registered protocol family 1
[    0.261271] pci 0000:01:00.0: Boot video device
[    0.261279] PCI: CLS 32 bytes, default 64
[    0.261320] Unpacking initramfs...
[    0.280521] Freeing initrd memory: 1728k freed
[    0.280747] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.280777] Placing 64MB software IO TLB between ffff8800cbeda000 - ffff8800cfeda000
[    0.280811] software IO TLB at phys 0xcbeda000 - 0xcfeda000
[    0.281112] audit: initializing netlink socket (disabled)
[    0.281149] type=2000 audit(1309681092.279:1): initialized
[    0.281549] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.283195] VFS: Disk quotas dquot_6.5.2
[    0.283324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.283483] msgmni has been set to 7924
[    0.283664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.283722] io scheduler noop registered
[    0.283751] io scheduler deadline registered
[    0.283811] io scheduler cfq registered (default)
[    0.283920] pcieport 0000:00:01.0: setting latency timer to 64
[    0.283942] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.283973] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.283999] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.284043] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.284069] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.284110] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.284136] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.284239] intel_idle: MWAIT substates: 0x22220
[    0.284240] intel_idle: does not run on family 6 model 23
[    0.284245] ERST: Table is not found!
[    0.284310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.304821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.520640] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.573586] Linux agpgart interface v0.103
[    0.573677] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.573707] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.574077] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.574138] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.574260] mousedev: PS/2 mouse device common for all mice
[    0.574354] rtc_cmos 00:04: RTC can wake from S4
[    0.600105] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.600160] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.600205] cpuidle: using governor ladder
[    0.600234] cpuidle: using governor menu
[    0.600407] TCP cubic registered
[    0.600436] NET: Registered protocol family 17
[    0.600470] Registering the dns_resolver key type
[    0.600564] PM: Hibernation image not present or could not be loaded.
[    0.600567] registered taskstats version 1
[    0.601031] rtc_cmos 00:04: setting system clock to 2011-07-03 08:18:13 UTC (1309681093)
[    0.601083] Initializing network drop monitor service
[    0.602022] Freeing unused kernel memory: 712k freed
[    0.602239] Write protecting the kernel read-only data: 6144k
[    0.602468] Freeing unused kernel memory: 60k freed
[    0.604398] Freeing unused kernel memory: 784k freed
[    0.611895] udevd[53]: starting version 171
[    0.669709] SCSI subsystem initialized
[    0.686607] libata version 3.00 loaded.
[    0.687348] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.687411] pata_jmicron 0000:03:00.0: setting latency timer to 64
[    0.687623] scsi0 : pata_jmicron
[    0.687706] scsi1 : pata_jmicron
[    0.688068] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[    0.688099] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[    0.698563] ata_piix 0000:00:1f.2: version 2.13
[    0.698616] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.698649] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.698816] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.699016] scsi2 : ata_piix
[    0.699082] scsi3 : ata_piix
[    0.699361] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.699394] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.699443] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.699486] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.700200] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.700348] scsi4 : ata_piix
[    0.700415] scsi5 : ata_piix
[    0.700674] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[    0.700706] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[    0.847198] ata1.00: ATAPI: PIONEER DVD-RW  DVR-112, 1.15, max UDMA/66
[    0.847229] ata1.00: limited to UDMA/33 due to 40-wire cable
[    0.860530] ata1.00: configured for UDMA/33
[    0.873346] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112  1.15 PQ: 0 ANSI: 5
[    1.030714] ata5: SATA link down (SStatus 0 SControl 300)
[    1.174170] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.180268] ata6.00: HPA detected: current 1250261615, native 1250263728
[    1.180306] ata6.00: ATA-8: WDC WD6400AAKS-00E4A0, 05.01D05, max UDMA/133
[    1.180340] ata6.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.186942] ata6.00: configured for UDMA/133
[    1.283819] Refined TSC clocksource calibration: 3166.306 MHz.
[    1.283855] Switching to clocksource tsc
[    1.497568] ata4.00: SATA link down (SStatus 0 SControl 300)
[    1.497610] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.508469] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.508508] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.508544] ata3.01: link offline, clearing class 3 to NONE
[    1.513515] ata4.01: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    1.513553] ata4.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.524091] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[    6.507978] ata4.01: configured for UDMA/133
[    7.400696] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.400740] ata3.01: SATA link down (SStatus 0 SControl 300)
[    7.400781] ata3.01: link offline, clearing class 3 to NONE
[   12.400139] ata3.00: qc timeout (cmd 0xa1)
[   12.400172] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   12.400209] ata3.00: limiting SATA link speed to 1.5 Gbps
[   13.194235] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   13.194279] ata3.01: SATA link down (SStatus 0 SControl 300)
[   13.194319] ata3.01: link offline, clearing class 3 to NONE
[   13.210692] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[   19.993662] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   19.993706] ata3.01: SATA link down (SStatus 0 SControl 300)
[   19.993747] ata3.01: link offline, clearing class 3 to NONE
[   19.993841] scsi 3:0:1:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[   19.994011] scsi 5:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 05.0 PQ: 0 ANSI: 5
[   20.002921] sd 3:0:1:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[   20.002987] sd 3:0:1:0: [sda] Write Protect is off
[   20.003017] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[   20.003031] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.003301] sd 5:0:0:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[   20.003373] sd 5:0:0:0: [sdb] Write Protect is off
[   20.003403] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   20.003418] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.015573]  sdb: sdb1
[   20.015681]  sda: sda1 sda2 sda3 sda4
[   20.015805] sd 5:0:0:0: [sdb] Attached SCSI disk
[   20.015955] sd 3:0:1:0: [sda] Attached SCSI disk
[   20.025385] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.025426] cdrom: Uniform CD-ROM driver Revision: 3.20
[   20.025626] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   20.503523] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   21.720234] udevd[241]: starting version 171
[   21.849284] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[   21.849289] ACPI: Power Button [PWRB]
[   21.849336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   21.849338] ACPI: Power Button [PWRF]
[   21.909230] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   21.909234] Disabling lock debugging due to kernel taint
[   21.960993] [fglrx] Maximum main memory to use for locked dma buffers: 3801 MBytes.
[   21.961188] [fglrx]   vendor: 1002 device: 9440 count: 1
[   21.961560] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[   21.961570] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.961574] pci 0000:01:00.0: setting latency timer to 64
[   21.961775] [fglrx] Kernel PAT support is enabled
[   21.961791] [fglrx] module loaded - fglrx 8.85.6 [Apr 19 2011] with 1 minors
[   22.112266] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   22.112311] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   22.112329] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   22.200599] ACPI: acpi_idle registered with cpuidle
[   22.200655] Marking TSC unstable due to TSC halts in idle
[   22.203161] Switching to clocksource hpet
[   22.216025] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.216082] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   22.216101] HDA Intel 0000:01:00.1: setting latency timer to 64
[   22.221167] iTCO_vendor_support: vendor-support=0
[   22.241200] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   22.241269] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
[   22.241300] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   22.241314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   22.279576] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   22.305609] Floppy drive(s): fd0 is 1.44M
[   22.320314] FDC 0 is a post-1991 82077
[   22.423422] usbcore: registered new interface driver usbfs
[   22.423488] usbcore: registered new interface driver hub
[   22.423628] usbcore: registered new device driver usb
[   22.447059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   22.447088] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   22.447114] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   22.447117] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   22.447134] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   22.461785] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   22.461798] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   22.461836] r8169 0000:04:00.0: setting latency timer to 64
[   22.461895] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[   22.462108] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000666000, 00:1f:d0:8c:36:ca, XID 1c4000c0 IRQ 46
[   22.463918] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[   22.463934] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8104000
[   22.465525] IT8718 SuperIO detected.
[   22.465700] parport_pc 00:09: reported by Plug and Play ACPI
[   22.465755] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   22.471538] ppdev: user-space parallel port driver
[   22.476684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   22.476836] hub 1-0:1.0: USB hub found
[   22.476845] hub 1-0:1.0: 6 ports detected
[   22.476907] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   22.476921] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   22.476923] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   22.476934] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   22.501210] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   22.501224] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8105000
[   22.513363] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   22.513456] hub 2-0:1.0: USB hub found
[   22.513459] hub 2-0:1.0: 6 ports detected
[   22.604551] uhci_hcd: USB Universal Host Controller Interface driver
[   22.604601] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   22.604608] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   22.604610] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   22.604620] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   22.609461] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   22.609490] sd 3:0:1:0: Attached scsi generic sg1 type 0
[   22.609513] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   22.616717] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[   22.616861] hub 3-0:1.0: USB hub found
[   22.616865] hub 3-0:1.0: 2 ports detected
[   22.616919] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   22.616924] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   22.616926] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   22.616932] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   22.626727] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[   22.626863] hub 4-0:1.0: USB hub found
[   22.626866] hub 4-0:1.0: 2 ports detected
[   22.626916] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   22.626921] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[   22.626923] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   22.626929] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   22.640057] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[   22.640206] hub 5-0:1.0: USB hub found
[   22.640209] hub 5-0:1.0: 2 ports detected
[   22.640287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   22.640292] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   22.640294] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   22.640301] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   22.653412] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[   22.653525] hub 6-0:1.0: USB hub found
[   22.653528] hub 6-0:1.0: 2 ports detected
[   22.653580] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   22.653585] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   22.653587] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   22.653592] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   22.663388] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[   22.663483] hub 7-0:1.0: USB hub found
[   22.663486] hub 7-0:1.0: 2 ports detected
[   22.663537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   22.663542] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   22.663545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   22.663550] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   22.673377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[   22.673517] hub 8-0:1.0: USB hub found
[   22.673520] hub 8-0:1.0: 2 ports detected
[   22.890030] usb 2-6: new high speed USB device number 2 using ehci_hcd
[   23.088194] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[   23.320022] usb 3-2: new full speed USB device number 2 using uhci_hcd
[   23.501917] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[   23.519193] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   23.856585] Linux media interface: v0.10
[   23.893017] Linux video capture interface: v2.00
[   23.913937] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3330)
[   23.916866] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input4
[   23.916907] usbcore: registered new interface driver uvcvideo
[   23.916909] USB Video Class driver (v1.0.0)
[   23.936777] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[   23.936831] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input0
[   23.941854] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input6
[   23.941970] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input1
[   23.941986] usbcore: registered new interface driver usbhid
[   23.941987] usbhid: USB HID core driver
[   24.403677] EXT4-fs (sda3): re-mounted. Opts: (null)
[   24.564686] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   24.592114] Adding 2104508k swap on /dev/sda2.  Priority:-1 extents:1 across:2104508k

Offline

#10 2011-08-02 17:30:05

MoonSwan
Member
From: Great White North
Registered: 2008-01-23
Posts: 881

Re: Need help with boot

Unfortunately I don't see any errors in your dmesg output.  Have you found any errors in any of the logs you have now?

Offline

#11 2011-08-02 17:37:00

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

MoonSwan wrote:

Unfortunately I don't see any errors in your dmesg output.  Have you found any errors in any of the logs you have now?

No, I don't. So what's what I'm talking about. No updating, no config editing, but it just doesn't boot any more. The partitions are good too, couse I'm using it via liveCD right now.
Maby it's problem with udev?

Last edited by anabolikas (2011-08-02 17:38:00)

Offline

#12 2011-08-03 18:10:17

anabolikas
Member
Registered: 2010-05-05
Posts: 45

Re: Need help with boot

I've just dried to downgrade udev, but that didn't help.

Offline

#13 2011-08-03 20:15:46

MoonSwan
Member
From: Great White North
Registered: 2008-01-23
Posts: 881

Re: Need help with boot

Sorry but I have no idea where to even begin looking for this issue.  sad  Can you see the messages at all, IE does the system just refuse to boot from the bootloader ?  It doesn't crap out half-way through the boot process?

I have had my bios change the order of my disks a few times (old motherboard before this one) and you may wish to check your bios's screens to see if any of that is coming up.

If you go to the grub cli/prompt have you tried to either re-install grub from there or boot it up manually?

Offline

Pages: 1

Board footer

Powered by FluxBB