Arch Linux

Fuentes

Member

Registered: 2011-08-01

Posts: 20

[SOLVED?] Problem with nVidia card

This is my first post, so; hello to everyone!! Thx in advance to this great community!!

My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.

This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.

The Xorg.0.log and dmesg.log files are atached at the end of this thread.

I hope that annyone can help me.
Thx in advance again.

The Xorg.0.log file contains this:

[    15.809] 
X.Org X Server 1.10.3
Release Date: 2011-07-08
[    15.814] X Protocol Version 11, Revision 0
[    15.814] Build Operating System: Linux 2.6.39-ARCH i686 
[    15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
[    15.815] Kernel command line: root=/dev/sda5 ro
[    15.815] Build Date: 09 July 2011  07:57:07AM
[    15.815]  
[    15.815] Current version of pixman: 0.22.2
[    15.815]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug  1 14:13:23 2011
[    15.829] (==) Using config file: "/etc/X11/xorg.conf"
[    15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.835] (==) ServerLayout "Layout0"
[    15.835] (**) |-->Screen "Screen0" (0)
[    15.835] (**) |   |-->Monitor "Monitor0"
[    15.836] (**) |   |-->Device "Device0"
[    15.836] (**) |-->Input Device "Keyboard0"
[    15.836] (**) |-->Input Device "Mouse0"
[    15.836] (==) Automatically adding devices
[    15.836] (==) Automatically enabling devices
[    15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    15.859]     Entry deleted from font path.
[    15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.859]     Entry deleted from font path.
[    15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    15.859]     Entry deleted from font path.
[    15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.859]     Entry deleted from font path.
[    15.859]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.859]     Entry deleted from font path.
[    15.859]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
[    15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.859] (**) Extension "Composite" is disabled
[    15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.859] (WW) Disabling Keyboard0
[    15.859] (WW) Disabling Mouse0
[    15.859] (II) Loader magic: 0x822e1a0
[    15.859] (II) Module ABI versions:
[    15.859]     X.Org ANSI C Emulation: 0.4
[    15.859]     X.Org Video Driver: 10.0
[    15.859]     X.Org XInput driver : 12.2
[    15.859]     X.Org Server Extension : 5.0
[    15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[    15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.860] (II) LoadModule: "extmod"
[    15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.880] (II) Module extmod: vendor="X.Org Foundation"
[    15.880]     compiled for 1.10.3, module version = 1.0.0
[    15.880]     Module class: X.Org Server Extension
[    15.880]     ABI class: X.Org Server Extension, version 5.0
[    15.880] (II) Loading extension MIT-SCREEN-SAVER
[    15.880] (II) Loading extension XFree86-VidModeExtension
[    15.880] (II) Loading extension XFree86-DGA
[    15.880] (II) Loading extension DPMS
[    15.880] (II) Loading extension XVideo
[    15.880] (II) Loading extension XVideo-MotionCompensation
[    15.880] (II) Loading extension X-Resource
[    15.880] (II) LoadModule: "dbe"
[    15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.881] (II) Module dbe: vendor="X.Org Foundation"
[    15.881]     compiled for 1.10.3, module version = 1.0.0
[    15.881]     Module class: X.Org Server Extension
[    15.881]     ABI class: X.Org Server Extension, version 5.0
[    15.881] (II) Loading extension DOUBLE-BUFFER
[    15.881] (II) LoadModule: "glx"
[    15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.640] (II) Module glx: vendor="NVIDIA Corporation"
[    16.640]     compiled for 4.0.2, module version = 1.0.0
[    16.640]     Module class: X.Org Server Extension
[    16.640] (II) NVIDIA GLX Module  275.21  Mon Jul 18 14:55:52 PDT 2011
[    16.640] (II) Loading extension GLX
[    16.640] (II) LoadModule: "record"
[    16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.645] (II) Module record: vendor="X.Org Foundation"
[    16.645]     compiled for 1.10.3, module version = 1.13.0
[    16.645]     Module class: X.Org Server Extension
[    16.645]     ABI class: X.Org Server Extension, version 5.0
[    16.645] (II) Loading extension RECORD
[    16.645] (II) LoadModule: "dri"
[    16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.661] (II) Module dri: vendor="X.Org Foundation"
[    16.661]     compiled for 1.10.3, module version = 1.0.0
[    16.661]     ABI class: X.Org Server Extension, version 5.0
[    16.661] (II) Loading extension XFree86-DRI
[    16.661] (II) LoadModule: "dri2"
[    16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.662] (II) Module dri2: vendor="X.Org Foundation"
[    16.662]     compiled for 1.10.3, module version = 1.2.0
[    16.662]     ABI class: X.Org Server Extension, version 5.0
[    16.662] (II) Loading extension DRI2
[    16.662] (II) LoadModule: "nvidia"
[    16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
[    16.709]     compiled for 4.0.2, module version = 1.0.0
[    16.709]     Module class: X.Org Video Driver
[    16.732] (II) NVIDIA dlloader X Driver  275.21  Mon Jul 18 14:38:30 PDT 2011
[    16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    16.740] (++) using VT number 7

[    16.751] (II) Loading sub module "fb"
[    16.751] (II) LoadModule: "fb"
[    16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.762] (II) Module fb: vendor="X.Org Foundation"
[    16.762]     compiled for 1.10.3, module version = 1.0.0
[    16.762]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.762] (II) Loading sub module "wfb"
[    16.762] (II) LoadModule: "wfb"
[    16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.769] (II) Module wfb: vendor="X.Org Foundation"
[    16.769]     compiled for 1.10.3, module version = 1.0.0
[    16.769]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.769] (II) Loading sub module "ramdac"
[    16.769] (II) LoadModule: "ramdac"
[    16.769] (II) Module "ramdac" already built-in
[    16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    16.780] (==) NVIDIA(0): RGB weight 888
[    16.780] (==) NVIDIA(0): Default visual is TrueColor
[    16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[    17.785] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
[    17.789] (--) NVIDIA(0): Memory: 262144 kBytes
[    17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
[    17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
[    17.789] (--) NVIDIA(0):     Samsung SyncMaster (CRT-0)
[    17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[    17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    17.859] (==) NVIDIA(0): 
[    17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    17.859] (==) NVIDIA(0):     will be used as the requested mode.
[    17.859] (==) NVIDIA(0): 
[    17.859] (II) NVIDIA(0): Validated modes:
[    17.859] (II) NVIDIA(0):     "nvidia-auto-select"
[    17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
[    17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
[    17.900] (--) NVIDIA(0):     option
[    17.900] (--) Depth 24 pixmap format is 32 bpp
[    17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    17.905] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    17.905] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    17.905] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    17.905] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    17.905] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    17.905] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    17.905] (II) NVIDIA(0):     Config Options in the README.
[    17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    17.946] (II) Loading extension NV-GLX
[    18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.002] (==) NVIDIA(0): Backing store disabled
[    18.002] (==) NVIDIA(0): Silken mouse enabled
[    18.002] (**) NVIDIA(0): DPMS enabled
[    18.002] (II) Loading extension NV-CONTROL
[    18.003] (II) Loading extension XINERAMA
[    18.003] (II) Loading sub module "dri2"
[    18.003] (II) LoadModule: "dri2"
[    18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.003] (II) Module dri2: vendor="X.Org Foundation"
[    18.003]     compiled for 1.10.3, module version = 1.2.0
[    18.003]     ABI class: X.Org Server Extension, version 5.0
[    18.003] (II) NVIDIA(0): [DRI2] Setup complete
[    18.003] (==) RandR enabled
[    18.003] (II) Initializing built-in extension Generic Event Extension
[    18.003] (II) Initializing built-in extension SHAPE
[    18.003] (II) Initializing built-in extension MIT-SHM
[    18.003] (II) Initializing built-in extension XInputExtension
[    18.003] (II) Initializing built-in extension XTEST
[    18.003] (II) Initializing built-in extension BIG-REQUESTS
[    18.003] (II) Initializing built-in extension SYNC
[    18.003] (II) Initializing built-in extension XKEYBOARD
[    18.003] (II) Initializing built-in extension XC-MISC
[    18.003] (II) Initializing built-in extension SECURITY
[    18.003] (II) Initializing built-in extension XINERAMA
[    18.003] (II) Initializing built-in extension XFIXES
[    18.003] (II) Initializing built-in extension RENDER
[    18.003] (II) Initializing built-in extension RANDR
[    18.003] (II) Initializing built-in extension COMPOSITE
[    18.003] (II) Initializing built-in extension DAMAGE
[    18.005] (II) Initializing extension GLX
[    18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.213] (II) LoadModule: "evdev"
[    18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.214] (II) Module evdev: vendor="X.Org Foundation"
[    18.214]     compiled for 1.10.0, module version = 2.6.0
[    18.214]     Module class: X.Org XInput Driver
[    18.214]     ABI class: X.Org XInput driver, version 12.2
[    18.214] (II) Using input driver 'evdev' for 'Power Button'
[    18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.214] (**) Power Button: always reports core events
[    18.214] (**) Power Button: Device: "/dev/input/event3"
[    18.226] (--) Power Button: Found keys
[    18.226] (II) Power Button: Configuring as keyboard
[    18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.226] (**) Option "xkb_rules" "evdev"
[    18.226] (**) Option "xkb_model" "evdev"
[    18.226] (**) Option "xkb_layout" "us"
[    18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.252] (II) Using input driver 'evdev' for 'Power Button'
[    18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.252] (**) Power Button: always reports core events
[    18.252] (**) Power Button: Device: "/dev/input/event2"
[    18.266] (--) Power Button: Found keys
[    18.266] (II) Power Button: Configuring as keyboard
[    18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.266] (**) Option "xkb_rules" "evdev"
[    18.266] (**) Option "xkb_model" "evdev"
[    18.266] (**) Option "xkb_layout" "us"
[    18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
[    18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
[    18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
[    18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.271] (**) Primax Electronics Wireless Mouse: always reports core events
[    18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
[    18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
[    18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
[    18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
[    18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
[    18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
[    18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
[    18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
[    18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
[    18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
[    18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
[    18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
[    18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
[    18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
[    18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
[    18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
[    18.283] (II) No input driver/identifier specified (ignoring)
[    18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    18.285] (II) No input driver/identifier specified (ignoring)
[    18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
[    18.285] (II) No input driver/identifier specified (ignoring)
[    18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.286] (**) AT Translated Set 2 keyboard: always reports core events
[    18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.300] (--) AT Translated Set 2 keyboard: Found keys
[    18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    18.300] (**) Option "xkb_rules" "evdev"
[    18.300] (**) Option "xkb_model" "evdev"
[    18.300] (**) Option "xkb_layout" "us"
[    18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    18.300] (II) No input driver/identifier specified (ignoring)
[  1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[  1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1563.587] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1563.587] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1563.587] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1563.587] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1563.587] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1563.587] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1563.587] (II) NVIDIA(0):     Config Options in the README.

And the dmesg.log file contains this:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-CFFFF uncachable
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f41f0] f41f0
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 7fdc9000 - 7ffe0000
[    0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
[    0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
[    0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
[    0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 7fff0000 00040
[    0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fff0
[    0.000000] On node 0 totalpages: 524159
[    0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2320 pages used for memmap
[    0.000000]   HighMem zone: 294626 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
[    0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520063
[    0.000000] Kernel command line: root=/dev/sda5 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8388096 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[    0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc14a8000 - 0xc1528000   ( 512 kB)
[    0.000000]       .data : 0xc134c3bf - 0xc14a7c00   (1390 kB)
[    0.000000]       .text : 0xc1000000 - 0xc134c3bf   (3376 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2700.236 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
[    0.016870] pid_max: default: 32768 minimum: 301
[    0.016983] Security Framework initialized
[    0.017051] AppArmor: AppArmor disabled by boot time parameter
[    0.017144] Mount-cache hash table entries: 512
[    0.017404] Initializing cgroup subsys ns
[    0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.017549] Initializing cgroup subsys cpuacct
[    0.017625] Initializing cgroup subsys memory
[    0.017701] Initializing cgroup subsys devices
[    0.017767] Initializing cgroup subsys freezer
[    0.017833] Initializing cgroup subsys net_cls
[    0.017899] Initializing cgroup subsys blkio
[    0.017995] CPU: Physical Processor ID: 0
[    0.018060] CPU: Processor Core ID: 0
[    0.018126] mce: CPU supports 5 MCE banks
[    0.018199] using C1E aware idle routine
[    0.019127] ACPI: Core revision 20110316
[    0.023362] ftrace: allocating 15225 entries in 30 pages
[    0.026734] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[    0.063329] Performance Events: AMD PMU driver.
[    0.063329] ... version:                0
[    0.063329] ... bit width:              48
[    0.063329] ... generic registers:      4
[    0.063329] ... value mask:             0000ffffffffffff
[    0.063329] ... max period:             00007fffffffffff
[    0.063329] ... fixed-purpose events:   0
[    0.063329] ... event mask:             000000000000000f
[    0.080086] NMI watchdog enabled, takes one hw-pmu counter.
[    0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
[    0.106676] Booting Node   0, Processors  #1
[    0.106783] smpboot cpu 1: start_ip = 9b000
[    0.019998] Initializing CPU#1
[    0.200085] NMI watchdog enabled, takes one hw-pmu counter.
[    0.206657] Brought up 2 CPUs
[    0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
[    0.207206] devtmpfs: initialized
[    0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
[    0.207649] print_constraints: dummy: 
[    0.207764] NET: Registered protocol family 16
[    0.207919] node 0 link 0: io port [c000, ffff]
[    0.207922] TOM: 0000000080000000 aka 2048M
[    0.207987] node 0 link 0: mmio [a0000, bffff]
[    0.207990] node 0 link 0: mmio [80000000, dfffffff]
[    0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.207995] node 0 link 0: mmio [e0000000, e03fffff]
[    0.207997] bus: [00, 03] on node 0 link 0
[    0.208000] bus: 00 index 0 [io  0x0000-0xffff]
[    0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
[    0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[    0.208011] ACPI: bus type pci registered
[    0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.208292] PCI: Using MMCONFIG for extended config space
[    0.208357] PCI: Using configuration type 1 for base access
[    0.208842] bio: create slab <bio-0> at 0
[    0.210574] ACPI: EC: Look up EC in DSDT
[    0.211181] ACPI: Executed 1 blocks of module-level executable AML code
[    0.214150] ACPI: Interpreter enabled
[    0.214220] ACPI: (supports S0 S3 S4 S5)
[    0.214501] ACPI: Using IOAPIC for interrupt routing
[    0.225790] ACPI: No dock devices found.
[    0.225854] HEST: Table not found.
[    0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.226190] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.226257] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[    0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[    0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[    0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.226639] pci 0000:00:02.0: PME# disabled
[    0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[    0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.226696] pci 0000:00:0a.0: PME# disabled
[    0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
[    0.226742] pci 0000:00:12.0: reg 10: [io  0xff00-0xff07]
[    0.226752] pci 0000:00:12.0: reg 14: [io  0xfe00-0xfe03]
[    0.226763] pci 0000:00:12.0: reg 18: [io  0xfd00-0xfd07]
[    0.226773] pci 0000:00:12.0: reg 1c: [io  0xfc00-0xfc03]
[    0.226784] pci 0000:00:12.0: reg 20: [io  0xfb00-0xfb0f]
[    0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[    0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[    0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[    0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[    0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[    0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[    0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[    0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[    0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[    0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[    0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[    0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[    0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[    0.227351] pci 0000:00:13.5: supports D1 D2
[    0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.227357] pci 0000:00:13.5: PME# disabled
[    0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.227402] pci 0000:00:14.0: reg 10: [io  0x0b00-0x0b0f]
[    0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[    0.227497] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.227507] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.227518] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.227528] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.227538] pci 0000:00:14.1: reg 20: [io  0xf900-0xf90f]
[    0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.227667] pci 0000:00:14.2: PME# disabled
[    0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[    0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
[    0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[    0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[    0.227945] pci 0000:01:00.0: reg 24: [io  0xdf00-0xdf7f]
[    0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.233396] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.233399] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.233404] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[    0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
[    0.233472] pci 0000:02:00.0: reg 18: [io  0xee00-0xeeff]
[    0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.233535] pci 0000:02:00.0: supports D1 D2
[    0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.233541] pci 0000:02:00.0: PME# disabled
[    0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.240062] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.240065] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.240069] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[    0.240203] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.240207] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.240212] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.240214] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.240217] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.240219] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.240221] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.240224] pci 0000:00:14.4:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[    0.240236] pci_bus 0000:00: on NUMA node 0
[    0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.240465]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
[    0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.258522] vgaarb: loaded
[    0.258678] PCI: Using ACPI for IRQ routing
[    0.258742] PCI: pci_cache_line_size set to 64 bytes
[    0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
[    0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff 
[    0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff 
[    0.259004] NetLabel: Initializing
[    0.259067] NetLabel:  domain hash size = 128
[    0.259131] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.259205] NetLabel:  unlabeled traffic allowed by default
[    0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.261015] Switching to clocksource hpet
[    0.261499] Switched to NOHz mode on CPU #0
[    0.261582] Switched to NOHz mode on CPU #1
[    0.266362] pnp: PnP ACPI init
[    0.266443] ACPI: bus type pnp registered
[    0.266593] pnp 00:00: [bus 00-ff]
[    0.266598] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.266600] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.266602] pnp 00:00: [io  0x0d00-0xffff window]
[    0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
[    0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.266792] pnp 00:01: [io  0x4100-0x411f]
[    0.266794] pnp 00:01: [io  0x0228-0x022f]
[    0.266796] pnp 00:01: [io  0x040b]
[    0.266798] pnp 00:01: [io  0x04d6]
[    0.266799] pnp 00:01: [io  0x0c00-0x0c01]
[    0.266801] pnp 00:01: [io  0x0c14]
[    0.266803] pnp 00:01: [io  0x0c50-0x0c52]
[    0.266805] pnp 00:01: [io  0x0c6c-0x0c6d]
[    0.266807] pnp 00:01: [io  0x0c6f]
[    0.266808] pnp 00:01: [io  0x0cd0-0x0cd1]
[    0.266810] pnp 00:01: [io  0x0cd2-0x0cd3]
[    0.266812] pnp 00:01: [io  0x0cd4-0x0cdf]
[    0.266814] pnp 00:01: [io  0x4000-0x40fe]
[    0.266815] pnp 00:01: [io  0x4210-0x4217]
[    0.266817] pnp 00:01: [io  0x0b10-0x0b1f]
[    0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
[    0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[    0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.267131] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.267198] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.267264] system 00:01: [io  0x040b] has been reserved
[    0.267330] system 00:01: [io  0x04d6] has been reserved
[    0.267395] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.267461] system 00:01: [io  0x0c14] has been reserved
[    0.267530] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.267596] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.267662] system 00:01: [io  0x0c6f] has been reserved
[    0.267727] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.267793] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.267859] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.267926] system 00:01: [io  0x4000-0x40fe] has been reserved
[    0.267992] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.268058] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268290] pnp 00:02: [dma 4]
[    0.268291] pnp 00:02: [io  0x0000-0x000f]
[    0.268293] pnp 00:02: [io  0x0080-0x0090]
[    0.268295] pnp 00:02: [io  0x0094-0x009f]
[    0.268297] pnp 00:02: [io  0x00c0-0x00df]
[    0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.268366] pnp 00:03: [irq 0 disabled]
[    0.268380] pnp 00:03: [irq 8]
[    0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.268430] pnp 00:04: [io  0x0070-0x0073]
[    0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.268463] pnp 00:05: [io  0x0061]
[    0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.268495] pnp 00:06: [io  0x00f0-0x00ff]
[    0.268504] pnp 00:06: [irq 13]
[    0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.268566] pnp 00:07: [io  0x0010-0x001f]
[    0.268567] pnp 00:07: [io  0x0022-0x003f]
[    0.268569] pnp 00:07: [io  0x0044-0x005f]
[    0.268571] pnp 00:07: [io  0x0062-0x0063]
[    0.268573] pnp 00:07: [io  0x0065-0x006f]
[    0.268575] pnp 00:07: [io  0x0074-0x007f]
[    0.268576] pnp 00:07: [io  0x0091-0x0093]
[    0.268578] pnp 00:07: [io  0x00a2-0x00bf]
[    0.268580] pnp 00:07: [io  0x00e0-0x00ef]
[    0.268582] pnp 00:07: [io  0x04d0-0x04d1]
[    0.268632] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.269033] pnp 00:08: [io  0x0060]
[    0.269034] pnp 00:08: [io  0x0064]
[    0.269043] pnp 00:08: [irq 1]
[    0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
[    0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
[    0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
[    0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
[    0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
[    0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
[    0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
[    0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[    0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[    0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.269930] pnp: PnP ACPI: found 10 devices
[    0.269994] ACPI: ACPI bus type pnp unregistered
[    0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[    0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.306311] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.306378] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.306445] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.306664] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.306741] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.306809] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.306952] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.307022] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.307090] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.307175] pci 0000:00:02.0: setting latency timer to 64
[    0.307180] pci 0000:00:0a.0: setting latency timer to 64
[    0.307188] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.307190] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.307199] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.307206] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.307213] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.307219] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.307222] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
[    0.307274] NET: Registered protocol family 2
[    0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.308652] TCP: Hash tables configured (established 131072 bind 65536)
[    0.308719] TCP reno registered
[    0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.309050] NET: Registered protocol family 1
[    0.426742] pci 0000:01:00.0: Boot video device
[    0.426749] PCI: CLS 64 bytes, default 64
[    0.426800] Unpacking initramfs...
[    0.460291] Freeing initrd memory: 2140k freed
[    0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[    0.461707] apm: disabled - APM is not SMP safe.
[    0.461884] audit: initializing netlink socket (disabled)
[    0.461957] type=2000 audit(1312207987.459:1): initialized
[    0.462290] highmem bounce pool size: 64 pages
[    0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.464180] VFS: Disk quotas dquot_6.5.2
[    0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.464469] msgmni has been set to 1712
[    0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.464841] io scheduler noop registered
[    0.464907] io scheduler deadline registered
[    0.464983] io scheduler cfq registered (default)
[    0.465152] pcieport 0000:00:02.0: setting latency timer to 64
[    0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
[    0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[    0.465393] ERST: Table is not found!
[    0.465467] isapnp: Scanning for PnP cards...
[    0.822554] isapnp: No Plug & Play device found
[    0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.050792] mousedev: PS/2 mouse device common for all mice
[    1.050892] rtc_cmos 00:04: RTC can wake from S4
[    1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.076954] cpuidle: using governor ladder
[    1.077018] cpuidle: using governor menu
[    1.077281] TCP cubic registered
[    1.077345] NET: Registered protocol family 17
[    1.077415] Registering the dns_resolver key type
[    1.077492] Using IPI No-Shortcut mode
[    1.077626] PM: Hibernation image not present or could not be loaded.
[    1.077633] registered taskstats version 1
[    1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
[    1.078086] Initializing network drop monitor service
[    1.078222] Freeing unused kernel memory: 512k freed
[    1.078587] Write protecting the kernel text: 3380k
[    1.078672] Write protecting the kernel read-only data: 1028k
[    1.088713] udevd[47]: starting version 171
[    1.180160] SCSI subsystem initialized
[    1.197209] usbcore: registered new interface driver usbfs
[    1.197412] usbcore: registered new interface driver hub
[    1.197625] usbcore: registered new device driver usb
[    1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    1.226842] ehci_hcd 0000:00:13.5: debug port 1
[    1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[    1.237087] libata version 3.00 loaded.
[    1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    1.240292] hub 1-0:1.0: USB hub found
[    1.240359] hub 1-0:1.0: 10 ports detected
[    1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.241613] scsi0 : pata_atiixp
[    1.241804] scsi1 : pata_atiixp
[    1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[    1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[    1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[    1.307508] hub 2-0:1.0: USB hub found
[    1.307579] hub 2-0:1.0: 2 ports detected
[    1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[    1.384201] hub 3-0:1.0: USB hub found
[    1.384274] hub 3-0:1.0: 2 ports detected
[    1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[    1.460849] hub 4-0:1.0: USB hub found
[    1.460923] hub 4-0:1.0: 2 ports detected
[    1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[    1.537463] hub 5-0:1.0: USB hub found
[    1.537533] hub 5-0:1.0: 2 ports detected
[    1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[    1.610820] hub 6-0:1.0: USB hub found
[    1.610890] hub 6-0:1.0: 2 ports detected
[    1.611025] ahci 0000:00:12.0: version 3.0
[    1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc 
[    1.612922] scsi2 : ahci
[    1.613831] scsi3 : ahci
[    1.614815] scsi4 : ahci
[    1.614997] scsi5 : ahci
[    1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    1.933384] ata6: SATA link down (SStatus 0 SControl 300)
[    1.933527] ata5: SATA link down (SStatus 0 SControl 300)
[    2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
[    2.106684] ata3: softreset failed (device not ready)
[    2.106751] ata3: applying SB600 PMP SRST workaround and retrying
[    2.106831] ata4: softreset failed (device not ready)
[    2.106897] ata4: applying SB600 PMP SRST workaround and retrying
[    2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[    2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
[    2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.279701] ata4.00: configured for UDMA/100
[    2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.284533] ata3.00: configured for UDMA/133
[    2.284747] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD161HJ  JF10 PQ: 0 ANSI: 5
[    2.397145] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH20NS10  EL00 PQ: 0 ANSI: 5
[    2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.407755] sd 2:0:0:0: [sda] Write Protect is off
[    2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
[    2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
[    2.411669] usbcore: registered new interface driver usbhid
[    2.411745] usbhid: USB HID core driver
[    2.437927]  sda: sda1 sda2 sda3 < sda5 >
[    2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.003984] udevd[255]: starting version 171
[    4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    4.140858] ACPI: Power Button [PWRB]
[    4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.141058] ACPI: Power Button [PWRF]
[    4.154881] Linux agpgart interface v0.103
[    4.157785] ACPI: Fan [FAN] (on)
[    4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    4.161972] ACPI: acpi_idle registered with cpuidle
[    4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[    4.228336] sky2: driver version 1.28
[    4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.228527] sky2 0000:02:00.0: setting latency timer to 64
[    4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
[    4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[    4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
[    4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
[    4.356967] ACPI: Expecting a [Reference] package element, found type 0
[    4.357033] ACPI: Invalid passive threshold
[    4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    4.476288] nvidia: module license 'NVIDIA' taints kernel.
[    4.476360] Disabling lock debugging due to kernel taint
[    4.556743] thermal LNXTHERM:00: registered as thermal_zone0
[    4.556813] ACPI: Thermal Zone [THRM] (44 C)
[    4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.775620] hda_codec: ALC888: BIOS auto-probing.
[    4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[    4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.638769] nvidia 0000:01:00.0: setting latency timer to 64
[    5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module  275.21  Mon Jul 18 14:37:03 PDT 2011
[    5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
[    5.965890] Adding 996024k swap on /dev/sda2.  Priority:-1 extents:1 across:996024k

Last edited by Fuentes (2011-08-16 22:44:13)

karol

Archivist

Registered: 2009-05-06

Posts: 25,440

Re: [SOLVED?] Problem with nVidia card

Please edit your post and wrap the code output in [ code ] tags

like this

all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.

I don't quite get what you mean, a screenshot or photo would be helpful.

Last edited by karol (2011-08-01 20:26:58)

George

Member

Registered: 2011-05-11

Posts: 165

Re: [SOLVED?] Problem with nVidia card

Try pressing Alt+Shift+F12 to disable kwin compositing as this can be a problem on some nvidia cards.

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

karol: Its very simple, all screen is black, except for the mouse pointer and a little rectangle in the upper left corner with graphic garbage on it.

George: Compositing is disabled in 2 places: kwinrc and xorg.conf. Pressing alt+shift+f12 does nothing.

Salute.

Mr.Elendig

#archlinux@freenode channel op

From: The intertubes

Registered: 2004-11-07

Posts: 4,092

Re: [SOLVED?] Problem with nVidia card

Is your monitor a lcd one? If it is, switch to dvi if you can.
If not, is this a really old crt? 800x600 is a rather small res...

---

Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest

mkkot

Member

From: Poland

Registered: 2009-12-20

Posts: 287

Re: [SOLVED?] Problem with nVidia card

Try this at first:
https://wiki.archlinux.org/index.php/KD … sh_loading
Show ~/.xsession-errors

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

Is your monitor a lcd one? If it is, switch to dvi if you can.
If not, is this a really old crt? 800x600 is a rather small res...

The monitor is CRT, but i have an LCD with VGA port only. I'll try change the screen and see what happend.

Try this at first:
https://wiki.archlinux.org/index.php/KD … sh_loading
Show ~/.xsession-errors

As i say in another post, the composite is disabled in 2 configuration files: "/home/user/.kde4/share/config/kwinrc" and "/etc/xorg.conf". I'll check the "~/.xsession-errors" file and write its contents as soon is posible.

Salute.

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

the contents of /home/user/.xsession-errors

startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5 
kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed 
Object::connect: No such signal QDBusAbstractInterface::Changed()
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e00141
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0x8bf31cc
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e00141
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e00143
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e00143
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e00145
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e00145
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e00147
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e00147
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e00149
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e00149
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e0014b
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e0014b
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e0014d
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e0014d
X Error: BadValue (integer parameter out of range for operation) 2
  Major opcode: 53 (X_CreatePixmap)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 14 (X_GetGeometry)
  Resource id:  0x1e0014f
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 3 (X_GetWindowAttributes)
  Resource id:  0xb6d1bef4
QPainter::begin: Cannot paint on a null pixmap
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Extension:    152 (RENDER)
  Minor opcode: 4 (RenderCreatePicture)
  Resource id:  0x1e0014f
Object::connect: No such signal QDBusAbstractInterface::Changed()
Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
kwin(977): Compositing is not possible 
kwin(977): Compositing is not possible 
kwin(977): Compositing is not possible 
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed 
kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed 
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed 
kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed 
QProcess: Destroyed while process is still running.
plasma-desktop(1001): Communication problem with  "plasma-desktop" , it probably crashed. 
Error message was:  "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" " 

kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
ksmserver: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kded4: Fatal IO error: client killed
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.

mkkot

Member

From: Poland

Registered: 2009-12-20

Posts: 287

Re: [SOLVED?] Problem with nVidia card

No idea. They say in suse forum (http://forums.opensuse.org/english/get- … gging.html) to try booting in failsafe mode.

George

Member

Registered: 2011-05-11

Posts: 165

Re: [SOLVED?] Problem with nVidia card

mkkot; for that to be of any use to an Arch system you'd need to know what SUSE disables in failsafe mode, I'd guess the relevent part would be if they use vesa xorg drivers insead of nvidia ones.

Fuentes; have you tried your system with the nouveau driver insead of nvidia?

mkkot

Member

From: Poland

Registered: 2009-12-20

Posts: 287

Re: [SOLVED?] Problem with nVidia card

@George It's worth to try anyway. And the answer on nouveau question is located in Fuentes' first post :>

George

Member

Registered: 2011-05-11

Posts: 165

Re: [SOLVED?] Problem with nVidia card

mkkot;
Ah yes, I came back to this thread after a leaving it for a while and didn't re-read it completely...

Anyway I'd be inclined to try booting a live cd of a different distro which ships KDE 4.7 (say a kubuntu daily build) and see if that also has that problem.
Also since this fails after KDM how about trying a new user to see if its a config problem.

davidlone

Member

From: China

Registered: 2007-09-06

Posts: 6

Re: [SOLVED?] Problem with nVidia card

Same problem here with kde 4.7 newly installed,rm -rf .kde4 doesn't help.
But if I get the previous .kde4 back(kde4.6),everything seems fine.

Today I tried it again,last time i just installed kdebase,today I installed kde completely,then everything works fine.

Last edited by davidlone (2011-08-05 10:30:48)

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

Same problem here with kde 4.7 newly installed,rm -rf .kde4 doesn't help.
But if I get the previous .kde4 back(kde4.6),everything seems fine.

Today I tried it again,last time i just installed kdebase,today I installed kde completely,then everything works fine.

Very interesting. I'll try install whole KDE this time... It seems an Arch bug rather than KDE, is it???

Very thx to all of you!!

Last edited by Fuentes (2011-08-06 09:53:02)

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

today i tried the Kubuntu live CD, and all run like a charm!! Now I'll try the complete installation of KDE in Arch. If this works, the only explanation is an Arch bug, is it??

Salute.

George

Member

Registered: 2011-05-11

Posts: 165

Re: [SOLVED?] Problem with nVidia card

Perhaps, it may also be due to bugs that have appeared in later releases than the (k)ubuntu version you tried ships.

Fuentes

Member

Registered: 2011-08-01

Posts: 20

Re: [SOLVED?] Problem with nVidia card

Perhaps, it may also be due to bugs that have appeared in later releases than the (k)ubuntu version you tried ships.

I don't think so, because today i installed whole KDE (pacman -S kde) and all works like a charm!!. OTOH if i try install the minimal KDE, the graphic driver don't work... why??
It seems an Arch bug, is it??

Salute.

George

Member

Registered: 2011-05-11

Posts: 165

Re: [SOLVED?] Problem with nVidia card

Maybe a packaging bug, but it could also be upstream bug if they have undocumented dependancies...