You are not logged in.

#1 2011-08-13 08:48:24

Johnyjohn
Member
Registered: 2011-08-13
Posts: 5

Kdenlive can't start

Hello every one.

When trying to launch the latest available version of kdenlive in pacman (0.8svn20110722-1) i have the following result :

project monitor connected 
clip monitor connected 
detected format: YUV 4:2:2 (YUYV): YUYV
Size: 640x480: 1/30, 
Size: 352x288: 1/30, 
Size: 320x240: 1/30, 
Size: 176x144: 1/30, 
Size: 160x120: 1/30, 
Size: 800x600: 1/5, 
Size: 1024x768: 1/5, 
Size: 1280x1024: 1/5, 
detected format: MJPEG: MJPG
Size: 640x480: 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30,

It doesn't crash but it's stucked in this state, using almost all my CPU ressource.
Only solution is to Ctrl+c to stop the program.

I tried to change theme or icone theme like suggested in this post but it doesn't work :
https://bbs.archlinux.org/viewtopic.php?id=113768

I found a bug description really similar to my problem :
https://bugs.archlinux.org/task/25429

It's different because i don't have the crash info :

KCrash: Application 'kdenlive' crashing...

I d'ont have a "~/.drirc" to delete.
I also tried to create a new user but launching kdenlive reacts the same way.

If it's a window manager or desktop environement problem, it may be because i'm using Xmonad but i didn't find any related suggestion.

Thank you for any answer.

Offline

#2 2011-08-13 18:15:03

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: Kdenlive can't start

My kdenlive does not start after upgrade to 3.0 with an error message ....MLT SDL module not found....


Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#3 2011-08-14 09:18:30

Johnyjohn
Member
Registered: 2011-08-13
Posts: 5

Re: Kdenlive can't start

Many posts and bugs are about MLT version problem with kdenlive.
Try to get the latest or to downgrade MLT got get this work.

But it doesn't seem to be related to my problem, according to the start error message.
Any idea ?

Offline

#4 2011-08-24 07:20:28

idovitz
Member
Registered: 2011-08-24
Posts: 7

Re: Kdenlive can't start

Hi all, after 5 lazy years ubuntu i'm back to arch linux wink

I have exactly the same problem and output as johnyjohn but kdenlive crashes at startup:

~]$ kdenlive
project monitor connected 
clip monitor connected 
detected format: YUV 4:2:2 (YUYV): YUYV
Size: 640x480: 1/30, 
Size: 320x240: 1/30, 
Size: 800x600: 2/15, 
Size: 1024x600: 2/15, 
Size: 1024x768: 2/15, 
Size: 1280x800: 2/15, 
Size: 1280x1024: 2/15, 
detected format: MJPEG: MJPG
Size: 640x480: 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 1/30, 
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/ido/.kde4/socket-yws1928/kdeinit4__0
drkonqi(8078): Unable to find an internal debugger that can work with the KCrash backend

Offline

#5 2011-08-24 07:41:53

idovitz
Member
Registered: 2011-08-24
Posts: 7

Re: Kdenlive can't start

Also tested with kernel26-lts, same error.

(intel x86_64, ATI Technologies Inc Mobility Radeon HD 3650)

Offline

#6 2013-01-24 04:06:25

Sidus
Member
Registered: 2013-01-24
Posts: 1

Re: Kdenlive can't start

Same problem here, Kdenlive won't start.

uname -a

Linux *** 3.7.3-1-ARCH #1 SMP PREEMPT Thu Jan 17 18:52:30 CET 2013 x86_64 GNU/Linux

kdenlive --version

Qt: 4.8.4
KDE Development Platform: 4.9.98
Kdenlive: 0.9.3 (rev. v0.9.2-415-g91ea035)

melt -version

melt 0.8.8

kdenlive

QCoreApplication::postEvent: Unexpected null receiver

PS. Same result for non-git version in community repo.

Alternatively i tried 'Openshot', 'PiTiVi' and 'VLMC', but any of these seems very unstable and crashes most of the times for simple routine actions like 'saving a project' or generally 'importing media files' into the editor.

Last edited by Sidus (2013-01-24 04:12:38)

Offline

Board footer

Powered by FluxBB