You are not logged in.
Pages: 1
Hi I have a problem. I wanna use my TV as a monitor. But when I connect it most part of the TV shows the laptop screen. But I can also see three "other backgrounds"
Heres a picture: http://data.fuskbugg.se/skalman02/4e490 … 4_scrn.jpg
I have Intel card and I've tried
xrandr --auto, I've tried scaling it. But nothing works...
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
EDID:
00ffffffffffff004c2dc50701000000
2e140103806639780aee91a3544c9926
0f5054bdef80714f8100814081809500
950fb300a940023a801871382d40582c
4500a05a0000001e662150b051001b30
40703600a05a0000001e000000fd0018
4b1a5117000a202020202020000000fc
0053414d53554e470a20202020200144
020332f14b901f041305140312202122
2309070783010000e2000fe305030172
030c004000b82d20d0080140073f4050
90a0023a80d072382d40102c4580a05a
0000001e011d00bc52d01e20b8285540
a05a0000001e011d80d0721c1620102c
2580a05a0000009e0000000000000000
00000000000000000000000000000088
Broadcast RGB: Full
supported: Full Limited 16:2
force_audio: 0 (0x00000000) range: (-1,1)
1920x1080 60.0*+ 50.0
1600x1200 60.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1360x768 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
Broadcast RGB: Full
supported: Full Limited 16:2
force_audio: 0 (0x00000000) range: (-1,1)
Any ideas?
Thanks!
Offline
It seems like "auto" doesn't work.
Have you tried to set the resolution manually with xrandr?
xrandr --output HDMI1 --mode 1920x1080
Offline
Pages: 1