You are not logged in.

#1 2011-08-14 05:49:14

TheImmortalPhoenix
Member
From: 127.0.0.1
Registered: 2011-08-13
Posts: 436

My Arch is very slow after upgrading to kernel 3.0

Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)...  I would like you to help me to solve a problem: as i wrote in object  my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

Offline

#2 2011-08-14 15:53:53

Archadept
Member
Registered: 2010-07-30
Posts: 11

Re: My Arch is very slow after upgrading to kernel 3.0

I am using this kernel for a while and it works just fine. However if you are sure that this is the cause of hiccup of your system then:

  1. Update /etc/rc.conf and /etc/mkinitcpio.conf if you didnt do this already. Preserve your configuration settings. Backup old config files first! Generate new initial ramdisk with mkinitcpio.

  2. If this fails switch to another kernel version - kernel26-lts.

  3. If this fails too and you expect help be more verbose. Provide as many details on the nature of a problem as you can.

Offline

#3 2011-08-14 18:18:40

darkbeanies
Member
Registered: 2009-01-14
Posts: 142

Re: My Arch is very slow after upgrading to kernel 3.0

How strange.  My system was so fast in every respect after upgrading to 3.0 kernel that I thought something must be broken somewhere...

Offline

#4 2011-08-16 18:51:57

Diaz
Member
From: Portugal
Registered: 2008-04-16
Posts: 366

Re: My Arch is very slow after upgrading to kernel 3.0

I don't know, but it could be some regression on the kernel or a problem in drivers... What kind of hardware do you have? And how exactly is it slow, booting or even while using the pc?

Offline

#5 2011-08-16 21:45:51

TheImmortalPhoenix
Member
From: 127.0.0.1
Registered: 2011-08-13
Posts: 436

Re: My Arch is very slow after upgrading to kernel 3.0

it's slow on the startup and when i open windows for the first time...after a while it seems to go better...

Offline

#6 2011-08-17 10:03:43

Giselher
Member
From: Austria
Registered: 2010-02-02
Posts: 150
Website

Re: My Arch is very slow after upgrading to kernel 3.0

Just check if the hostname in your /etc/hosts matches with the hostname in your rc.conf.
https://wiki.archlinux.org/index.php/FA … _at_all.21

Offline

#7 2011-08-17 10:09:23

TheImmortalPhoenix
Member
From: 127.0.0.1
Registered: 2011-08-13
Posts: 436

Re: My Arch is very slow after upgrading to kernel 3.0

I've already checked and they match...now i'm trying with kernel26-lts....how can i replace 3.0 whit lts?

Last edited by TheImmortalPhoenix (2011-08-17 13:10:45)

Offline

#8 2011-08-17 10:28:47

Giselher
Member
From: Austria
Registered: 2010-02-02
Posts: 150
Website

Re: My Arch is very slow after upgrading to kernel 3.0

if it really isn't /etc/hosts than you can install kernel26-lts with

pacman -Suy kernel26-lts

Offline

#9 2011-08-17 12:04:06

Sean-Der
Member
Registered: 2007-09-30
Posts: 88

Re: My Arch is very slow after upgrading to kernel 3.0

Take a look through dmesg see if there is anything segfaulting or any errors that could be related to your issue?

Offline

#10 2011-08-17 13:12:21

TheImmortalPhoenix
Member
From: 127.0.0.1
Registered: 2011-08-13
Posts: 436

Re: My Arch is very slow after upgrading to kernel 3.0

However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg

EDIT: I've checked but no error is shown....this is dmesg.log:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
[    0.000000]  BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
[    0.000000]  BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
[    0.000000]  BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
[    0.000000]  BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
[    0.000000]  BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
[    0.000000]  BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
[    0.000000]  BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 118000000 mask FF8000000 uncachable
[    0.000000]   5 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fc980] fc980
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
[    0.000000]  0000000000 - 00dee00000 page 2M
[    0.000000]  00dee00000 - 00dee74000 page 4k
[    0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
[    0.000000] init_memory_mapping: 0000000100000000-0000000118000000
[    0.000000]  0100000000 - 0118000000 page 2M
[    0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
[    0.000000] RAMDISK: 37c76000 - 37e33000
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v02   Sony)
[    0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01   Sony     VAIO 20100720 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000def15d98 000F4 (v04   Sony     VAIO 20100720 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01   Sony     VAIO 20100720 INTL 20051117)
[    0.000000] ACPI: FACS 00000000def2df40 00040
[    0.000000] ACPI: APIC 00000000def1bf18 0008C (v02   Sony     VAIO 20100720 MSFT 00010013)
[    0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01   Sony     VAIO 20100720 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000def2fc98 00038 (v01   Sony     VAIO 20100720 MSFT 00000003)
[    0.000000] ACPI: SLIC 00000000def28a18 00176 (v01   Sony     VAIO 20100720 Sony 01000000)
[    0.000000] ACPI: SSDT 00000000def16018 009F1 (v01   Sony     VAIO 20100720 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000def15c18 0014B (v01   Sony     VAIO 20100720 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000118000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000118000000
[    0.000000]   NODE_DATA [0000000117ffb000 - 0000000117ffffff]
[    0.000000]  [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00118000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000dee74
[    0.000000]     0: 0x00100000 -> 0x00118000
[    0.000000] On node 0 totalpages: 1011202
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 894636 pages, LIFO batch:31
[    0.000000]   Normal zone: 1344 pages used for memmap
[    0.000000]   Normal zone: 96960 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
[    0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
[    0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
[    0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
[    0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
[    0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
[    0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
[    0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
[    0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
[    0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
[    0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
[    0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
[    0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
[    0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
[    0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995517
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 32505856 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] spurious 8259A interrupt: IRQ7.
[    0.003333] Detected 2127.784 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000120] Security Framework initialized
[    0.000125] AppArmor: AppArmor disabled by boot time parameter
[    0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001968] Mount-cache hash table entries: 256
[    0.002354] Initializing cgroup subsys cpuacct
[    0.002387] Initializing cgroup subsys memory
[    0.002403] Initializing cgroup subsys devices
[    0.002406] Initializing cgroup subsys freezer
[    0.002408] Initializing cgroup subsys net_cls
[    0.002410] Initializing cgroup subsys blkio
[    0.002461] CPU: Physical Processor ID: 0
[    0.002462] CPU: Processor Core ID: 0
[    0.002468] mce: CPU supports 9 MCE banks
[    0.002478] CPU0: Thermal monitoring handled by SMI
[    0.002487] using mwait in idle threads.
[    0.003640] ACPI: Core revision 20110413
[    0.019108] ftrace: allocating 16144 entries in 64 pages
[    0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.058531] CPU0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz stepping 02
[    0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.163161] ... version:                3
[    0.163162] ... bit width:              48
[    0.163164] ... generic registers:      4
[    0.163165] ... value mask:             0000ffffffffffff
[    0.163167] ... max period:             000000007fffffff
[    0.163168] ... fixed-purpose events:   3
[    0.163169] ... event mask:             000000070000000f
[    0.183294] NMI watchdog enabled, takes one hw-pmu counter.
[    0.209823] Booting Node   0, Processors  #1
[    0.209829] smpboot cpu 1: start_ip = 99000
[    0.303122] CPU1: Thermal monitoring handled by SMI
[    0.323240] NMI watchdog enabled, takes one hw-pmu counter.
[    0.343129]  #2
[    0.343133] smpboot cpu 2: start_ip = 99000
[    0.436405] CPU2: Thermal monitoring handled by SMI
[    0.456532] NMI watchdog enabled, takes one hw-pmu counter.
[    0.476405]  #3
[    0.476409] smpboot cpu 3: start_ip = 99000
[    0.569682] CPU3: Thermal monitoring handled by SMI
[    0.589820] NMI watchdog enabled, takes one hw-pmu counter.
[    0.596326] Brought up 4 CPUs
[    0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
[    0.598893] devtmpfs: initialized
[    0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
[    0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
[    0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
[    0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
[    0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
[    0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
[    0.600970] print_constraints: dummy: 
[    0.601050] NET: Registered protocol family 16
[    0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.601159] ACPI: bus type pci registered
[    0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.613921] PCI: Using configuration type 1 for base access
[    0.614412] bio: create slab <bio-0> at 0
[    0.616187] ACPI: EC: Look up EC in DSDT
[    0.626457] ACPI: Executed 2 blocks of module-level executable AML code
[    0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.647118] ACPI: Dynamic OEM Table Load:
[    0.647121] ACPI: SSDT           (null) 003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.647269] ACPI: SSDT 00000000def18018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.647646] ACPI: Dynamic OEM Table Load:
[    0.647648] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.666577] ACPI: SSDT 00000000def19a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.667016] ACPI: Dynamic OEM Table Load:
[    0.667018] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.676431] ACPI: SSDT 00000000def17d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.676844] ACPI: Dynamic OEM Table Load:
[    0.676846] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.089727] ACPI: Interpreter enabled
[    1.089731] ACPI: (supports S0 S3 S4 S5)
[    1.089754] ACPI: Using IOAPIC for interrupt routing
[    1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.120814] ACPI: No dock devices found.
[    1.120815] HEST: Table not found.
[    1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.121147] \_SB_.PCI0:_OSC invalid UUID
[    1.121149] _OSC request data:1 8 1f 
[    1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.121658] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.121661] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[    1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.121761] pci 0000:00:01.0: PME# disabled
[    1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
[    1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.121927] pci 0000:00:16.0: PME# disabled
[    1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
[    1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.122088] pci 0000:00:1a.0: PME# disabled
[    1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
[    1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.122223] pci 0000:00:1b.0: PME# disabled
[    1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.122337] pci 0000:00:1c.0: PME# disabled
[    1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.122451] pci 0000:00:1c.1: PME# disabled
[    1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.122565] pci 0000:00:1c.2: PME# disabled
[    1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.122686] pci 0000:00:1c.5: PME# disabled
[    1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
[    1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.122844] pci 0000:00:1d.0: PME# disabled
[    1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.123103] pci 0000:00:1f.2: reg 10: [io  0xe070-0xe077]
[    1.123114] pci 0000:00:1f.2: reg 14: [io  0xe060-0xe063]
[    1.123126] pci 0000:00:1f.2: reg 18: [io  0xe050-0xe057]
[    1.123137] pci 0000:00:1f.2: reg 1c: [io  0xe040-0xe043]
[    1.123149] pci 0000:00:1f.2: reg 20: [io  0xe020-0xe03f]
[    1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
[    1.123209] pci 0000:00:1f.2: PME# supported from D3hot
[    1.123214] pci 0000:00:1f.2: PME# disabled
[    1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
[    1.123290] pci 0000:00:1f.3: reg 20: [io  0xe000-0xe01f]
[    1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[    1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
[    1.123405] pci 0000:01:00.0: reg 20: [io  0xd000-0xd0ff]
[    1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
[    1.123443] pci 0000:01:00.0: supports D1 D2
[    1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[    1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
[    1.123555] pci 0000:01:00.1: supports D1 D2
[    1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.123582] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.123585] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    1.123589] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[    1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
[    1.123783] pci 0000:02:00.0: supports D1
[    1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.123790] pci 0000:02:00.0: PME# disabled
[    1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.123829] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.123834] pci 0000:00:1c.0:   bridge window [mem 0xf4a00000-0xf5dfffff]
[    1.123842] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
[    1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
[    1.124115] pci 0000:03:00.0: supports D1 D2
[    1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.124123] pci 0000:03:00.0: PME# disabled
[    1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
[    1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
[    1.124336] pci 0000:03:00.1: supports D1 D2
[    1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.124344] pci 0000:03:00.1: PME# disabled
[    1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
[    1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
[    1.124554] pci 0000:03:00.4: supports D1 D2
[    1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[    1.124562] pci 0000:03:00.4: PME# disabled
[    1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.124635] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    1.124640] pci 0000:00:1c.1:   bridge window [mem 0xf3600000-0xf49fffff]
[    1.124648] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
[    1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
[    1.125212] pci 0000:04:00.0: reg 18: [io  0xa000-0xa0ff]
[    1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
[    1.125967] pci 0000:04:00.0: supports D1 D2
[    1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.126008] pci 0000:04:00.0: PME# disabled
[    1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.126274] pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
[    1.126279] pci 0000:00:1c.2:   bridge window [mem 0xf2200000-0xf35fffff]
[    1.126287] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[    1.126348] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    1.126353] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf21fffff]
[    1.126361] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
[    1.126443] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.126448] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.126456] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.126459] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.126461] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.126463] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.126466] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    1.126468] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.126470] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.126473] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    1.126475] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.126478] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    1.126480] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    1.126997] \_SB_.PCI0:_OSC invalid UUID
[    1.126998] _OSC request data:1 1f 1f 
[    1.127003]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.127035] \_SB_.PCI0:_OSC invalid UUID
[    1.127037] _OSC request data:1 0 1d 
[    1.127041]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[    1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[    1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[    1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[    1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[    1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[    1.131176]  pci0000:3f: Requesting ACPI _OSC control (0x1d)
[    1.131179]  pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[    1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.131826] vgaarb: loaded
[    1.131827] vgaarb: bridge control possible 0000:01:00.0
[    1.131900] PCI: Using ACPI for IRQ routing
[    1.134142] PCI: pci_cache_line_size set to 64 bytes
[    1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff 
[    1.134372] NetLabel: Initializing
[    1.134374] NetLabel:  domain hash size = 128
[    1.134375] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.134389] NetLabel:  unlabeled traffic allowed by default
[    1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.136441] Switching to clocksource hpet
[    1.139456] Switched to NOHz mode on CPU #0
[    1.139583] Switched to NOHz mode on CPU #1
[    1.139590] Switched to NOHz mode on CPU #2
[    1.139598] Switched to NOHz mode on CPU #3
[    1.142357] pnp: PnP ACPI init
[    1.142375] ACPI: bus type pnp registered
[    1.142679] pnp 00:00: [bus 00-3e]
[    1.142682] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.142684] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.142686] pnp 00:00: [io  0x0d00-0xffff window]
[    1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[    1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.142841] pnp 00:01: [io  0x0000-0x001f]
[    1.142843] pnp 00:01: [io  0x0081-0x0091]
[    1.142844] pnp 00:01: [io  0x0093-0x009f]
[    1.142846] pnp 00:01: [io  0x00c0-0x00df]
[    1.142848] pnp 00:01: [dma 4]
[    1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.143008] pnp 00:04: [io  0x00f0]
[    1.143019] pnp 00:04: [irq 13]
[    1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.143054] pnp 00:05: [io  0x002e-0x002f]
[    1.143056] pnp 00:05: [io  0x004e-0x004f]
[    1.143057] pnp 00:05: [io  0x0061]
[    1.143059] pnp 00:05: [io  0x0063]
[    1.143061] pnp 00:05: [io  0x0065]
[    1.143062] pnp 00:05: [io  0x0067]
[    1.143064] pnp 00:05: [io  0x0070]
[    1.143065] pnp 00:05: [io  0x0080]
[    1.143066] pnp 00:05: [io  0x0092]
[    1.143068] pnp 00:05: [io  0x00b2-0x00b3]
[    1.143070] pnp 00:05: [io  0x0680-0x069f]
[    1.143072] pnp 00:05: [io  0xff00-0xff0f]
[    1.143073] pnp 00:05: [io  0xff10-0xff13]
[    1.143075] pnp 00:05: [io  0x0800-0x0803]
[    1.143076] pnp 00:05: [io  0x0400-0x047f]
[    1.143078] pnp 00:05: [io  0x0500-0x057f]
[    1.143080] pnp 00:05: [io  0x164e-0x164f]
[    1.143140] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.143143] system 00:05: [io  0xff00-0xff0f] has been reserved
[    1.143145] system 00:05: [io  0xff10-0xff13] has been reserved
[    1.143148] system 00:05: [io  0x0800-0x0803] has been reserved
[    1.143150] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.143152] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.143154] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.143166] pnp 00:06: [io  0x0070-0x0077]
[    1.143171] pnp 00:06: [irq 8]
[    1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.143218] pnp 00:07: [io  0x0060]
[    1.143220] pnp 00:07: [io  0x0064]
[    1.143225] pnp 00:07: [irq 1]
[    1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.143262] pnp 00:08: [irq 12]
[    1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[    1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[    1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
[    1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
[    1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.143900] pnp 00:0a: [bus 3f]
[    1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.157077] pnp: PnP ACPI: found 11 devices
[    1.157079] ACPI: ACPI bus type pnp unregistered
[    1.163064] PCI: max bus depth: 1 pci_try_num: 2
[    1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
[    1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
[    1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
[    1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
[    1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.163146] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.163149] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf00fffff]
[    1.163152] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.163159] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.163166] pci 0000:00:1c.0:   bridge window [mem 0xf4a00000-0xf5dfffff]
[    1.163171] pci 0000:00:1c.0:   bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
[    1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.163195] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    1.163202] pci 0000:00:1c.1:   bridge window [mem 0xf3600000-0xf49fffff]
[    1.163207] pci 0000:00:1c.1:   bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
[    1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.163219] pci 0000:00:1c.2:   bridge window [io  0xa000-0xafff]
[    1.163225] pci 0000:00:1c.2:   bridge window [mem 0xf2200000-0xf35fffff]
[    1.163230] pci 0000:00:1c.2:   bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
[    1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[    1.163242] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    1.163248] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf21fffff]
[    1.163253] pci 0000:00:1c.5:   bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
[    1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[    1.163263] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.163269] pci 0000:00:1e.0:   bridge window [mem disabled]
[    1.163274] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.163296] pci 0000:00:01.0: setting latency timer to 64
[    1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.163308] pci 0000:00:1c.0: setting latency timer to 64
[    1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.163323] pci 0000:00:1c.1: setting latency timer to 64
[    1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.163338] pci 0000:00:1c.2: setting latency timer to 64
[    1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.163350] pci 0000:00:1c.5: setting latency timer to 64
[    1.163359] pci 0000:00:1e.0: setting latency timer to 64
[    1.163363] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.163366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[    1.163385] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
[    1.163389] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
[    1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
[    1.163396] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
[    1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
[    1.163403] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
[    1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
[    1.163409] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
[    1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
[    1.163416] pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
[    1.163418] pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
[    1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[    1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
[    1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
[    1.163511] NET: Registered protocol family 2
[    1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.168014] TCP: Hash tables configured (established 524288 bind 65536)
[    1.168016] TCP reno registered
[    1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.168344] NET: Registered protocol family 1
[    2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    3.832352] pci 0000:01:00.0: Boot video device
[    3.832384] PCI: CLS 64 bytes, default 64
[    3.832433] Unpacking initramfs...
[    3.861003] Freeing initrd memory: 1780k freed
[    3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
[    3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
[    3.861787] audit: initializing netlink socket (disabled)
[    3.861799] type=2000 audit(1313594250.696:1): initialized
[    3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.886559] VFS: Disk quotas dquot_6.5.2
[    3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.886869] msgmni has been set to 7638
[    3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.887147] io scheduler noop registered
[    3.887150] io scheduler deadline registered
[    3.887202] io scheduler cfq registered (default)
[    3.887320] pcieport 0000:00:01.0: setting latency timer to 64
[    3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
[    3.887674] vesafb: scrolling: redraw
[    3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
[    4.087472] Console: switching to colour frame buffer device 200x56
[    4.281840] fb0: VESA VGA frame buffer device
[    4.281854] intel_idle: MWAIT substates: 0x1120
[    4.281856] intel_idle: v0.4 model 0x25
[    4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.281902] ERST: Table is not found!
[    4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.469026] Linux agpgart interface v0.103
[    4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.473591] mousedev: PS/2 mouse device common for all mice
[    4.473653] rtc_cmos 00:06: RTC can wake from S4
[    4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    4.473886] cpuidle: using governor ladder
[    4.474031] cpuidle: using governor menu
[    4.474245] TCP cubic registered
[    4.474248] NET: Registered protocol family 17
[    4.474257] Registering the dns_resolver key type
[    4.474353] PM: Checking hibernation image partition /dev/sda9
[    4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.502184] PM: Hibernation image not present or could not be loaded.
[    4.502194] registered taskstats version 1
[    4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
[    4.512569] Initializing network drop monitor service
[    4.516031] Freeing unused kernel memory: 712k freed
[    4.516201] Write protecting the kernel read-only data: 6144k
[    4.516747] Freeing unused kernel memory: 12k freed
[    4.522858] Freeing unused kernel memory: 776k freed
[    4.564188] udevd[93]: starting version 173
[    4.566281] ACPI: acpi_idle yielding to intel_idle
[    4.624591] SCSI subsystem initialized
[    4.630767] libata version 3.00 loaded.
[    4.632419] ahci 0000:00:1f.2: version 3.0
[    4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    4.632554] ahci: SSS flag set, parallel bus scan disabled
[    4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst 
[    4.632616] ahci 0000:00:1f.2: setting latency timer to 64
[    4.634910] scsi0 : ahci
[    4.635536] scsi1 : ahci
[    4.636083] scsi2 : ahci
[    4.636721] scsi3 : ahci
[    4.637168] scsi4 : ahci
[    4.637475] scsi5 : ahci
[    4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
[    4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
[    4.637733] ata3: DUMMY
[    4.637734] ata4: DUMMY
[    4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
[    4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
[    4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
[    4.861939] Switching to clocksource tsc
[    4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[    4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.975693] ata1.00: configured for UDMA/133
[    4.976014] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  2AC1 PQ: 0 ANSI: 5
[    5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
[    5.303748] ata2.00: configured for UDMA/100
[    5.319899] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7700H  1.V0 PQ: 0 ANSI: 5
[    5.638306] ata5: SATA link down (SStatus 0 SControl 300)
[    5.958189] ata6: SATA link down (SStatus 0 SControl 300)
[    5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    5.964596] sd 0:0:0:0: [sda] Write Protect is off
[    5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.073618]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    9.667393] udevd[273]: starting version 173
[   10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[   10.447052] ACPI: Lid Switch [LID0]
[   10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   10.449952] ACPI: Power Button [PWRB]
[   10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[   10.484243] acpi device:4b: registered as cooling_device4
[   10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
[   10.484921] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   10.494126] thermal LNXTHERM:00: registered as thermal_zone0
[   10.494129] ACPI: Thermal Zone [TZ00] (58 C)
[   10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   10.506267] ACPI: Battery Slot [BAT0] (battery present)
[   10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   10.524583] thermal LNXTHERM:01: registered as thermal_zone1
[   10.524586] ACPI: Thermal Zone [TZ01] (58 C)
[   10.530700] ACPI: AC Adapter [ADP1] (off-line)
[   10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.773153] iTCO_vendor_support: vendor-support=0
[   10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.926971] sky2: driver version 1.28
[   10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   10.927049] sky2 0000:04:00.0: setting latency timer to 64
[   10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
[   10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
[   10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
[   11.021491] cfg80211: Calling CRDA to update world regulatory domain
[   11.030984] usbcore: registered new interface driver usbfs
[   11.031163] usbcore: registered new interface driver hub
[   11.031208] usbcore: registered new device driver usb
[   11.054022] sony_laptop: Sony Notebook Control Driver v0.6
[   11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
[   11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[   11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[   11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.269177] mei 0000:00:16.0: setting latency timer to 64
[   11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.354358] sdhci: Secure Digital Host Controller Interface driver
[   11.354362] sdhci: Copyright(c) Pierre Ossman
[   11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[   11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   11.374630] ehci_hcd 0000:00:1a.0: debug port 2
[   11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[   11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
[   11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   11.389714] hub 1-0:1.0: USB hub found
[   11.389721] hub 1-0:1.0: 2 ports detected
[   11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[   11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   11.389929] ehci_hcd 0000:00:1d.0: debug port 2
[   11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[   11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
[   11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   11.406377] hub 2-0:1.0: USB hub found
[   11.406382] hub 2-0:1.0: 2 ports detected
[   11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
[   11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[   11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
[   11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
[   11.515145] Registered led device: mmc0::
[   11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[   11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
[   11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[   11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[   11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
[   11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
[   11.515308] Registered led device: mmc1::
[   11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
[   11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
[   11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[   11.823379] hub 1-1:1.0: USB hub found
[   11.823555] hub 1-1:1.0: 6 ports detected
[   11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.881313] ath9k 0000:02:00.0: setting latency timer to 64
[   11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
[   11.931327] ath: EEPROM regdomain: 0x65
[   11.931329] ath: EEPROM indicates we should expect a direct regpair map
[   11.931333] ath: Country alpha2 being used: 00
[   11.931334] ath: Regpair used: 0x65
[   12.053537] hub 2-1:1.0: USB hub found
[   12.053638] hub 2-1:1.0: 8 ports detected
[   12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   12.058344] Disabling lock debugging due to kernel taint
[   12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
[   12.090143] [fglrx]   vendor: 1002 device: 68e0 count: 1
[   12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[   12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.090577] pci 0000:01:00.0: setting latency timer to 64
[   12.090779] [fglrx] Kernel PAT support is enabled
[   12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul  7 2011] with 1 minors
[   12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   12.101452] Registered led device: ath9k-phy0
[   12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
[   12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[   12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
[   12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
[   12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[   12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[   12.387463] cfg80211: World regulatory domain updated:
[   12.387466] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.387469] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.387472] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.387474] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.387477] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.387479] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.387493] cfg80211: Calling CRDA for country: IT
[   12.390329] cfg80211: Regulatory domain changed to country: IT
[   12.390332] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.390334] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.390337] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.390339] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   12.390341] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
[   12.939879] Linux media interface: v0.10
[   12.994380] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[   12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[   12.994502] usbcore: registered new interface driver usbhid
[   12.994504] usbhid: USB HID core driver
[   13.030968] Linux video capture interface: v2.00
[   13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
[   13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
[   13.061057] usbcore: registered new interface driver uvcvideo
[   13.061059] USB Video Class driver (v1.1.0)
[   15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
[   15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   15.505206] SGI XFS Quota Management subsystem
[   15.527846] XFS (sda10): Mounting Filesystem
[   16.058466] XFS (sda10): Ending clean mount
[   16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[   16.172257] REISERFS (device sda8): using ordered data mode
[   16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   16.180470] REISERFS (device sda8): checking transaction log (sda8)
[   16.225092] REISERFS (device sda8): Using r5 hash to sort names
[   16.362086] EXT3-fs: barriers not enabled
[   16.377355] kjournald starting.  Commit interval 5 seconds
[   16.377554] EXT3-fs (sda6): using internal journal
[   16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
[   16.475339] fuse init (API version 7.16)
[   17.345752] Adding 1052220k swap on /dev/sda9.  Priority:-1 extents:1 across:1052220k 

Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

Offline

Board footer

Powered by FluxBB