You are not logged in.

#1 2011-08-17 18:13:27

daoo
Member
Registered: 2011-08-17
Posts: 2

Touchpad detected as PS/2 Logitech Wheel Mouse

Hi,

The touchpad on my Asus U46SV laptop is being detected as a PS/2 Logitech Wheel Mouse. Therefore no touchpad driver is loaded and all fancy features (two-finger scrolling, disable while typing, etc) are unavailable. How can I fix this?

$ xinput list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ PS/2 Logitech Wheel Mouse               	id=13	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Video Bus                               	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ ASUS USB2.0 WebCam                      	id=10	[slave  keyboard (3)]
    ↳ Asus WMI hotkeys                        	id=11	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=12	[slave  keyboard (3)]
$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[    0.000000] Command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000aabcc000 (usable)
[    0.000000]  BIOS-e820: 00000000aabcc000 - 00000000aacdf000 (reserved)
[    0.000000]  BIOS-e820: 00000000aacdf000 - 00000000aace1000 (usable)
[    0.000000]  BIOS-e820: 00000000aace1000 - 00000000aacf4000 (reserved)
[    0.000000]  BIOS-e820: 00000000aacf4000 - 00000000aacf5000 (usable)
[    0.000000]  BIOS-e820: 00000000aacf5000 - 00000000aade8000 (reserved)
[    0.000000]  BIOS-e820: 00000000aade8000 - 00000000aaf19000 (usable)
[    0.000000]  BIOS-e820: 00000000aaf19000 - 00000000aafe8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
[    0.000000]  BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: ASUSTeK Computer Inc. U46SV/U46SV, BIOS U46SV.203 06/09/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF8000000 write-back
[    0.000000]   3 base 0A8000000 mask FFC000000 write-back
[    0.000000]   4 base 0AB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 14FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcc70] fcc70
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
[    0.000000]  0000000000 - 00aae00000 page 2M
[    0.000000]  00aae00000 - 00aaffd000 page 4k
[    0.000000] kernel direct mapping tables up to aaffd000 @ aaff8000-aaffd000
[    0.000000] init_memory_mapping: 0000000100000000-000000014fe00000
[    0.000000]  0100000000 - 014fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 14fe00000 @ 14fdf9000-14fe00000
[    0.000000] RAMDISK: 1fda0000 - 1fff0000
[    0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000aaf9bd98 000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20110413/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000aaf7c018 0DC69 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 00000000aafe5e40 00040
[    0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000aafe6d18 00038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
[    0.000000] ACPI: ECDT 00000000aafe5b18 000C1 (v01 _ASUS_ NoteBook 06222004 AMI  00000000)
[    0.000000] ACPI: MCFG 00000000aafe6c98 0003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000aaf7b818 00799 (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000aaf7a018 00996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
[    0.000000] ACPI: SLIC 00000000aaf9cc18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
[    0.000000] ACPI: SSDT 00000000aaf5ea98 002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: ASF! 00000000aafe5a18 000A0 (v32 INTEL   HCG568D 00000001 MSFT 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000014fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000014fe00000
[    0.000000]   NODE_DATA [000000014fdfb000 - 000000014fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b400000-ffff88014edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0014fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000aabcc
[    0.000000]     0: 0x000aacdf -> 0x000aace1
[    0.000000]     0: 0x000aacf4 -> 0x000aacf5
[    0.000000]     0: 0x000aade8 -> 0x000aaf19
[    0.000000]     0: 0x000aafe8 -> 0x000aaffd
[    0.000000]     0: 0x00100000 -> 0x0014fe00
[    0.000000] On node 0 totalpages: 1025699
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 680269 pages, LIFO batch:31
[    0.000000]   Normal zone: 4473 pages used for memmap
[    0.000000]   Normal zone: 322695 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000aabcc000 - 00000000aacdf000
[    0.000000] PM: Registered nosave memory: 00000000aace1000 - 00000000aacf4000
[    0.000000] PM: Registered nosave memory: 00000000aacf5000 - 00000000aade8000
[    0.000000] PM: Registered nosave memory: 00000000aaf19000 - 00000000aafe8000
[    0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
[    0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
[    0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[    0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[    0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fa00000 s78464 r8192 d23936 u131072
[    0.000000] pcpu-alloc: s78464 r8192 d23936 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1006885
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3963540k/5502976k available (4064k kernel code, 1400180k absent, 139256k reserved, 3304k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 2294.473 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.15 BogoMIPS (lpj=7648243)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000118] Security Framework initialized
[    0.000122] AppArmor: AppArmor disabled by boot time parameter
[    0.000492] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001691] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002141] Mount-cache hash table entries: 256
[    0.002461] Initializing cgroup subsys cpuacct
[    0.002487] Initializing cgroup subsys memory
[    0.002502] Initializing cgroup subsys devices
[    0.002504] Initializing cgroup subsys freezer
[    0.002505] Initializing cgroup subsys net_cls
[    0.002507] Initializing cgroup subsys blkio
[    0.002553] CPU: Physical Processor ID: 0
[    0.002555] CPU: Processor Core ID: 0
[    0.002560] mce: CPU supports 7 MCE banks
[    0.002572] CPU0: Thermal monitoring enabled (TM1)
[    0.002578] using mwait in idle threads.
[    0.003714] ACPI: Core revision 20110413
[    0.160380] ftrace: allocating 16144 entries in 64 pages
[    0.167075] Switched APIC routing to physical flat.
[    0.167426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.200410] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[    0.304675] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.304681] ... version:                3
[    0.304682] ... bit width:              48
[    0.304683] ... generic registers:      4
[    0.304685] ... value mask:             0000ffffffffffff
[    0.304686] ... max period:             000000007fffffff
[    0.304687] ... fixed-purpose events:   3
[    0.304688] ... event mask:             000000070000000f
[    0.324897] NMI watchdog enabled, takes one hw-pmu counter.
[    0.351341] Booting Node   0, Processors  #1
[    0.351348] smpboot cpu 1: start_ip = 99000
[    0.464652] NMI watchdog enabled, takes one hw-pmu counter.
[    0.484623]  #2
[    0.484627] smpboot cpu 2: start_ip = 99000
[    0.597913] NMI watchdog enabled, takes one hw-pmu counter.
[    0.617876]  #3
[    0.617880] smpboot cpu 3: start_ip = 99000
[    0.741252] NMI watchdog enabled, takes one hw-pmu counter.
[    0.747769] Brought up 4 CPUs
[    0.747775] Total of 4 processors activated (18364.91 BogoMIPS).
[    0.750911] devtmpfs: initialized
[    0.751676] PM: Registering ACPI NVS region at aaf19000 (847872 bytes)
[    0.752391] print_constraints: dummy: 
[    0.752459] NET: Registered protocol family 16
[    0.752545] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.752547] ACPI: bus type pci registered
[    0.752684] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.752687] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.768153] PCI: Using configuration type 1 for base access
[    0.768569] bio: create slab <bio-0> at 0
[    0.770460] ACPI: EC: EC description table is found, configuring boot EC
[    0.770465] ACPI: EC: Look up EC in DSDT
[    0.772328] ACPI: Executed 1 blocks of module-level executable AML code
[    0.784480] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.854764] ACPI: SSDT 00000000aadbc718 00694 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.855208] ACPI: Dynamic OEM Table Load:
[    0.855210] ACPI: SSDT           (null) 00694 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.864674] ACPI: SSDT 00000000aadbda98 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.865144] ACPI: Dynamic OEM Table Load:
[    0.865146] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.874544] ACPI: SSDT 00000000aadbbd98 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.874985] ACPI: Dynamic OEM Table Load:
[    0.874987] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.894586] ACPI: Interpreter enabled
[    0.894589] ACPI: (supports S0 S1 S3 S4 S5)
[    0.894611] ACPI: Using IOAPIC for interrupt routing
[    0.999159] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[    0.999351] ACPI: No dock devices found.
[    0.999352] HEST: Table not found.
[    0.999355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.999558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.999930] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.999932] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.999934] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.999936] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.999938] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.999940] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.999942] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.999944] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.999946] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.999948] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[    0.999950] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.999961] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    0.999994] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    1.000018] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.000021] pci 0000:00:01.0: PME# disabled
[    1.000038] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[    1.000048] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
[    1.000055] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.000059] pci 0000:00:02.0: reg 20: [io  0xe000-0xe03f]
[    1.000109] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.000132] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
[    1.000195] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.000200] pci 0000:00:16.0: PME# disabled
[    1.000231] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.000253] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
[    1.000326] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.000331] pci 0000:00:1a.0: PME# disabled
[    1.000355] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.000371] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[    1.000426] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.000430] pci 0000:00:1b.0: PME# disabled
[    1.000450] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.000513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.000517] pci 0000:00:1c.0: PME# disabled
[    1.000540] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    1.000603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.000607] pci 0000:00:1c.1: PME# disabled
[    1.000632] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.000695] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.000699] pci 0000:00:1c.3: PME# disabled
[    1.000723] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    1.000785] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.000789] pci 0000:00:1c.5: PME# disabled
[    1.000819] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.000841] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
[    1.000914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.000919] pci 0000:00:1d.0: PME# disabled
[    1.000944] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    1.001066] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.001085] pci 0000:00:1f.2: reg 10: [io  0xe0b0-0xe0b7]
[    1.001094] pci 0000:00:1f.2: reg 14: [io  0xe0a0-0xe0a3]
[    1.001102] pci 0000:00:1f.2: reg 18: [io  0xe090-0xe097]
[    1.001111] pci 0000:00:1f.2: reg 1c: [io  0xe080-0xe083]
[    1.001119] pci 0000:00:1f.2: reg 20: [io  0xe060-0xe07f]
[    1.001128] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
[    1.001161] pci 0000:00:1f.2: PME# supported from D3hot
[    1.001165] pci 0000:00:1f.2: PME# disabled
[    1.001183] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.001199] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[    1.001220] pci 0000:00:1f.3: reg 20: [io  0xe040-0xe05f]
[    1.001276] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
[    1.001284] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
[    1.001292] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.001301] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    1.001308] pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
[    1.001314] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
[    1.001346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.001348] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.001351] pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
[    1.001354] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.001399] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.001403] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.001407] pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
[    1.001414] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[    1.001480] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[    1.001508] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
[    1.001612] pci 0000:03:00.0: supports D1
[    1.001614] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.001619] pci 0000:03:00.0: PME# disabled
[    1.001657] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.001662] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    1.001666] pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
[    1.001672] pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[    1.001743] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
[    1.001766] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
[    1.001908] pci 0000:04:00.0: PME# supported from D0 D3hot
[    1.001914] pci 0000:04:00.0: PME# disabled
[    1.001944] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.001948] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    1.001952] pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
[    1.001959] pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[    1.002025] pci 0000:05:00.0: [1969:1083] type 0 class 0x000200
[    1.002053] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
[    1.002068] pci 0000:05:00.0: reg 18: [io  0x9000-0x907f]
[    1.002166] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.002171] pci 0000:05:00.0: PME# disabled
[    1.002210] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    1.002214] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    1.002219] pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
[    1.002225] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    1.002249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.002373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.002402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.002435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.002467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.002510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
[    1.002545]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.002548]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.002549] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.700980] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.701022] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    1.701063] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.701104] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.701146] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.701186] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.701226] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    1.701264] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    1.701338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.701345] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.701347] vgaarb: loaded
[    1.701348] vgaarb: bridge control possible 0000:01:00.0
[    1.701349] vgaarb: bridge control possible 0000:00:02.0
[    1.701410] PCI: Using ACPI for IRQ routing
[    1.702943] PCI: pci_cache_line_size set to 64 bytes
[    1.703021] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    1.703024] reserve RAM buffer: 00000000aabcc000 - 00000000abffffff 
[    1.703027] reserve RAM buffer: 00000000aace1000 - 00000000abffffff 
[    1.703029] reserve RAM buffer: 00000000aacf5000 - 00000000abffffff 
[    1.703031] reserve RAM buffer: 00000000aaf19000 - 00000000abffffff 
[    1.703033] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff 
[    1.703035] reserve RAM buffer: 000000014fe00000 - 000000014fffffff 
[    1.703130] NetLabel: Initializing
[    1.703131] NetLabel:  domain hash size = 128
[    1.703132] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.703144] NetLabel:  unlabeled traffic allowed by default
[    1.703158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.703163] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.705180] Switching to clocksource hpet
[    1.707228] Switched to NOHz mode on CPU #0
[    1.707282] Switched to NOHz mode on CPU #1
[    1.707289] Switched to NOHz mode on CPU #2
[    1.707371] Switched to NOHz mode on CPU #3
[    1.709995] pnp: PnP ACPI init
[    1.710009] ACPI: bus type pnp registered
[    1.710231] pnp 00:00: [bus 00-3e]
[    1.710233] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.710235] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.710236] pnp 00:00: [io  0x0d00-0xffff window]
[    1.710238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.710240] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.710242] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.710243] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.710245] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.710247] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.710248] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.710250] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.710252] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.710253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.710255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.710257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.710258] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.710260] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.710262] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[    1.710264] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.710335] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.710347] pnp 00:01: [io  0x0000-0x001f]
[    1.710349] pnp 00:01: [io  0x0081-0x0091]
[    1.710350] pnp 00:01: [io  0x0093-0x009f]
[    1.710351] pnp 00:01: [io  0x00c0-0x00df]
[    1.710353] pnp 00:01: [dma 4]
[    1.710371] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.710378] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.710395] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.710466] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.710484] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.710493] pnp 00:04: [io  0x00f0]
[    1.710501] pnp 00:04: [irq 13]
[    1.710519] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.710528] pnp 00:05: [io  0x002e-0x002f]
[    1.710530] pnp 00:05: [io  0x004e-0x004f]
[    1.710531] pnp 00:05: [io  0x0061]
[    1.710533] pnp 00:05: [io  0x0063]
[    1.710534] pnp 00:05: [io  0x0065]
[    1.710535] pnp 00:05: [io  0x0067]
[    1.710536] pnp 00:05: [io  0x0070]
[    1.710538] pnp 00:05: [io  0x0080]
[    1.710539] pnp 00:05: [io  0x0092]
[    1.710542] pnp 00:05: [io  0x00b2-0x00b3]
[    1.710544] pnp 00:05: [io  0x0680-0x069f]
[    1.710545] pnp 00:05: [io  0x1000-0x100f]
[    1.710546] pnp 00:05: [io  0xffff]
[    1.710548] pnp 00:05: [io  0xffff]
[    1.710549] pnp 00:05: [io  0x0400-0x0453]
[    1.710550] pnp 00:05: [io  0x0458-0x047f]
[    1.710552] pnp 00:05: [io  0x0500-0x057f]
[    1.710553] pnp 00:05: [io  0x164e-0x164f]
[    1.710595] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.710598] system 00:05: [io  0x1000-0x100f] has been reserved
[    1.710600] system 00:05: [io  0xffff] has been reserved
[    1.710601] system 00:05: [io  0xffff] has been reserved
[    1.710603] system 00:05: [io  0x0400-0x0453] has been reserved
[    1.710605] system 00:05: [io  0x0458-0x047f] has been reserved
[    1.710607] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.710609] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.710612] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.710619] pnp 00:06: [io  0x0070-0x0077]
[    1.710624] pnp 00:06: [irq 8]
[    1.710642] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.710658] pnp 00:07: [io  0x0454-0x0457]
[    1.710686] system 00:07: [io  0x0454-0x0457] has been reserved
[    1.710689] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.710714] pnp 00:08: [io  0x0060]
[    1.710716] pnp 00:08: [io  0x0064]
[    1.710721] pnp 00:08: [irq 1]
[    1.710741] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.710775] pnp 00:09: [irq 12]
[    1.710798] pnp 00:09: Plug and Play ACPI device, IDs ETD0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    1.758811] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.758813] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    1.758814] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.758816] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.758817] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
[    1.758819] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.758820] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    1.758822] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.758824] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.758825] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.758827] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[    1.758884] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.758887] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.758889] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.758891] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.758893] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[    1.758895] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.758897] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.758900] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.758902] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    1.758904] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.758906] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[    1.758909] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.758934] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
[    1.758981] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
[    1.758984] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.759078] pnp 00:0c: [mem 0x20000000-0x201fffff]
[    1.759080] pnp 00:0c: [mem 0x40000000-0x401fffff]
[    1.759131] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.759133] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[    1.759136] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.759147] pnp: PnP ACPI: found 13 devices
[    1.759148] ACPI: ACPI bus type pnp unregistered
[    1.764848] PCI: max bus depth: 1 pci_try_num: 2
[    1.764884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.764886] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.764889] pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
[    1.764892] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.764896] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.764899] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.764905] pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
[    1.764909] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[    1.764916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.764919] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    1.764925] pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
[    1.764929] pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[    1.764936] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.764939] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    1.764944] pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
[    1.764949] pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[    1.764956] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    1.764959] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    1.764964] pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
[    1.764969] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    1.764983] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.764986] pci 0000:00:01.0: setting latency timer to 64
[    1.764993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.764997] pci 0000:00:1c.0: setting latency timer to 64
[    1.765005] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.765010] pci 0000:00:1c.1: setting latency timer to 64
[    1.765018] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.765022] pci 0000:00:1c.3: setting latency timer to 64
[    1.765028] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.765033] pci 0000:00:1c.5: setting latency timer to 64
[    1.765037] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.765039] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.765041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.765042] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.765044] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.765046] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.765048] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.765050] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.765051] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.765053] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
[    1.765055] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[    1.765057] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.765059] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[    1.765061] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.765063] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.765064] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
[    1.765066] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
[    1.765068] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.765070] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
[    1.765072] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
[    1.765074] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    1.765076] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
[    1.765078] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
[    1.765080] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    1.765081] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
[    1.765083] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[    1.765138] NET: Registered protocol family 2
[    1.765319] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.766220] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.767965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.768183] TCP: Hash tables configured (established 524288 bind 65536)
[    1.768185] TCP reno registered
[    1.768194] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.768216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.768449] NET: Registered protocol family 1
[    1.768464] pci 0000:00:02.0: Boot video device
[    2.015314] PCI: CLS 64 bytes, default 64
[    2.015352] Unpacking initramfs...
[    2.047361] Freeing initrd memory: 2368k freed
[    2.047653] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.047657] Placing 64MB software IO TLB between ffff8800a6bcc000 - ffff8800aabcc000
[    2.047658] software IO TLB at phys 0xa6bcc000 - 0xaabcc000
[    2.048060] audit: initializing netlink socket (disabled)
[    2.048068] type=2000 audit(1313603670.739:1): initialized
[    2.054235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.067195] VFS: Disk quotas dquot_6.5.2
[    2.067311] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.067454] msgmni has been set to 7745
[    2.067640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.067672] io scheduler noop registered
[    2.067674] io scheduler deadline registered
[    2.067711] io scheduler cfq registered (default)
[    2.067791] pcieport 0000:00:01.0: setting latency timer to 64
[    2.067814] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.068084] intel_idle: MWAIT substates: 0x21120
[    2.068086] intel_idle: v0.4 model 0x2A
[    2.068087] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.068117] ERST: Table is not found!
[    2.068163] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.268759] Linux agpgart interface v0.103
[    2.268839] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.270529] i8042: Detected active multiplexing controller, rev 1.1
[    2.271297] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.271322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.271339] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.271357] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.271374] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.271436] mousedev: PS/2 mouse device common for all mice
[    2.271488] rtc_cmos 00:06: RTC can wake from S4
[    2.271585] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.271612] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.271729] cpuidle: using governor ladder
[    2.271883] cpuidle: using governor menu
[    2.272040] TCP cubic registered
[    2.272042] NET: Registered protocol family 17
[    2.272048] Registering the dns_resolver key type
[    2.272116] PM: Hibernation image not present or could not be loaded.
[    2.272120] registered taskstats version 1
[    2.278319] rtc_cmos 00:06: setting system clock to 2011-08-17 17:54:31 UTC (1313603671)
[    2.278398] Initializing network drop monitor service
[    2.279674] Freeing unused kernel memory: 712k freed
[    2.279759] Write protecting the kernel read-only data: 6144k
[    2.279988] Freeing unused kernel memory: 12k freed
[    2.282266] Freeing unused kernel memory: 776k freed
[    2.291723] udevd[55]: starting version 173
[    2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.339771] usbcore: registered new interface driver usbfs
[    2.339795] usbcore: registered new interface driver hub
[    2.341676] usbcore: registered new device driver usb
[    2.342076] SCSI subsystem initialized
[    2.346410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.346435] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.346439] libata version 3.00 loaded.
[    2.346468] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.346474] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.346533] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.346567] ehci_hcd 0000:00:1a.0: debug port 2
[    2.350464] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.350482] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[    2.361641] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.361880] hub 1-0:1.0: USB hub found
[    2.361885] hub 1-0:1.0: 2 ports detected
[    2.361969] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.362000] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.362005] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.362014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.362042] ehci_hcd 0000:00:1d.0: debug port 2
[    2.363294] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.363343] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    2.363348] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.363358] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    2.365933] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.365956] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[    2.378294] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.378444] hub 2-0:1.0: USB hub found
[    2.378448] hub 2-0:1.0: 2 ports detected
[    2.378553] ahci 0000:00:1f.2: version 3.0
[    2.378566] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.378706] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.378982] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    2.378987] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.378993] ahci 0000:00:1f.2: setting latency timer to 64
[    2.385587] scsi0 : ahci
[    2.385700] scsi1 : ahci
[    2.385786] scsi2 : ahci
[    2.385871] scsi3 : ahci
[    2.385959] scsi4 : ahci
[    2.386043] scsi5 : ahci
[    2.386296] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
[    2.386298] ata2: DUMMY
[    2.386302] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
[    2.386303] ata4: DUMMY
[    2.386304] ata5: DUMMY
[    2.386305] ata6: DUMMY
[    2.499498] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[    2.499623] xHCI xhci_add_endpoint called for root hub
[    2.499625] xHCI xhci_check_bandwidth called for root hub
[    2.499650] hub 3-0:1.0: USB hub found
[    2.499655] hub 3-0:1.0: 1 port detected
[    2.499701] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    2.499707] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    2.499773] xHCI xhci_add_endpoint called for root hub
[    2.499775] xHCI xhci_check_bandwidth called for root hub
[    2.499793] hub 4-0:1.0: USB hub found
[    2.499799] hub 4-0:1.0: 1 port detected
[    2.668242] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    2.704896] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.704948] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.706090] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.706102] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.706110] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.706942] ata1.00: ATA-8: ST9500423AS, 0002SDM1, max UDMA/133
[    2.706951] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.708085] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.708096] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.708128] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.708250] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.708253] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.708256] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.708955] ata1.00: configured for UDMA/133
[    2.709184] scsi 0:0:0:0: Direct-Access     ATA      ST9500423AS      0002 PQ: 0 ANSI: 5
[    2.710001] ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2ASW, 1.00, max UDMA/100
[    2.713629] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.713640] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.713648] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.715460] ata3.00: configured for UDMA/100
[    2.721215] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A2ASW 1.00 PQ: 0 ANSI: 5
[    2.726730] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.726735] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.726769] sd 0:0:0:0: [sda] Write Protect is off
[    2.726772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.726796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.730604] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.730613] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.730825] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.744374]  sda: sda1 sda2 sda3 sda4
[    2.744800] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.792361] hub 1-1:1.0: USB hub found
[    2.792438] hub 1-1:1.0: 6 ports detected
[    2.898039] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    3.022001] hub 2-1:1.0: USB hub found
[    3.022058] hub 2-1:1.0: 6 ports detected
[    3.047955] Refined TSC clocksource calibration: 2294.788 MHz.
[    3.047965] Switching to clocksource tsc
[    3.088035] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
[    3.154812] usb 1-1.1: device descriptor read/64, error -32
[    3.236960] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[    3.236965] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
[    3.236973] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
[    3.236982] PM: Marking nosave pages: 00000000aabcc000 - 00000000aacdf000
[    3.236987] PM: Marking nosave pages: 00000000aace1000 - 00000000aacf4000
[    3.236989] PM: Marking nosave pages: 00000000aacf5000 - 00000000aade8000
[    3.236994] PM: Marking nosave pages: 00000000aaf19000 - 00000000aafe8000
[    3.236998] PM: Marking nosave pages: 00000000aaffd000 - 0000000100000000
[    3.238148] PM: Basic memory bitmaps created
[    3.256065] PM: Basic memory bitmaps freed
[    3.281008] EXT3-fs: barriers not enabled
[    3.293754] kjournald starting.  Commit interval 5 seconds
[    3.293785] EXT3-fs (sda3): mounted filesystem with ordered data mode
[    3.408060] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[    4.495259] udevd[256]: starting version 173
[    4.578020] ACPI: acpi_idle yielding to intel_idle
[    4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    4.627906] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.628446] ACPI: AC Adapter [AC0] (on-line)
[    4.629029] ACPI: Lid Switch [LID]
[    4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    4.629603] ACPI: Sleep Button [SLPB]
[    4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.629658] ACPI: Power Button [PWRF]
[    4.662098] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.662105] ACPI: Battery Slot [BAT0] (battery present)
[    4.670264] thermal LNXTHERM:00: registered as thermal_zone0
[    4.670270] ACPI: Thermal Zone [TZ00] (58 C)
[    4.699183] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.699224] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.735002] wmi: Mapper loaded
[    4.816453] cfg80211: Calling CRDA to update world regulatory domain
[    4.837422] Linux media interface: v0.10
[    4.865736] Linux video capture interface: v2.00
[    4.900747] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[    4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    4.903716] usbcore: registered new interface driver uvcvideo
[    4.903718] USB Video Class driver (v1.1.0)
[    4.911301] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.911316] ath9k 0000:03:00.0: setting latency timer to 64
[    4.919790] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    4.919846] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    4.919869] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    4.927271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.935157] asus_wmi: ASUS WMI generic driver loaded
[    4.941164] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    4.943980] asus_wmi: Initialization: 0x1
[    4.944133] asus_wmi: SFUN value: 0x1a0af7
[    4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[    4.956683] asus_wmi: Backlight controlled by ACPI video driver
[    4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.960798] ath: EEPROM regdomain: 0x60
[    4.960800] ath: EEPROM indicates we should expect a direct regpair map
[    4.960802] ath: Country alpha2 being used: 00
[    4.960803] ath: Regpair used: 0x60
[    4.974078] Bluetooth: Core ver 2.16
[    4.974096] NET: Registered protocol family 31
[    4.974097] Bluetooth: HCI device and connection manager initialized
[    4.974098] Bluetooth: HCI socket layer initialized
[    4.974099] Bluetooth: L2CAP socket layer initialized
[    4.974302] Bluetooth: SCO socket layer initialized
[    4.984561] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    4.984762] Registered led device: ath9k-phy0
[    4.984768] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005360000, irq=17
[    4.999019] iTCO_vendor_support: vendor-support=0
[    5.000922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    5.000993] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    5.001120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.013874] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    5.014040] usbcore: registered new interface driver btusb
[    5.026354] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.026365] atl1c 0000:05:00.0: setting latency timer to 64
[    5.140660] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[    5.493359] hda_codec: ALC269VB: BIOS auto-probing.
[    5.525717] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[    5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.528376] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.528381] mei 0000:00:16.0: setting latency timer to 64
[    5.535903] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.536243] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    5.536438] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    5.537725] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    5.537829] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    5.566314] [drm] Initialized drm 1.1.0 20060810
[    5.578198] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.578202] i915 0000:00:02.0: setting latency timer to 64
[    5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
[    5.640873] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    5.640878] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.640879] [drm] Driver supports precise vblank timestamp query.
[    5.640934] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    5.641035] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    5.641105] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.641106] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    5.817467] fbcon: inteldrmfb (fb0) is primary device
[    5.981060] Console: switching to colour frame buffer device 170x48
[    5.982871] fb0: inteldrmfb frame buffer device
[    5.982872] drm: registered panic notifier
[    6.010757] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[    6.011024] acpi device:4e: registered as cooling_device4
[    6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    6.011212] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.011736] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[    6.011930] acpi device:59: registered as cooling_device5
[    6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
[    6.012073] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    6.012134] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.806806] EXT3-fs (sda3): using internal journal
[    7.032629] EXT3-fs: barriers not enabled
[    7.033131] kjournald starting.  Commit interval 5 seconds
[    7.033638] EXT3-fs (sda4): using internal journal
[    7.033650] EXT3-fs (sda4): mounted filesystem with ordered data mode
[    7.136750] Adding 2097140k swap on /dev/sda2.  Priority:-1 extents:1 across:2097140k 
[    8.830153] NET: Registered protocol family 10
[    9.400174] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[    9.400249] ehci_hcd 0000:00:1d.0: PME# enabled
[    9.413816] xhci_hcd 0000:04:00.0: PCI INT A disabled
[    9.413916] xhci_hcd 0000:04:00.0: PME# enabled
[    9.644602] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xdf007000-0xdf0073ff] (PCI address [0xdf007000-0xdf0073ff])
[    9.644638] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[    9.644679] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[    9.644796] ehci_hcd 0000:00:1d.0: PME# disabled
[    9.644816] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    9.644828] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    9.754551] xhci_hcd 0000:04:00.0: BAR 0: set to [mem 0xdd200000-0xdd20ffff] (PCI address [0xdd200000-0xdd20ffff])
[    9.754699] xhci_hcd 0000:04:00.0: PME# disabled
[    9.754721] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    9.754736] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    9.754760] usb usb3: root hub lost power or was reset
[    9.754764] usb usb4: root hub lost power or was reset
[  167.112308] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[  167.112437] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  177.751730] eth0: no IPv6 routers present
$ dmesg | grep -i input
[    2.304579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.627803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    4.629597] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    4.629654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.903658] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    4.945199] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[    4.956752] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.528101] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    5.528163] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.528222] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.616676] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input10
[    6.011185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[    6.012005] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12
$ cat /sys/class/input/mouse0/device/uevent
PRODUCT=11/2/1/63
NAME="PS/2 Logitech Wheel Mouse"
PHYS="isa0060/serio4/input0"
PROP=0
EV=7
KEY=70000 0 0 0 0
REL=103
MODALIAS=input:b0011v0002p0001e0063-e0,1,2,k110,111,112,r0,1,8,amlsfw
$ cat /var/log/Xorg.0.log
[   232.348] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[   232.349] 
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[   232.349] X Protocol Version 11, Revision 0
[   232.349] Build Operating System: Linux 3.0.0-ARCH x86_64 
[   232.349] Current Operating System: Linux asdfg 3.0-ARCH #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011 x86_64
[   232.350] Kernel command line: root=/dev/disk/by-uuid/f3bdc9ce-59f4-42c8-98cd-bacdc7803d59 ro
[   232.350] Build Date: 08 August 2011  08:24:13AM
[   232.350]  
[   232.350] Current version of pixman: 0.22.2
[   232.350] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   232.350] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   232.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 17 19:58:21 2011
[   232.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   232.406] (==) No Layout section.  Using the first Screen section.
[   232.406] (==) No screen section available. Using defaults.
[   232.406] (**) |-->Screen "Default Screen Section" (0)
[   232.406] (**) |   |-->Monitor "<default monitor>"
[   232.406] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   232.407] (==) Automatically adding devices
[   232.407] (==) Automatically enabling devices
[   232.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   232.464] 	Entry deleted from font path.
[   232.464] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   232.464] 	Entry deleted from font path.
[   232.464] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   232.465] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   232.465] 	Entry deleted from font path.
[   232.465] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   232.465] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   232.465] (==) ModulePath set to "/usr/lib/xorg/modules"
[   232.465] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   232.465] (II) Loader magic: 0x7d3620
[   232.465] (II) Module ABI versions:
[   232.465] 	X.Org ANSI C Emulation: 0.4
[   232.465] 	X.Org Video Driver: 10.0
[   232.465] 	X.Org XInput driver : 12.2
[   232.465] 	X.Org Server Extension : 5.0
[   232.466] (--) PCI:*(0:0:2:0) 8086:0116:1043:1662 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[   232.466] (--) PCI: (0:1:0:0) 10de:0df4:1043:1662 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[   232.466] (II) Open ACPI successful (/var/run/acpid.socket)
[   232.466] (II) LoadModule: "extmod"
[   232.498] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   232.500] (II) Module extmod: vendor="X.Org Foundation"
[   232.500] 	compiled for 1.10.3.901, module version = 1.0.0
[   232.500] 	Module class: X.Org Server Extension
[   232.500] 	ABI class: X.Org Server Extension, version 5.0
[   232.500] (II) Loading extension MIT-SCREEN-SAVER
[   232.500] (II) Loading extension XFree86-VidModeExtension
[   232.500] (II) Loading extension XFree86-DGA
[   232.500] (II) Loading extension DPMS
[   232.500] (II) Loading extension XVideo
[   232.500] (II) Loading extension XVideo-MotionCompensation
[   232.500] (II) Loading extension X-Resource
[   232.500] (II) LoadModule: "dbe"
[   232.500] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   232.501] (II) Module dbe: vendor="X.Org Foundation"
[   232.501] 	compiled for 1.10.3.901, module version = 1.0.0
[   232.501] 	Module class: X.Org Server Extension
[   232.501] 	ABI class: X.Org Server Extension, version 5.0
[   232.501] (II) Loading extension DOUBLE-BUFFER
[   232.501] (II) LoadModule: "glx"
[   232.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   232.517] (II) Module glx: vendor="X.Org Foundation"
[   232.517] 	compiled for 1.10.3.901, module version = 1.0.0
[   232.517] 	ABI class: X.Org Server Extension, version 5.0
[   232.517] (==) AIGLX enabled
[   232.517] (II) Loading extension GLX
[   232.517] (II) LoadModule: "record"
[   232.517] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   232.518] (II) Module record: vendor="X.Org Foundation"
[   232.518] 	compiled for 1.10.3.901, module version = 1.13.0
[   232.518] 	Module class: X.Org Server Extension
[   232.518] 	ABI class: X.Org Server Extension, version 5.0
[   232.518] (II) Loading extension RECORD
[   232.518] (II) LoadModule: "dri"
[   232.519] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   232.536] (II) Module dri: vendor="X.Org Foundation"
[   232.536] 	compiled for 1.10.3.901, module version = 1.0.0
[   232.536] 	ABI class: X.Org Server Extension, version 5.0
[   232.536] (II) Loading extension XFree86-DRI
[   232.536] (II) LoadModule: "dri2"
[   232.536] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   232.537] (II) Module dri2: vendor="X.Org Foundation"
[   232.537] 	compiled for 1.10.3.901, module version = 1.2.0
[   232.537] 	ABI class: X.Org Server Extension, version 5.0
[   232.537] (II) Loading extension DRI2
[   232.537] (==) Matched intel as autoconfigured driver 0
[   232.537] (==) Matched vesa as autoconfigured driver 1
[   232.537] (==) Matched fbdev as autoconfigured driver 2
[   232.537] (==) Assigned the driver to the xf86ConfigLayout
[   232.537] (II) LoadModule: "intel"
[   232.547] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   232.552] (II) Module intel: vendor="X.Org Foundation"
[   232.552] 	compiled for 1.10.2, module version = 2.15.0
[   232.552] 	Module class: X.Org Video Driver
[   232.552] 	ABI class: X.Org Video Driver, version 10.0
[   232.552] (II) LoadModule: "vesa"
[   232.552] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   232.562] (II) Module vesa: vendor="X.Org Foundation"
[   232.562] 	compiled for 1.10.0, module version = 2.3.0
[   232.562] 	Module class: X.Org Video Driver
[   232.562] 	ABI class: X.Org Video Driver, version 10.0
[   232.562] (II) LoadModule: "fbdev"
[   232.563] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   232.573] (II) Module fbdev: vendor="X.Org Foundation"
[   232.573] 	compiled for 1.10.0, module version = 0.4.2
[   232.573] 	ABI class: X.Org Video Driver, version 10.0
[   232.573] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[   232.574] (II) VESA: driver for VESA chipsets: vesa
[   232.574] (II) FBDEV: driver for framebuffer: fbdev
[   232.574] (--) using VT number 7

[   232.590] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   232.590] (WW) Falling back to old probe method for vesa
[   232.590] (WW) Falling back to old probe method for fbdev
[   232.590] (II) Loading sub module "fbdevhw"
[   232.590] (II) LoadModule: "fbdevhw"
[   232.591] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   232.596] (II) Module fbdevhw: vendor="X.Org Foundation"
[   232.596] 	compiled for 1.10.3.901, module version = 0.0.2
[   232.596] 	ABI class: X.Org Video Driver, version 10.0
[   232.596] drmOpenDevice: node name is /dev/dri/card0
[   232.596] drmOpenDevice: open result is 9, (OK)
[   232.597] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   232.597] drmOpenDevice: node name is /dev/dri/card0
[   232.597] drmOpenDevice: open result is 9, (OK)
[   232.597] drmOpenByBusid: drmOpenMinor returns 9
[   232.597] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   232.597] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   232.597] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   232.597] (==) intel(0): RGB weight 888
[   232.597] (==) intel(0): Default visual is TrueColor
[   232.597] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[   232.597] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[   232.597] (**) intel(0): Relaxed fencing enabled
[   232.597] (**) intel(0): Framebuffer tiled
[   232.597] (**) intel(0): Pixmaps tiled
[   232.597] (**) intel(0): 3D buffers tiled
[   232.597] (**) intel(0): SwapBuffers wait enabled
[   232.597] (==) intel(0): video overlay key set to 0x101fe
[   232.609] (II) intel(0): Output LVDS1 has no monitor section
[   232.609] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[   232.609] (II) intel(0): Output VGA1 has no monitor section
[   232.632] (II) intel(0): Output HDMI1 has no monitor section
[   232.670] (II) intel(0): Output DP1 has no monitor section
[   232.670] (II) intel(0): EDID for output LVDS1
[   232.670] (II) intel(0): Manufacturer: COR  Model: 579  Serial#: 0
[   232.670] (II) intel(0): Year: 2011  Week: 0
[   232.670] (II) intel(0): EDID Version: 1.3
[   232.670] (II) intel(0): Digital Display Input
[   232.670] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[   232.670] (II) intel(0): Gamma: 2.20
[   232.670] (II) intel(0): No DPMS capabilities specified
[   232.670] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   232.670] (II) intel(0): First detailed timing is preferred mode
[   232.670] (II) intel(0): redX: 0.586 redY: 0.350   greenX: 0.337 greenY: 0.564
[   232.670] (II) intel(0): blueX: 0.155 blueY: 0.112   whiteX: 0.313 whiteY: 0.329
[   232.670] (II) intel(0): Manufacturer's mask: 0
[   232.670] (II) intel(0): Supported detailed timing:
[   232.670] (II) intel(0): clock: 78.0 MHz   Image Size:  309 x 174 mm
[   232.670] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1598 h_border: 0
[   232.670] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 783 v_blanking: 814 v_border: 0
[   232.670] (II) intel(0): Supported detailed timing:
[   232.670] (II) intel(0): clock: 78.0 MHz   Image Size:  309 x 174 mm
[   232.670] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1598 h_border: 0
[   232.670] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 783 v_blanking: 814 v_border: 0
[   232.670] (II) intel(0):  InfoVision
[   232.670] (II) intel(0):  P140NWR1
[   232.670] (II) intel(0): EDID (in hex):
[   232.670] (II) intel(0): 	00ffffffffffff000df2790500000000
[   232.670] (II) intel(0): 	00150103801f11780a26f59659569027
[   232.670] (II) intel(0): 	1c505400000001010101010101010101
[   232.670] (II) intel(0): 	0101010101017d1e56e850002e303020
[   232.670] (II) intel(0): 	3c0035ae100000187d1e56e850002e30
[   232.670] (II) intel(0): 	30203c0035ae10000018000000fe0049
[   232.670] (II) intel(0): 	6e666f566973696f6e0a0a0a000000fe
[   232.670] (II) intel(0): 	00503134304e57523120202020200050
[   232.670] (II) intel(0): EDID vendor "COR", prod id 1401
[   232.671] (II) intel(0): Printing DDC gathered Modelines:
[   232.671] (II) intel(0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1598  768 771 783 814 -hsync -vsync (48.8 kHz)
[   232.671] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   232.671] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   232.671] (II) intel(0): Printing probed modes for output LVDS1
[   232.671] (II) intel(0): Modeline "1366x768"x60.0   78.05  1366 1414 1446 1598  768 771 783 814 -hsync -vsync (48.8 kHz)
[   232.671] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   232.671] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   232.671] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   232.671] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   232.671] (II) intel(0): EDID for output VGA1
[   232.695] (II) intel(0): EDID for output HDMI1
[   232.733] (II) intel(0): EDID for output DP1
[   232.733] (II) intel(0): Output LVDS1 connected
[   232.733] (II) intel(0): Output VGA1 disconnected
[   232.733] (II) intel(0): Output HDMI1 disconnected
[   232.733] (II) intel(0): Output DP1 disconnected
[   232.733] (II) intel(0): Using exact sizes for initial modes
[   232.733] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   232.733] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   232.733] (II) intel(0): Kernel page flipping support detected, enabling
[   232.733] (**) intel(0): Display dimensions: (310, 170) mm
[   232.733] (**) intel(0): DPI set to (111, 114)
[   232.733] (II) Loading sub module "fb"
[   232.733] (II) LoadModule: "fb"
[   232.733] (II) Loading /usr/lib/xorg/modules/libfb.so
[   232.744] (II) Module fb: vendor="X.Org Foundation"
[   232.744] 	compiled for 1.10.3.901, module version = 1.0.0
[   232.744] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   232.744] (II) Loading sub module "dri2"
[   232.744] (II) LoadModule: "dri2"
[   232.744] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   232.744] (II) Module dri2: vendor="X.Org Foundation"
[   232.744] 	compiled for 1.10.3.901, module version = 1.2.0
[   232.744] 	ABI class: X.Org Server Extension, version 5.0
[   232.744] (II) UnloadModule: "vesa"
[   232.744] (II) Unloading vesa
[   232.744] (II) UnloadModule: "fbdev"
[   232.744] (II) Unloading fbdev
[   232.744] (II) UnloadModule: "fbdevhw"
[   232.744] (II) Unloading fbdevhw
[   232.744] (==) Depth 24 pixmap format is 32 bpp
[   232.744] (II) intel(0): [DRI2] Setup complete
[   232.744] (II) intel(0): [DRI2]   DRI driver: i965
[   232.744] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   232.758] (II) UXA(0): Driver registered support for the following operations:
[   232.758] (II)         solid
[   232.758] (II)         copy
[   232.758] (II)         composite (RENDER acceleration)
[   232.758] (II)         put_image
[   232.758] (II)         get_image
[   232.758] (==) intel(0): Backing store disabled
[   232.758] (==) intel(0): Silken mouse enabled
[   232.758] (II) intel(0): Initializing HW Cursor
[   232.830] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   232.831] (==) intel(0): DPMS enabled
[   232.831] (==) intel(0): Intel XvMC decoder enabled
[   232.831] (II) intel(0): Set up textured video
[   232.832] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   232.832] (II) intel(0): direct rendering: DRI2 Enabled
[   232.832] (==) intel(0): hotplug detection: "enabled"
[   232.832] (--) RandR disabled
[   232.832] (II) Initializing built-in extension Generic Event Extension
[   232.832] (II) Initializing built-in extension SHAPE
[   232.832] (II) Initializing built-in extension MIT-SHM
[   232.832] (II) Initializing built-in extension XInputExtension
[   232.832] (II) Initializing built-in extension XTEST
[   232.832] (II) Initializing built-in extension BIG-REQUESTS
[   232.832] (II) Initializing built-in extension SYNC
[   232.832] (II) Initializing built-in extension XKEYBOARD
[   232.832] (II) Initializing built-in extension XC-MISC
[   232.832] (II) Initializing built-in extension SECURITY
[   232.832] (II) Initializing built-in extension XINERAMA
[   232.832] (II) Initializing built-in extension XFIXES
[   232.832] (II) Initializing built-in extension RENDER
[   232.832] (II) Initializing built-in extension RANDR
[   232.832] (II) Initializing built-in extension COMPOSITE
[   232.832] (II) Initializing built-in extension DAMAGE
[   232.949] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   232.949] (II) AIGLX: enabled GLX_INTEL_swap_event
[   232.949] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   232.949] (II) AIGLX: enabled GLX_SGI_make_current_read
[   232.949] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   232.949] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[   232.949] (II) GLX: Initialized DRI2 GL provider for screen 0
[   232.949] (II) intel(0): Setting screen physical size to 361 x 203
[   233.192] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   233.192] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   233.192] (II) LoadModule: "evdev"
[   233.192] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.201] (II) Module evdev: vendor="X.Org Foundation"
[   233.201] 	compiled for 1.10.0, module version = 2.6.0
[   233.201] 	Module class: X.Org XInput Driver
[   233.201] 	ABI class: X.Org XInput driver, version 12.2
[   233.201] (II) Using input driver 'evdev' for 'Power Button'
[   233.201] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.201] (**) Power Button: always reports core events
[   233.201] (**) Power Button: Device: "/dev/input/event3"
[   233.201] (--) Power Button: Found keys
[   233.201] (II) Power Button: Configuring as keyboard
[   233.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   233.201] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   233.201] (**) Option "xkb_rules" "evdev"
[   233.201] (**) Option "xkb_model" "evdev"
[   233.201] (**) Option "xkb_layout" "us"
[   233.240] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   233.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   233.240] (II) Using input driver 'evdev' for 'Video Bus'
[   233.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.240] (**) Video Bus: always reports core events
[   233.240] (**) Video Bus: Device: "/dev/input/event11"
[   233.241] (--) Video Bus: Found keys
[   233.241] (II) Video Bus: Configuring as keyboard
[   233.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[   233.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   233.241] (**) Option "xkb_rules" "evdev"
[   233.241] (**) Option "xkb_model" "evdev"
[   233.241] (**) Option "xkb_layout" "us"
[   233.251] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[   233.251] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   233.251] (II) Using input driver 'evdev' for 'Video Bus'
[   233.251] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.251] (**) Video Bus: always reports core events
[   233.251] (**) Video Bus: Device: "/dev/input/event12"
[   233.251] (--) Video Bus: Found keys
[   233.251] (II) Video Bus: Configuring as keyboard
[   233.251] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12/event12"
[   233.251] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   233.251] (**) Option "xkb_rules" "evdev"
[   233.251] (**) Option "xkb_model" "evdev"
[   233.251] (**) Option "xkb_layout" "us"
[   233.253] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   233.253] (II) No input driver/identifier specified (ignoring)
[   233.254] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   233.254] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   233.254] (II) Using input driver 'evdev' for 'Sleep Button'
[   233.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.254] (**) Sleep Button: always reports core events
[   233.254] (**) Sleep Button: Device: "/dev/input/event2"
[   233.254] (--) Sleep Button: Found keys
[   233.254] (II) Sleep Button: Configuring as keyboard
[   233.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   233.254] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   233.254] (**) Option "xkb_rules" "evdev"
[   233.254] (**) Option "xkb_model" "evdev"
[   233.254] (**) Option "xkb_layout" "us"
[   233.258] (II) config/udev: Adding input device ASUS USB2.0 WebCam (/dev/input/event4)
[   233.258] (**) ASUS USB2.0 WebCam: Applying InputClass "evdev keyboard catchall"
[   233.258] (II) Using input driver 'evdev' for 'ASUS USB2.0 WebCam'
[   233.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.258] (**) ASUS USB2.0 WebCam: always reports core events
[   233.258] (**) ASUS USB2.0 WebCam: Device: "/dev/input/event4"
[   233.258] (--) ASUS USB2.0 WebCam: Found keys
[   233.258] (II) ASUS USB2.0 WebCam: Configuring as keyboard
[   233.258] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[   233.258] (II) XINPUT: Adding extended input device "ASUS USB2.0 WebCam" (type: KEYBOARD)
[   233.258] (**) Option "xkb_rules" "evdev"
[   233.258] (**) Option "xkb_model" "evdev"
[   233.258] (**) Option "xkb_layout" "us"
[   233.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event7)
[   233.258] (II) No input driver/identifier specified (ignoring)
[   233.258] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[   233.258] (II) No input driver/identifier specified (ignoring)
[   233.259] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   233.259] (II) No input driver/identifier specified (ignoring)
[   233.261] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[   233.261] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   233.261] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[   233.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.261] (**) Asus WMI hotkeys: always reports core events
[   233.261] (**) Asus WMI hotkeys: Device: "/dev/input/event5"
[   233.261] (--) Asus WMI hotkeys: Found keys
[   233.261] (II) Asus WMI hotkeys: Configuring as keyboard
[   233.261] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
[   233.261] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD)
[   233.262] (**) Option "xkb_rules" "evdev"
[   233.262] (**) Option "xkb_model" "evdev"
[   233.262] (**) Option "xkb_layout" "us"
[   233.262] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   233.262] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   233.262] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   233.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.262] (**) AT Translated Set 2 keyboard: always reports core events
[   233.262] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   233.262] (--) AT Translated Set 2 keyboard: Found keys
[   233.262] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   233.262] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   233.262] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   233.262] (**) Option "xkb_rules" "evdev"
[   233.262] (**) Option "xkb_model" "evdev"
[   233.262] (**) Option "xkb_layout" "us"
[   233.262] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event10)
[   233.262] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[   233.262] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[   233.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.262] (**) PS/2 Logitech Wheel Mouse: always reports core events
[   233.262] (**) PS/2 Logitech Wheel Mouse: Device: "/dev/input/event10"
[   233.262] (--) PS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[   233.262] (--) PS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[   233.262] (--) PS/2 Logitech Wheel Mouse: Found relative axes
[   233.263] (--) PS/2 Logitech Wheel Mouse: Found x and y relative axes
[   233.263] (II) PS/2 Logitech Wheel Mouse: Configuring as mouse
[   233.263] (II) PS/2 Logitech Wheel Mouse: Adding scrollwheel support
[   233.263] (**) PS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[   233.263] (**) PS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   233.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[   233.263] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE)
[   233.263] (II) PS/2 Logitech Wheel Mouse: initialized for relative axes.
[   233.263] (**) PS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[   233.263] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[   233.263] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[   233.263] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[   233.263] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[   233.263] (II) No input driver/identifier specified (ignoring)
[   233.263] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   233.263] (II) No input driver/identifier specified (ignoring)
$ cat /var/log/Xorg.0.log | grep -i input
[   232.465] (II) The server relies on udev to provide the list of input devices.
[   232.465] 	X.Org XInput driver : 12.2
[   232.670] (II) intel(0): Digital Display Input
[   232.832] (II) Initializing built-in extension XInputExtension
[   233.192] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   233.192] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   233.192] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.201] 	Module class: X.Org XInput Driver
[   233.201] 	ABI class: X.Org XInput driver, version 12.2
[   233.201] (II) Using input driver 'evdev' for 'Power Button'
[   233.201] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.201] (**) Power Button: Device: "/dev/input/event3"
[   233.201] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   233.201] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   233.240] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   233.240] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   233.240] (II) Using input driver 'evdev' for 'Video Bus'
[   233.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.240] (**) Video Bus: Device: "/dev/input/event11"
[   233.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[   233.241] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   233.251] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[   233.251] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   233.251] (II) Using input driver 'evdev' for 'Video Bus'
[   233.251] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.251] (**) Video Bus: Device: "/dev/input/event12"
[   233.251] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:55/LNXVIDEO:01/input/input12/event12"
[   233.251] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   233.253] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   233.253] (II) No input driver/identifier specified (ignoring)
[   233.254] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   233.254] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   233.254] (II) Using input driver 'evdev' for 'Sleep Button'
[   233.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.254] (**) Sleep Button: Device: "/dev/input/event2"
[   233.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   233.254] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   233.258] (II) config/udev: Adding input device ASUS USB2.0 WebCam (/dev/input/event4)
[   233.258] (**) ASUS USB2.0 WebCam: Applying InputClass "evdev keyboard catchall"
[   233.258] (II) Using input driver 'evdev' for 'ASUS USB2.0 WebCam'
[   233.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.258] (**) ASUS USB2.0 WebCam: Device: "/dev/input/event4"
[   233.258] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[   233.258] (II) XINPUT: Adding extended input device "ASUS USB2.0 WebCam" (type: KEYBOARD)
[   233.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event7)
[   233.258] (II) No input driver/identifier specified (ignoring)
[   233.258] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[   233.258] (II) No input driver/identifier specified (ignoring)
[   233.259] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   233.259] (II) No input driver/identifier specified (ignoring)
[   233.261] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[   233.261] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   233.261] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[   233.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.261] (**) Asus WMI hotkeys: Device: "/dev/input/event5"
[   233.261] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
[   233.261] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD)
[   233.262] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   233.262] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   233.262] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   233.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.262] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   233.262] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   233.262] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   233.262] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event10)
[   233.262] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[   233.262] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[   233.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   233.262] (**) PS/2 Logitech Wheel Mouse: Device: "/dev/input/event10"
[   233.263] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[   233.263] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE)
[   233.263] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[   233.263] (II) No input driver/identifier specified (ignoring)
[   233.263] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   233.263] (II) No input driver/identifier specified (ignoring)

Offline

#2 2011-08-20 19:13:31

BHoward
Member
Registered: 2010-10-07
Posts: 11

Re: Touchpad detected as PS/2 Logitech Wheel Mouse

I had this same problem. I used the psmouse-elantech package in the AUR to fix it. https://aur.archlinux.org/packages.php? … 3&detail=0

Offline

#3 2011-08-21 08:55:12

daoo
Member
Registered: 2011-08-17
Posts: 2

Re: Touchpad detected as PS/2 Logitech Wheel Mouse

Installing psmouse-elantech makes my touchpad work like a charm. Thanks!

Offline

#4 2011-08-29 18:49:47

kalinatek
Member
From: Boston
Registered: 2007-01-07
Posts: 20

Re: Touchpad detected as PS/2 Logitech Wheel Mouse

Interestingly enough, the same thing happens in Windows on my U46E - the Synaptics driver recognizes the touchpad only as a PS/2 mouse and two-finger scroll won't work.

Edit: The elantech module you posted fixes the problem on the U46E, too. Thanks! Now to fix it for Windows...

Last edited by kalinatek (2011-08-29 20:13:07)

Offline

Board footer

Powered by FluxBB