You are not logged in.

Pages: 1

#1 2011-08-13 13:52:42

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

[SOLVED] Error building conky 1.8.0 from ABS

Hello,

Since conky 1.8.1 has a bug with fonts, I'm trying to build conky 1.8.0. I got the PKGBUILD from the ABS and modified it to install 1.8.0. I also had to include a fix for curl, found here:
http://aur.archlinux.org/packages.php?ID=31589.

However, during make I get the following error:

make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make[1]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make: *** [install-recursive] Fout 1
==> ERROR: A failure occurred in package().
    Aborting...

It says that "nothing has to be done for..."

Here's my PKGBUILD:

pkgname=conky
pkgver=1.8.0
pkgrel=3
pkgdesc='An advanced, highly configurable system monitor for X based on torsmo'
arch=('i686' 'x86_64')
url='http://conky.sourceforge.net/'
license=('custom')
replaces=('torsmo')
makedepends=('pkg-config')
depends=('alsa-lib' 'libxml2' 'curl' 'wireless_tools' 'libxft' 'glib2' 'libxdamage' 'imlib2')
backup=('etc/conky/conky.conf' 'etc/conky/conky_no_x11.conf')
source=("http://downloads.sourceforge.net/project/${pkgname}/${pkgname}/${pkgver}/${pkgname}-${pkgver}.tar.gz"
        'current-power.patch')

md5sums=('3fcc5bc005c6c046587134cdb9fdadfa'
         'eec51b5ccd242ed95b3b0a0fdd3252f8')

build() {
	cd "${srcdir}/${pkgname}-${pkgver}"

	patch -p1 < ../current-power.patch # See FS#21984

    sed -i '
    /#include <curl\/types.h>/ c\
    //#include <curl/types.h>' src/eve.c

    sed -i '
    /#include <curl\/types.h>/ c\
    //#include <curl/types.h>' src/ccurl_thread.c

	./configure \
		--prefix=/usr \
		--sysconfdir=/etc \
		--enable-ibm \
		--enable-curl \
		--enable-rss \
		--enable-weather-xoap \
		--enable-imlib2 \
		--disable-lua \
		--enable-wlan \

	make
}

package() {
	cd "${srcdir}/${pkgname}-${pkgver}"
	make DESTDIR="${pkgdir}" install
	install -D -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

Last edited by Unia (2011-08-18 10:33:56)

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#2 2011-08-13 14:20:43

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [SOLVED] Error building conky 1.8.0 from ABS

Run

LC_ALL=C <command>

to get output in English.
If you enabled C locale, it should work.


No idea about the error, sorry.

Offline

#3 2011-08-13 15:24:55

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: [SOLVED] Error building conky 1.8.0 from ABS

karol wrote:

Run

LC_ALL=C <command>

to get output in English.
If you enabled C locale, it should work.

That is handy for future errors, thanks! If you need that now, just tell me wink

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#4 2011-08-16 23:08:04

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: [SOLVED] Error building conky 1.8.0 from ABS

You didn't post the actual error message.  It should be higher up in the output.

Offline

#5 2011-08-17 15:07:03

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: [SOLVED] Error building conky 1.8.0 from ABS

I will try to built again and post the full output!

EDIT: Here you go:

┌─[jente@lappy conky 1.8.0][17:07:13] 
└─■ LC_ALL=C makepkg -si
==> Making package: conky 1.8.0-3 (Wed Aug 17 17:07:24 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
  -> Found conky-1.8.0.tar.gz
  -> Found current-power.patch
==> Validating source files with md5sums...
    conky-1.8.0.tar.gz ... Passed
    current-power.patch ... Passed
==> Extracting Sources...
  -> Extracting conky-1.8.0.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
patching file src/linux.c
Hunk #1 succeeded at 1654 (offset -17 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
configure: WARNING: Libtool does not cope well with whitespace in `pwd`
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for X11... yes
checking for Imlib2... yes
checking iwlib.h usability... yes
checking iwlib.h presence... yes
checking for iwlib.h... yes
checking for iw_sockets_open in -liw... yes
checking for getnameinfo... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for Xext... yes
checking for XDamage... yes
checking for Xft... yes
checking for GLib2... yes
checking for libcurl... yes
checking for libxml2... yes
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking semaphore.h usability... yes
checking semaphore.h presence... yes
checking for semaphore.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... xsltproc
checking if /usr/bin/ld -m elf_x86_64 accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands

conky 1.8.0 configured successfully:

 Installing into:   /usr
 System config dir: /etc
 C compiler flags:           -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W
 Libraries:         -liw  -lncurses -lm -lX11   -lImlib2    -lXext   -lXdamage -lXfixes   -lXft   -lglib-2.0   -lcurl   -lxml2   -lasound -lrt 
 Linker flags:       -Wl,-O1

 * X11:
  X11 support:      yes
  XDamage support:  yes
  XDBE support:     yes
  Xft support:      yes
  ARGB support      yes

 * Music detection:
  Audacious:        no
  BMPx:             no
  MPD:              yes
  MOC:              yes
  XMMS2:            no

 * General:
  math:             yes
  hddtemp:          yes
  portmon:          yes
  RSS:              yes
  Curl:             yes
  Weather
    METAR:          yes
    XOAP:           yes
  wireless:         yes
  IBM:              yes
  nvidia:           no
  eve-online:       no
  config-output:    yes
  Imlib2:           yes
  ALSA mixer:       yes
  apcupsd:          yes
  I/O stats:        yes

 * Lua (no) bindings:
  Cairo:            no
  Imlib2:           no

Making all in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make  all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\"   -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-linux.o -MD -MP -MF .deps/conky-linux.Tpo -c -o conky-linux.o `test -f 'linux.c' || echo './'`linux.c
linux.c: In function 'update_net_stats':
linux.c:345:12: warning: variable 'has_bitrate' set but not used [-Wunused-but-set-variable]
linux.c: In function 'is_disk':
linux.c:2287:18: warning: 'dev_last' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-linux.Tpo .deps/conky-linux.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\"   -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-ccurl_thread.o -MD -MP -MF .deps/conky-ccurl_thread.Tpo -c -o conky-ccurl_thread.o `test -f 'ccurl_thread.c' || echo './'`ccurl_thread.c
mv -f .deps/conky-ccurl_thread.Tpo .deps/conky-ccurl_thread.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\"   -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-conky.o -MD -MP -MF .deps/conky-conky.Tpo -c -o conky-conky.o `test -f 'conky.c' || echo './'`conky.c
conky.c: In function 'generate_text_internal':
conky.c:761:19: warning: variable 'needed' set but not used [-Wunused-but-set-variable]
conky.c: In function 'draw_each_line_inner':
conky.c:3099:13: warning: 'font_h' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-conky.Tpo .deps/conky-conky.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\"   -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-core.o -MD -MP -MF .deps/conky-core.Tpo -c -o conky-core.o `test -f 'core.c' || echo './'`core.c
mv -f .deps/conky-core.Tpo .deps/conky-core.Po
/bin/sh ../libtool --tag=CC   --mode=link gcc -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include     -I/usr/include/libxml2   -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -lpthread -lm -Wl,--hash-style=gnu -Wl,--as-needed -o conky  conky-conf_cookie.o   conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o  conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o   conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o  conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o   conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o  -liw  -lncurses -lm -lX11   -lImlib2    -lXext   -lXdamage -lXfixes   -lXft   -lglib-2.0   -lcurl   -lxml2   -lasound -lrt 
libtool: link: gcc -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed -o conky conky-conf_cookie.o conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o  -lpthread -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making all in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making all in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make  all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making all in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make  install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin"
  /bin/sh ../libtool   --mode=install /bin/install -c conky '/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin'
libtool: install: /bin/install -c conky /home/jente/packages/arch/conky 1.8.0/pkg/usr/bin/conky
/bin/install: target `1.8.0/pkg/usr/bin/conky' is not a directory
make[3]: *** [install-binPROGRAMS] Error 1
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making install in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1"
 /bin/install -c -m 644 conky.1 '/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making install in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make  install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
test -z "/usr/lib/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/lib/conky"
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making install in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/etc/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky"
 /bin/install -c -m 644 conky.conf conky_no_x11.conf '/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in package().
    Aborting...

Last edited by Unia (2011-08-17 15:08:43)

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#6 2011-08-17 22:14:35

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: [SOLVED] Error building conky 1.8.0 from ABS

You're building the package in a "/home/jente/packages/arch/conky 1.8.0" directory. Remove the space in the pathname, that's what cause the problem. You might want to report this bug upstream.

Offline

#7 2011-08-17 22:17:29

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: [SOLVED] Error building conky 1.8.0 from ABS

Snowman wrote:

You're building the package in a "/home/jente/packages/arch/conky 1.8.0" directory. Remove the space in the pathname, that's what cause the problem. You might want to report this bug upstream.

Oooh, that works indeed, thanks! Do you mean reporting this at pacman/makepkg? Perhaps you have a link or something, I have never reported a bug before..

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#8 2011-08-17 22:27:16

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: [SOLVED] Error building conky 1.8.0 from ABS

I mean report at conky bug tracker. Check the conky website. there will probably be instructions there.

Offline

#9 2011-08-17 22:27:22

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [SOLVED] Error building conky 1.8.0 from ABS

I took your PKGBUILD and it worked for me, you did create '/home/jente/packages/Arch/conky 1.8.0' yourself, right? I built it in /home/karol/test/foo1/src/conky-1.8.0 and all was fine.

Offline

#10 2011-08-17 22:37:08

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: [SOLVED] Error building conky 1.8.0 from ABS

karol wrote:

I took your PKGBUILD and it worked for me, you did create '/home/jente/packages/Arch/conky 1.8.0' yourself, right? I built it in /home/karol/test/foo1/src/conky-1.8.0 and all was fine.

I created that folder myself, yes. Once I removed the versioning, it built correctly so it was indeed the space in there.

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#11 2011-08-17 22:44:30

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: [SOLVED] Error building conky 1.8.0 from ABS

Unia wrote:
karol wrote:

I took your PKGBUILD and it worked for me, you did create '/home/jente/packages/Arch/conky 1.8.0' yourself, right? I built it in /home/karol/test/foo1/src/conky-1.8.0 and all was fine.

I created that folder myself, yes. Once I removed the versioning, it built correctly so it was indeed the space in there.

If this was the bug Snowman was referring to, I think there's no need to report it anywhere, just remember that Linux generally doesn't like spaces in file- and directory names.

You can safely use e.g. conky_1.8.0 or conky-1.8.0.

Offline

#12 2011-08-17 22:45:51

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: [SOLVED] Error building conky 1.8.0 from ABS

Here's my bug report for anyone interested:
http://sourceforge.net/tracker/?func=de … _id=143975

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

Pages: 1

Board footer

Powered by FluxBB