You are not logged in.

Pages: 1

#1 2011-07-31 13:58:09

jayray
Member
Registered: 2006-10-15
Posts: 38

update to gnome 3 = frozen desktop with nvidia [solved]

Hello, I have a few questions after running pacman (probably been 9 months since last run..) I'm running a geforce 7300 le on this system. Xorg freezes up at startup using both kde and gnome as wm, running custom kernel 2.6.30 and 275.21 nvidia drivers.
I can get ICEWM to work. I have  renamed the old config directories, and even setup a new user with no previous configs and it still locks up. It is not outputting any new info to .session-error. Here is the Xorg.0.log

[ 41040.030] 
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 41040.030] X Protocol Version 11, Revision 0
[ 41040.030] Build Operating System: Linux 2.6.39-ARCH i686 
[ 41040.030] Current Operating System: Linux grayza.home.digitalgoat.com 2.6.30.4 #16 SMP Sat Jul 30 18:08:31 EDT 2011 i686
[ 41040.030] Kernel command line: root=/dev/sda2
[ 41040.030] Build Date: 09 July 2011  07:57:07AM
[ 41040.030]  
[ 41040.030] Current version of pixman: 0.22.2
[ 41040.030]    Before reporting problems, check [url]http://wiki.x.org[/url]
        to make sure that you have the latest version.
[ 41040.030] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41040.030] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 31 09:49:11 2011
[ 41040.066] (==) Using config file: "/etc/X11/xorg.conf"
[ 41040.066] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41040.095] (==) ServerLayout "Default Layout"
[ 41040.095] (**) |-->Screen "Screen0" (0)
[ 41040.095] (**) |   |-->Monitor "Monitor0"
[ 41040.095] (**) |   |-->Device "Card0"
[ 41040.095] (**) |-->Input Device "Keyboard0"
[ 41040.095] (**) |-->Input Device "Mouse0"
[ 41040.095] (==) Automatically adding devices
[ 41040.095] (==) Automatically enabling devices
[ 41040.146] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 41040.146]    Entry deleted from font path.
[ 41040.185] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[ 41040.185] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41040.185] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 41040.185] (WW) Disabling Keyboard0
[ 41040.185] (WW) Disabling Mouse0
[ 41040.185] (II) Loader magic: 0x822e1a0
[ 41040.185] (II) Module ABI versions:
[ 41040.185]    X.Org ANSI C Emulation: 0.4
[ 41040.185]    X.Org Video Driver: 10.0
[ 41040.185]    X.Org XInput driver : 12.2
[ 41040.185]    X.Org Server Extension : 5.0
[ 41040.186] (--) PCI:*(0:1:0:0) 10de:01d1:1462:0274 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 41040.186] (II) Open ACPI successful (/var/run/acpid.socket)
[ 41040.186] (II) LoadModule: "extmod"
[ 41040.231] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 41040.257] (II) Module extmod: vendor="X.Org Foundation"
[ 41040.257]    compiled for 1.10.3, module version = 1.0.0
[ 41040.257]    Module class: X.Org Server Extension
[ 41040.257]    ABI class: X.Org Server Extension, version 5.0
[ 41040.257] (II) Loading extension MIT-SCREEN-SAVER
[ 41040.257] (II) Loading extension XFree86-VidModeExtension
[ 41040.257] (II) Loading extension XFree86-DGA
[ 41040.258] (II) Loading extension DPMS
[ 41040.258] (II) Loading extension XVideo
[ 41040.258] (II) Loading extension XVideo-MotionCompensation
[ 41040.258] (II) Loading extension X-Resource
[ 41040.258] (II) LoadModule: "dbe"
[ 41040.258] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 41040.258] (II) Module dbe: vendor="X.Org Foundation"
[ 41040.258]    compiled for 1.10.3, module version = 1.0.0
[ 41040.258]    Module class: X.Org Server Extension
[ 41040.258]    ABI class: X.Org Server Extension, version 5.0
[ 41040.258] (II) Loading extension DOUBLE-BUFFER
[ 41040.258] (II) LoadModule: "glx"
[ 41040.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41041.401] (II) Module glx: vendor="NVIDIA Corporation"
[ 41041.401]    compiled for 4.0.2, module version = 1.0.0
[ 41041.401]    Module class: X.Org Server Extension
[ 41041.402] (II) NVIDIA GLX Module  275.21  Mon Jul 18 14:55:52 PDT 2011
[ 41041.402] (II) Loading extension GLX
[ 41041.402] (II) LoadModule: "record"
[ 41041.402] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 41041.433] (II) Module record: vendor="X.Org Foundation"
[ 41041.433]    compiled for 1.10.3, module version = 1.13.0
[ 41041.433]    Module class: X.Org Server Extension
[ 41041.433]    ABI class: X.Org Server Extension, version 5.0
[ 41041.433] (II) Loading extension RECORD
[ 41041.433] (II) LoadModule: "dri"
[ 41041.433] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 41041.459] (II) Module dri: vendor="X.Org Foundation"
[ 41041.459]    compiled for 1.10.3, module version = 1.0.0
[ 41041.459]    ABI class: X.Org Server Extension, version 5.0
[ 41041.459] (II) Loading extension XFree86-DRI
[ 41041.459] (II) LoadModule: "dri2"
[ 41041.459] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 41041.460] (II) Module dri2: vendor="X.Org Foundation"
[ 41041.460]    compiled for 1.10.3, module version = 1.2.0
[ 41041.460]    ABI class: X.Org Server Extension, version 5.0
[ 41041.460] (II) Loading extension DRI2
[ 41041.460] (II) LoadModule: "nvidia"
[ 41041.460] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 41041.506] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 41041.506]    compiled for 4.0.2, module version = 1.0.0
[ 41041.506]    Module class: X.Org Video Driver
[ 41041.542] (II) NVIDIA dlloader X Driver  275.21  Mon Jul 18 14:38:30 PDT 2011
[ 41041.561] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 41041.562] (--) using VT number 7

[ 41041.571] (II) Loading sub module "fb"
[ 41041.571] (II) LoadModule: "fb"
[ 41041.624] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 41041.637] (II) Module fb: vendor="X.Org Foundation"
[ 41041.637]    compiled for 1.10.3, module version = 1.0.0
[ 41041.637]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 41041.637] (II) Loading sub module "wfb"
[ 41041.637] (II) LoadModule: "wfb"
[ 41041.637] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 41041.646] (II) Module wfb: vendor="X.Org Foundation"
[ 41041.646]    compiled for 1.10.3, module version = 1.0.0
[ 41041.646]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 41041.646] (II) Loading sub module "ramdac"
[ 41041.646] (II) LoadModule: "ramdac"
[ 41041.646] (II) Module "ramdac" already built-in
[ 41041.694] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 41041.694] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 41041.694] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 41041.708] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 41041.708] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 41041.708] (==) NVIDIA(0): RGB weight 888
[ 41041.708] (==) NVIDIA(0): Default visual is TrueColor
[ 41041.708] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 41042.126] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 41042.131] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:1:0:0 (GPU-0)
[ 41042.131] (--) NVIDIA(0): Memory: 524288 kBytes
[ 41042.131] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.32
[ 41042.131] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 41042.131] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 41042.131] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:1:0:0
[ 41042.131] (--) NVIDIA(0):     CRT-0
[ 41042.131] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 41042.139] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 41042.139] (II) NVIDIA(0): Validated modes:
[ 41042.139] (II) NVIDIA(0):     "1680x1050"
[ 41042.139] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 41042.155] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 41042.155] (WW) NVIDIA(0):     from CRT-0's EDID.
[ 41042.155] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 41042.155] (--) Depth 24 pixmap format is 32 bpp
[ 41042.160] (II) NVIDIA(0): Setting mode "1680x1050"
[ 41042.252] (II) Loading extension NV-GLX
[ 41042.300] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 41042.300] (==) NVIDIA(0): Backing store disabled
[ 41042.300] (==) NVIDIA(0): Silken mouse enabled
[ 41042.300] (**) NVIDIA(0): DPMS enabled
[ 41042.301] (II) Loading extension NV-CONTROL
[ 41042.302] (II) Loading extension XINERAMA
[ 41042.302] (II) Loading sub module "dri2"
[ 41042.302] (II) LoadModule: "dri2"
[ 41042.302] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 41042.302] (II) Module dri2: vendor="X.Org Foundation"
[ 41042.302]    compiled for 1.10.3, module version = 1.2.0
[ 41042.302]    ABI class: X.Org Server Extension, version 5.0
[ 41042.302] (II) NVIDIA(0): [DRI2] Setup complete
[ 41042.302] (==) RandR enabled
[ 41042.302] (II) Initializing built-in extension Generic Event Extension
[ 41042.302] (II) Initializing built-in extension SHAPE
[ 41042.302] (II) Initializing built-in extension MIT-SHM
[ 41042.302] (II) Initializing built-in extension XInputExtension
[ 41042.302] (II) Initializing built-in extension XTEST
[ 41042.302] (II) Initializing built-in extension BIG-REQUESTS
[ 41042.302] (II) Initializing built-in extension SYNC
[ 41042.302] (II) Initializing built-in extension XKEYBOARD
[ 41042.302] (II) Initializing built-in extension XC-MISC
[ 41042.302] (II) Initializing built-in extension SECURITY
[ 41042.302] (II) Initializing built-in extension XINERAMA
[ 41042.302] (II) Initializing built-in extension XFIXES
[ 41042.302] (II) Initializing built-in extension RENDER
[ 41042.302] (II) Initializing built-in extension RANDR
[ 41042.302] (II) Initializing built-in extension COMPOSITE
[ 41042.302] (II) Initializing built-in extension DAMAGE
[ 41042.304] (II) Initializing extension GLX
[ 41042.726] (II) config/udev: Adding input device Power Button (/dev/event0)
[ 41042.726] (II) No input driver/identifier specified (ignoring)
[ 41042.727] (II) config/udev: Adding input device Power Button (/dev/event1)
[ 41042.727] (II) No input driver/identifier specified (ignoring)
[ 41042.729] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/event3)
[ 41042.729] (II) No input driver/identifier specified (ignoring)
[ 41042.729] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/mouse0)
[ 41042.729] (II) No input driver/identifier specified (ignoring)
[ 41042.733] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/event2)
[ 41042.733] (II) No input driver/identifier specified (ignoring)

Last edited by jayray (2011-08-27 12:33:24)

Offline

#2 2011-07-31 14:46:17

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Please edit you post and add [ code ] tags https://bbs.archlinux.org/help.php#bbcode

jayray wrote:

running custom kernel 2.6.30 and 275.21 nvidia drivers.

Are you really using 2.6.30 or is it a typo?

[ 41042.126] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0

That's certainly one of your problems - how do you connect to your monitor?

Offline

#3 2011-07-31 14:57:15

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Nope you read it correctly, using 2.6.30 for consistency with my other boxes. I connect with DVI. Thanks for your assistance!
J

Offline

#4 2011-07-31 14:58:53

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: update to gnome 3 = frozen desktop with nvidia [solved]

jayray wrote:

I connect with DVI. Thanks for your assistance!
J

Is it a straight DVI or a DVI-to-VGA thingy?

Offline

#5 2011-07-31 15:48:43

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

it is a straight through dvi connection. I dont think the card has vga on it. I do get to a blue striped wallpaper but it freezes... seems to happen to met every time I run pacman. hi hi

Last edited by jayray (2011-07-31 19:08:03)

Offline

#6 2011-07-31 20:13:58

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Tried a few things. KDE also hangs before desktop.. Almost sounds like an Xorg/driver issue from what I have been reading. Below is my config

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "ServerFlags"
    Option         "AllowEmptyInput" "no"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

 # Warning: This may fry old Monitors
 # Very conservative. May flicker.
#       VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
        #  Default modes distilled from
        #      "VESA and Industry Standards and Guide for Computer Display Monitor
        #       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
        #  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
        # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier     "Monitor0"
    HorizSync       28.0 - 96.0
    VertRefresh     50.0 - 62.0
    ModeLine       "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine       "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine       "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine       "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine       "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine       "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine       "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine       "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine       "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine       "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine       "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine       "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine       "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine       "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine       "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine       "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine       "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine       "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine       "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine       "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine       "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine       "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine       "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine       "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine       "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine       "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine       "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine       "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine       "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine       "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine       "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine       "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine       "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine       "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine       "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine       "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine       "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine       "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    ModeLine       "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
    Option         "DPMS" "true"
#       HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection

Section "Device"

#   Driver          "vesa"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "All"
    BoardName      "All"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "PixmapCacheSize" "300000"
    Option         "OnDemandVBlankInterrupts" "True"
    SubSection     "Display"
        Depth       8
        Modes      "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1680x1050"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1680x1050"
    EndSubSection
EndSection

Offline

#7 2011-07-31 20:18:00

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Have you tried w/o the xorg.conf config?

Offline

#8 2011-07-31 21:31:43

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Same results, but they are in 1024X768, and it looks a little confused about the driver..

X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH i686 
Current Operating System: Linux grayza.home.digitalgoat.com 2.6.30.4 #16 SMP Sat Jul 30 18:08:31 EDT 2011 i686
Kernel command line: root=/dev/sda2
Build Date: 09 July 2011  07:57:07AM
 
Current version of pixman: 0.22.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 31 17:29:06 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module nouveau not found.
(EE) [drm] failed to open device
31/07/2011 17:29:07 passing arg to libvncserver: -rfbauth
31/07/2011 17:29:07 passing arg to libvncserver: /home/jason/.vnc/passwd
31/07/2011 17:29:07 x11vnc version: 0.9.12 lastmod: 2010-09-09  pid: 13795
31/07/2011 17:29:07 Using X display :0
31/07/2011 17:29:07 rootwin: 0x1ad reswin: 0x400001 dpy: 0x83f9640
31/07/2011 17:29:07 
31/07/2011 17:29:07 ------------------ USEFUL INFORMATION ------------------
31/07/2011 17:29:07 X DAMAGE available on display, using it for polling hints.
31/07/2011 17:29:07   To disable this behavior use: '-noxdamage'
31/07/2011 17:29:07 
31/07/2011 17:29:07   Most compositing window managers like 'compiz' or 'beryl'
31/07/2011 17:29:07   cause X DAMAGE to fail, and so you may not see any screen
31/07/2011 17:29:07   updates via VNC.  Either disable 'compiz' (recommended) or
31/07/2011 17:29:07   supply the x11vnc '-noxdamage' command line option.
31/07/2011 17:29:07 
31/07/2011 17:29:07 Wireframing: -wireframe mode is in effect for window moves.
31/07/2011 17:29:07   If this yields undesired behavior (poor response, painting
31/07/2011 17:29:07   errors, etc) it may be disabled:
31/07/2011 17:29:07    - use '-nowf' to disable wireframing completely.
31/07/2011 17:29:07    - use '-nowcr' to disable the Copy Rectangle after the
31/07/2011 17:29:07      moved window is released in the new position.
31/07/2011 17:29:07   Also see the -help entry for tuning parameters.
31/07/2011 17:29:07   You can press 3 Alt_L's (Left "Alt" key) in a row to 
31/07/2011 17:29:07   repaint the screen, also see the -fixscreen option for
31/07/2011 17:29:07   periodic repaints.
31/07/2011 17:29:07 
31/07/2011 17:29:07 XFIXES available on display, resetting cursor mode
31/07/2011 17:29:07   to: '-cursor most'.
31/07/2011 17:29:07   to disable this behavior use: '-cursor arrow'
31/07/2011 17:29:07   or '-noxfixes'.
31/07/2011 17:29:07 using XFIXES for cursor drawing.
31/07/2011 17:29:07 GrabServer control via XTEST.
31/07/2011 17:29:07 
31/07/2011 17:29:07 Scroll Detection: -scrollcopyrect mode is in effect to
31/07/2011 17:29:07   use RECORD extension to try to detect scrolling windows
31/07/2011 17:29:07   (induced by either user keystroke or mouse input).
31/07/2011 17:29:07   If this yields undesired behavior (poor response, painting
31/07/2011 17:29:07   errors, etc) it may be disabled via: '-noscr'
31/07/2011 17:29:07   Also see the -help entry for tuning parameters.
31/07/2011 17:29:07   You can press 3 Alt_L's (Left "Alt" key) in a row to 
31/07/2011 17:29:07   repaint the screen, also see the -fixscreen option for
31/07/2011 17:29:07   periodic repaints.
31/07/2011 17:29:07 
31/07/2011 17:29:07 Client Side Caching: -ncache mode is in effect to provide
31/07/2011 17:29:07   client-side pixel data caching.  This speeds up
31/07/2011 17:29:07   iconifying/deiconifying windows, moving and raising
31/07/2011 17:29:07   windows, and reposting menus.  In the simple CopyRect
31/07/2011 17:29:07   encoding scheme used (no compression) a huge amount
31/07/2011 17:29:07   of extra memory (20-100MB) is used on both the server and
31/07/2011 17:29:07   client sides.  This mode works with any VNC viewer.
31/07/2011 17:29:07   However, in most you can actually see the cached pixel
31/07/2011 17:29:07   data by scrolling down, so you need to re-adjust its size.
31/07/2011 17:29:07   See http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching.
31/07/2011 17:29:07   If this mode yields undesired behavior (poor response,
31/07/2011 17:29:07   painting errors, etc) it may be disabled via: '-ncache 0'
31/07/2011 17:29:07   You can press 3 Alt_L's (Left "Alt" key) in a row to 
31/07/2011 17:29:07   repaint the screen, also see the -fixscreen option for
31/07/2011 17:29:07   periodic repaints.
31/07/2011 17:29:07 
31/07/2011 17:29:07 XKEYBOARD: number of keysyms per keycode 6 is greater
31/07/2011 17:29:07   than 4 and 2 keysyms are mapped above 4.
31/07/2011 17:29:07   Automatically switching to -xkb mode.
31/07/2011 17:29:07   If this makes the key mapping worse you can
31/07/2011 17:29:07   disable it with the "-noxkb" option.
31/07/2011 17:29:07   Also, remember "-remap DEAD" for accenting characters.
31/07/2011 17:29:07 
31/07/2011 17:29:07 X FBPM extension not supported.
31/07/2011 17:29:07 X display is capable of DPMS.
31/07/2011 17:29:07 --------------------------------------------------------
31/07/2011 17:29:07 
31/07/2011 17:29:07 Default visual ID: 0x21
31/07/2011 17:29:07 Read initial data from X display into framebuffer.
31/07/2011 17:29:07 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/4096
31/07/2011 17:29:07 
31/07/2011 17:29:07 X display :0 is 32bpp depth=24 true color
31/07/2011 17:29:07 
31/07/2011 17:29:07 Autoprobing TCP port 
31/07/2011 17:29:07 Autoprobing selected port 5900
31/07/2011 17:29:07 listen6: socket: Address family not supported by protocol
31/07/2011 17:29:07 (Ignore the above error if this system is IPv4-only.)
31/07/2011 17:29:07 Not listening on IPv6 interface.
31/07/2011 17:29:07 
31/07/2011 17:29:07 Xinerama is present and active (e.g. multi-head).
31/07/2011 17:29:07 Xinerama: number of sub-screens: 1
31/07/2011 17:29:07 Xinerama: no blackouts needed (only one sub-screen)
31/07/2011 17:29:07 
31/07/2011 17:29:07 fb read rate: 628 MB/sec
31/07/2011 17:29:07 fast read: reset wait  ms to: 10
31/07/2011 17:29:07 fast read: reset defer ms to: 10
31/07/2011 17:29:07 The X server says there are 10 mouse buttons.
31/07/2011 17:29:07 screen setup finished.
31/07/2011 17:29:07 

The VNC desktop is:      grayza.home.digitalgoat.com:0
PORT=5900

31/07/2011 17:29:07 check_xrandr_event():
31/07/2011 17:29:07 Detected XRANDR event at location 'check_xevents':
31/07/2011 17:29:07 check_xrandr_event: no change detected.
31/07/2011 17:29:07 check_xrandr_event: enabling full XRANDR trapping anyway.
gnome-session[13806]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[13806]: WARNING: GsmSessionSave: could not create directory for saved session: /root/.config/gnome-session/saved-session
gnome-session[13806]: WARNING: Unable to find required component 'gnome-shell'
gnome-session[13806]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[13806]: WARNING: Unable to find required component 'gnome-settings-daemon'
gnome-session[13806]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[13806]: CRITICAL: gsm_manager_add_autostart_apps_from_dir: assertion `path != NULL' failed
GNOME_KEYRING_CONTROL=/tmp/keyring-C4O1iO
GNOME_KEYRING_PID=13838
Failed to create directory /root/.local/share: Permission denied

(gnome-settings-daemon:13823): keybindings-plugin-WARNING **: Key binding (screenreader) is incomplete

(gnome-settings-daemon:13823): keybindings-plugin-WARNING **: Key binding (magnifier) is incomplete

(gnome-settings-daemon:13823): keybindings-plugin-WARNING **: Key binding (onscreenkeyboard) is incomplete
GNOME_KEYRING_CONTROL=/tmp/keyring-C4O1iO
GPG_AGENT_INFO=/tmp/keyring-C4O1iO/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-C4O1iO
GPG_AGENT_INFO=/tmp/keyring-C4O1iO/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-C4O1iO/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-C4O1iO
GPG_AGENT_INFO=/tmp/keyring-C4O1iO/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-C4O1iO/ssh
socket(): Address family not supported by protocol
[1312147749,000,xklavier.c:xkl_engine_start_listen/]    The backend does not require manual layout management - but it is provided by the application

(gnome-settings-daemon:13823): GLib-CRITICAL **: g_dir_read_name: assertion `dir != NULL' failed

(gnome-settings-daemon:13823): GLib-CRITICAL **: g_dir_close: assertion `dir != NULL' failed
Failed to play sound: System error
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service
Failed to connect to the VirtualBox kernel service

(gdu-notification-daemon:13866): GduNotification-WARNING **: Error creating directory `/root/.config/gnome-disk-utility/ata-smart-ignore': Permission denied

(gnome-power-backlight-helper:13936): PowerManager-WARNING **: failed to find any devices: Error opening directory '/sys/class/backlight': No such file or directory

(gnome-power-manager:13863): libupower-glib-WARNING **: Couldn't enumerate devices: Message did not receive a reply (timeout by message bus)

PowerManager-ERROR **: failed to get device list: Message did not receive a reply (timeout by message bus)
aborting...
Loading configuration plugins
Using gconf config backend
Stale PID, overwriting
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/blueman/plugins/AppletPlugin.py", line 105, in _load
    self.on_load(applet)
  File "/usr/lib/python2.7/site-packages/blueman/plugins/applet/KillSwitch.py", line 52, in on_load
    raise Exception("Failed to initialize killswitch manager")
Exception: Failed to initialize killswitch manager
Deleting plugin instance <blueman.plugins.applet.KillSwitch.KillSwitch object at 0x856c3cc>
Using gconf config backend
Using gconf config backend
31/07/2011 17:29:25 Got connection from client 10.100.0.10
31/07/2011 17:29:25   other clients:
31/07/2011 17:29:25 Disabled X server key autorepeat.
31/07/2011 17:29:25   to force back on run: 'xset r on' (3 times)
31/07/2011 17:29:25 incr accepted_client=1 for 10.100.0.10:3717  sock=10
31/07/2011 17:29:25 Client Protocol Version 3.5
31/07/2011 17:29:25 Protocol version sent 3.5, using 3.5
31/07/2011 17:29:26 created   xdamage object: 0x400024
31/07/2011 17:29:27 client_set_net: 10.100.0.10  0.0010
31/07/2011 17:29:27 Pixel format for client 10.100.0.10:
31/07/2011 17:29:27   32 bpp, depth 24, little endian
31/07/2011 17:29:27   true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0
31/07/2011 17:29:27 no translation needed
31/07/2011 17:29:27 rfbProcessClientNormalMessage: ignoring unsupported encoding type Enc(0x00000003)
31/07/2011 17:29:27 Using hextile encoding for client 10.100.0.10
31/07/2011 17:29:27 client 1 network rate 1429.1 KB/sec (156313.5 eff KB/sec)
31/07/2011 17:29:27 client 1 latency:  0.6 ms
31/07/2011 17:29:27 dt1: 0.1853, dt2: 0.0565 dt3: 0.0006 bytes: 345118
31/07/2011 17:29:27 link_rate: LR_LAN - 1 ms, 1429 KB/s
31/07/2011 17:29:29 set_ncache_xrootpmap: loading background pixmap: 0x1800001
31/07/2011 17:29:35 created selwin: 0x400025
31/07/2011 17:29:35 called initialize_xfixes()

Offline

#9 2011-07-31 21:37:29

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: update to gnome 3 = frozen desktop with nvidia [solved]

FATAL: Module nouveau not found.

What config files are you using? Does your custom kernel have nouveau?

The log is talking something about x11vnc too.

Offline

#10 2011-07-31 22:36:24

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

The previous post was without an xorg.conf. I am using the stock Nvidia 275.21 driver, no nouveau. The first post shows the X output using the original config I used on the pre-pacman xorg/gnome setup. I am using x11vnc for remote desktop through xrdp. Here it is without xvnc and back to the old config. I also don't understand all the refrences to /root/ when I a, logged  in as a user.

X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH i686 
Current Operating System: Linux grayza.home.digitalgoat.com 2.6.30.4 #16 SMP Sat Jul 30 18:08:31 EDT 2011 i686
Kernel command line: root=/dev/sda2
Build Date: 09 July 2011  07:57:07AM
 
Current version of pixman: 0.22.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 31 18:35:19 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
gnome-session[14549]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[14549]: WARNING: GsmSessionSave: could not create directory for saved session: /root/.config/gnome-session/saved-session
gnome-session[14549]: WARNING: Unable to find required component 'gnome-shell'
gnome-session[14549]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[14549]: WARNING: Unable to find required component 'gnome-settings-daemon'
gnome-session[14549]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[14549]: CRITICAL: gsm_manager_add_autostart_apps_from_dir: assertion `path != NULL' failed
GNOME_KEYRING_CONTROL=/tmp/keyring-oFhyYw
GNOME_KEYRING_PID=14567
GNOME_KEYRING_CONTROL=/tmp/keyring-oFhyYw
GPG_AGENT_INFO=/tmp/keyring-oFhyYw/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-oFhyYw
GPG_AGENT_INFO=/tmp/keyring-oFhyYw/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-oFhyYw/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-oFhyYw
GPG_AGENT_INFO=/tmp/keyring-oFhyYw/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-oFhyYw/ssh

(gnome-settings-daemon:14566): keybindings-plugin-WARNING **: Key binding (screenreader) is incomplete

(gnome-settings-daemon:14566): keybindings-plugin-WARNING **: Key binding (magnifier) is incomplete

(gnome-settings-daemon:14566): keybindings-plugin-WARNING **: Key binding (onscreenkeyboard) is incomplete
Failed to create directory /root/.local/share: Permission denied
socket(): Address family not supported by protocol
=== auto configure Configuration ===
  Clone: false
  Output: Unknown attached to default
     status: on
     width: 1680
     height: 1050
     rate: 50
     primary: false
     position: 0 0
=== Applying Configuration Configuration ===
  Clone: false
  Output: Unknown attached to default
     status: on
     width: 1680
     height: 1050
     rate: 50
     primary: true
     position: 0 0
Failed to play sound: System error
[1312151720,000,xklavier.c:xkl_engine_start_listen/]    The backend does not require manual layout management - but it is provided by the application

(gnome-settings-daemon:14566): GLib-CRITICAL **: g_dir_read_name: assertion `dir != NULL' failed

(gnome-settings-daemon:14566): GLib-CRITICAL **: g_dir_close: assertion `dir != NULL' failed
Loading configuration plugins

(gdu-notification-daemon:14612): GduNotification-WARNING **: Error creating directory `/root/.config/gnome-disk-utility/ata-smart-ignore': Permission denied
Failed to connect to the VirtualBox kernel service
Using gconf config backend
Stale PID, overwriting
Failed to connect to the VirtualBox kernel service
Using gconf config backend
Failed to connect to the VirtualBox kernel service

(gnome-power-backlight-helper:14689): PowerManager-WARNING **: failed to find any devices: Error opening directory '/sys/class/backlight': No such file or directory
Failed to connect to the VirtualBox kernel service
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/blueman/plugins/AppletPlugin.py", line 105, in _load
    self.on_load(applet)
  File "/usr/lib/python2.7/site-packages/blueman/plugins/applet/KillSwitch.py", line 52, in on_load
    raise Exception("Failed to initialize killswitch manager")
Exception: Failed to initialize killswitch manager
Deleting plugin instance <blueman.plugins.applet.KillSwitch.KillSwitch object at 0x856c3cc>
Using gconf config backend
Using gconf config backend

(gnome-power-manager:14608): libupower-glib-WARNING **: Couldn't enumerate devices: Message did not receive a reply (timeout by message bus)

PowerManager-ERROR **: failed to get device list: Message did not receive a reply (timeout by message bus)
aborting...

Last edited by jayray (2011-07-31 22:39:00)

Offline

#11 2011-07-31 22:44:24

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Yes, I know the previous one was w/o xorg.conf, as it only said

(==) Using config directory: "/etc/X11/xorg.conf.d"

instead of

(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"

I was curious what special sauce do you have in /etc/X11/xorg.conf.d - if any.

The last log talks about VirtualBox

Failed to connect to the VirtualBox kernel service

I have no idea wha''s going on, sorry.

Offline

#12 2011-07-31 23:39:09

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Understand, have the following files in the xorg.conf.d
10-evdev.conf  10-quirks.conf  10-synaptics.conf  50-fpit.conf  50-joystick.conf  50-vboxmouse.conf  50-vmmouse.conf
I haven't reinstalled vbox since recompiling the kernel on the new gcc, thats that error.

Offline

#13 2011-08-01 02:47:39

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

New development... Swapped out the 7300 with a X1650 ati, and results are different not necessarily better. I get fallback mode with gnome, and I get kde to load 100%. So I think it was driver related. I think I'll keep the ati in for a while. Any suggestions to fix the fallback mode, and I still have no keyboard/mouse when running kde (works fine with icewm)?

Last edited by jayray (2011-08-01 22:41:16)

Offline

#14 2011-08-22 17:36:05

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

So I have went back to the factory nvidia drivers and upgraded to kernel 3.0 from pacman and still issues getting either KDE or GNOME to startup normally. I get a background at least with GNOME, but KDE stays frozen at the startup screen. At a loss... maybe I just need to live with ICEWM.
Console output:

\

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-ARCH i686 
Current Operating System: Linux grayza.home.digitalgoat.com 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686
Kernel command line: root=/dev/sda2 
Build Date: 08 August 2011  08:28:07AM
 
Current version of pixman: 0.22.2
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 22 13:33:13 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
gnome-session[32588]: CRITICAL: Unable to contact dconf service
gnome-session[32588]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[32588]: WARNING: GsmSessionSave: could not create directory for saved session: /root/.config/gnome-session/saved-session
gnome-session[32588]: WARNING: Unable to find required component 'gnome-shell'
gnome-session[32588]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[32588]: WARNING: Unable to find required component 'gnome-settings-daemon'
gnome-session[32588]: WARNING: GsmSessionSave: Failed to create directory /root/.config/gnome-session/saved-session: Permission denied
gnome-session[32588]: CRITICAL: gsm_manager_add_autostart_apps_from_dir: assertion `path != NULL' failed
GNOME_KEYRING_CONTROL=/tmp/keyring-Pfy9VI
GNOME_KEYRING_PID=32608

** (gsettings-data-convert:32604): CRITICAL **: Unable to contact dconf service
GNOME_KEYRING_CONTROL=/tmp/keyring-Pfy9VI
GPG_AGENT_INFO=/tmp/keyring-Pfy9VI/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-Pfy9VI
GPG_AGENT_INFO=/tmp/keyring-Pfy9VI/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-Pfy9VI
GPG_AGENT_INFO=/tmp/keyring-Pfy9VI/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-Pfy9VI/ssh

** (gnome-settings-daemon:32609): CRITICAL **: Unable to contact dconf service
Failed to create directory /root/.local/share: Permission denied

(gnome-settings-daemon:32609): keybindings-plugin-WARNING **: Key binding (screenreader) is incomplete

(gnome-settings-daemon:32609): keybindings-plugin-WARNING **: Key binding (magnifier) is incomplete

(gnome-settings-daemon:32609): keybindings-plugin-WARNING **: Key binding (onscreenkeyboard) is incomplete
=== auto configure Configuration ===
  Clone: false
  Output: Unknown attached to default
     status: on
     width: 1680
     height: 1050
     rate: 50
     primary: false
     position: 0 0
=== Applying Configuration Configuration ===
  Clone: false
  Output: Unknown attached to default
     status: on
     width: 1680
     height: 1050
     rate: 50
     primary: true
     position: 0 0
[1314034395,000,xklavier.c:xkl_engine_start_listen/]    The backend does not require manual layout management - but it is provided by the application

** (gnome-screensaver:32647): CRITICAL **: Unable to contact dconf service
Failed to play sound: System error

** (gnome-power-manager:32652): CRITICAL **: Unable to contact dconf service

(gdu-notification-daemon:32653): GduNotification-WARNING **: Error creating directory `/root/.config/gnome-disk-utility/ata-smart-ignore': Permission denied
Loading configuration plugins
Using gconf config backend
Stale PID, overwriting
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Using gconf config backend
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/blueman/plugins/AppletPlugin.py", line 105, in _load
    self.on_load(applet)
  File "/usr/lib/python2.7/site-packages/blueman/plugins/applet/KillSwitch.py", line 52, in on_load
    raise Exception("Failed to initialize killswitch manager")
Exception: Failed to initialize killswitch manager
Deleting plugin instance <blueman.plugins.applet.KillSwitch.KillSwitch object at 0x991238c>
Using gconf config backend
Using gconf config backend

Xorg.0.log 

[ 54362.198] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 54362.199] 
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 54362.199] X Protocol Version 11, Revision 0
[ 54362.199] Build Operating System: Linux 3.0.0-ARCH i686 
[ 54362.199] Current Operating System: Linux grayza.home.digitalgoat.com 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686
[ 54362.199] Kernel command line: root=/dev/sda2 
[ 54362.199] Build Date: 08 August 2011  08:28:07AM
[ 54362.199]  
[ 54362.199] Current version of pixman: 0.22.2
[ 54362.199]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[ 54362.200] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 54362.200] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 22 13:33:13 2011
[ 54362.200] (==) Using config file: "/etc/X11/xorg.conf"
[ 54362.200] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 54362.201] (==) ServerLayout "Default Layout"
[ 54362.201] (**) |-->Screen "Screen0" (0)
[ 54362.201] (**) |   |-->Monitor "Monitor0"
[ 54362.201] (**) |   |-->Device "Card0"
[ 54362.201] (**) |-->Input Device "Keyboard0"
[ 54362.201] (**) |-->Input Device "Mouse0"
[ 54362.201] (==) Automatically adding devices
[ 54362.201] (==) Automatically enabling devices
[ 54362.201] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 54362.201]    Entry deleted from font path.
[ 54362.201] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[ 54362.201] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 54362.201] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 54362.201] (WW) Disabling Keyboard0
[ 54362.201] (WW) Disabling Mouse0
[ 54362.201] (II) Loader magic: 0x822e4e0
[ 54362.201] (II) Module ABI versions:
[ 54362.201]    X.Org ANSI C Emulation: 0.4
[ 54362.201]    X.Org Video Driver: 10.0
[ 54362.201]    X.Org XInput driver : 12.2
[ 54362.201]    X.Org Server Extension : 5.0
[ 54362.202] (--) PCI:*(0:1:0:0) 10de:01d1:1462:0274 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 54362.202] (II) Open ACPI successful (/var/run/acpid.socket)
[ 54362.202] (II) LoadModule: "extmod"
[ 54362.202] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 54362.202] (II) Module extmod: vendor="X.Org Foundation"
[ 54362.202]    compiled for 1.10.3.901, module version = 1.0.0
[ 54362.202]    Module class: X.Org Server Extension
[ 54362.202]    ABI class: X.Org Server Extension, version 5.0
[ 54362.202] (II) Loading extension MIT-SCREEN-SAVER
[ 54362.202] (II) Loading extension XFree86-VidModeExtension
[ 54362.202] (II) Loading extension XFree86-DGA
[ 54362.202] (II) Loading extension DPMS
[ 54362.202] (II) Loading extension XVideo
[ 54362.202] (II) Loading extension XVideo-MotionCompensation
[ 54362.202] (II) Loading extension X-Resource
[ 54362.202] (II) LoadModule: "dbe"
[ 54362.202] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 54362.202] (II) Module dbe: vendor="X.Org Foundation"
[ 54362.202]    compiled for 1.10.3.901, module version = 1.0.0
[ 54362.203]    Module class: X.Org Server Extension
[ 54362.203]    ABI class: X.Org Server Extension, version 5.0
[ 54362.203] (II) Loading extension DOUBLE-BUFFER
[ 54362.203] (II) LoadModule: "glx"
[ 54362.203] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 54362.324] (II) Module glx: vendor="NVIDIA Corporation"
[ 54362.324]    compiled for 4.0.2, module version = 1.0.0
[ 54362.324]    Module class: X.Org Server Extension
[ 54362.324] (II) NVIDIA GLX Module  280.13  Wed Jul 27 17:14:51 PDT 2011
[ 54362.324] (II) Loading extension GLX
[ 54362.324] (II) LoadModule: "record"
[ 54362.324] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 54362.324] (II) Module record: vendor="X.Org Foundation"
[ 54362.324]    compiled for 1.10.3.901, module version = 1.13.0
[ 54362.324]    Module class: X.Org Server Extension
[ 54362.324]    ABI class: X.Org Server Extension, version 5.0
[ 54362.324] (II) Loading extension RECORD
[ 54362.324] (II) LoadModule: "dri"
[ 54362.325] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 54362.325] (II) Module dri: vendor="X.Org Foundation"
[ 54362.325]    compiled for 1.10.3.901, module version = 1.0.0
[ 54362.325]    ABI class: X.Org Server Extension, version 5.0
[ 54362.325] (II) Loading extension XFree86-DRI
[ 54362.325] (II) LoadModule: "dri2"
[ 54362.325] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 54362.325] (II) Module dri2: vendor="X.Org Foundation"
[ 54362.325]    compiled for 1.10.3.901, module version = 1.2.0
[ 54362.325]    ABI class: X.Org Server Extension, version 5.0
[ 54362.325] (II) Loading extension DRI2
[ 54362.325] (II) LoadModule: "nvidia"
[ 54362.325] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 54362.325] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 54362.325]    compiled for 4.0.2, module version = 1.0.0
[ 54362.325]    Module class: X.Org Video Driver
[ 54362.325] (II) NVIDIA dlloader X Driver  280.13  Wed Jul 27 16:57:12 PDT 2011
[ 54362.325] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 54362.325] (--) using VT number 8

[ 54362.327] (II) Loading sub module "fb"
[ 54362.327] (II) LoadModule: "fb"
[ 54362.328] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 54362.328] (II) Module fb: vendor="X.Org Foundation"
[ 54362.328]    compiled for 1.10.3.901, module version = 1.0.0
[ 54362.328]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 54362.328] (II) Loading sub module "wfb"
[ 54362.328] (II) LoadModule: "wfb"
[ 54362.328] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 54362.328] (II) Module wfb: vendor="X.Org Foundation"
[ 54362.328]    compiled for 1.10.3.901, module version = 1.0.0
[ 54362.328]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 54362.328] (II) Loading sub module "ramdac"
[ 54362.328] (II) LoadModule: "ramdac"
[ 54362.328] (II) Module "ramdac" already built-in
[ 54362.328] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 54362.328] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 54362.328] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 54362.328] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 54362.328] (==) NVIDIA(0): RGB weight 888
[ 54362.328] (==) NVIDIA(0): Default visual is TrueColor
[ 54362.328] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 54362.328] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
[ 54362.400] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 54362.402] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:1:0:0 (GPU-0)
[ 54362.402] (--) NVIDIA(0): Memory: 524288 kBytes
[ 54362.402] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.32
[ 54362.402] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 54362.402] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 54362.402] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:1:0:0
[ 54362.402] (--) NVIDIA(0):     CRT-0
[ 54362.402] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 54362.402] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[ 54362.402] (**) NVIDIA(0):     enabled on all display devices.
[ 54362.402] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 54362.402] (II) NVIDIA(0): Validated modes:
[ 54362.402] (II) NVIDIA(0):     "1680x1050"
[ 54362.402] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 54362.403] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 54362.403] (WW) NVIDIA(0):     from CRT-0's EDID.
[ 54362.403] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 54362.403] (--) Depth 24 pixmap format is 32 bpp
[ 54362.408] (II) NVIDIA(0): Setting mode "1680x1050"
[ 54362.486] (II) Loading extension NV-GLX
[ 54362.504] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 54362.504] (==) NVIDIA(0): Backing store disabled
[ 54362.504] (==) NVIDIA(0): Silken mouse enabled
[ 54362.504] (**) NVIDIA(0): DPMS enabled
[ 54362.504] (II) Loading extension NV-CONTROL
[ 54362.505] (II) Loading extension XINERAMA
[ 54362.505] (WW) NVIDIA(0): Option "DynamicPM" is not used
[ 54362.505] (WW) NVIDIA(0): Option "ClockGating" is not used
[ 54362.505] (WW) NVIDIA(0): Option "PixmapCacheSize" is not used
[ 54362.505] (II) Loading sub module "dri2"
[ 54362.505] (II) LoadModule: "dri2"
[ 54362.505] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 54362.505] (II) Module dri2: vendor="X.Org Foundation"
[ 54362.505]    compiled for 1.10.3.901, module version = 1.2.0
[ 54362.505]    ABI class: X.Org Server Extension, version 5.0
[ 54362.505] (II) NVIDIA(0): [DRI2] Setup complete
[ 54362.505] (==) RandR enabled
[ 54362.505] (II) Initializing built-in extension Generic Event Extension
[ 54362.505] (II) Initializing built-in extension SHAPE
[ 54362.505] (II) Initializing built-in extension MIT-SHM
[ 54362.505] (II) Initializing built-in extension XInputExtension
[ 54362.505] (II) Initializing built-in extension XTEST
[ 54362.505] (II) Initializing built-in extension BIG-REQUESTS
[ 54362.505] (II) Initializing built-in extension SYNC
[ 54362.505] (II) Initializing built-in extension XKEYBOARD
[ 54362.505] (II) Initializing built-in extension XC-MISC
[ 54362.505] (II) Initializing built-in extension SECURITY
[ 54362.505] (II) Initializing built-in extension XINERAMA
[ 54362.505] (II) Initializing built-in extension XFIXES
[ 54362.505] (II) Initializing built-in extension RENDER
[ 54362.505] (II) Initializing built-in extension RANDR
[ 54362.505] (II) Initializing built-in extension COMPOSITE
[ 54362.505] (II) Initializing built-in extension DAMAGE
[ 54362.508] (II) Initializing extension GLX
[ 54362.615] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 54362.615] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54362.615] (II) LoadModule: "evdev"
[ 54362.615] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54362.616] (II) Module evdev: vendor="X.Org Foundation"
[ 54362.616]    compiled for 1.10.0, module version = 2.6.0
[ 54362.616]    Module class: X.Org XInput Driver
[ 54362.616]    ABI class: X.Org XInput driver, version 12.2
[ 54362.616] (II) Using input driver 'evdev' for 'Power Button'
[ 54362.616] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54362.616] (**) Power Button: always reports core events
[ 54362.616] (**) Power Button: Device: "/dev/input/event2"
[ 54362.616] (--) Power Button: Found keys
[ 54362.616] (II) Power Button: Configuring as keyboard
[ 54362.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 54362.616] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 54362.616] (**) Option "xkb_rules" "evdev"
[ 54362.616] (**) Option "xkb_model" "evdev"
[ 54362.616] (**) Option "xkb_layout" "us"
[ 54362.641] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 54362.641] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 54362.641] (II) Using input driver 'evdev' for 'Power Button'
[ 54362.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54362.641] (**) Power Button: always reports core events
[ 54362.641] (**) Power Button: Device: "/dev/input/event1"
[ 54362.641] (--) Power Button: Found keys
[ 54362.641] (II) Power Button: Configuring as keyboard
[ 54362.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 54362.641] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 54362.641] (**) Option "xkb_rules" "evdev"
[ 54362.641] (**) Option "xkb_model" "evdev"
[ 54362.641] (**) Option "xkb_layout" "us"
[ 54362.642] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 54362.642] (II) No input driver/identifier specified (ignoring)
[ 54362.644] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event5)
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 54362.644] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[ 54362.644] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
[ 54362.644] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[ 54362.644] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 54362.644] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[ 54362.644] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 54362.644] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 54362.644] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 54362.644] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input5/event5"
[ 54362.644] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[ 54362.644] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 54362.644] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 54362.644] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 54362.644] (II) No input driver/identifier specified (ignoring)
[ 54362.649] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 54362.649] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 54362.649] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 54362.649] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 54362.649] (**) AT Translated Set 2 keyboard: always reports core events
[ 54362.649] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 54362.649] (--) AT Translated Set 2 keyboard: Found keys
[ 54362.649] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 54362.649] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 54362.649] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 54362.649] (**) Option "xkb_rules" "evdev"
[ 54362.649] (**) Option "xkb_model" "evdev"
[ 54362.649] (**) Option "xkb_layout" "us"
[ 54362.649] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 54362.649] (II) No input driver/identifier specified (ignoring)
[ 54401.824] (II) Power Button: Close
[ 54401.824] (II) UnloadModule: "evdev"
[ 54401.824] (II) Unloading evdev
[ 54401.837] (II) Power Button: Close
[ 54401.838] (II) UnloadModule: "evdev"
[ 54401.838] (II) Unloading evdev
[ 54401.854] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
[ 54401.854] (II) UnloadModule: "evdev"
[ 54401.854] (II) Unloading evdev
[ 54401.877] (II) AT Translated Set 2 keyboard: Close
[ 54401.878] (II) UnloadModule: "evdev"
[ 54401.878] (II) Unloading evdev

Last edited by jayray (2011-08-22 17:39:13)

Offline

#15 2011-08-23 00:18:01

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Can a mod move this to "Applications & Desktop Environments"?
Thanks,
J

Offline

#16 2011-08-23 03:38:15

fsckd
Forum Fellow
Registered: 2009-06-15
Posts: 4,173

Re: update to gnome 3 = frozen desktop with nvidia [solved]

jayray wrote:

Can a mod move this to "Applications & Desktop Environments"?
Thanks,
J

Done. Next time, for such issues, please do not use posts to call on the Moderators' attention. Use the report button which is more certain to be noticed quickly.

aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies

Offline

#17 2011-08-23 20:29:16

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

Anyone have any suggestions on where to go next? If I were to remove Xorg completely and reinstall what would be left over config wise that would need to be removed in order to do a "fresh install"
Thanks
J

Offline

#18 2011-08-27 12:33:06

jayray
Member
Registered: 2006-10-15
Posts: 38

Re: update to gnome 3 = frozen desktop with nvidia [solved]

So after fighting with this for over a month, I went to nouveau drivers 100%, did a Suy with a new kernel, and all is working.

Offline

Pages: 1

Board footer

Powered by FluxBB