You are not logged in.
mind sharing your conkyrc @ Deciare?
Offline
Offline
flamelab wrote:Deciare wrote:Finally having gotten over the ;_; of forfeiting 22x22 panel icons, tint2 is now on top. Another 3 pixels of vertical space saved!
Clean:
http://i81.photobucket.com/albums/j239/Deciare/Screenshots/th_desktop-leaff-20110829.png
Dirty:
http://i81.photobucket.com/albums/j239/Deciare/Screenshots/th_desktop-leaff-20110829-dirty.png
Oh excellent fonts !! how did you manage that ?
Unhinted, LCD filtered fonts.
My ~/.fonts.conf file: http://www.isisview.org/~deciare/not_music/.fonts.conf
You may also need the libxft-lcd package from AUR.
There's also~ the fontconfig-lcd package from AUR that applies the lcdfilter rule globally, but KDE applications ignore that for some reason, so I wind up applying it locally anyway.The fonts in the screenshot are Liberation Sans (9.5 pt for the taskbar and titlebars, 10 pt elsewhere) and Droid Sans (7.5 pt, 7 pt, and 10 pt for the battery %, time remaining, and clock, respectively).
I've always loved the smooth, full-bodied look of fully unhinted fonts. ^_^
Greattt!! thank you !!
Offline
Very good!! How did you obtain info in the prompt? Mind sharing wall?
Offline
Wonderful colors!! Can u share them? The panel il tint2? Can you share it too? Thanks
Offline
finwin wrote:Wonderful colors!! Can u share them? The panel il tint2? Can you share it too? Thanks
URxvt*background: #000000
URxvt*foreground: #717171
!Black
URxvt*color0: #3d3e3d
URxvt*color8: #5a5b5c
!Red
URxvt*color1: #755a5b
URxvt*color9: #a37679
!Green
URxvt*color2: #68755a
URxvt*color10: #87a376
!Yellow
URxvt*color3: #756e5a
URxvt*color11: #a39b76
!Blue
URxvt*color4: #5b6976
URxvt*color12: #758ba3
!Magenta
URxvt*color5: #755b76
URxvt*color13: #9f76a3
!Cyan
URxvt*color6: #5b7674
URxvt*color14: #75a3a1
!White
URxvt*color7: #808080
URxvt*color15: #aeafb0
that panel is pypanel
VERSION = 2.4 # Config file version
#------------------------------------------------------------------------------
# Colors: Format is hex triplet - 0xrrggbb
#------------------------------------------------------------------------------
BG_COLOR = "0x000000" # Panel background and tinting color
TASK_COLOR = "0x303030" # Normal task name color
FOCUSED_COLOR = "0x757575" # Focused task name color
SHADED_COLOR = "0x303030" # Shaded task name color
MINIMIZED_COLOR = "0x303030" # Minimized task name color
DESKTOP_COLOR = "0x757575" # Desktop name color
CLOCK_COLOR = "0x757575" # Clock text color
LINE_COLOR = "0x303030" # Vertical line color
# Text Shadow Colors
TASK_SHADOW_COLOR = "0x000000"
FOCUSED_SHADOW_COLOR = "0x000000"
SHADED_SHADOW_COLOR = "0x000000"
MINIMIZED_SHADOW_COLOR = "0x000000"
DESKTOP_SHADOW_COLOR = "0x000000"
CLOCK_SHADOW_COLOR = "0x000000"
#------------------------------------------------------------------------------
# Panel Spacing and Location Options: Measured in pixels
#------------------------------------------------------------------------------
P_LOCATION = 1 # Panel placement: 0 = top, 1 = bottom
P_WIDTH = 0 # Panel width: 0 = Use full screen width
P_START = 0 # Starting X coordinate of the panel
P_SPACER = 6 # Spacing between panel objects
P_HEIGHT = 16 # Panel height
#------------------------------------------------------------------------------
# Icon Size Options: Measured in pixels
#------------------------------------------------------------------------------
I_HEIGHT = 15 # Panel application icon height
I_WIDTH = 15 # Panel application icon Width
APPL_I_HEIGHT = 15 # Application launcher icon height
APPL_I_WIDTH = 15 # Application launcher icon width
TRAY_I_HEIGHT = 15 # System tray icon height (usually 16 or 24)
TRAY_I_WIDTH = 15 # System tray icon width (usually 16 or 24)
# If TRAY_I_WIDTH is set to 0, then the
# width specified by the tray app will be used
#------------------------------------------------------------------------------
# Panel Clock Format: 'man strftime' for detailed formatting options and help
#------------------------------------------------------------------------------
CLOCK_FORMAT = "%Y-%m-%d %H:%M" # Ex: 2004-09-25 17:45
#------------------------------------------------------------------------------
# Clock Delay: Seconds between each clock update during periods of inactivity
#------------------------------------------------------------------------------
CLOCK_DELAY = 20
#------------------------------------------------------------------------------
# Hidden Application List: Apps listed here will not be display on the panel
# The application name is its WM_CLASS name, use 'xprop' to find WM_CLASS
# Ex: ["xmms", "xine", "gDesklets"]
#------------------------------------------------------------------------------
HIDE_LIST = []
#------------------------------------------------------------------------------
# Hidden Panel Size: Size of the panel when it's hidden/minimized
#------------------------------------------------------------------------------
HIDDEN_SIZE = 2
#------------------------------------------------------------------------------
# Panel Text Font: This option takes either a traditional or Xft font string
# Ex: "-schumacher-clean-medium-r-normal-*-12-*-*-*-*-*-*-*"
# "aquafont-8"
#------------------------------------------------------------------------------
FONT = "fixed-8"
#------------------------------------------------------------------------------
# Show All Applications: Show apps from all desktops or just the current
# 0: Disabled - Only applications on the current desktop will be displayed
# 1: Enabled - Selected apps are moved to the current desktop
# 2: Enabled - Current desktop is changed to the selected apps desktop
#------------------------------------------------------------------------------
SHOWALL = 0 # 0, 1 or 2 - see descriptions above
#------------------------------------------------------------------------------
# Show Minimized/Iconified Applications: Show only minimized apps or all apps
# 0: Disabled - Show all applications on the panel
# 1: Enabled - Show only minimized apps on the panel
#------------------------------------------------------------------------------
SHOWMINIMIZED = 0
#------------------------------------------------------------------------------
# Application Icon List: List of custom icons for specific applications
# The application name is its WM_CLASS name, use 'xprop' to find WM_CLASS
#
# The "default" entry is used for applications with no icon. If left "",
# PyPanel will use the default icon distributed with the source.
#
# Add entries using the following format -
# "<application name>" : "<full path to icon>",
#------------------------------------------------------------------------------
ICON_LIST = {
"default" : "",
"example" : "/usr/share/imlib2/data/images/audio.png",
}
#------------------------------------------------------------------------------
# Application Launch List: Ordered list of icons and applications for the
# application launcher.
#
# Add entries using the following format -
# ("<executable>", "<full path to icon>")
#------------------------------------------------------------------------------
LAUNCH_LIST = [
("gimp-2.2", "/usr/share/imlib2/data/images/paper.png"),
]
#------------------------------------------------------------------------------
# Background Alpha/Shade Level: 0 (Fully Translucent) -> 255 (Fully Opaque)
# BG_COLOR is used for tinting
#------------------------------------------------------------------------------
SHADE = 255
#------------------------------------------------------------------------------
# Misc. Options: 1 = Enabled/Yes, 0 = Disabled/No
#------------------------------------------------------------------------------
ABOVE = 1 # Panel is always above other apps
APPICONS = 0 # Show application icons
AUTOHIDE = 0 # Autohide uses the CLOCK_DELAY timer above
SHADOWS = 0 # Show text shadows
SHOWLINES = 1 # Show object seperation lines
SHOWBORDER = 0 # Show a border around the panel
#------------------------------------------------------------------------------
# Desktop Names: Configure the names of your desktops
# If the option is [], PyPanel will attempt to use the desktop name specified
# by the XServer, if that fails it will use the desktop number as its name
# Ex. ["One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight"]
#------------------------------------------------------------------------------
DESKTOP_NAMES = ["1", "2", "3",]
#------------------------------------------------------------------------------
# Panel Layout: -----------------------------------
# [ 1 ][ 2 ][ 3 ][ 4 ][ 5 ]
# -----------------------------------
#
# The panel layout is split into 5 sections numbered 1, 2, 3, 4 or 5 as shown
# in the diagram above. Each of the following objects can be enabled by
# assigning it a section number or disabled by assigning it 0:
#------------------------------------------------------------------------------
DESKTOP = 1 # Desktop name section
TASKS = 2 # Task names section
TRAY = 3 # System tray section
CLOCK = 4 # Clock section
LAUNCHER = 0 # Application launcher section
#------------------------------------------------------------------------------
# Button Event Function Definitions
#------------------------------------------------------------------------------
# Left click - button 1
# Middle click - button 2
# Right click - button 3
# Wheel up - button 4
# Wheel down - button 5
#
# changeDesktop(x)
# - Change Desktop: Increase or decrease the current desktop by 'x' amount
#
# toggleShade(task)
# - Shade or Unshade an application
#
# toggleHidden()
# - Minimize the panel to the top or bottom depending on its start location
#
# toggleMinimize(task, traise=1)
# - Minimize or Unminimize an application and optionally raise it
#
# taskRaise(task, focus=1)
# - Raise an application to the top of the window list and optionally focus it
#
# taskLower(task, focus=0)
# - Lower an app to the bottom of the window list and optionally focus it
#
# taskFocus(task)
# - Give focus to the selected application, if it has focus then minimize it
#
# showDesktop()
# - Toggle between hiding and unhiding ALL applications
#------------------------------------------------------------------------------
#----------------------------------
def desktopButtonEvent(pp, button):
#----------------------------------
""" Button event handler for the panel's desktop object """
if button == 1:
pp.changeDesktop(-1)
elif button == 2:
pp.changeDesktop(2)
elif button == 3:
pp.changeDesktop(1)
elif button == 4:
pp.changeDesktop(1)
elif button == 5:
pp.changeDesktop(-1)
#--------------------------------
def clockButtonEvent(pp, button):
#--------------------------------
""" Button event handler for the panel's clock object """
if button == 1:
os.system("xclock &")
elif button == 2:
pass
elif button == 3:
pp.toggleHidden()
elif button == 4:
pp.showDesktop()
elif button == 5:
pp.showDesktop()
#--------------------------------
def panelButtonEvent(pp, button):
#--------------------------------
""" Button event handler for the panel with no active tasks """
if button == 1:
pass
elif button == 2:
pass
elif button == 3:
pass
elif button == 4:
pass
elif button == 5:
pass
#-------------------------------------
def taskButtonEvent(pp, button, task):
#-------------------------------------
""" Button event handler for the panel's tasks """
if button == 1:
pp.taskFocus(task)
pp.taskFocus(task)
elif button == 2:
# Destroy the application
task.obj.destroy()
elif button == 3:
# Ex. - XMMS doesn't shade, so we want to minimize it instead and
# still use button 3 to shade other applications
# task.tclass is the tasks class name (WM_CLASS)
if "xmms" in task.tclass:
pp.toggleMinimize(task)
else:
pp.toggleShade(task)
elif button == 4:
pp.taskRaise(task, focus=1)
elif button == 5:
pp.taskLower(task, focus=0)
Offline
Colors from trapd00r here : https://github.com/trapd00r/configs/blo … Xresources
Font : montecarlo 9
Is it enough ?
Yes, thank you!
If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres
Offline
@finwin: thanks for sharing, but i meant vim colors sorry :blush:
Offline
mind sharing your conkyrc @ Deciare?
Here you go: www.isisview.org/~deciare/not_music/conky.tar.xz
Offline
Offline
still scrotwm (does anybody know how to fix archey3?)
Clean
http://s4.postimage.org/1jtsggan8/2011_08_30_213852_1280x1024_scrot.pngDirty
http://s4.postimage.org/1jtu3zn50/2011_08_30_213843_1280x1024_scrot.pngTiled
http://s4.postimage.org/1jtvrizms/2011_08_30_213040_1280x1024_scrot.png
would you mind to share your scrotwm.conf and the status bar ( conky?)
Offline
Doomcide wrote:still scrotwm (does anybody know how to fix archey3?)
Clean
http://s4.postimage.org/1jtsggan8/2011_08_30_213852_1280x1024_scrot.pngDirty
http://s4.postimage.org/1jtu3zn50/2011_08_30_213843_1280x1024_scrot.pngTiled
http://s4.postimage.org/1jtvrizms/2011_08_30_213040_1280x1024_scrot.pngwould you mind to share your scrotwm.conf and the status bar ( conky?)
Not at all
Offline
My minimal openbox
Offline
My pure evil
Offline
Offline
what plasma theme are you using there?
Offline
Doomcide wrote:still scrotwm (does anybody know how to fix archey3?)
Just change "None" to scrotwm in /usr/bin/archey3 (or what it can be).
Thanks, that worked. But I can't get editor to work, already tried to set the enviroment-variable....
Offline
FontForge and the Broccoli:
Offline
Could you post that pacman script?
Offline
Unia wrote:Could you post that pacman script?
#!/bin/sh
# ANSI Color -- use these variables to easily have different color
# and format output. Make sure to output the reset sequence after
# colors (f = foreground, b = background), and use the 'off'
# feature for anything you turn on.
initializeANSI()
{
esc=""
blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
cyanf="${esc}[36m"; whitef="${esc}[37m"
blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
cyanb="${esc}[46m"; whiteb="${esc}[47m"
boldon="${esc}[1m"; boldoff="${esc}[22m"
italicson="${esc}[3m"; italicsoff="${esc}[23m"
ulon="${esc}[4m"; uloff="${esc}[24m"
invon="${esc}[7m"; invoff="${esc}[27m"
reset="${esc}[0m"
}
# note in this first use that switching colors doesn't require a reset
# first - the new color overrides the old one.
#clear
initializeANSI
cat << EOF
${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
EOF
If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres
Offline