Arch Linux

mark86

Member

Registered: 2011-09-02

Posts: 2

Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

Hi,

Have just upgraded system using Asus M5A97EVO M/B and installed Arch 64.

Board has USB 2 and 3 ports and only the USB 3 ports are working under Arch. Below is the output of dmesg when I plug a keyboard into one of the USB 2 ports.

[mark@myhost ~]$ dmesg | grep -i usb
[    1.767008] usbcore: registered new interface driver usbfs
[    1.767026] usbcore: registered new interface driver hub
[    1.767107] usbcore: registered new device driver usb
[    1.771651] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    1.775037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.782918] hub 1-0:1.0: USB hub found
[    1.782978] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    1.783060] hub 2-0:1.0: USB hub found
[    1.783264] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.788555] hub 3-0:1.0: USB hub found
[    1.788610] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.788687] hub 4-0:1.0: USB hub found
[    1.788730] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[    1.800102] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.800185] hub 5-0:1.0: USB hub found
[    1.800305] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[    1.810092] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.810174] hub 6-0:1.0: USB hub found
[    1.810294] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
[    1.820093] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.820171] hub 7-0:1.0: USB hub found
[    1.883473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.883933] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
[    1.940848] hub 8-0:1.0: USB hub found
[    1.940970] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 9
[    1.997505] hub 9-0:1.0: USB hub found
[    1.997623] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 10
[    2.054178] hub 10-0:1.0: USB hub found
[    2.054292] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 11
[    2.110836] hub 11-0:1.0: USB hub found
[    2.146744] usb 3-1: new low speed USB device number 2 using xhci_hcd
[    2.167663] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.289310] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb3/3-1/3-1:1.0/input/input1
[    2.289357] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:04:00.0-1/input0
[    2.289367] usbcore: registered new interface driver usbhid
[    2.289369] usbhid: USB HID core driver
[    2.330096] usb 3-2: new low speed USB device number 3 using xhci_hcd
[    2.355929] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.361233] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb3/3-2/3-2:1.0/input/input2
[    2.361268] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:04:00.0-2/input0
[ 1380.073835] usb 3-2: USB disconnect, device number 3
[ 1386.026598] usb 9-1: new low speed USB device number 2 using ohci_hcd
[ 1386.159925] usb 9-1: device descriptor read/64, error -32
[ 1386.396588] usb 9-1: device descriptor read/64, error -32
[ 1386.629920] usb 9-1: new low speed USB device number 3 using ohci_hcd
[ 1386.763253] usb 9-1: device descriptor read/64, error -32
[ 1386.999921] usb 9-1: device descriptor read/64, error -32
[ 1387.233253] usb 9-1: new low speed USB device number 4 using ohci_hcd
[ 1387.639920] usb 9-1: device not accepting address 4, error -32
[ 1387.769920] usb 9-1: new low speed USB device number 5 using ohci_hcd
[ 1388.176585] usb 9-1: device not accepting address 5, error -32
[ 1388.176617] hub 9-0:1.0: unable to enumerate USB device on port 1

[mark@myhost ~]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)
00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E)
00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F)
00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G)
00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB Controller: Device 1b21:1042
03:00.0 SATA controller: JMicron Technology Corp. JMB362 AHCI Controller (rev 10)
04:00.0 USB Controller: Device 1b21:1042
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe (rev 10)
06:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)

As for the NIC the device is found and I can set address and enable it however it will not send or receive data?

Thanks

Mark

ewaller

Administrator

From: Pasadena, CA

Registered: 2009-07-13

Posts: 19,774

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

As for the NIC the device is found and I can set address and enable it however it will not send or receive data?

No clues on the USB, sorry.

As to the network...
How did you set the address?
What are the outputs of:
ip addr
and of
ip route
??

Last edited by ewaller (2011-09-02 02:20:20)

---

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

lilsirecho

Veteran

Registered: 2003-10-24

Posts: 5,000

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

Perhaps you can try connecting the keyboard to another port, even to a 3.0 port and find out what happens then?

---

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

mark86

Member

Registered: 2011-09-02

Posts: 2

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

I tried to configure the network statically using ifconfig and also tried dhcpcd. Neither work.

Network is fine if I use a broadcom PCI-E card just the onboard which doesn't work.

The keyboard is working fine on USB 3 ports it's just the USB 2 ports that don't work. They all work fine under Windows.

Is there a better forum to find help since these are probably not arch specific issues?

Thanks.

laloch

Member

Registered: 2010-02-04

Posts: 186

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

Is there a better forum to find help since these are probably not arch specific issues?

The Arch wiki and support forums might be the best places to search for help.

What is the output of

ip link

with cable (and some device of course ) connected to the onboard NIC?

cantrop

Member

Registered: 2011-10-05

Posts: 1

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

Hi,
I have the same board and the same problems - although using ubuntu...
If you haven't found out yet: the NIC is only working with the REALTEK vendor driver.
But I have no clue for the USB2 Problem - Did you find a solution yet (another driver, linux-3.1 kernel - anything)?

capeta

Member

From: Minas Gerais, Brazil

Registered: 2007-08-13

Posts: 8

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

I have this board too, for the NIC problem use this driver http://aur.archlinux.org/packages.php?ID=27000.
I don't have any others problems. Using Arch 64, stock kernel.

jeisom

Member

Registered: 2011-11-19

Posts: 3

Re: Asus M5A97 EVO - USB 2.0 and onboard NIC not working.

Hey Mark
   You didn't happen to change the IOMMU setting in the UEFI did you?  I have just got a M5A97 EVO and been having problems.
This UEFI interface finds the usb devices fine but the kernel will not.  I found that if I flash the bios it reset things and appears to
just compare the flash if it is the same.  Afterwards the usb works. However I still trying to narrow it down myself.  I've tested with
0402 0810 & 0813 just released. All do the same thing with regards to usb 2.0.

Jonathan

EDIT:
After testing it appears to be connected to the linux nvidia blob & IOMMU settings conflicting.

Last edited by jeisom (2011-11-23 15:00:00)