You are not logged in.

Pages: 1

#1 2011-09-03 15:29:49

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

[Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

Hi,

I've got the very similar issue that has been reported several times on this forum (e.g https://bbs.archlinux.org/viewtopic.php?id=124032 https://bbs.archlinux.org/viewtopic.php?id=124999) (kernel panic and init not found). Unfortunately, none of the solution works for me.


Result of parted -l :

Model: ATA IC35L120AVV207-1 (scsi)
Disk /dev/sda: 124GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End    Size   Type      File system  Flags
 3      1049kB  124GB  124GB  extended
 5      2097kB  124GB  124GB  logical   ext4


Model: ATA SAMSUNG HD040GJ (scsi)
Disk /dev/sdb: 40.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  161MB   160MB   primary   ext2
 2      161MB   40.0GB  39.8GB  extended
 5      163MB   1236MB  1074MB  logical   linux-swap(v1)
 6      1237MB  11.9GB  10.6GB  logical   ext4
 7      11.9GB  40.0GB  28.1GB  logical   ext4

/ is on /dev/sdb6 and separate /boot partition is on /dev/sdb1
grub2 is installed on the MBR of /dev/sdb
arch linux up to date



Result of ls /boot -ltrah

total 14M
drwx------  2 root root  12K Feb 25  2011 lost+found
-rw-r--r--  1 root root 2.3M Aug 30 09:37 vmlinuz-linux
drwxr-xr-x 21 root root 4.0K Sep  3 16:34 ..
-rw-r--r--  1 root root 2.1M Sep  3 16:39 initramfs-linux.img
-rw-r--r--  1 root root 8.9M Sep  3 16:39 initramfs-linux-fallback.img
drwxr-xr-x  3 root root 8.0K Sep  3 16:51 grub
drwxr-xr-x  4 root root 1.0K Sep  3 16:52 .

blkid for UUID

/dev/sda5: UUID="601c43a0-8f0a-4c11-adc1-6bae49c79080" TYPE="ext4" 
/dev/sdb1: UUID="8da5154e-db26-4e93-94ed-ac9f45b7c12e" TYPE="ext2" 
/dev/sdb5: UUID="080d0b1d-bb95-44d7-9097-db62160b3590" TYPE="swap" 
/dev/sdb6: UUID="eccd0a39-dc34-4244-a087-42f92a0ff804" TYPE="ext4" 
/dev/sdb7: UUID="63431dee-a739-440f-ae5c-18b91942c446" TYPE="ext4" 
/dev/loop0: UUID="8da3477c-acc0-4f9a-91e6-cc5d91c07b05" TYPE="ext2"

Here is the generated grub.cfg (with grub-mkconfig):

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod uhci
insmod usb_keyboard
insmod usbms
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

set menu_color_normal=light-blue/black
set menu_color_highlight=light-cyan/blue

insmod part_msdos
insmod ext2
set root='(hd1,msdos6)'
search --no-floppy --fs-uuid --set=root eccd0a39-dc34-4244-a087-42f92a0ff804
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
  insmod part_msdos
  insmod ext2
  set root='(hd1,msdos1)'
  search --no-floppy --fs-uuid --set=root 8da5154e-db26-4e93-94ed-ac9f45b7c12e
  set locale_dir=($root)/grub/locale
  set lang=
  insmod gettext
fi
terminal_output gfxterm
if sleep --verbose --interruptible 1 ; then
  set timeout=1
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux linux' --class archlinux --class gnu-linux --class gnu --class os {
	load_video
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 8da5154e-db26-4e93-94ed-ac9f45b7c12e
	echo	'Loading Linux linux ...'
	linux	/vmlinuz-linux root=UUID=eccd0a39-dc34-4244-a087-42f92a0ff804 ro  quiet i915.modeset=1 acpi_sleep=s3_bios resume=/dev/disk/by-uuid/080d0b1d-bb95-44d7-9097-db62160b3590
	echo	'Loading initial ramdisk ...'
	initrd	/initramfs-linux.img
}
menuentry 'Arch Linux, with Linux linux Fallback' --class archlinux --class gnu-linux --class gnu --class os {
	load_video
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 8da5154e-db26-4e93-94ed-ac9f45b7c12e
	echo	'Loading Linux linux ...'
	linux	/vmlinuz-linux root=UUID=eccd0a39-dc34-4244-a087-42f92a0ff804 ro  quiet i915.modeset=1 acpi_sleep=s3_bios resume=/dev/disk/by-uuid/080d0b1d-bb95-44d7-9097-db62160b3590
	echo	'Loading initial ramdisk ...'
	initrd	/initramfs-linux-fallback.img
}
menuentry 'Arch Linux, with Linux linux (recovery mode)' --class archlinux --class gnu-linux --class gnu --class os {
	load_video
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set=root 8da5154e-db26-4e93-94ed-ac9f45b7c12e
	echo	'Loading Linux linux ...'
	linux	/vmlinuz-linux root=UUID=eccd0a39-dc34-4244-a087-42f92a0ff804 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/initramfs-linux-fallback.img
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###


lsinitcpio initramfs-linux.img

 
.
./dev
./etc
./etc/udev
./etc/udev/udev.conf
./etc/modprobe.d
./etc/modprobe.d/usb-load-ehci-first.conf
./init
./init_functions
./sbin
./sbin/modprobe
./sbin/udevadm
./sbin/blkid
./sbin/udevd
./sys
./config
./hooks
./hooks/udev
./lib
./lib/udev
./lib/udev/rules.d
./lib/udev/rules.d/80-drivers.rules
./lib/udev/rules.d/60-persistent-storage.rules
./lib/udev/rules.d/50-udev-default.rules
./lib/udev/rules.d/50-firmware.rules
./lib/udev/ata_id
./lib/udev/scsi_id
./lib/udev/usb_id
./lib/udev/path_id
./lib/udev/firmware
./lib/libc.so.6
./lib/libuuid.so.1
./lib/libc-2.14.so
./lib/libblkid.so.1
./lib/ld-2.14.so
./lib/ld-linux.so.2
./lib/libpthread-2.14.so
./lib/librt-2.14.so
./lib/libpthread.so.0
./lib/libuuid.so.1.3.0
./lib/librt.so.1
./lib/libblkid.so.1.1.0
./lib/modules
./lib/modules/3.0-ARCH
./lib/modules/3.0-ARCH/modules.alias.bin
./lib/modules/3.0-ARCH/kernel
./lib/modules/3.0-ARCH/kernel/drivers
./lib/modules/3.0-ARCH/kernel/drivers/video
./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/input
./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-karma.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/usb-storage.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-realtek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-isd200.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-jumpshot.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-usbat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-sddr09.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-alauda.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-onetouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-sddr55.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-freecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-eneub6250.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/storage/ums-datafab.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/misc
./lib/modules/3.0-ARCH/kernel/drivers/usb/misc/ftdi-elan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/core
./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/oxu210hp-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/xhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/u132-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/r8a66597-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/hwa-hc.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/isp1362-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ohci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/isp1760.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/whci
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/whci/whci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/wusbcore
./lib/modules/3.0-ARCH/kernel/drivers/usb/wusbcore/wusbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/wusbcore/wusb-wa.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/uwb
./lib/modules/3.0-ARCH/kernel/drivers/uwb/umc.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/uwb/uwb.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/uwb/whci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata
./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/ata_piix.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/pata_acpi.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/cdrom
./lib/modules/3.0-ARCH/kernel/drivers/cdrom/cdrom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi
./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sr_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
./lib/modules/3.0-ARCH/kernel/fs
./lib/modules/3.0-ARCH/kernel/fs/jbd2
./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/ext4
./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
./lib/modules/3.0-ARCH/kernel/lib
./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
./lib/modules/3.0-ARCH/kernel/sound
./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core
./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/seq
./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
./lib/modules/3.0-ARCH/modules.symbols.bin
./lib/modules/3.0-ARCH/modules.dep.bin
./usr
./usr/sbin
./usr/bin
./proc
./bin
./bin/busybox
./run


mkinitcpio.conf

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES=""  

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
#    FILES="/etc/modprobe.d/modprobe.conf"
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect pata scsi sata filesystems"
#
##   This is identical to the above, except the old ide subsystem is
##   used for IDE devices instead of the new pata subsystem.
#    HOOKS="base udev autodetect ide scsi sata filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev pata scsi sata usb filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev pata mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"

# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

From a chroot (from an archboot liveCD), I've tried  to reinstall grub2, regenerate kernel images with mkinitcpio, but it is still the same thing...

What is really weird is that I've got two other computers running Arch and there has been no problem at all during the upgrade....

Any help would be appreciated..

Thanks.

Last edited by LeCrayonVert (2011-09-04 07:11:47)

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#2 2011-09-03 16:55:20

skodabenz
Banned
From: Tamilnadu, India
Registered: 2010-04-11
Posts: 382

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

What the the package version in your system of grub2-common , grub2-bios , linux , mkinitcpio ?

My new forum user/nick name is "the.ridikulus.rat" .

Offline

#3 2011-09-03 17:06:49

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

grub2-common : 1:1.99-5
grub2-bios : 1:1.99-5
linux : 3.0.4-1
mkinitcpio : 0.7.2-1

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#4 2011-09-03 19:47:16

skodabenz
Banned
From: Tamilnadu, India
Registered: 2010-04-11
Posts: 382

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

I think the resume= part is causing the problem. Or can you try without the acpi_sleep=s3_bios part?

My new forum user/nick name is "the.ridikulus.rat" .

Offline

#5 2011-09-03 19:53:58

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

Removed both options...still the same thing.
I've tried to reinstall kernel26-lts...and even with this kernel, the same error occurs...It's most likely related to the mkinitcpio creation process.

Last edited by LeCrayonVert (2011-09-03 19:54:54)

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#6 2011-09-03 20:00:00

skodabenz
Banned
From: Tamilnadu, India
Registered: 2010-04-11
Posts: 382

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

LeCrayonVert wrote:

Removed both options...still the same thing.
I've tried to reinstall kernel26-lts...and even with this kernel, the same error occurs...It's most likely related to the mkinitcpio creation process.

Did you try the fallback initramfs?

My new forum user/nick name is "the.ridikulus.rat" .

Offline

#7 2011-09-03 20:04:19

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

Yep, same thing as well sad
I've also run some fsck checks on every partition just to be sure...everything seems fine....

Last edited by LeCrayonVert (2011-09-03 20:07:29)

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#8 2011-09-04 07:11:19

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

Since I didn't have that much time to solve thi, I've rollbacked from a backup (fsarchiver) from the 15th of June, then pacman -Syu again and everything works fine now....there must have been something wrong during the firt upgrade process....

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

#9 2011-09-21 06:27:15

Kephaleon
Member
Registered: 2011-04-10
Posts: 3

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

How did this issue get solved?

Offline

#10 2011-09-21 16:39:53

LeCrayonVert
Member
Registered: 2010-09-01
Posts: 134

Re: [Solved] Grub2 and Kernel Panic since upgrade to kernel 3.0

Kephaleon > I've used a fsarchiver backup image to restore the root and the boot partition.

I believe in a world I can and do understand. A rational universe, explained through rational means.

Offline

Pages: 1

Board footer

Powered by FluxBB