You are not logged in.

Pages: 1

#1 2011-08-01 13:13:52

mastermind-mp
Member
Registered: 2011-07-30
Posts: 5

[GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

Hey,

I installed the Catalyst ATI driver a few days ago, but I didn't realize any speed-up, so I removed Catalyst and installed the
xf86 ati driver. Now, Gnome3 uses the Fallback Mode when I logg in.

The .xsession-errors tells me that it didn't find 3d Hardware-SUpport:

gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[2049]: WARNING: Session 'gnome' runnable check failed: Abbruch mit
 Code 1

But on the other hand glxgears works and "glxinfo | grep rendering" tells me this:

direct rendering: Yes

Please help me smile I'm getting desperate and don't want to install the whole System again... already tried to remove and reinstall libgl, mesa, x and gnome but nothing worked...

Offline

#2 2011-08-01 13:57:31

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

paste Xorg.0.log

Give what you have. To someone, it may be better than you dare to think.

Offline

#3 2011-08-01 14:05:54

mastermind-mp
Member
Registered: 2011-07-30
Posts: 5

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

X.Org X Server 1.10.3
Release Date: 2011-07-08
[  1201.884] X Protocol Version 11, Revision 0
[  1201.884] Build Operating System: Linux 2.6.39-ARCH x86_64 
[  1201.884] Current Operating System: Linux turing 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[  1201.884] Kernel command line: root=/dev/sda2 ro nomodeset
[  1201.884] Build Date: 09 July 2011  07:52:32AM
[  1201.885]  
[  1201.885] Current version of pixman: 0.22.2
[  1201.885]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1201.885] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1201.886] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug  1 15:02:25 2011
[  1201.898] (==) Using config file: "/etc/X11/xorg.conf"
[  1201.898] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1201.930] (==) ServerLayout "X.org Configured"
[  1201.930] (**) |-->Screen "Screen0" (0)
[  1201.930] (**) |   |-->Monitor "Monitor0"
[  1201.931] (**) |   |-->Device "Card0"
[  1201.931] (**) |-->Input Device "Mouse0"
[  1201.931] (**) |-->Input Device "Keyboard0"
[  1201.931] (==) Automatically adding devices
[  1201.931] (==) Automatically enabling devices
[  1201.968] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1201.968]     Entry deleted from font path.
[  1201.990] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1201.990]     Entry deleted from font path.
[  1201.990]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1201.990] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1201.990]     Entry deleted from font path.
[  1201.990]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1201.990] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1201.990]     Entry deleted from font path.
[  1201.990] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1201.990]     Entry deleted from font path.
[  1201.990]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1201.990] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1201.990]     Entry deleted from font path.
[  1201.990]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1201.990] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[  1201.990] (**) ModulePath set to "/usr/lib/xorg/modules"
[  1201.990] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1201.990] (WW) Disabling Mouse0
[  1201.990] (WW) Disabling Keyboard0
[  1201.990] (II) Loader magic: 0x7d3440
[  1201.991] (II) Module ABI versions:
[  1201.991]     X.Org ANSI C Emulation: 0.4
[  1201.991]     X.Org Video Driver: 10.0
[  1201.991]     X.Org XInput driver : 12.2
[  1201.991]     X.Org Server Extension : 5.0
[  1201.992] (--) PCI:*(0:1:0:0) 1002:95c4:1043:19e2 rev 0, Mem @ 0xc0000000/536870912, 0xfdef0000/65536, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
[  1201.992] (II) Open ACPI successful (/var/run/acpid.socket)
[  1201.992] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[  1201.992] (II) LoadModule: "glx"
[  1202.027] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1202.051] (II) Module glx: vendor="X.Org Foundation"
[  1202.051]     compiled for 1.10.3, module version = 1.0.0
[  1202.051]     ABI class: X.Org Server Extension, version 5.0
[  1202.051] (==) AIGLX enabled
[  1202.051] (II) Loading extension GLX
[  1202.052] (II) LoadModule: "extmod"
[  1202.052] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1202.061] (II) Module extmod: vendor="X.Org Foundation"
[  1202.061]     compiled for 1.10.3, module version = 1.0.0
[  1202.061]     Module class: X.Org Server Extension
[  1202.061]     ABI class: X.Org Server Extension, version 5.0
[  1202.061] (II) Loading extension MIT-SCREEN-SAVER
[  1202.061] (II) Loading extension XFree86-VidModeExtension
[  1202.061] (II) Loading extension XFree86-DGA
[  1202.061] (II) Loading extension DPMS
[  1202.061] (II) Loading extension XVideo
[  1202.061] (II) Loading extension XVideo-MotionCompensation
[  1202.061] (II) Loading extension X-Resource
[  1202.062] (II) LoadModule: "record"
[  1202.062] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1202.063] (II) Module record: vendor="X.Org Foundation"
[  1202.063]     compiled for 1.10.3, module version = 1.13.0
[  1202.063]     Module class: X.Org Server Extension
[  1202.063]     ABI class: X.Org Server Extension, version 5.0
[  1202.063] (II) Loading extension RECORD
[  1202.063] (II) LoadModule: "dri2"
[  1202.064] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1202.093] (II) Module dri2: vendor="X.Org Foundation"
[  1202.093]     compiled for 1.10.3, module version = 1.2.0
[  1202.093]     ABI class: X.Org Server Extension, version 5.0
[  1202.093] (II) Loading extension DRI2
[  1202.093] (II) LoadModule: "dbe"
[  1202.094] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1202.095] (II) Module dbe: vendor="X.Org Foundation"
[  1202.095]     compiled for 1.10.3, module version = 1.0.0
[  1202.095]     Module class: X.Org Server Extension
[  1202.095]     ABI class: X.Org Server Extension, version 5.0
[  1202.095] (II) Loading extension DOUBLE-BUFFER
[  1202.095] (II) LoadModule: "dri"
[  1202.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1202.096] (II) Module dri: vendor="X.Org Foundation"
[  1202.096]     compiled for 1.10.3, module version = 1.0.0
[  1202.096]     ABI class: X.Org Server Extension, version 5.0
[  1202.096] (II) Loading extension XFree86-DRI
[  1202.096] (II) LoadModule: "radeon"
[  1202.097] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  1202.116] (II) Module radeon: vendor="X.Org Foundation"
[  1202.117]     compiled for 1.10.0, module version = 6.14.1
[  1202.117]     Module class: X.Org Video Driver
[  1202.117]     ABI class: X.Org Video Driver, version 10.0
[  1202.118] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
    ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
    ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6250 Graphics, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS
[  1202.135] (--) using VT number 7

[  1202.138] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  1202.138] (II) [KMS] drm report modesetting isn't supported.
[  1202.138] (II) RADEON(0): TOTO SAYS 00000000fdef0000
[  1202.138] (II) RADEON(0): MMIO registers at 0x00000000fdef0000: size 64KB
[  1202.138] (II) RADEON(0): PCI bus 1 card 0 func 0
[  1202.138] (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  1202.138] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1202.141] (==) RADEON(0): Default visual is TrueColor
[  1202.141] (II) Loading sub module "vgahw"
[  1202.141] (II) LoadModule: "vgahw"
[  1202.141] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[  1202.149] (II) Module vgahw: vendor="X.Org Foundation"
[  1202.149]     compiled for 1.10.3, module version = 0.1.0
[  1202.149]     ABI class: X.Org Video Driver, version 10.0
[  1202.149] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[  1202.149] (==) RADEON(0): RGB weight 888
[  1202.149] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  1202.150] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4)
[  1202.150] (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
[  1202.150] (II) RADEON(0): PCIE card detected
[  1202.150] (II) Loading sub module "int10"
[  1202.151] (II) LoadModule: "int10"
[  1202.151] (II) Loading /usr/lib/xorg/modules/libint10.so
[  1202.154] (II) Module int10: vendor="X.Org Foundation"
[  1202.154]     compiled for 1.10.3, module version = 1.0.0
[  1202.154]     ABI class: X.Org Video Driver, version 10.0
[  1202.154] (II) RADEON(0): initializing int10
[  1202.165] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[  1202.167] (II) RADEON(0): ATOM BIOS detected
[  1202.171] (II) RADEON(0): ATOM BIOS Rom: 
[  1202.171]     SubsystemVendorID: 0x1043 SubsystemID: 0x1562
[  1202.171]     IOBaseAddress: 0xd800
[  1202.171]     Filename: Test.bin    
[  1202.171]     BIOS Bootup Message: 

ASID:19002.001                                                              


[  1202.171] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[  1202.171] (II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
[  1202.172] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[  1202.172] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
[  1202.172] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[  1202.172] (II) RADEON(0): Default Engine Clock: 500000
[  1202.172] (II) RADEON(0): Default Memory Clock: 500000
[  1202.172] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[  1202.172] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[  1202.172] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
[  1202.172] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
[  1202.172] (II) RADEON(0): Maximum Pixel Clock: 400000
[  1202.172] (II) RADEON(0): Reference Clock: 27000
[  1202.172] drmOpenDevice: node name is /dev/dri/card0
[  1202.172] drmOpenDevice: open result is 11, (OK)
[  1202.172] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  1202.172] drmOpenDevice: node name is /dev/dri/card0
[  1202.172] drmOpenDevice: open result is 11, (OK)
[  1202.172] drmOpenByBusid: drmOpenMinor returns 11
[  1202.172] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  1202.173] (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
[  1202.173] (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

[  1202.173] (II) RADEON(0): Will try to use DMA for Xv image transfers
[  1202.173] (II) RADEON(0): Detected total video RAM=524288K, accessible=524288K (PCI BAR=524288K)
[  1202.173] (--) RADEON(0): Mapped VideoRAM: 524288 kByte (64 bit DDR SDRAM)
[  1202.173] (II) RADEON(0): Color tiling disabled
[  1202.173] (II) Loading sub module "ddc"
[  1202.173] (II) LoadModule: "ddc"
[  1202.173] (II) Module "ddc" already built-in
[  1202.173] (II) Loading sub module "i2c"
[  1202.173] (II) LoadModule: "i2c"
[  1202.173] (II) Module "i2c" already built-in
[  1202.173] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
[  1202.173] (WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71000
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 3, VSyncWidth: 6
[  1202.173] (II) RADEON(0): Output VGA-0 using monitor section Monitor0
[  1202.173] (II) RADEON(0): I2C bus "VGA-0" initialized.
[  1202.173] (II) RADEON(0): Output LVDS has no monitor section
[  1202.174] (II) RADEON(0): Output DVI-0 has no monitor section
[  1202.174] (II) RADEON(0): I2C bus "DVI-0" initialized.
[  1202.174] (II) RADEON(0): Port0:
[  1202.174]   XRANDR name: VGA-0
[  1202.174]   Connector: VGA
[  1202.174]   CRT1: INTERNAL_KLDSCP_DAC1
[  1202.174]   DDC reg: 0x7e40
[  1202.174] (II) RADEON(0): Port1:
[  1202.174]   XRANDR name: LVDS
[  1202.174]   Connector: LVDS
[  1202.174]   LCD1: INTERNAL_KLDSCP_LVTMA
[  1202.174]   DDC reg: 0x0
[  1202.174] (II) RADEON(0): Port2:
[  1202.174]   XRANDR name: DVI-0
[  1202.174]   Connector: DVI-D
[  1202.174]   DFP1: INTERNAL_UNIPHY
[  1202.174]   DDC reg: 0x7e60
[  1202.174] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[  1202.184] Dac detection success
[  1202.184] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1202.184] finished output detect: 0
[  1202.184] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1202.184] finished output detect: 1
[  1202.184] (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
[  1202.188] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1202.188] finished output detect: 2
[  1202.188] finished all detect
[  1202.198] Dac detection success
[  1202.198] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1202.198] (II) RADEON(0): EDID for output VGA-0
[  1202.198] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1202.198] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1202.198] (II) RADEON(0): Added native panel mode: 1280x800
[  1202.198] (II) RADEON(0): Printing probed modes for output LVDS
[  1202.198] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 (49.3 kHz)
[  1202.198] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[  1202.198] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[  1202.198] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[  1202.198] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[  1202.198] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[  1202.202] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1202.202] (II) RADEON(0): EDID for output DVI-0
[  1202.202] (II) RADEON(0): Output VGA-0 disconnected
[  1202.202] (II) RADEON(0): Output LVDS connected
[  1202.202] (II) RADEON(0): Output DVI-0 disconnected
[  1202.202] (II) RADEON(0): Using exact sizes for initial modes
[  1202.202] (II) RADEON(0): Output LVDS using initial mode 1280x800
[  1202.202] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1202.202] (==) RADEON(0): DPI set to (96, 96)
[  1202.202] (II) Loading sub module "fb"
[  1202.202] (II) LoadModule: "fb"
[  1202.203] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1202.205] (II) Module fb: vendor="X.Org Foundation"
[  1202.205]     compiled for 1.10.3, module version = 1.0.0
[  1202.205]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1202.205] (II) Loading sub module "ramdac"
[  1202.205] (II) LoadModule: "ramdac"
[  1202.205] (II) Module "ramdac" already built-in
[  1202.205] (==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
[  1202.205] (II) Loading sub module "exa"
[  1202.206] (II) LoadModule: "exa"
[  1202.206] (II) Loading /usr/lib/xorg/modules/libexa.so
[  1202.216] (II) Module exa: vendor="X.Org Foundation"
[  1202.216]     compiled for 1.10.3, module version = 2.5.0
[  1202.217]     ABI class: X.Org Video Driver, version 10.0
[  1202.217] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[  1202.217] (--) Depth 24 pixmap format is 32 bpp
[  1202.217] (II) RADEON(0): RADEONScreenInit c0000000 0 0
[  1203.153] Output DIG0 transmitter setup success
[  1203.165] Blank CRTC 0 success
[  1203.166] Disable CRTC memreq 0 success
[  1203.182] Disable CRTC 0 success
[  1203.182] Blank CRTC 1 success
[  1203.182] Disable CRTC memreq 1 success
[  1203.182] Disable CRTC 1 success
[  1203.182] (II) RADEON(0): Dynamic Power Management Disabled
[  1203.182] (==) RADEON(0): Using 24 bit depth buffer
[  1203.183] mc fb loc is 00df00c0
[  1203.183] (II) RADEON(0): RADEONInitMemoryMap() : 
[  1203.183] (II) RADEON(0):   mem_size         : 0x20000000
[  1203.183] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0
[  1203.183] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[  1203.183] (II) RADEON(0): Depth moves disabled by default
[  1203.184] (II) RADEON(0): Allocating from a screen of 524224 kb
[  1203.184] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
[  1203.184] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
[  1203.184] (II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
[  1203.184] (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x1fff0000
[  1203.184] (II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
[  1203.184] (II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
[  1203.184] (II) RADEON(0): Will use 251904 kb for textures at offset 0x012c8000
[  1203.184] (II) RADEON(0): Will use 253088 kb for X Server offscreen at offset 0x108c8000
[  1203.184] drmOpenDevice: node name is /dev/dri/card0
[  1203.185] drmOpenDevice: open result is 11, (OK)
[  1203.185] drmOpenDevice: node name is /dev/dri/card0
[  1203.185] drmOpenDevice: open result is 11, (OK)
[  1203.185] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  1203.185] drmOpenDevice: node name is /dev/dri/card0
[  1203.185] drmOpenDevice: open result is 11, (OK)
[  1203.185] drmOpenByBusid: drmOpenMinor returns 11
[  1203.185] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  1203.185] (II) [drm] DRM interface version 1.4
[  1203.185] (II) [drm] DRM open master succeeded.
[  1203.185] (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[  1203.185] (II) RADEON(0): [drm] framebuffer handle = 0xc0000000
[  1203.185] (II) RADEON(0): [drm] added 1 reserved context for kernel
[  1203.185] (II) RADEON(0): X context handle = 0x1
[  1203.185] (II) RADEON(0): [drm] installed DRM signal handler
[  1203.213] (II) RADEON(0): [pci] 32768 kB allocated with handle 0x1160e900
[  1203.213] (II) RADEON(0): [pci] ring handle = 0x2b7ff000
[  1203.213] (II) RADEON(0): [pci] Ring mapped at 0x7f90b8cc5000
[  1203.213] (II) RADEON(0): [pci] Ring contents 0x00000000
[  1203.213] (II) RADEON(0): [pci] ring read ptr handle = 0x1b800000
[  1203.213] (II) RADEON(0): [pci] Ring read ptr mapped at 0x7f90b8ddf000
[  1203.213] (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
[  1203.213] (II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b800000
[  1203.213] (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f909457e000
[  1203.213] (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
[  1203.213] (II) RADEON(0): [pci] GART texture map handle = 0x2b801000
[  1203.213] (II) RADEON(0): [pci] GART Texture map mapped at 0x7f90928fe000
[  1203.214] (II) RADEON(0): [drm] register handle = 0x2fff8000
[  1203.214] (II) RADEON(0): [dri] Visual configs initialized
[  1203.610] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[  1203.610] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
[  1203.610] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[  1203.620] (==) RADEON(0): Backing store disabled
[  1203.620] (II) RADEON(0): [DRI] installation complete
[  1203.690] (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
[  1203.690] (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
[  1203.690] (II) RADEON(0): [drm] dma control initialized, using IRQ 16
[  1203.690] (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
[  1203.691] (WW) RADEON(0): DRI init changed memory map, adjusting ...
[  1203.691] (WW) RADEON(0):   MC_FB_LOCATION  was: 0x00df00c0 is: 0x00df00c0
[  1203.691] (WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
[  1203.691] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[  1203.691] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
[  1203.691] (II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
[  1203.691] (II) RADEON(0): Direct rendering enabled
[  1203.691] (II) RADEON(0): Setting EXA maxPitchBytes
[  1203.691] (II) EXA(0): Offscreen pixmap area of 259162112 bytes
[  1203.691] (II) EXA(0): Driver registered support for the following operations:
[  1203.691] (II)         Solid
[  1203.691] (II)         Copy
[  1203.691] (II)         Composite (RENDER acceleration)
[  1203.691] (II)         UploadToScreen
[  1203.691] (II)         DownloadFromScreen
[  1203.692] (II) RADEON(0): Acceleration enabled
[  1203.692] (==) RADEON(0): DPMS enabled
[  1203.692] (==) RADEON(0): Silken mouse enabled
[  1203.693] (II) RADEON(0): Set up textured video
[  1203.696] Output CRT1 disable success
[  1203.698] Output DIG0 transmitter setup success
[  1203.698] Output DIG0 transmitter setup success
[  1203.698] Blank CRTC 0 success
[  1203.698] Disable CRTC memreq 0 success
[  1203.698] Disable CRTC 0 success
[  1203.698] Blank CRTC 1 success
[  1203.698] Disable CRTC memreq 1 success
[  1203.698] Disable CRTC 1 success
[  1203.699] Output DIG0 transmitter setup success
[  1203.699] Blank CRTC 0 success
[  1203.699] Disable CRTC memreq 0 success
[  1203.699] Disable CRTC 0 success
[  1203.699] Set CRTC 0 Source success
[  1203.699] Mode 1280x800 - 1440 823 0
[  1203.700] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[  1203.700] (II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
[  1203.700] (II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
[  1203.700] Picked PLL 0
[  1203.700] before 7100
[  1203.700] after 7100
[  1203.700] best_freq: 71116
[  1203.700] best_feedback_div: 295
[  1203.700] best_frac_feedback_div: 0
[  1203.700] best_ref_div: 7
[  1203.700] best_post_div: 16
[  1203.700] (II) RADEON(0): crtc(0) Clock: mode 71000, PLL 711160
[  1203.700] (II) RADEON(0): crtc(0) PLL  : refdiv 7, fbdiv 0x127(295), fracfbdiv 0, pdiv 16
[  1203.703] Set CRTC 0 PLL success
[  1203.703] Set CRTC Timing success
[  1203.703] Set CRTC 0 Overscan success
[  1203.703] Not using RMX
[  1203.703] scaler 0 setup success
[  1203.703] Set CRTC 0 Source success
[  1203.703] crtc 0 YUV disable setup success
[  1203.705] Output DIG0 transmitter setup success
[  1203.705] Output DIG1 encoder setup success
[  1203.705] Output DIG1 encoder setup success
[  1203.705] Output DIG0 transmitter setup success
[  1203.706] Output DIG0 transmitter setup success
[  1203.707] Output DIG0 transmitter setup success
[  1203.708] Output DIG0 transmitter setup success
[  1203.708] Enable CRTC 0 success
[  1203.709] Enable CRTC memreq 0 success
[  1203.709] Unblank CRTC 0 success
[  1203.709] Output CRT1 disable success
[  1203.709] Output DIG0 transmitter setup success
[  1203.709] Blank CRTC 1 success
[  1203.709] Disable CRTC memreq 1 success
[  1203.709] Disable CRTC 1 success
[  1203.709] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1203.709] (--) RandR disabled
[  1203.709] (II) Initializing built-in extension Generic Event Extension
[  1203.709] (II) Initializing built-in extension SHAPE
[  1203.709] (II) Initializing built-in extension MIT-SHM
[  1203.709] (II) Initializing built-in extension XInputExtension
[  1203.709] (II) Initializing built-in extension XTEST
[  1203.710] (II) Initializing built-in extension BIG-REQUESTS
[  1203.710] (II) Initializing built-in extension SYNC
[  1203.710] (II) Initializing built-in extension XKEYBOARD
[  1203.710] (II) Initializing built-in extension XC-MISC
[  1203.710] (II) Initializing built-in extension SECURITY
[  1203.710] (II) Initializing built-in extension XINERAMA
[  1203.710] (II) Initializing built-in extension XFIXES
[  1203.710] (II) Initializing built-in extension RENDER
[  1203.710] (II) Initializing built-in extension RANDR
[  1203.710] (II) Initializing built-in extension COMPOSITE
[  1203.710] (II) Initializing built-in extension DAMAGE
[  1203.723] (II) AIGLX: Screen 0 is not DRI2 capable
[  1203.723] drmOpenDevice: node name is /dev/dri/card0
[  1203.723] drmOpenDevice: open result is 12, (OK)
[  1203.723] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[  1203.723] drmOpenDevice: node name is /dev/dri/card0
[  1203.723] drmOpenDevice: open result is 12, (OK)
[  1203.723] drmOpenByBusid: drmOpenMinor returns 12
[  1203.723] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[  1203.723] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[  1204.105] (EE) AIGLX error: Calling driver entry point failed
[  1204.327] (EE) AIGLX: reverting to software rendering
[  1204.802] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[  1204.803] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  1204.803] (II) RADEON(0): Setting screen physical size to 338 x 211
[  1206.093] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[  1206.093] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1206.093] (**) Power Button: Applying InputClass "keyboard"
[  1206.093] (II) LoadModule: "evdev"
[  1206.093] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.112] (II) Module evdev: vendor="X.Org Foundation"
[  1206.112]     compiled for 1.10.0, module version = 2.6.0
[  1206.112]     Module class: X.Org XInput Driver
[  1206.112]     ABI class: X.Org XInput driver, version 12.2
[  1206.112] (II) Using input driver 'evdev' for 'Power Button'
[  1206.112] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.112] (**) Power Button: always reports core events
[  1206.112] (**) Power Button: Device: "/dev/input/event7"
[  1206.133] (--) Power Button: Found keys
[  1206.133] (II) Power Button: Configuring as keyboard
[  1206.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[  1206.133] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  1206.133] (**) Option "xkb_rules" "evdev"
[  1206.133] (**) Option "xkb_model" "evdev"
[  1206.133] (**) Option "xkb_layout" "de"
[  1206.133] (WW) Option "xkb_variant" requires an string value
[  1206.133] (WW) Option "XkbVariant" requires an string value
[  1206.733] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  1206.733] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1206.733] (**) Video Bus: Applying InputClass "keyboard"
[  1206.733] (II) Using input driver 'evdev' for 'Video Bus'
[  1206.733] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.733] (**) Video Bus: always reports core events
[  1206.733] (**) Video Bus: Device: "/dev/input/event8"
[  1206.749] (--) Video Bus: Found keys
[  1206.750] (II) Video Bus: Configuring as keyboard
[  1206.750] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input8/event8"
[  1206.750] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  1206.750] (**) Option "xkb_rules" "evdev"
[  1206.750] (**) Option "xkb_model" "evdev"
[  1206.750] (**) Option "xkb_layout" "de"
[  1206.750] (WW) Option "xkb_variant" requires an string value
[  1206.750] (WW) Option "XkbVariant" requires an string value
[  1206.751] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[  1206.751] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1206.751] (**) Power Button: Applying InputClass "keyboard"
[  1206.752] (II) Using input driver 'evdev' for 'Power Button'
[  1206.752] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.752] (**) Power Button: always reports core events
[  1206.752] (**) Power Button: Device: "/dev/input/event5"
[  1206.763] (--) Power Button: Found keys
[  1206.763] (II) Power Button: Configuring as keyboard
[  1206.763] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[  1206.763] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  1206.763] (**) Option "xkb_rules" "evdev"
[  1206.763] (**) Option "xkb_model" "evdev"
[  1206.763] (**) Option "xkb_layout" "de"
[  1206.763] (WW) Option "xkb_variant" requires an string value
[  1206.763] (WW) Option "XkbVariant" requires an string value
[  1206.764] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[  1206.764] (II) No input driver/identifier specified (ignoring)
[  1206.764] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[  1206.764] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1206.764] (**) Sleep Button: Applying InputClass "keyboard"
[  1206.764] (II) Using input driver 'evdev' for 'Sleep Button'
[  1206.764] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.765] (**) Sleep Button: always reports core events
[  1206.765] (**) Sleep Button: Device: "/dev/input/event6"
[  1206.773] (--) Sleep Button: Found keys
[  1206.773] (II) Sleep Button: Configuring as keyboard
[  1206.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
[  1206.773] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[  1206.773] (**) Option "xkb_rules" "evdev"
[  1206.773] (**) Option "xkb_model" "evdev"
[  1206.773] (**) Option "xkb_layout" "de"
[  1206.773] (WW) Option "xkb_variant" requires an string value
[  1206.773] (WW) Option "XkbVariant" requires an string value
[  1206.778] (II) config/udev: Adding input device Logitech  USB WheelMouse      (/dev/input/event1)
[  1206.778] (**) Logitech  USB WheelMouse     : Applying InputClass "evdev pointer catchall"
[  1206.778] (II) Using input driver 'evdev' for 'Logitech  USB WheelMouse     '
[  1206.778] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.778] (**) Logitech  USB WheelMouse     : always reports core events
[  1206.778] (**) Logitech  USB WheelMouse     : Device: "/dev/input/event1"
[  1206.800] (--) Logitech  USB WheelMouse     : Found 3 mouse buttons
[  1206.800] (--) Logitech  USB WheelMouse     : Found scroll wheel(s)
[  1206.800] (--) Logitech  USB WheelMouse     : Found relative axes
[  1206.800] (--) Logitech  USB WheelMouse     : Found x and y relative axes
[  1206.800] (II) Logitech  USB WheelMouse     : Configuring as mouse
[  1206.800] (II) Logitech  USB WheelMouse     : Adding scrollwheel support
[  1206.800] (**) Logitech  USB WheelMouse     : YAxisMapping: buttons 4 and 5
[  1206.800] (**) Logitech  USB WheelMouse     : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1206.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input1/event1"
[  1206.800] (II) XINPUT: Adding extended input device "Logitech  USB WheelMouse     " (type: MOUSE)
[  1206.800] (II) Logitech  USB WheelMouse     : initialized for relative axes.
[  1206.800] (**) Logitech  USB WheelMouse     : (accel) keeping acceleration scheme 1
[  1206.800] (**) Logitech  USB WheelMouse     : (accel) acceleration profile 0
[  1206.800] (**) Logitech  USB WheelMouse     : (accel) acceleration factor: 2.000
[  1206.800] (**) Logitech  USB WheelMouse     : (accel) acceleration threshold: 4
[  1206.801] (II) config/udev: Adding input device Logitech  USB WheelMouse      (/dev/input/mouse0)
[  1206.801] (II) No input driver/identifier specified (ignoring)
[  1206.802] (II) config/udev: Adding input device USB2.0 1.3M UVC WebCam  (/dev/input/event11)
[  1206.802] (**) USB2.0 1.3M UVC WebCam : Applying InputClass "evdev keyboard catchall"
[  1206.802] (**) USB2.0 1.3M UVC WebCam : Applying InputClass "keyboard"
[  1206.802] (II) Using input driver 'evdev' for 'USB2.0 1.3M UVC WebCam '
[  1206.802] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.802] (**) USB2.0 1.3M UVC WebCam : always reports core events
[  1206.802] (**) USB2.0 1.3M UVC WebCam : Device: "/dev/input/event11"
[  1206.820] (--) USB2.0 1.3M UVC WebCam : Found keys
[  1206.820] (II) USB2.0 1.3M UVC WebCam : Configuring as keyboard
[  1206.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input11/event11"
[  1206.820] (II) XINPUT: Adding extended input device "USB2.0 1.3M UVC WebCam " (type: KEYBOARD)
[  1206.820] (**) Option "xkb_rules" "evdev"
[  1206.820] (**) Option "xkb_model" "evdev"
[  1206.820] (**) Option "xkb_layout" "de"
[  1206.820] (WW) Option "xkb_variant" requires an string value
[  1206.820] (WW) Option "XkbVariant" requires an string value
[  1206.826] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[  1206.826] (II) No input driver/identifier specified (ignoring)
[  1206.827] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event3)
[  1206.827] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[  1206.827] (**) Asus Laptop extra buttons: Applying InputClass "keyboard"
[  1206.827] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[  1206.827] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.827] (**) Asus Laptop extra buttons: always reports core events
[  1206.827] (**) Asus Laptop extra buttons: Device: "/dev/input/event3"
[  1206.846] (--) Asus Laptop extra buttons: Found keys
[  1206.846] (II) Asus Laptop extra buttons: Configuring as keyboard
[  1206.846] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input3/event3"
[  1206.846] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
[  1206.846] (**) Option "xkb_rules" "evdev"
[  1206.846] (**) Option "xkb_model" "evdev"
[  1206.846] (**) Option "xkb_layout" "de"
[  1206.846] (WW) Option "xkb_variant" requires an string value
[  1206.846] (WW) Option "XkbVariant" requires an string value
[  1206.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1206.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1206.847] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[  1206.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1206.848] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.848] (**) AT Translated Set 2 keyboard: always reports core events
[  1206.848] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1206.866] (--) AT Translated Set 2 keyboard: Found keys
[  1206.866] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  1206.866] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1206.866] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  1206.866] (**) Option "xkb_rules" "evdev"
[  1206.866] (**) Option "xkb_model" "evdev"
[  1206.866] (**) Option "xkb_layout" "de"
[  1206.866] (WW) Option "xkb_variant" requires an string value
[  1206.866] (WW) Option "XkbVariant" requires an string value
[  1206.867] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[  1206.867] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1206.867] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[  1206.867] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1206.868] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1206.868] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[  1206.893] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[  1206.893] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[  1206.893] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[  1206.893] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[  1206.893] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[  1206.893] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[  1206.893] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1206.893] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[  1206.893] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  1206.893] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[  1206.893] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1206.893] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[  1206.893] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1206.893] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1206.894] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  1206.894] (II) No input driver/identifier specified (ignoring)
[  1206.894] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[  1206.894] (II) No input driver/identifier specified (ignoring)
[  1209.804] Dac detection success
[  1209.804] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1209.804] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1209.804] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1209.804] (II) RADEON(0): Added native panel mode: 1280x800
[  1209.808] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1209.829] Dac detection success
[  1209.829] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1209.829] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1209.829] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1209.829] (II) RADEON(0): Added native panel mode: 1280x800
[  1209.833] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1209.846] Dac detection success
[  1209.846] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1209.846] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1209.846] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1209.846] (II) RADEON(0): Added native panel mode: 1280x800
[  1209.850] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1209.862] Dac detection success
[  1209.862] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1209.862] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1209.862] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1209.862] (II) RADEON(0): Added native panel mode: 1280x800
[  1209.866] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[  1213.042] Dac detection success
[  1213.042] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[  1213.042] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[  1213.042] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
[  1213.042] (II) RADEON(0): Added native panel mode: 1280x800
[  1213.046] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0

Offline

#4 2011-08-01 14:27:08

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

[  1201.884] Kernel command line: root=/dev/sda2 ro nomodeset

drop nomodeset from menu.lst

Give what you have. To someone, it may be better than you dare to think.

Offline

#5 2011-08-01 14:51:49

mastermind-mp
Member
Registered: 2011-07-30
Posts: 5

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

Works smile
Thank you very much smile

Offline

#6 2011-08-11 16:16:58

ewqdsacxz
Member
Registered: 2011-08-11
Posts: 1

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

Hope this doesn't count as necromancy, but I'm having the same problem (I've checked /var/log/Xorg.0.log, can't see any graphics related complaints or nomodeset):

gnome-session-is-accelerated: No hardware 3D support.

But

glxinfo | grep rendering
direct-rendering: Yes

glxgears:
GL_RENDERER = Gallium 0.4 on softpipe
[...]

I'm out of my depth, but I guess this means that it's not doing 3d acceleration in 'hardware'? But then why 'direct-rendering: Yes'?

Could anyone suggest anything to try?

Offline

#7 2011-09-05 21:04:06

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 68

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

Hi. I have the same problem. I've installed Arch yesterday and gnome-shell was running. Then I've installed systemd and added gdm.service. All still fine. Did further configuration i.e. installing Virtualbox, ... Then today, when I've started gnome starts in the fallback mode.
.xsession.org

/etc/gdm/Xsession: Beginning session setup...
Failure: Module initalization failed
/etc/gdm/Xsession: ssh-agent not found!
/etc/gdm/Xsession: Setup done, will execute: gnome-session
gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[2173]: WARNING: Session 'gnome' runnable check failed: Exited with code 1

Xorg.0.log: http://pastebin.com/wNKq5HvU

glxinfo | grep OpenGL

OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe
OpenGL version string: 2.1 Mesa 7.11
OpenGL shading language version string: 1.20
OpenGL extensions:

Why the vendor string is "VMware, Inc."? Ok there were vbox modules in the list of modules in rc.conf. after removing, it looks like

OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV730
OpenGL version string: 2.1 Mesa 7.11
OpenGL shading language version string: 1.20

Also starting gnome-shell manually does not work as a normal user.

gnome-shell --replace
failed to create drawable

(gnome-shell:3377): Clutter-CRITICAL **: Unable to initialize Clutter: Unable to select the newly created GLX context
Window manager error: Unable to initialize Clutter.

When I open a root terminal, then gnome-shell starts properly calling 'gnome-shell --replace'.

Last edited by lasombra (2011-09-10 22:07:53)

Offline

#8 2011-09-08 17:38:45

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 68

Re: [GNOME3] Gnome3 switches to Fallback Mode after removing Catalyst

I start gdm with systemd so I've added root to group "video", which solved the problem for me.

Last edited by lasombra (2012-01-17 20:03:22)

Offline

Pages: 1

Board footer

Powered by FluxBB