You are not logged in.
- Topics: Active | Unanswered
#1 2011-10-01 10:12:24
- theseus
- Member
- Registered: 2011-07-20
- Posts: 19
Boot hangs at "Triggering uevents" when on battery
Hello,
I have a MacBook Pro 4,1.
When I boot with the external charger, the boot sequence is fine, nothing to report.
When I boot on battery, the boot sequence hangs at "Triggering uevents..." and never comes back. If it's in that hanging state and I plug the external charger, the boot sequence restarts with error messages that go too fast for me to read them (something to do with modprobe, nothing more than that).
I checked at dmesg. I can see the "hanging period" but once it restarts, I don't see anything wrong, just like if nothing would have happened.
Where could this come from?
Thanks a lot!
Offline
#2 2011-10-01 11:39:42
- Spider.007
- Member
- Registered: 2004-06-20
- Posts: 1,175
Re: Boot hangs at "Triggering uevents" when on battery
Can you post the output from dmesg when it hung during booting? Could you append `printk.time=1` to your kernel line so we can see the timings? Any additional messages might end up in /var/log/boot, can you post the output from the last boot?
Offline
#3 2011-10-03 21:35:31
- theseus
- Member
- Registered: 2011-07-20
- Posts: 19
Re: Boot hangs at "Triggering uevents" when on battery
Here is dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ecd3000 (usable)
[ 0.000000] BIOS-e820: 000000007ecd3000 - 000000007eed4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eed4000 - 000000007ef87000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef87000 - 000000007ef89000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ef89000 - 000000007fec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fec3000 - 000000007fec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fec5000 - 000000007fec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fec8000 - 000000007fecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fecb000 - 000000007fecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fecc000 - 000000007fedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fedf000 - 000000007fef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef9000 - 000000007feff000 (reserved)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro4,1/Mac-F42C86C8, BIOS MBP41.88Z.00C1.B03.0802271651 02/27/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ecd3 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 7eab7000 - 7ecc3000
[ 0.000000] Allocated new RAMDISK: 375f2000 - 377fdd49
[ 0.000000] Move RAMDISK from 000000007eab7000 - 000000007ecc2d48 to 375f2000 - 377fdd48
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 7feee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 7feec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 7fee1000 0498E (v01 APPLE MacBookP 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 7fecc000 00040
[ 0.000000] ACPI: HPET 7feeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 7feea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 7fee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 7fee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 7fee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 7fee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 7fec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1140MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ecd3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ecd3
[ 0.000000] On node 0 totalpages: 519266
[ 0.000000] free_area_init_node: node 0, pgdat c05adc80, node_mem_map f6611200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2282 pages used for memmap
[ 0.000000] HighMem zone: 289771 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
[ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515208
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/35bf4615-b178-44a9-ae49-dce70ca7b26c printk.time=1 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8309808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ecd3)
[ 0.000000] Memory: 2043376k/2077516k available (3415k kernel code, 33688k reserved, 1407k data, 500k init, 1168212k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
[ 0.000000] .data : 0xc0455cd5 - 0xc05b5980 (1407 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0455cd5 (3415 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2493.384 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.55 BogoMIPS (lpj=8311280)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003376] Security Framework initialized
[ 0.003381] AppArmor: AppArmor disabled by boot time parameter
[ 0.003399] Mount-cache hash table entries: 512
[ 0.003577] Initializing cgroup subsys cpuacct
[ 0.003589] Initializing cgroup subsys memory
[ 0.003598] Initializing cgroup subsys devices
[ 0.003600] Initializing cgroup subsys freezer
[ 0.003602] Initializing cgroup subsys net_cls
[ 0.003603] Initializing cgroup subsys blkio
[ 0.003639] CPU: Physical Processor ID: 0
[ 0.003641] CPU: Processor Core ID: 0
[ 0.003644] mce: CPU supports 6 MCE banks
[ 0.003651] CPU0: Thermal monitoring enabled (TM2)
[ 0.003654] using mwait in idle threads.
[ 0.004361] ACPI: Core revision 20110413
[ 0.008716] ftrace: allocating 15364 entries in 31 pages
[ 0.010037] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.010406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044573] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.046664] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.046664] ... version: 2
[ 0.046664] ... bit width: 40
[ 0.046664] ... generic registers: 2
[ 0.046664] ... value mask: 000000ffffffffff
[ 0.046664] ... max period: 000000007fffffff
[ 0.046664] ... fixed-purpose events: 3
[ 0.046664] ... event mask: 0000000700000003
[ 0.063478] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.090007] CPU 1 irqstacks, hard=f54ca000 soft=f54cc000
[ 0.090008] Booting Node 0, Processors #1 Ok.
[ 0.090011] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.186680] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.193324] Brought up 2 CPUs
[ 0.193327] Total of 2 processors activated (9978.83 BogoMIPS).
[ 0.195115] devtmpfs: initialized
[ 0.195115] PM: Registering ACPI NVS region at 7ecd3000 (2101248 bytes)
[ 0.195115] PM: Registering ACPI NVS region at 7ef87000 (8192 bytes)
[ 0.195115] PM: Registering ACPI NVS region at 7fec3000 (8192 bytes)
[ 0.195115] PM: Registering ACPI NVS region at 7fec8000 (12288 bytes)
[ 0.195115] PM: Registering ACPI NVS region at 7fecc000 (77824 bytes)
[ 0.195115] print_constraints: dummy:
[ 0.195115] NET: Registered protocol family 16
[ 0.195115] ACPI: bus type pci registered
[ 0.195115] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.195115] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.195115] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.195115] PCI: Using MMCONFIG for extended config space
[ 0.195115] PCI: Using configuration type 1 for base access
[ 0.197003] bio: create slab <bio-0> at 0
[ 0.197498] ACPI: EC: EC description table is found, configuring boot EC
[ 0.198044] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.206938] ACPI: SSDT 7fecac18 00382 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.207124] ACPI: Dynamic OEM Table Load:
[ 0.207126] ACPI: SSDT (null) 00382 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.207228] ACPI: SSDT 7fec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.207400] ACPI: Dynamic OEM Table Load:
[ 0.207402] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.226853] ACPI: SSDT 7fec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.227031] ACPI: Dynamic OEM Table Load:
[ 0.227034] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.227120] ACPI: SSDT 7fec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.227290] ACPI: Dynamic OEM Table Load:
[ 0.227292] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.246794] ACPI: Interpreter enabled
[ 0.246799] ACPI: (supports S0 S3 S4 S5)
[ 0.246816] ACPI: Using IOAPIC for interrupt routing
[ 0.253562] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.253698] ACPI: No dock devices found.
[ 0.253700] HEST: Table not found.
[ 0.253703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.254046] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.256813] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.256815] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.256818] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.256821] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.256835] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.256875] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.256907] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.256910] pci 0000:00:01.0: PME# disabled
[ 0.256966] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.257074] pci 0000:00:1a.0: reg 20: [io 0x80c0-0x80df]
[ 0.257135] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.257232] pci 0000:00:1a.1: reg 20: [io 0x80a0-0x80bf]
[ 0.257329] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.257375] pci 0000:00:1a.7: reg 10: [mem 0x9b504c00-0x9b504fff]
[ 0.257541] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.257548] pci 0000:00:1a.7: PME# disabled
[ 0.257588] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.257610] pci 0000:00:1b.0: reg 10: [mem 0x9b500000-0x9b503fff 64bit]
[ 0.257724] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.257730] pci 0000:00:1b.0: PME# disabled
[ 0.257765] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.257944] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.257951] pci 0000:00:1c.0: PME# disabled
[ 0.258003] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.258173] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.258179] pci 0000:00:1c.2: PME# disabled
[ 0.258218] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.258309] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.258315] pci 0000:00:1c.4: PME# disabled
[ 0.258355] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.258480] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.258486] pci 0000:00:1c.5: PME# disabled
[ 0.258535] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.258637] pci 0000:00:1d.0: reg 20: [io 0x8080-0x809f]
[ 0.258718] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.258829] pci 0000:00:1d.1: reg 20: [io 0x8060-0x807f]
[ 0.258910] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.259038] pci 0000:00:1d.2: reg 20: [io 0x8040-0x805f]
[ 0.259122] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.259162] pci 0000:00:1d.7: reg 10: [mem 0x9b504800-0x9b504bff]
[ 0.259337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.259344] pci 0000:00:1d.7: PME# disabled
[ 0.259386] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.259492] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.259642] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.259648] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.259658] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.259716] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.259749] pci 0000:00:1f.1: reg 10: [io 0x8108-0x810f]
[ 0.259773] pci 0000:00:1f.1: reg 14: [io 0x811c-0x811f]
[ 0.259792] pci 0000:00:1f.1: reg 18: [io 0x8100-0x8107]
[ 0.259809] pci 0000:00:1f.1: reg 1c: [io 0x8118-0x811b]
[ 0.259825] pci 0000:00:1f.1: reg 20: [io 0x80e0-0x80ef]
[ 0.259908] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
[ 0.259938] pci 0000:00:1f.2: reg 10: [io 0x80f8-0x80ff]
[ 0.259951] pci 0000:00:1f.2: reg 14: [io 0x8114-0x8117]
[ 0.259975] pci 0000:00:1f.2: reg 18: [io 0x80f0-0x80f7]
[ 0.260005] pci 0000:00:1f.2: reg 1c: [io 0x8110-0x8113]
[ 0.260018] pci 0000:00:1f.2: reg 20: [io 0x8020-0x802f]
[ 0.260031] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.260071] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260080] pci 0000:00:1f.2: PME# disabled
[ 0.260103] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.260137] pci 0000:00:1f.3: reg 10: [mem 0x9b505000-0x9b5050ff]
[ 0.260202] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.260325] pci 0000:01:00.0: [10de:0407] type 0 class 0x000300
[ 0.260340] pci 0000:01:00.0: reg 10: [mem 0x92000000-0x92ffffff]
[ 0.260356] pci 0000:01:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.260370] pci 0000:01:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit]
[ 0.260381] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]
[ 0.260391] pci 0000:01:00.0: reg 30: [mem 0x93000000-0x9301ffff pref]
[ 0.260457] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.260460] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.260463] pci 0000:00:01.0: bridge window [mem 0x90000000-0x930fffff]
[ 0.260467] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.260542] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.260549] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.260556] pci 0000:00:1c.0: bridge window [mem 0x9b400000-0x9b4fffff]
[ 0.260565] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.260673] pci 0000:00:1c.2: PCI bridge to [bus 03-0a]
[ 0.260680] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.260689] pci 0000:00:1c.2: bridge window [mem 0x97400000-0x9b3fffff]
[ 0.260705] pci 0000:00:1c.2: bridge window [mem 0x93100000-0x970fffff 64bit pref]
[ 0.261026] pci 0000:0b:00.0: [14e4:4328] type 0 class 0x000280
[ 0.261106] pci 0000:0b:00.0: reg 10: [mem 0x97300000-0x97303fff 64bit]
[ 0.261447] pci 0000:0b:00.0: supports D1 D2
[ 0.261448] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.261464] pci 0000:0b:00.0: PME# disabled
[ 0.261652] pci 0000:00:1c.4: PCI bridge to [bus 0b-0b]
[ 0.261657] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.261664] pci 0000:00:1c.4: bridge window [mem 0x97300000-0x973fffff]
[ 0.261673] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.261906] pci 0000:0c:00.0: [11ab:436a] type 0 class 0x000200
[ 0.262062] pci 0000:0c:00.0: reg 10: [mem 0x97200000-0x97203fff 64bit]
[ 0.262136] pci 0000:0c:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.262442] pci 0000:0c:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.262734] pci 0000:0c:00.0: supports D1 D2
[ 0.262736] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.262759] pci 0000:0c:00.0: PME# disabled
[ 0.262957] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
[ 0.262962] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.262969] pci 0000:00:1c.5: bridge window [mem 0x97200000-0x972fffff]
[ 0.262979] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.263042] pci 0000:0d:03.0: [104c:8025] type 0 class 0x000c00
[ 0.263075] pci 0000:0d:03.0: reg 10: [mem 0x97104000-0x971047ff]
[ 0.263100] pci 0000:0d:03.0: reg 14: [mem 0x97100000-0x97103fff]
[ 0.263200] pci 0000:0d:03.0: supports D1 D2
[ 0.263201] pci 0000:0d:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.263209] pci 0000:0d:03.0: PME# disabled
[ 0.263290] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
[ 0.263299] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.263306] pci 0000:00:1e.0: bridge window [mem 0x97100000-0x971fffff]
[ 0.263325] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.263327] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.263330] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.263332] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.263334] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.263389] pci_bus 0000:00: on NUMA node 0
[ 0.263392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.263589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.263633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.263677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.263739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.263894] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.264211] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.268725] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.268774] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.268821] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.268867] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.268914] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.268961] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.269007] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.269054] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.269138] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.269141] vgaarb: loaded
[ 0.269142] vgaarb: bridge control possible 0000:01:00.0
[ 0.269225] PCI: Using ACPI for IRQ routing
[ 0.271579] PCI: pci_cache_line_size set to 64 bytes
[ 0.272172] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.272174] reserve RAM buffer: 000000007ecd3000 - 000000007fffffff
[ 0.272269] NetLabel: Initializing
[ 0.272271] NetLabel: domain hash size = 128
[ 0.272272] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.272283] NetLabel: unlabeled traffic allowed by default
[ 0.272296] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.272304] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.272308] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.283331] Switching to clocksource hpet
[ 0.286578] Switched to NOHz mode on CPU #0
[ 0.286630] Switched to NOHz mode on CPU #1
[ 0.288942] pnp: PnP ACPI init
[ 0.288953] ACPI: bus type pnp registered
[ 0.289229] pnp 00:00: [bus 00-ff]
[ 0.289232] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.289234] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.289236] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.289238] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.289240] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.289242] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.289244] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.289246] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.289247] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.289249] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.289253] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.289255] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.289257] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.289259] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.289261] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.289263] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.289265] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.289267] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.289312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.289388] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.289390] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.289392] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.289394] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.289396] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.289398] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.289400] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.289442] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.289445] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.289447] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.289450] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.289452] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.289455] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.289457] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.289460] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289644] pnp 00:02: [io 0x0300-0x031f]
[ 0.289654] pnp 00:02: [irq 6]
[ 0.289690] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.289724] pnp 00:03: [io 0x0000-0x001f]
[ 0.289726] pnp 00:03: [io 0x0081-0x0091]
[ 0.289728] pnp 00:03: [io 0x0093-0x009f]
[ 0.289729] pnp 00:03: [io 0x00c0-0x00df]
[ 0.289731] pnp 00:03: [dma 4]
[ 0.289768] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.289776] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.289813] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.289881] pnp 00:05: [irq 0 disabled]
[ 0.289888] pnp 00:05: [irq 8]
[ 0.289890] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.289945] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.289948] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.289958] pnp 00:06: [io 0x00f0]
[ 0.289965] pnp 00:06: [irq 13]
[ 0.290022] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.290033] pnp 00:07: [io 0x002e-0x002f]
[ 0.290034] pnp 00:07: [io 0x004e-0x004f]
[ 0.290036] pnp 00:07: [io 0x0061]
[ 0.290038] pnp 00:07: [io 0x0063]
[ 0.290039] pnp 00:07: [io 0x0065]
[ 0.290041] pnp 00:07: [io 0x0067]
[ 0.290042] pnp 00:07: [io 0x0070]
[ 0.290044] pnp 00:07: [io 0x0080]
[ 0.290046] pnp 00:07: [io 0x0092]
[ 0.290047] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.290049] pnp 00:07: [io 0x0680-0x069f]
[ 0.290051] pnp 00:07: [io 0x0800-0x080f]
[ 0.290052] pnp 00:07: [io 0x0810-0x0817]
[ 0.290054] pnp 00:07: [io 0x0400-0x047f]
[ 0.290056] pnp 00:07: [io 0x0500-0x053f]
[ 0.290057] pnp 00:07: [io 0x1640-0x164f]
[ 0.290124] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.290126] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.290129] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.290131] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.290133] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.290136] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.290139] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290146] pnp 00:08: [io 0x0070-0x0077]
[ 0.290184] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294166] pnp: PnP ACPI: found 9 devices
[ 0.294167] ACPI: ACPI bus type pnp unregistered
[ 0.330245] pci 0000:0c:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.330249] PCI: max bus depth: 1 pci_try_num: 2
[ 0.330333] pci 0000:00:1c.5: BAR 15: assigned [mem 0x9b600000-0x9b6fffff pref]
[ 0.330337] pci 0000:00:1c.4: BAR 15: assigned [mem 0x9b800000-0x9b9fffff 64bit pref]
[ 0.330340] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.330344] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9ba00000-0x9bbfffff 64bit pref]
[ 0.330347] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.330349] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.330352] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.330355] pci 0000:00:01.0: bridge window [mem 0x90000000-0x930fffff]
[ 0.330359] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.330363] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.330368] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.330376] pci 0000:00:1c.0: bridge window [mem 0x9b400000-0x9b4fffff]
[ 0.330385] pci 0000:00:1c.0: bridge window [mem 0x9ba00000-0x9bbfffff 64bit pref]
[ 0.330394] pci 0000:00:1c.2: PCI bridge to [bus 03-0a]
[ 0.330398] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.330405] pci 0000:00:1c.2: bridge window [mem 0x97400000-0x9b3fffff]
[ 0.330412] pci 0000:00:1c.2: bridge window [mem 0x93100000-0x970fffff 64bit pref]
[ 0.330422] pci 0000:00:1c.4: PCI bridge to [bus 0b-0b]
[ 0.330427] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.330435] pci 0000:00:1c.4: bridge window [mem 0x97300000-0x973fffff]
[ 0.330442] pci 0000:00:1c.4: bridge window [mem 0x9b800000-0x9b9fffff 64bit pref]
[ 0.330452] pci 0000:0c:00.0: BAR 6: assigned [mem 0x9b600000-0x9b61ffff pref]
[ 0.330454] pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
[ 0.330459] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.330467] pci 0000:00:1c.5: bridge window [mem 0x97200000-0x972fffff]
[ 0.330474] pci 0000:00:1c.5: bridge window [mem 0x9b600000-0x9b7fffff pref]
[ 0.330483] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[ 0.330485] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.330493] pci 0000:00:1e.0: bridge window [mem 0x97100000-0x971fffff]
[ 0.330499] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.330517] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.330521] pci 0000:00:01.0: setting latency timer to 64
[ 0.330530] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.330536] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.330544] pci 0000:00:1c.0: setting latency timer to 64
[ 0.330555] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.330562] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.330568] pci 0000:00:1c.2: setting latency timer to 64
[ 0.330581] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.330588] pci 0000:00:1c.4: setting latency timer to 64
[ 0.330602] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.330609] pci 0000:00:1c.5: setting latency timer to 64
[ 0.330634] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.330637] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.330650] pci 0000:00:1e.0: setting latency timer to 64
[ 0.330656] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.330658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.330660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.330662] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.330664] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.330666] pci_bus 0000:01: resource 1 [mem 0x90000000-0x930fffff]
[ 0.330669] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.330671] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.330673] pci_bus 0000:02: resource 1 [mem 0x9b400000-0x9b4fffff]
[ 0.330675] pci_bus 0000:02: resource 2 [mem 0x9ba00000-0x9bbfffff 64bit pref]
[ 0.330677] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.330679] pci_bus 0000:03: resource 1 [mem 0x97400000-0x9b3fffff]
[ 0.330681] pci_bus 0000:03: resource 2 [mem 0x93100000-0x970fffff 64bit pref]
[ 0.330683] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.330686] pci_bus 0000:0b: resource 1 [mem 0x97300000-0x973fffff]
[ 0.330688] pci_bus 0000:0b: resource 2 [mem 0x9b800000-0x9b9fffff 64bit pref]
[ 0.330690] pci_bus 0000:0c: resource 0 [io 0x5000-0x5fff]
[ 0.330692] pci_bus 0000:0c: resource 1 [mem 0x97200000-0x972fffff]
[ 0.330694] pci_bus 0000:0c: resource 2 [mem 0x9b600000-0x9b7fffff pref]
[ 0.330696] pci_bus 0000:0d: resource 1 [mem 0x97100000-0x971fffff]
[ 0.330698] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.330701] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.330703] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.330705] pci_bus 0000:0d: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.330739] NET: Registered protocol family 2
[ 0.330792] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.330969] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.331275] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.331431] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.331433] TCP reno registered
[ 0.331436] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.331442] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.331528] NET: Registered protocol family 1
[ 0.331765] pci 0000:01:00.0: Boot video device
[ 0.331985] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.332017] Unpacking initramfs...
[ 0.363690] Freeing initrd memory: 2096k freed
[ 0.364294] apm: BIOS not found.
[ 0.364433] audit: initializing netlink socket (disabled)
[ 0.364444] type=2000 audit(1317677036.363:1): initialized
[ 0.369563] highmem bounce pool size: 64 pages
[ 0.369568] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.377836] VFS: Disk quotas dquot_6.5.2
[ 0.377912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.378010] msgmni has been set to 1713
[ 0.378215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.378252] io scheduler noop registered
[ 0.378254] io scheduler deadline registered
[ 0.378265] io scheduler cfq registered (default)
[ 0.378381] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.378410] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.378504] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.378562] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.378675] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.378738] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.378918] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.378979] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.379096] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.379173] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.379300] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.379303] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.379306] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.379339] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.379346] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.379370] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.379376] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.379400] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.379402] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[ 0.379409] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.379439] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.379441] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
[ 0.379448] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.379552] intel_idle: MWAIT substates: 0x3122220
[ 0.379554] intel_idle: does not run on family 6 model 23
[ 0.379559] ERST: Table is not found!
[ 0.379571] isapnp: Scanning for PnP cards...
[ 0.739291] isapnp: No Plug & Play device found
[ 0.739350] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.927047] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.927948] i8042: No controller found
[ 0.928095] mousedev: PS/2 mouse device common for all mice
[ 0.928151] rtc_cmos 00:08: RTC can wake from S4
[ 0.928259] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.928296] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.928313] cpuidle: using governor ladder
[ 0.928315] cpuidle: using governor menu
[ 0.928516] TCP cubic registered
[ 0.928519] NET: Registered protocol family 17
[ 0.928525] Registering the dns_resolver key type
[ 0.928538] Using IPI No-Shortcut mode
[ 0.928607] PM: Hibernation image not present or could not be loaded.
[ 0.928611] registered taskstats version 1
[ 0.932959] rtc_cmos 00:08: setting system clock to 2011-10-03 21:23:57 UTC (1317677037)
[ 0.933033] Initializing network drop monitor service
[ 0.933123] Freeing unused kernel memory: 500k freed
[ 0.933306] Write protecting the kernel text: 3416k
[ 0.933358] Write protecting the kernel read-only data: 1036k
[ 0.943743] udevd[58]: starting version 173
[ 0.973182] usbcore: registered new interface driver usbfs
[ 0.973209] usbcore: registered new interface driver hub
[ 0.977488] usbcore: registered new device driver usb
[ 0.978451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.978492] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.978516] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.978522] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.978544] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.978588] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.989405] SCSI subsystem initialized
[ 0.992211] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.992236] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x9b504c00
[ 1.003952] libata version 3.00 loaded.
[ 1.010132] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.010362] hub 1-0:1.0: USB hub found
[ 1.010367] hub 1-0:1.0: 4 ports detected
[ 1.010465] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 1.010488] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.010493] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.010501] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.010540] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.014436] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.014455] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9b504800
[ 1.026689] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.026808] hub 2-0:1.0: USB hub found
[ 1.026812] hub 2-0:1.0: 6 ports detected
[ 1.026897] ata_piix 0000:00:1f.1: version 2.13
[ 1.026909] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.026912] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.026919] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.026966] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.027234] scsi0 : ata_piix
[ 1.027464] scsi1 : ata_piix
[ 1.027892] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21
[ 1.027895] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21
[ 1.027918] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.027927] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.066637] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.183343] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 1.183343] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 420.097943] Switching to clocksource tsc
[ 420.112499] scsi2 : ata_piix
[ 420.112599] scsi3 : ata_piix
[ 420.113238] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18
[ 420.113240] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18
[ 420.113262] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 420.113276] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 420.113286] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 420.113342] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 420.113400] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000080c0
[ 420.113540] hub 3-0:1.0: USB hub found
[ 420.113543] hub 3-0:1.0: 2 ports detected
[ 420.113625] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 420.113643] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 420.113651] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 420.113657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 420.113726] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000080a0
[ 420.113849] hub 4-0:1.0: USB hub found
[ 420.113852] hub 4-0:1.0: 2 ports detected
[ 420.113936] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 420.113953] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 420.113959] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 420.113965] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 420.114016] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00008080
[ 420.114147] hub 5-0:1.0: USB hub found
[ 420.114151] hub 5-0:1.0: 2 ports detected
[ 420.114226] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 420.114243] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 420.114251] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 420.114262] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 420.114316] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00008060
[ 420.114451] hub 6-0:1.0: USB hub found
[ 420.114455] hub 6-0:1.0: 2 ports detected
[ 420.114535] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 420.114549] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 420.114556] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 420.114562] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 420.114622] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00008040
[ 420.114756] hub 7-0:1.0: USB hub found
[ 420.114759] hub 7-0:1.0: 2 ports detected
[ 420.119150] ata1.00: both IDENTIFYs aborted, assuming NODEV
[ 420.281068] ata3.00: ATA-8: ST95005620AS, SD26, max UDMA/133
[ 420.281071] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 420.294461] ata3.00: configured for UDMA/133
[ 420.294566] scsi 2:0:0:0: Direct-Access ATA ST95005620AS SD26 PQ: 0 ANSI: 5
[ 420.296939] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 420.296981] sd 2:0:0:0: [sda] Write Protect is off
[ 420.296984] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 420.297002] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 420.297839] sda: sda1 sda2 sda3 sda4
[ 420.298129] sd 2:0:0:0: [sda] Attached SCSI disk
[ 420.383307] usb 2-4: new high speed USB device number 3 using ehci_hcd
[ 420.823309] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 420.995619] hub 3-1:1.0: USB hub found
[ 420.997584] hub 3-1:1.0: 3 ports detected
[ 421.226636] usb 5-1: new low speed USB device number 2 using uhci_hcd
[ 421.452649] input: HID 1241:1177 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input0
[ 421.452708] generic-usb 0003:1241:1177.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1d.0-1/input0
[ 421.452720] usbcore: registered new interface driver usbhid
[ 421.452721] usbhid: USB HID core driver
[ 421.498616] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 421.639971] usb 7-1: new low speed USB device number 2 using uhci_hcd
[ 421.955983] udevd[252]: starting version 173
[ 422.050017] usb 7-2: new full speed USB device number 3 using uhci_hcd
[ 422.099779] ACPI: acpi_idle registered with cpuidle
[ 422.104256] Monitor-Mwait will be used to enter C-1 state
[ 422.104286] Monitor-Mwait will be used to enter C-2 state
[ 422.104306] Monitor-Mwait will be used to enter C-3 state
[ 422.104313] Marking TSC unstable due to TSC halts in idle
[ 422.104663] Switching to clocksource hpet
[ 422.105811] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input1
[ 422.105818] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 422.106557] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 422.106624] ACPI: AC Adapter [ADP1] (on-line)
[ 422.108549] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 422.108573] ACPI: Lid Switch [LID0]
[ 422.108615] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 422.108619] ACPI: Power Button [PWRB]
[ 422.108659] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 422.108663] ACPI: Sleep Button [SLPB]
[ 422.108713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 422.108717] ACPI: Power Button [PWRF]
[ 422.136813] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 422.173743] sky2: driver version 1.28
[ 422.173816] sky2 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 422.173888] sky2 0000:0c:00.0: setting latency timer to 64
[ 422.173971] sky2 0000:0c:00.0: Yukon-2 EC Ultra chip revision 3
[ 422.174889] sky2 0000:0c:00.0: irq 45 for MSI/MSI-X
[ 422.175880] Linux agpgart interface v0.103
[ 422.175935] sky2 0000:0c:00.0: eth0: addr 00:1f:5b:e8:6a:49
[ 422.183322] iTCO_vendor_support: vendor-support=0
[ 422.201775] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 422.201780] ACPI: Battery Slot [BAT0] (battery present)
[ 422.213464] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 422.227926] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 422.234955] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 422.234973] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
[ 422.257509] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
[ 422.257527] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243)
[ 422.257547] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x08, vendor 0x4243)
[ 422.257564] ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
[ 422.257580] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
[ 422.267627] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 422.267710] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 422.267766] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 422.272389] firewire_ohci 0000:0d:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 422.287184] applesmc: SM0x\xffffffc6: read arg fail
[ 422.293634] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 422.293697] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 422.293743] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 422.314765] usb 3-1.1: new full speed USB device number 3 using uhci_hcd
[ 422.323401] firewire_ohci: Added fw-ohci device 0000:0d:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 422.332406] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[ 422.343322] cfg80211: Calling CRDA to update world regulatory domain
[ 422.369879] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 422.369951] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 422.373211] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 422.393675] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[ 422.460889] applesmc: key=262 fan=2 temp=15 acc=1 lux=2 kbd=1
[ 422.460892] applesmc: init_smcreg() took 50 ms
[ 422.465663] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 422.465969] Registered led device: b43-phy0::tx
[ 422.465989] Registered led device: b43-phy0::rx
[ 422.466007] Registered led device: b43-phy0::radio
[ 422.466021] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 422.474579] Bluetooth: Core ver 2.16
[ 422.474606] NET: Registered protocol family 31
[ 422.474608] Bluetooth: HCI device and connection manager initialized
[ 422.474611] Bluetooth: HCI socket layer initialized
[ 422.474613] Bluetooth: L2CAP socket layer initialized
[ 422.479325] Bluetooth: SCO socket layer initialized
[ 422.483143] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 422.487602] usbcore: registered new interface driver btusb
[ 422.489938] nvidia: module license 'NVIDIA' taints kernel.
[ 422.489941] Disabling lock debugging due to kernel taint
[ 422.513750] usb 3-1.2: new full speed USB device number 4 using uhci_hcd
[ 422.536839] input: applesmc as /devices/platform/applesmc.768/input/input9
[ 422.537293] Registered led device: smc::kbd_backlight
[ 422.542759] hub 3-1:1.0: unable to enumerate USB device on port 2
[ 422.798242] input: bcm5974 as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input10
[ 422.798326] usbcore: registered new interface driver bcm5974
[ 422.808760] Linux media interface: v0.10
[ 422.812375] Linux video capture interface: v2.00
[ 422.815390] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[ 422.817985] input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11
[ 422.818048] usbcore: registered new interface driver uvcvideo
[ 422.818049] USB Video Class driver (v1.1.0)
[ 422.823419] firewire_core: created device fw0: GUID 001f5bfffe2c06b8, S800
[ 422.828153] apple 0003:05AC:8242.0002: hiddev0,hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 422.834039] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input12
[ 422.834103] apple 0003:05AC:0231.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 422.840003] apple 0003:05AC:0231.0004: hidraw3: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input1
[ 423.454552] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 423.454561] nvidia 0000:01:00.0: setting latency timer to 64
[ 423.454567] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 423.454697] NVRM: loading NVIDIA UNIX x86 Kernel Module 280.13 Wed Jul 27 16:55:43 PDT 2011
[ 434.193427] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 434.287047] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 434.297950] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 435.539757] NET: Registered protocol family 10
[ 436.765275] NET: Registered protocol family 4
[ 436.785117] NET: Registered protocol family 5
[ 437.083549] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 437.149055] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 442.017591] sky2 0000:0c:00.0: eth0: enabling interface
[ 442.018024] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 442.391793] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 442.393823] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 445.856898] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 445.945104] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 446.007438] sky2 0000:0c:00.0: eth0: disabling interface
[ 446.016754] sky2 0000:0c:00.0: eth0: enabling interface
[ 446.017204] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 446.243576] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 446.331740] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 450.040716] wlan0: authenticate with 00:c0:49:f2:3c:26 (try 1)
[ 450.043359] wlan0: authenticated
[ 450.043573] wlan0: associate with 00:c0:49:f2:3c:26 (try 1)
[ 450.045910] wlan0: RX AssocResp from 00:c0:49:f2:3c:26 (capab=0x411 status=0 aid=2)
[ 450.045913] wlan0: associated
[ 450.046895] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 450.072126] padlock_aes: VIA PadLock not detected.
[ 450.092665] Intel AES-NI instructions are not detected.
[ 450.327473] fuse init (API version 7.16)
[ 460.590004] wlan0: no IPv6 routers presentAnd the /var/log/boot:
Mon Oct 3 23:31:10 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Bringing up loopback interface ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Checking Filesystems ^[[71G [BUSY] /dev/sda3: clean, 184675/480496 files, 1427211/1921775 blocks
Mon Oct 3 23:31:10 2011: /dev/sda1: clean, 36/26104 files, 25973/104388 blocks
Mon Oct 3 23:31:10 2011: /dev/sda4 has been mounted 21 times without being checked, check forced.
Mon Oct 3 23:31:10 2011: \002/dev/sda4: 25131/30023680 files (1.7% non-contiguous), 37964449/120081858 blocks
Mon Oct 3 23:31:10 2011: ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Remounting Root Read/Write ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Creating mtab ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Mounting Local Filesystems ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Activating Swap ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Configuring Time Zone ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Initializing Random Seed ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:10 2011: :: Removing Leftover Files ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Setting Hostname: genmac ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Setting Locale: en_US.UTF-8 ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Setting Consoles to UTF-8 mode ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Loading Keyboard Map: be-latin1 ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Saving dmesg Log ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: INIT: Entering runlevel: 5
Mon Oct 3 23:31:11 2011: :: Starting Syslog-NG ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Starting Network ^[[71G [BUSY] Cannot find device "up"
Mon Oct 3 23:31:11 2011: ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Mounting Network Filesystems ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Starting Cron Daemon ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Starting D-BUS system messagebus ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: :: Restoring ALSA Levels ^[[71G [BUSY] ^[[71G [DONE]
Mon Oct 3 23:31:11 2011: Offline
#4 2011-10-03 21:46:58
- lagagnon
- Member
- From: an Island in the Pacific...
- Registered: 2009-12-10
- Posts: 1,087
- Website
Re: Boot hangs at "Triggering uevents" when on battery
It appears to me the fault lies with the ATA/SCSI interface or your hard drive setup. There is a 419 second lag here:
[ 1.066637] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.183343] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 1.183343] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 420.097943] Switching to clocksource tsc
[ 420.112499] scsi2 : ata_piix
[ 420.112599] scsi3 : ata_piix
[ 420.113238] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18
[ 420.113240] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18
I suggest you might want to go into your BIOS setup and reset the BIOS to its defaults and see if that makes any difference. Otherwise research the BIOS settings concerning you hard drives and try a few different settings.
Philosophy is looking for a black cat in a dark room. Metaphysics is looking for a black cat in a dark room that isn't there. Religion is looking for a black cat in a dark room that isn't there and shouting "I found it!". Science is looking for a black cat in a dark room with a flashlight.
Offline
#5 2011-10-08 15:17:12
- theseus
- Member
- Registered: 2011-07-20
- Posts: 19
Re: Boot hangs at "Triggering uevents" when on battery
Thanks, but problem: it's a Mac, so I don't have a normal BIOS and as I don't have an EFI partition, I can't do it...
I guess I'll have to live with it...
Offline
#6 2011-12-17 17:17:16
- theseus
- Member
- Registered: 2011-07-20
- Posts: 19
Re: Boot hangs at "Triggering uevents" when on battery
Sorry to "re-open" the post but is there no way to put a timer on this "Triggering uevents..." part?
Because when I want to boot my laptop, I need to keep it plugged... not really convenient for a laptop.
Any help is much appreciated!
Offline