vlc, mplayer... segmentation fault

greengold · 2010-07-22 12:21:29

guys, Im tired of this...
I had some troubles with last update which were solved here
and now I have another couple of problems :

mplayer, vlc says segmentation fault any time Im trying to play a video.
KDE desktop enviroment is terribly painted (flux is ok)
glxgears (in flux) gives 60 fps !! (it was 250 before, I know that somethink was wrong but I could not figure it out before and now its.....)

mplayer that_70s_show.6x04
Segmentation fault

vlc that_70s_show.6x04
VLC media player 1.1.0 The Luggage (revision exported)
Segmentation fault

I did try reinstall vlc by pacman -Rs vlc but its the same...
I do remember times when arch was pretty stable, so is it so now or Im the one who cause this ?!
thanks in advance!

Inxsible · 2010-07-22 12:26:36

Being frustrated is not going to help you. You are using a rolling release distro, so you should expect and be prepared for breakage occasionally.

Having said that, I don't have a problem with either vlc or mplayer. which means its only at your end.

When you get segmentation faults, post the error logs here so we may be better able to help you.

Try to start the programs through command line which will give you some output on a segfault. You can also see the xorg logs for errors and post that here as well.

karol · 2010-07-22 12:32:26

@ Inxsible
Have you seen what his problem was? deleted GLIBC.

Last edited by karol (2010-07-22 12:32:47)

greengold · 2010-07-22 12:43:22

yes, thats right...
but post above contain all that vlc and mplayer gives to me in console
also dolphin is crashing when its trying to preview any video file, amarok is unable to start too...

this is cat /var/log/Xorg.0.log

[    30.721] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    30.735] 
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[    30.735] X Protocol Version 11, Revision 0
[    30.735] Build Operating System: Linux 2.6.34-ARCH i686 
[    30.735] Current Operating System: Linux server 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686
[    30.735] Kernel command line: root=/dev/disk/by-uuid/b7dbc8ac-e311-47b8-b1d4-5eb3cf9ad5bc ro
[    30.735] Build Date: 21 June 2010  11:54:27AM
[    30.735]  
[    30.736] Current version of pixman: 0.18.2
[    30.736]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    30.736] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.736] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 14:26:03 2010
[    30.789] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    30.790] (==) No Layout section.  Using the first Screen section.
[    30.790] (==) No screen section available. Using defaults.
[    30.790] (**) |-->Screen "Default Screen Section" (0)
[    30.790] (**) |   |-->Monitor "<default monitor>"
[    30.791] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    30.791] (==) Automatically adding devices
[    30.791] (==) Automatically enabling devices
[    30.826] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    30.826]    Entry deleted from font path.
[    30.826] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    30.826]    Entry deleted from font path.
[    30.858] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[    30.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.858] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.858] (II) Loader magic: 0x81e9d00
[    30.858] (II) Module ABI versions:
[    30.858]    X.Org ANSI C Emulation: 0.4
[    30.858]    X.Org Video Driver: 7.0
[    30.858]    X.Org XInput driver : 9.0
[    30.858]    X.Org Server Extension : 3.0
[    30.875] (--) PCI:*(0:0:2:0) 8086:2572:1043:80a5 Intel Corporation 82865G Integrated Graphics Controller rev 2, Mem @ 0xf0000000/134217728, 0xfbe80000/524288, I/O @ 0x0000dc00/8
[    30.884] (--) PCI: (0:1:11:0) 109e:036e:0000:0000 Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xfaffe000/4096
[    30.884] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    30.884] (II) LoadModule: "extmod"
[    30.916] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    30.923] (II) Module extmod: vendor="X.Org Foundation"
[    30.923]    compiled for 1.8.1.902, module version = 1.0.0
[    30.923]    Module class: X.Org Server Extension
[    30.923]    ABI class: X.Org Server Extension, version 3.0
[    30.923] (II) Loading extension MIT-SCREEN-SAVER
[    30.923] (II) Loading extension XFree86-VidModeExtension
[    30.923] (II) Loading extension XFree86-DGA
[    30.923] (II) Loading extension DPMS
[    30.923] (II) Loading extension XVideo
[    30.923] (II) Loading extension XVideo-MotionCompensation
[    30.923] (II) Loading extension X-Resource
[    30.923] (II) LoadModule: "dbe"
[    30.923] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    30.924] (II) Module dbe: vendor="X.Org Foundation"
[    30.924]    compiled for 1.8.1.902, module version = 1.0.0
[    30.924]    Module class: X.Org Server Extension
[    30.924]    ABI class: X.Org Server Extension, version 3.0
[    30.924] (II) Loading extension DOUBLE-BUFFER
[    30.924] (II) LoadModule: "glx"
[    30.924] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.930] (II) Module glx: vendor="X.Org Foundation"
[    30.930]    compiled for 1.8.1.902, module version = 1.0.0
[    30.930]    ABI class: X.Org Server Extension, version 3.0
[    30.937] (==) AIGLX enabled
[    30.937] (II) Loading extension GLX
[    30.937] (II) LoadModule: "record"
[    30.937] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    30.938] (II) Module record: vendor="X.Org Foundation"
[    30.938]    compiled for 1.8.1.902, module version = 1.13.0
[    30.938]    Module class: X.Org Server Extension
[    30.938]    ABI class: X.Org Server Extension, version 3.0
[    30.938] (II) Loading extension RECORD
[    30.938] (II) LoadModule: "dri"
[    30.938] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    30.954] (II) Module dri: vendor="X.Org Foundation"
[    30.954]    compiled for 1.8.1.902, module version = 1.0.0
[    30.954]    ABI class: X.Org Server Extension, version 3.0
[    30.954] (II) Loading extension XFree86-DRI
[    30.954] (II) LoadModule: "dri2"
[    30.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.955] (II) Module dri2: vendor="X.Org Foundation"
[    30.955]    compiled for 1.8.1.902, module version = 1.2.0
[    30.955]    ABI class: X.Org Server Extension, version 3.0
[    30.955] (II) Loading extension DRI2
[    30.955] (==) Matched intel as autoconfigured driver 0
[    30.955] (==) Matched vesa as autoconfigured driver 1
[    30.955] (==) Matched fbdev as autoconfigured driver 2
[    30.955] (==) Assigned the driver to the xf86ConfigLayout
[    30.955] (II) LoadModule: "intel"
[    30.974] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    30.988] (II) Module intel: vendor="X.Org Foundation"
[    30.988]    compiled for 1.8.1.902, module version = 2.12.0
[    30.988]    Module class: X.Org Video Driver
[    30.988]    ABI class: X.Org Video Driver, version 7.0
[    30.988] (II) LoadModule: "vesa"
[    30.989] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.994] (II) Module vesa: vendor="X.Org Foundation"
[    30.994]    compiled for 1.8.0, module version = 2.3.0
[    30.994]    Module class: X.Org Video Driver
[    30.994]    ABI class: X.Org Video Driver, version 7.0
[    30.994] (II) LoadModule: "fbdev"
[    31.002] (WW) Warning, couldn't open module fbdev
[    31.002] (II) UnloadModule: "fbdev"
[    31.002] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    31.002] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[    31.002] (II) VESA: driver for VESA chipsets: vesa
[    31.002] (++) using VT number 7

[    31.010] (II) Primary Device is: PCI 00@00:02:0
[    31.010] (WW) Falling back to old probe method for vesa
[    31.012] drmOpenDevice: node name is /dev/dri/card0
[    31.012] drmOpenDevice: open result is 8, (OK)
[    31.012] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    31.012] drmOpenDevice: node name is /dev/dri/card0
[    31.012] drmOpenDevice: open result is 8, (OK)
[    31.012] drmOpenByBusid: drmOpenMinor returns 8
[    31.012] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    31.012] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    31.012] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    31.012] (==) intel(0): RGB weight 888
[    31.012] (==) intel(0): Default visual is TrueColor
[    31.012] (II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
[    31.012] (--) intel(0): Chipset: "865G"
[    31.012] (==) intel(0): video overlay key set to 0x101fe
[    31.119] (II) intel(0): Output VGA1 has no monitor section
[    31.226] (II) intel(0): EDID for output VGA1
[    31.226] (II) intel(0): Manufacturer: ACI  Model: 22a2  Serial#: 16843009
[    31.226] (II) intel(0): Year: 2008  Week: 3
[    31.226] (II) intel(0): EDID Version: 1.3
[    31.226] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    31.226] (II) intel(0): Signal levels configurable
[    31.226] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    31.226] (II) intel(0): Max Image Size [cm]: horiz.: 47  vert.: 30
[    31.226] (II) intel(0): Gamma: 2.20
[    31.226] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    31.226] (II) intel(0): Default color space is primary color space
[    31.226] (II) intel(0): First detailed timing is preferred mode
[    31.226] (II) intel(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
[    31.226] (II) intel(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
[    31.226] (II) intel(0): Supported established timings:
[    31.226] (II) intel(0): 720x400@70Hz
[    31.226] (II) intel(0): 640x480@60Hz
[    31.227] (II) intel(0): 640x480@67Hz
[    31.227] (II) intel(0): 640x480@72Hz
[    31.227] (II) intel(0): 640x480@75Hz
[    31.227] (II) intel(0): 800x600@56Hz
[    31.227] (II) intel(0): 800x600@60Hz
[    31.227] (II) intel(0): 800x600@72Hz
[    31.227] (II) intel(0): 800x600@75Hz
[    31.227] (II) intel(0): 832x624@75Hz
[    31.227] (II) intel(0): 1024x768@60Hz
[    31.227] (II) intel(0): 1024x768@70Hz
[    31.227] (II) intel(0): 1024x768@75Hz
[    31.227] (II) intel(0): 1280x1024@75Hz
[    31.227] (II) intel(0): Manufacturer's mask: 0
[    31.227] (II) intel(0): Supported standard timings:
[    31.227] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    31.227] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    31.227] (II) intel(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    31.227] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    31.227] (II) intel(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    31.227] (II) intel(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    31.227] (II) intel(0): Supported detailed timing:
[    31.227] (II) intel(0): clock: 146.2 MHz   Image Size:  473 x 296 mm
[    31.227] (II) intel(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    31.227] (II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    31.227] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 170 MHz
[    31.227] (II) intel(0): Monitor name: VW222
[    31.227] (II) intel(0): Serial No: 81LMQS026922
[    31.227] (II) intel(0): EDID (in hex):
[    31.227] (II) intel(0):     00ffffffffffff000469a22201010101
[    31.227] (II) intel(0):     031201031e2f1e78eec4f6a3574a9c23
[    31.227] (II) intel(0):     114f54bfef00714f818081409500a940
[    31.227] (II) intel(0):     b3000101010121399030621a274068b0
[    31.227] (II) intel(0):     3600d9281100001c000000fd00384b1f
[    31.227] (II) intel(0):     5111000a202020202020000000fc0056
[    31.227] (II) intel(0):     573232320a20202020202020000000ff
[    31.227] (II) intel(0):     0038314c4d51533032363932320a00c0
[    31.227] (II) intel(0): EDID vendor "ACI", prod id 8866
[    31.227] (II) intel(0): Using EDID range info for horizontal sync
[    31.227] (II) intel(0): Using EDID range info for vertical refresh
[    31.227] (II) intel(0): Printing DDC gathered Modelines:
[    31.227] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    31.227] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    31.227] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    31.227] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    31.227] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    31.227] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    31.227] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    31.228] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    31.228] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    31.228] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    31.228] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    31.228] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    31.228] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    31.228] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    31.228] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    31.228] (II) intel(0): Printing probed modes for output VGA1
[    31.228] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    31.228] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    31.228] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    31.228] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    31.228] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    31.228] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    31.228] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    31.228] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    31.228] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    31.228] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    31.228] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    31.228] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    31.228] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    31.228] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    31.228] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    31.228] (II) intel(0): Output VGA1 connected
[    31.228] (II) intel(0): Using exact sizes for initial modes
[    31.228] (II) intel(0): Output VGA1 using initial mode 1680x1050
[    31.229] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.229] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[    31.229] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[    31.229] (**) intel(0): Display dimensions: (470, 300) mm
[    31.229] (**) intel(0): DPI set to (90, 88)
[    31.229] (II) Loading sub module "fb"
[    31.229] (II) LoadModule: "fb"
[    31.229] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.243] (II) Module fb: vendor="X.Org Foundation"
[    31.243]    compiled for 1.8.1.902, module version = 1.0.0
[    31.243]    ABI class: X.Org ANSI C Emulation, version 0.4
[    31.243] (II) UnloadModule: "vesa"
[    31.243] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    31.243] (==) Depth 24 pixmap format is 32 bpp
[    31.243] (II) intel(0): [DRI2] Setup complete
[    31.243] (II) intel(0): [DRI2]   DRI driver: i915
[    31.243] (**) intel(0): Tiling enabled
[    31.244] (**) intel(0): SwapBuffers wait enabled
[    31.244] (==) intel(0): VideoRam: 131072 KB
[    31.244] (II) intel(0): Allocated new frame buffer 1728x1050 stride 8192, tiled
[    31.258] (II) UXA(0): Driver registered support for the following operations:
[    31.258] (II)         solid
[    31.258] (II)         copy
[    31.258] (II)         composite (RENDER acceleration)
[    31.258] (II)         put_image
[    31.258] (II)         get_image
[    31.269] (==) intel(0): Backing store disabled
[    31.269] (==) intel(0): Silken mouse enabled
[    31.269] (II) intel(0): Initializing HW Cursor
[    31.340] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.340] (==) intel(0): DPMS enabled
[    31.340] (==) intel(0): Intel XvMC decoder disabled
[    31.340] (II) intel(0): Set up overlay video
[    31.340] (II) intel(0): direct rendering: DRI2 Enabled
[    31.341] (--) RandR disabled
[    31.341] (II) Initializing built-in extension Generic Event Extension
[    31.341] (II) Initializing built-in extension SHAPE
[    31.341] (II) Initializing built-in extension MIT-SHM
[    31.341] (II) Initializing built-in extension XInputExtension
[    31.341] (II) Initializing built-in extension XTEST
[    31.341] (II) Initializing built-in extension BIG-REQUESTS
[    31.341] (II) Initializing built-in extension SYNC
[    31.341] (II) Initializing built-in extension XKEYBOARD
[    31.341] (II) Initializing built-in extension XC-MISC
[    31.341] (II) Initializing built-in extension SECURITY
[    31.341] (II) Initializing built-in extension XINERAMA
[    31.341] (II) Initializing built-in extension XFIXES
[    31.341] (II) Initializing built-in extension RENDER
[    31.341] (II) Initializing built-in extension RANDR
[    31.341] (II) Initializing built-in extension COMPOSITE
[    31.341] (II) Initializing built-in extension DAMAGE
[    31.414] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    31.414] (II) AIGLX: enabled GLX_INTEL_swap_event
[    31.414] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    31.414] (II) AIGLX: enabled GLX_SGI_make_current_read
[    31.414] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    31.414] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[    31.414] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.415] (II) intel(0): Setting screen physical size to 444 x 277
[    31.937] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.937] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.937] (II) LoadModule: "evdev"
[    31.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.949] (II) Module evdev: vendor="X.Org Foundation"
[    31.949]    compiled for 1.8.0, module version = 2.4.0
[    31.949]    Module class: X.Org XInput Driver
[    31.949]    ABI class: X.Org XInput driver, version 9.0
[    31.949] (**) Power Button: always reports core events
[    31.949] (**) Power Button: Device: "/dev/input/event2"
[    31.949] (II) Power Button: Found keys
[    31.949] (II) Power Button: Configuring as keyboard
[    31.949] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    31.949] (**) Option "xkb_rules" "evdev"
[    31.949] (**) Option "xkb_model" "evdev"
[    31.949] (**) Option "xkb_layout" "us"
[    31.991] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    31.991] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.991] (**) Power Button: always reports core events
[    31.991] (**) Power Button: Device: "/dev/input/event1"
[    31.991] (II) Power Button: Found keys
[    31.991] (II) Power Button: Configuring as keyboard
[    31.991] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    31.991] (**) Option "xkb_rules" "evdev"
[    31.991] (**) Option "xkb_model" "evdev"
[    31.992] (**) Option "xkb_layout" "us"
[    31.993] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event3)
[    31.993] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    31.994] (**) USB USB Keykoard: always reports core events
[    31.994] (**) USB USB Keykoard: Device: "/dev/input/event3"
[    31.994] (II) USB USB Keykoard: Found keys
[    31.994] (II) USB USB Keykoard: Configuring as keyboard
[    31.994] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
[    31.994] (**) Option "xkb_rules" "evdev"
[    31.994] (**) Option "xkb_model" "evdev"
[    31.994] (**) Option "xkb_layout" "us"
[    31.994] (II) config/udev: Adding input device USB USB Keykoard (/dev/input/event4)
[    31.994] (**) USB USB Keykoard: Applying InputClass "evdev keyboard catchall"
[    31.995] (**) USB USB Keykoard: always reports core events
[    31.995] (**) USB USB Keykoard: Device: "/dev/input/event4"
[    31.995] (II) USB USB Keykoard: Found 1 mouse buttons
[    31.995] (II) USB USB Keykoard: Found scroll wheel(s)
[    31.995] (II) USB USB Keykoard: Found relative axes
[    31.995] (II) USB USB Keykoard: Found absolute axes
[    31.995] (II) USB USB Keykoard: Found keys
[    31.995] (II) USB USB Keykoard: Configuring as mouse
[    31.995] (II) USB USB Keykoard: Configuring as keyboard
[    31.995] (**) USB USB Keykoard: YAxisMapping: buttons 4 and 5
[    31.995] (**) USB USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.995] (II) XINPUT: Adding extended input device "USB USB Keykoard" (type: KEYBOARD)
[    31.995] (**) Option "xkb_rules" "evdev"
[    31.995] (**) Option "xkb_model" "evdev"
[    31.995] (**) Option "xkb_layout" "us"
[    31.995] (EE) USB USB Keykoard: failed to initialize for relative axes.
[    31.995] (II) USB USB Keykoard: initialized for absolute axes.
[    31.996] (II) config/udev: Adding input device USB Mouse               (/dev/input/event5)
[    31.996] (**) USB Mouse              : Applying InputClass "evdev pointer catchall"
[    31.996] (**) USB Mouse              : always reports core events
[    31.996] (**) USB Mouse              : Device: "/dev/input/event5"
[    31.996] (II) USB Mouse              : Found 3 mouse buttons
[    31.996] (II) USB Mouse              : Found scroll wheel(s)
[    31.996] (II) USB Mouse              : Found relative axes
[    31.996] (II) USB Mouse              : Found x and y relative axes
[    31.996] (II) USB Mouse              : Configuring as mouse
[    31.996] (**) USB Mouse              : YAxisMapping: buttons 4 and 5
[    31.996] (**) USB Mouse              : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.996] (II) XINPUT: Adding extended input device "USB Mouse              " (type: MOUSE)
[    31.996] (**) USB Mouse              : (accel) keeping acceleration scheme 1
[    31.996] (**) USB Mouse              : (accel) acceleration profile 0
[    31.996] (**) USB Mouse              : (accel) acceleration factor: 2.000
[    31.996] (**) USB Mouse              : (accel) acceleration threshold: 4
[    31.996] (II) USB Mouse              : initialized for relative axes.
[    31.997] (II) config/udev: Adding input device USB Mouse               (/dev/input/mouse0)
[    31.997] (II) No input driver/identifier specified (ignoring)
[    32.005] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[    32.005] (II) No input driver/identifier specified (ignoring)

this is output from amarok's start :

$ amarok
<unknown program name>(14670)/: Communication problem with  "amarok" , it probably crashed. 
Error message was:  "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.amarok was not provided by any .service files" " 

KCrash: Application 'amarok' crashing...
sock_file=/home/tepo/.kde4/socket-server/kdeinit4__0

about that 60fps ...it have been told me that this (even with 250fps) that ist wrong installed graphic card, but I followed archwiki during instalation and there are just few (I dont know now how many exactly but I guess 2) steps to follow so there in no place for mistake...
which logs should I post too?
thanks for helping me...

greengold · 2010-07-22 12:44:59

karol wrote:

@ Inxsible
Have you seen what his problem was? deleted GLIBC.

yes, but I did install it back

wonder · 2010-07-22 13:49:09

error message was:  "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.amarok was not provided by any .service files" "

this message says that you are not authorized to consolekit. you are not using kdm and you use startx without proper options or that is really missing

exec ck-launch-session startkde

to debug vlc just start it with vlc -vv and play a file. you can also use gdb to start mplayer/vlc and see in which soname is segmenting. and reinstall.

arch is pretty stable and you did something wrong if you managed to have so many files lost.

greengold · 2010-07-22 16:10:32

vlc -vv showed me some missing libralies, so I installed that packages, but Im stil getting

$ vlc -vv
VLC media player 1.1.0 The Luggage (revision exported)
[0x83748fc] main libvlc debug: VLC media player - 1.1.0 The Luggage
[0x83748fc] main libvlc debug: Copyright © 1996-2010 the VideoLAN team
[0x83748fc] main libvlc debug: revision exported
[0x83748fc] main libvlc debug: configured with ./configure  '--prefix=/usr' '--disable-rpath' '--enable-faad' '--enable-v4l' '--enable-snapshot' '--enable-dbus-control' '--enable-nls' '--enable-lirc' '--enable-pvr' '--enable-ncurses' '--enable-mozilla' '--with-live555-tree=/usr/lib/live' '--enable-realrtsp' 'CFLAGS=-march=i686 -mtune=generic -O2 -pipe' 'LDFLAGS=-Wl,--hash-style=gnu -Wl,--as-needed' 'CXXFLAGS=-march=i686 -mtune=generic -O2 -pipe' 'PKG_CONFIG_PATH=/usr/lib/pkgconfig'
[0x83748fc] main libvlc debug: translation test: code is "C"
[0x83748fc] main libvlc debug: checking plugin modules
[0x83748fc] main libvlc debug: loading plugins cache file /usr/lib/vlc/plugins/plugins-04041e-1e8.dat
[0x83748fc] main libvlc warning: cannot read /usr/lib/vlc/plugins/plugins-04041e-1e8.dat (No such file or directory)
[0x83748fc] main libvlc debug: recursively browsing `/usr/lib/vlc/plugins'
Segmentation fault

plugins-04041e-1e8.dat should be part of vlc package which I tried to reinstall several times, vlc-plugin too...
I tried to complete remove and reinstall kde (altough Im using fluxbox),xorg and did Xorg -configure but nothing works.
I guess it will be faster and easier to reinstall whole OS becauce even fixing vlc won't help me with 60fps and mplayer issue
but thanks for hepl guys!
we'll see each other in topic 250fps on Intel GMA which Im intend to create right after reinstallation of Arch
aaach, thanks! (:

Last edited by greengold (2010-07-22 16:11:47)

Inxsible · 2010-07-22 17:08:02

Maybe un-installing vlc and then tracking down each and every vlc related files/folders and deleting them (even under your /home, /home/.config, /home/.local) etc

and then re-installing vlc might help.

wonder · 2010-07-22 17:12:32

Inxsible wrote:

Maybe un-installing vlc and then tracking down each and every vlc related files/folders and deleting them (even under your /home, /home/.config, /home/.local) etc
and then re-installing vlc might help.

he could find out directly if he used gdb to track down the segmentation

Inxsible · 2010-07-22 17:14:22

wonder wrote:

Inxsible wrote:
Maybe un-installing vlc and then tracking down each and every vlc related files/folders and deleting them (even under your /home, /home/.config, /home/.local) etc
and then re-installing vlc might help.
he could find out directly if he used gdb to track down the segmentation

or that

Arch Linux

#1 2010-07-22 12:21:29

vlc, mplayer... segmentation fault

#2 2010-07-22 12:26:36

Re: vlc, mplayer... segmentation fault

#3 2010-07-22 12:32:26

Re: vlc, mplayer... segmentation fault

#4 2010-07-22 12:43:22

Re: vlc, mplayer... segmentation fault

#5 2010-07-22 12:44:59

Re: vlc, mplayer... segmentation fault

#6 2010-07-22 13:49:09

Re: vlc, mplayer... segmentation fault

#7 2010-07-22 16:10:32

Re: vlc, mplayer... segmentation fault

#8 2010-07-22 17:08:02

Re: vlc, mplayer... segmentation fault

#9 2010-07-22 17:12:32

Re: vlc, mplayer... segmentation fault

#10 2010-07-22 17:14:22

Re: vlc, mplayer... segmentation fault

Board footer