You are not logged in.
Hi!
I am new to Linux and have just installed Arch to get to know it.
Through the Arch wiki and help from my good friend and mentor Jonhoo. I have now got the system pretty much set up and ready to go.
However, when trying to connect to my university's wireless network using a netcfg file, I receive an error message.
The netcfg file I've made from Jonhoo's template.
BondStudents (netcfg)
CONNECTION='wireless'
INTERFACE='wlan0'
SECURITY='wpa-configsection'
ESSID='BondStudents'
IP='dhcp'
CONFIGSECTION='
ssid="BondStudents"
key_mgmt=WPA-EAP
eap=PEAP
group=CCMP
pairwise=CCMP
identity="<user>"
password="<password>"
priority=1
ca_path="/etc/ss1/certs"
phase2="auth=MSCHAPV2"
'tail 50 from everything.log after trying to connect
May 18 08:57:27 localhost kernel: [146850.860159] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:27 localhost kernel: [146850.860167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:27 localhost kernel: [146850.860174] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:27 localhost kernel: [146850.860220] cfg80211: Calling CRDA for country: AU
May 18 08:57:27 localhost load-modules.sh: 'platform:regulatory' is not a valid module or alias name
May 18 08:57:27 localhost kernel: [146850.892629] cfg80211: Regulatory domain changed to country: AU
May 18 08:57:27 localhost kernel: [146850.892638] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 18 08:57:27 localhost kernel: [146850.892645] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
May 18 08:57:27 localhost kernel: [146850.892651] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:27 localhost kernel: [146850.892657] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:27 localhost kernel: [146850.892663] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
May 18 08:57:28 localhost kernel: [146851.929263] wlan0: authenticate with 00:1f:9d:db:7b:53 (try 1)
May 18 08:57:28 localhost kernel: [146851.931534] wlan0: authenticated
May 18 08:57:28 localhost kernel: [146851.931714] wlan0: associate with 00:1f:9d:db:7b:53 (try 1)
May 18 08:57:28 localhost kernel: [146851.935468] wlan0: RX AssocResp from 00:1f:9d:db:7b:53 (capab=0x431 status=0 aid=94)
May 18 08:57:28 localhost kernel: [146851.935485] wlan0: associated
May 18 08:57:28 localhost kernel: [146851.936154] cfg80211: Calling CRDA for country: AU
May 18 08:57:28 localhost load-modules.sh: 'platform:regulatory' is not a valid module or alias name
May 18 08:57:28 localhost kernel: [146851.966274] cfg80211: Regulatory domain changed to country: AU
May 18 08:57:28 localhost kernel: [146851.966283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 18 08:57:28 localhost kernel: [146851.966290] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
May 18 08:57:28 localhost kernel: [146851.966296] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:28 localhost kernel: [146851.966302] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:28 localhost kernel: [146851.966307] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
May 18 08:57:30 localhost kernel: [146854.044904] wlan0: deauthenticating from 00:1f:9d:db:7b:53 by local choice (reason=3)
May 18 08:57:30 localhost kernel: [146854.078800] cfg80211: Calling CRDA to update world regulatory domain
May 18 08:57:30 localhost load-modules.sh: 'platform:regulatory' is not a valid module or alias name
May 18 08:57:30 localhost kernel: [146854.108216] cfg80211: World regulatory domain updated:
May 18 08:57:30 localhost kernel: [146854.108226] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 18 08:57:30 localhost kernel: [146854.108235] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.108243] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.108250] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.108258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.108265] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.108312] cfg80211: Calling CRDA for country: AU
May 18 08:57:30 localhost load-modules.sh: 'platform:regulatory' is not a valid module or alias name
May 18 08:57:30 localhost kernel: [146854.141153] cfg80211: Regulatory domain changed to country: AU
May 18 08:57:30 localhost kernel: [146854.141161] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
May 18 08:57:30 localhost kernel: [146854.141168] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
May 18 08:57:30 localhost kernel: [146854.141174] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:30 localhost kernel: [146854.141180] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
May 18 08:57:30 localhost kernel: [146854.141186] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
May 18 08:57:31 localhost kernel: [146855.182407] wlan0: authenticate with 00:11:92:d7:34:23 (try 1)
May 18 08:57:31 localhost kernel: [146855.184481] wlan0: authenticated
May 18 08:57:31 localhost kernel: [146855.184580] wlan0: associate with 00:11:92:d7:34:23 (try 1)
May 18 08:57:32 localhost kernel: [146855.382283] wlan0: associate with 00:11:92:d7:34:23 (try 2)
May 18 08:57:32 localhost kernel: [146855.582267] wlan0: associate with 00:11:92:d7:34:23 (try 3)
May 18 08:57:32 localhost kernel: [146855.782286] wlan0: association with 00:11:92:d7:34:23 timed out
May 18 08:57:36 localhost kernel: [146859.602177] wlan0: no IPv6 routers present
May 18 08:57:40 localhost kernel: [146863.619800] wlan0: deauthenticating from 00:1f:9d:db:7b:53 by local choice (reason=3)lshw.log
arch_bf
description: Notebook
version: J00425SB
width: 32 bits
capabilities: smbios-2.4 dmi-2.4
configuration: boot=normal chassis=notebook family=VAIO sku=N/A uuid=6F411E50-F074-11DE-9C06-001DBABE7B3F
*-core
description: Motherboard
product: VAIO
vendor: Sony Corporation
physical id: 0
version: N/A
serial: N/A
*-firmware
description: BIOS
vendor: INSYDE
physical id: 0
version: R0084U4
date: 12/17/2009
size: 1MiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int9keyboard int10video acpi usb smartbattery biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Atom(TM) CPU Z540 @ 1.86GHz
vendor: Intel Corp.
physical id: 8
bus info: cpu@0
version: 6.12.2
serial: 0001-06C2-0000-0000-0000-0000
slot: N/A
size: 1866MHz
capacity: 1866MHz
width: 32 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 xtpr pdcm movbe lahf_lm tpr_shadow vnmi flexpriority
configuration: id=1
*-cache:0
description: L2 cache
physical id: 9
slot: L2 Cache
size: 512KiB
capacity: 512KiB
capabilities: synchronous internal write-back unified
*-cache:1
description: L1 cache
physical id: a
slot: L1 Cache
size: 56KiB
capacity: 56KiB
capabilities: synchronous internal write-back
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 32 bits
capabilities: logical
*-memory
description: System Memory
physical id: b
slot: System board or motherboard
size: 2GiB
*-bank
description: SODIMM DDR2
physical id: 0
slot: Onboard
size: 2GiB
width: 64 bits
*-pci
description: Host bridge
product: System Controller Hub (SCH Poulsbo)
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 06
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: System Controller Hub (SCH Poulsbo) Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=poulsbo latency=0
resources: irq:11 memory:94200000-9427ffff ioport:6070(size=8) memory:80000000-8fffffff memory:94280000-942bffff
*-multimedia
description: Audio device
product: System Controller Hub (SCH Poulsbo) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 06
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:19 memory:942c0000-942c3fff
*-pci:0
description: PCI bridge
product: System Controller Hub (SCH Poulsbo) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:5000(size=4096) memory:93100000-941fffff memory:90000000-90ffffff
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlan0
version: 01
serial: 2c:81:58:ea:70:66
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=2.6.38-ARCH firmware=N/A ip=10.0.1.11 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
resources: irq:16 memory:93100000-9310ffff
*-pci:1
description: PCI bridge
product: System Controller Hub (SCH Poulsbo) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 06
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:17 ioport:3000(size=8192) memory:92000000-930fffff memory:91000000-91ffffff
*-network DISABLED
description: Ethernet interface
product: 88E8057 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 00:1d:ba:be:7b:3f
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:40 memory:92000000-92003fff ioport:3000(size=256) memory:91000000-9101ffff
*-usb:0
description: USB Controller
product: System Controller Hub (SCH Poulsbo) USB UHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:6040(size=32)
*-usb:1
description: USB Controller
product: System Controller Hub (SCH Poulsbo) USB UHCI #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 06
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:22 ioport:6020(size=32)
*-usb:2
description: USB Controller
product: System Controller Hub (SCH Poulsbo) USB UHCI #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 06
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:6000(size=32)
*-usb:3
description: USB Controller
product: System Controller Hub (SCH Poulsbo) USB EHCI #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 06
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:20 memory:942c4000-942c43ff
*-isa
description: ISA bridge
product: System Controller Hub (SCH Poulsbo) LPC Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 06
width: 32 bits
clock: 33MHz
capabilities: isa
configuration: latency=0
*-ide
description: IDE interface
product: System Controller Hub (SCH Poulsbo) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi0
version: 06
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration: driver=pata_sch latency=0
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:6060(size=16)
*-disk
description: ATA Disk
product: SanDisk pSSD-P2
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: SSD
serial: AHZ102909091616
size: 59GiB (64GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=efe2cf95
*-volume:0
description: Linux filesystem partition
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /boot
version: 1.0
serial: ee295ea0-9fac-4377-a776-1084577d6416
size: 101MiB
capacity: 101MiB
capabilities: primary bootable extended_attributes ext2 initialized
configuration: filesystem=ext2 modified=2011-05-18 14:16:08 mount.fstype=ext2 mount.options=rw,relatime,errors=continue mounted=2011-05-13 12:53:21 state=mounted
*-volume:1
description: Linux swap volume
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
version: 1
serial: 3a4b5fe5-bc20-43a1-8cd0-e12c39e8b3c4
size: 258MiB
capacity: 258MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:2
description: EXT3 volume
vendor: Linux
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
logical name: /
version: 1.0
serial: fb8afae8-8c76-4222-bc9d-2f05e8148987
size: 7506MiB
capacity: 7506MiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2011-05-13 10:32:09 filesystem=ext3 modified=2011-05-15 20:17:54 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,commit=5,barrier=0,data=ordered mounted=2011-05-18 07:23:21 state=mounted
*-volume:3
description: EXT3 volume
vendor: Linux
physical id: 4
bus info: scsi@0:0.0.0,4
logical name: /dev/sda4
logical name: /home
version: 1.0
serial: 1c1d0982-5e3e-4aa9-be87-c80a57085387
size: 51GiB
capacity: 51GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2011-05-13 10:32:53 filesystem=ext3 modified=2011-05-18 07:23:21 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,commit=5,barrier=0,data=ordered mounted=2011-05-18 07:23:21 state=mountedI'm quite stuck with this problem and can't seem to find a solution to it.
Does anyone have any ideas on how to fix it?
Offline
For my University that uses an Aruba to manage their wireless I connect with wicd using the same script. It's basically the same as netcfg layout.
network={
ssid="$_ESSID"
proto=RSN
key_mgmt=WPA-EAP
pairwise=CCMP
eap=PEAP
identity="$_IDENTITY"
password="$_PASSWORD"
phaze2="auth=MSCHAPV2"
}Offline