You are not logged in.

#1 2011-08-16 22:24:38

fuzymonkey
Member
From: Austin, TX
Registered: 2009-07-28
Posts: 20

[SOLVED] Help with Epson Stylus NX625

I bought a new Epson printer. I had already installed the proper driver (http://aur.archlinux.org/packages.php?ID=42294) as well as cups. However, the cups online interface (localhost:631) is not recognizing it.

When I click "Find Printers" to see if mine is listed, I have this output in /var/logs/cups/error_log:

E [16/Aug/2011:17:24:06 -0500] [CGI] Unable to create avahi client: Resource temporarily unavailable
E [16/Aug/2011:17:24:06 -0500] [cups-deviced] PID 11933 (dnssd) stopped with status 1!

Does anyone else have a printer like this and/or could help me out? I'd greatly appreciate it.

Last edited by fuzymonkey (2011-08-18 05:09:35)


End of line

Offline

#2 2011-08-17 01:15:38

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,885

Re: [SOLVED] Help with Epson Stylus NX625

Is the Avahi daemon running ?
I assume you are using it in a wifi mode.
Does the printer connect to your router?
Do you know its address?
Does the printer host a web page for administration? Can you browse the printers site (by IP address)?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#3 2011-08-17 02:19:00

fuzymonkey
Member
From: Austin, TX
Registered: 2009-07-28
Posts: 20

Re: [SOLVED] Help with Epson Stylus NX625

No, I actually have the computer connected to the printer by USB at the moment. I was going to move on to wifi later.

You were right, avahi-daemon wasn't running. I added it to my /etc/rc.conf

My new error was

D [16/Aug/2011:20:49:09 -0500] [CGI] libusb couldn't open USB device /dev/bus/usb/001/002: Permission denied.
D [16/Aug/2011:20:49:09 -0500] [CGI] libusb requires write access to USB device nodes.
D [16/Aug/2011:20:49:09 -0500] [cups-deviced] PID 4216 (usb) exited with no errors.

Which was easily fixable from here: https://wiki.archlinux.org/index.php/CU … ermissions

This is now my output, which doesn't seem to have any errors.

D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2351 (lpd) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2353 (mdns) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2356 (cups-pdf) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2357 (scsi) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [CGI] Flushed attributes...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] Found device "socket"...
D [16/Aug/2011:21:11:25 -0500] [CGI] No address specified and no Address line in /etc/cups/snmp.conf...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2354 (parallel) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [CGI] Flushed attributes...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] Found device "ipp"...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2352 (ipp) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [CGI] Flushed attributes...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] Found device "smb"...
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2362 (snmp) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2360 (socket) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2350 (http) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2358 (smb) exited with no errors.
D [16/Aug/2011:21:11:25 -0500] [cups-deviced] PID 2359 (beh) exited with no errors.

End of line

Offline

#4 2011-08-18 05:08:11

fuzymonkey
Member
From: Austin, TX
Registered: 2009-07-28
Posts: 20

Re: [SOLVED] Help with Epson Stylus NX625

All right... humorously enough, I wasn't able to get the computer to work over usb, but it works fine using wifi. Granted, It's only printing junk at the moment, but I assume I solved my initial problem.


End of line

Offline

Board footer

Powered by FluxBB