You are not logged in.

#1 2011-11-10 15:32:39

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 663

[SOLVED]After yesterday's upgrade screen problem

So, yesterday i have upgraded to the newest kernel and udev. Now, the problem is that (i have XFCE) when laptop goes into "switch off screen" mode (in xfce4-power-manager) i cannot recall the screen back to normal (it remains black). I have to suspend it and wake it up in order the screen is visible/normal again (haven't tried to just kill X).

/var/log/messages:

Nov 10 14:42:27 localhost -- MARK --
Nov 10 15:21:01 localhost -- MARK --
Nov 10 15:41:01 localhost -- MARK --
Nov 10 16:12:08 localhost saso: ACPI group/action undefined: hotkey / ATK0100:00
Nov 10 16:12:08 localhost saso: ACPI group/action undefined: video/switchmode / VMOD
Nov 10 16:12:10 localhost saso: ACPI group/action undefined: hotkey / ATK0100:00
Nov 10 16:12:10 localhost saso: ACPI group/action undefined: video/switchmode / VMOD
Nov 10 16:12:16 localhost acpid: client 1616[0:100] has disconnected
Nov 10 16:12:23 localhost acpid: client connected from 1616[0:100]
Nov 10 16:12:23 localhost acpid: 1 client rule loaded
Nov 10 16:12:27 localhost kernel: [44163.481659] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.489933] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.499653] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:28 localhost dhcpcd[5940]: sending signal 1 to pid 5326
Nov 10 16:12:28 localhost dhcpcd[5940]: waiting for pid 5326 to exit
Nov 10 16:12:28 localhost dhcpcd[5326]: received SIGHUP, releasing
Nov 10 16:12:28 localhost dhcpcd[5326]: wlan0: releasing lease of 192.168.1.3
Nov 10 16:12:28 localhost dhcpcd[5326]: wlan0: removing interface
Nov 10 16:12:28 localhost kernel: [44164.828910] cfg80211: Calling CRDA to update world regulatory domain
Nov 10 16:12:28 localhost kernel: [44164.913810] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44164.994702] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.101603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.162838] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:41 localhost kernel: [44165.504492] PM: Syncing filesystems ... done.
Nov 10 16:12:41 localhost kernel: [44165.510675] Freezing user space processes ... (elapsed 0.01 seconds) done.
Nov 10 16:12:41 localhost kernel: [44165.522325] Freezing remaining freezable tasks ... (elapsed 1.09 seconds) done.
Nov 10 16:12:41 localhost kernel: [44166.615763] Suspending console(s) (use no_console_suspend to debug)
Nov 10 16:12:41 localhost kernel: [44166.616477] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov 10 16:12:41 localhost kernel: [44166.629860] sd 0:0:0:0: [sda] Stopping disk
Nov 10 16:12:41 localhost kernel: [44166.642540] ATL1E 0000:03:00.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44166.732640] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44167.018971] PM: suspend of devices complete after 402.827 msecs
Nov 10 16:12:41 localhost kernel: [44167.059129] PM: late suspend of devices complete after 40.150 msecs
Nov 10 16:12:41 localhost kernel: [44167.059309] ACPI: Preparing to enter system sleep state S3
Nov 10 16:12:41 localhost kernel: [44167.257307] PM: Saving platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.257797] Disabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.259218] CPU 1 is now offline
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] ACPI: Low-level resume complete
Nov 10 16:12:41 localhost kernel: [44167.259707] PM: Restoring platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] Enabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.266546] Booting Node 0 Processor 1 APIC 0x1
Nov 10 16:12:41 localhost kernel: [44167.259183] Initializing CPU#1
Nov 10 16:12:41 localhost kernel: [44167.259183] Calibrating delay loop (skipped) already calibrated this CPU
Nov 10 16:12:41 localhost kernel: [44167.277996] NMI watchdog enabled, takes one hw-pmu counter.
Nov 10 16:12:41 localhost kernel: [44167.278933] Switched to NOHz mode on CPU #1
Nov 10 16:12:41 localhost kernel: [44167.282318] CPU1 is up
Nov 10 16:12:42 localhost kernel: [44167.283293] ACPI: Waking up from system sleep state S3
Nov 10 16:12:42 localhost kernel: [44168.297514] PM: early resume of devices complete after 1.403 msecs
Nov 10 16:12:42 localhost kernel: [44168.297649] usb usb3: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297719] usb usb4: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297793] usb usb5: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299179] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 10 16:12:42 localhost kernel: [44168.299334] usb usb6: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299374] usb usb7: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299413] usb usb8: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.305605] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 10 16:12:42 localhost kernel: [44168.355074] Extended CMOS year: 2000
Nov 10 16:12:42 localhost kernel: [44168.362432] sd 0:0:0:0: [sda] Starting disk
Nov 10 16:12:42 localhost kernel: [44168.632301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 16:12:42 localhost kernel: [44168.655037] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.685480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.698272] ata2.00: configured for UDMA/100
Nov 10 16:12:42 localhost kernel: [44168.815660] usb 6-2: reset low speed USB device number 3 using uhci_hcd
Nov 10 16:12:42 localhost kernel: [44170.172346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 16:12:42 localhost kernel: [44170.174103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.174434] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178450] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178782] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.180642] ata1.00: configured for UDMA/133
Nov 10 16:12:42 localhost kernel: [44170.224518] PM: resume of devices complete after 1926.927 msecs
Nov 10 16:12:42 localhost kernel: [44170.224850] Restarting tasks ... done.
Nov 10 16:12:42 localhost kernel: [44170.238561] video LNXVIDEO:00: Restoring backlight state
Nov 10 16:12:45 localhost kernel: [44173.423488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:45 localhost laptop-mode: Laptop mode 
Nov 10 16:12:45 localhost laptop-mode: enabled, not active
Nov 10 16:12:46 localhost kernel: [44174.630668] CE: hpet increased min_delta_ns to 30169 nsec
Nov 10 16:12:46 localhost kernel: [44174.885331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.928328] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:46 localhost kernel: [44175.030767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:47 localhost kernel: [44175.496506] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.704900] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.708047] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost acpid: client 1616[0:100] has disconnected
Nov 10 16:12:47 localhost saso: ACPI group/action undefined: processor / LNXCPU:00
Nov 10 16:12:47 localhost acpid: client connected from 1616[0:100]
Nov 10 16:12:47 localhost acpid: 1 client rule loaded
Nov 10 16:12:47 localhost saso: ACPI group/action undefined: processor / LNXCPU:01
Nov 10 16:12:47 localhost laptop-mode: Laptop mode 
Nov 10 16:12:47 localhost laptop-mode: enabled, 
Nov 10 16:12:47 localhost laptop-mode: not active [unchanged]
Nov 10 16:12:47 localhost saso: ACPI action undefined: PNP0C0A:00
Nov 10 16:12:47 localhost laptop-mode: Laptop mode 
Nov 10 16:12:47 localhost laptop-mode: enabled, 
Nov 10 16:12:47 localhost laptop-mode: not active [unchanged]
Nov 10 16:12:49 localhost kernel: [44177.453758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov 10 16:12:49 localhost dhcpcd[6755]: version 5.2.12 starting
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: broadcasting for a lease
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: offered 192.168.1.3 from 192.168.1.1
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: acknowledged 192.168.1.3 from 192.168.1.1
Nov 10 16:12:50 localhost dhcpcd[6755]: wlan0: checking for 192.168.1.3
Nov 10 16:12:55 localhost dhcpcd[6755]: wlan0: leased 192.168.1.3 for 86400 seconds
Nov 10 16:12:55 localhost dhcpcd[6755]: forked to background, child pid 6778

/var/log/kernel.log:

Nov 10 13:29:37 localhost kernel: [34393.536524] oosplash.bin[28937]: segfault at 4d0 ip b779fa1b sp bf9ffbe0 error 4 in libX11.so.6.3.0[b776c000+132000]
Nov 10 16:12:27 localhost kernel: [44163.481659] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.489933] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:27 localhost kernel: [44163.499653] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:28 localhost kernel: [44164.769066] wlan0: deauthenticating from 00:1d:60:19:9c:51 by local choice (reason=3)
Nov 10 16:12:28 localhost kernel: [44164.828910] cfg80211: Calling CRDA to update world regulatory domain
Nov 10 16:12:28 localhost kernel: [44164.913810] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44164.994333] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:28 localhost kernel: [44164.994702] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.101603] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:28 localhost kernel: [44165.162190] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:28 localhost kernel: [44165.162838] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:41 localhost kernel: [44165.504492] PM: Syncing filesystems ... done.
Nov 10 16:12:41 localhost kernel: [44165.510538] PM: Preparing system for mem sleep
Nov 10 16:12:41 localhost kernel: [44165.510675] Freezing user space processes ... (elapsed 0.01 seconds) done.
Nov 10 16:12:41 localhost kernel: [44165.522325] Freezing remaining freezable tasks ... (elapsed 1.09 seconds) done.
Nov 10 16:12:41 localhost kernel: [44166.615714] PM: Entering mem sleep
Nov 10 16:12:41 localhost kernel: [44166.615763] Suspending console(s) (use no_console_suspend to debug)
Nov 10 16:12:41 localhost kernel: [44166.616477] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Nov 10 16:12:41 localhost kernel: [44166.629860] sd 0:0:0:0: [sda] Stopping disk
Nov 10 16:12:41 localhost kernel: [44166.642540] ATL1E 0000:03:00.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44166.732640] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
Nov 10 16:12:41 localhost kernel: [44167.018971] PM: suspend of devices complete after 402.827 msecs
Nov 10 16:12:41 localhost kernel: [44167.059129] PM: late suspend of devices complete after 40.150 msecs
Nov 10 16:12:41 localhost kernel: [44167.059309] ACPI: Preparing to enter system sleep state S3
Nov 10 16:12:41 localhost kernel: [44167.257307] PM: Saving platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.257797] Disabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.259218] CPU 1 is now offline
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] ACPI: Low-level resume complete
Nov 10 16:12:41 localhost kernel: [44167.259707] PM: Restoring platform NVS memory
Nov 10 16:12:41 localhost kernel: [44167.259707] CPU0: Thermal monitoring handled by SMI
Nov 10 16:12:41 localhost kernel: [44167.259707] Extended CMOS year: 2000
Nov 10 16:12:41 localhost kernel: [44167.259707] Enabling non-boot CPUs ...
Nov 10 16:12:41 localhost kernel: [44167.266546] Booting Node 0 Processor 1 APIC 0x1
Nov 10 16:12:41 localhost kernel: [44167.266548] smpboot cpu 1: start_ip = 93000
Nov 10 16:12:41 localhost kernel: [44167.259183] Initializing CPU#1
Nov 10 16:12:41 localhost kernel: [44167.259183] Calibrating delay loop (skipped) already calibrated this CPU
Nov 10 16:12:41 localhost kernel: [44167.259183] CPU1: Thermal monitoring handled by SMI
Nov 10 16:12:41 localhost kernel: [44167.277996] NMI watchdog enabled, takes one hw-pmu counter.
Nov 10 16:12:41 localhost kernel: [44167.278933] Switched to NOHz mode on CPU #1
Nov 10 16:12:41 localhost kernel: [44167.282318] CPU1 is up
Nov 10 16:12:42 localhost kernel: [44167.283293] ACPI: Waking up from system sleep state S3
Nov 10 16:12:42 localhost kernel: [44168.296199] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xdc01)
Nov 10 16:12:42 localhost kernel: [44168.296208] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Nov 10 16:12:42 localhost kernel: [44168.296456] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.296464] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Nov 10 16:12:42 localhost kernel: [44168.296500] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
Nov 10 16:12:42 localhost kernel: [44168.296517] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Nov 10 16:12:42 localhost kernel: [44168.296528] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296536] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100504)
Nov 10 16:12:42 localhost kernel: [44168.296592] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
Nov 10 16:12:42 localhost kernel: [44168.296609] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
Nov 10 16:12:42 localhost kernel: [44168.296620] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296628] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
Nov 10 16:12:42 localhost kernel: [44168.296684] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x20205)
Nov 10 16:12:42 localhost kernel: [44168.296698] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7df17de1)
Nov 10 16:12:42 localhost kernel: [44168.296712] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
Nov 10 16:12:42 localhost kernel: [44168.296720] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Nov 10 16:12:42 localhost kernel: [44168.297063] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Nov 10 16:12:42 localhost kernel: [44168.297137] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
Nov 10 16:12:42 localhost kernel: [44168.297165] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfeaf0004)
Nov 10 16:12:42 localhost kernel: [44168.297172] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.297182] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Nov 10 16:12:42 localhost kernel: [44168.297234] ATL1E 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
Nov 10 16:12:42 localhost kernel: [44168.297265] ATL1E 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Nov 10 16:12:42 localhost kernel: [44168.297274] ATL1E 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Nov 10 16:12:42 localhost kernel: [44168.297514] PM: early resume of devices complete after 1.403 msecs
Nov 10 16:12:42 localhost kernel: [44168.297614] i915 0000:00:02.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297619] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297649] usb usb3: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297692] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297719] usb usb4: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297766] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.297793] usb usb5: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.297807] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299179] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 10 16:12:42 localhost kernel: [44168.299187] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299238] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Nov 10 16:12:42 localhost kernel: [44168.299307] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299334] usb usb6: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299347] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299374] usb usb7: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299387] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299413] usb usb8: root hub lost power or was reset
Nov 10 16:12:42 localhost kernel: [44168.299428] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299473] pci 0000:00:1e.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.299489] ahci 0000:00:1f.2: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.305605] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Nov 10 16:12:42 localhost kernel: [44168.305613] ATL1E 0000:03:00.0: setting latency timer to 64
Nov 10 16:12:42 localhost kernel: [44168.305680] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:42 localhost kernel: [44168.355074] Extended CMOS year: 2000
Nov 10 16:12:42 localhost kernel: [44168.362432] sd 0:0:0:0: [sda] Starting disk
Nov 10 16:12:42 localhost kernel: [44168.632301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 16:12:42 localhost kernel: [44168.655032] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44168.655037] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.685475] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44168.685480] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44168.698272] ata2.00: configured for UDMA/100
Nov 10 16:12:42 localhost kernel: [44168.815660] usb 6-2: reset low speed USB device number 3 using uhci_hcd
Nov 10 16:12:42 localhost kernel: [44170.172346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 16:12:42 localhost kernel: [44170.174103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.174430] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44170.174434] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178450] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Nov 10 16:12:42 localhost kernel: [44170.178777] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Nov 10 16:12:42 localhost kernel: [44170.178782] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Nov 10 16:12:42 localhost kernel: [44170.180642] ata1.00: configured for UDMA/133
Nov 10 16:12:42 localhost kernel: [44170.224518] PM: resume of devices complete after 1926.927 msecs
Nov 10 16:12:42 localhost kernel: [44170.224848] PM: Finishing wakeup.
Nov 10 16:12:42 localhost kernel: [44170.224850] Restarting tasks ... done.
Nov 10 16:12:42 localhost kernel: [44170.238561] video LNXVIDEO:00: Restoring backlight state
Nov 10 16:12:45 localhost kernel: [44173.423488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.630668] CE: hpet increased min_delta_ns to 30169 nsec
Nov 10 16:12:46 localhost kernel: [44174.885331] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:46 localhost kernel: [44174.927923] ATL1E 0000:03:00.0: irq 46 for MSI/MSI-X
Nov 10 16:12:46 localhost kernel: [44174.928328] ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 10 16:12:46 localhost kernel: [44175.030767] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 10 16:12:47 localhost kernel: [44175.496506] EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.704900] EXT4-fs (sda2): re-mounted. Opts: commit=0
Nov 10 16:12:47 localhost kernel: [44175.708047] EXT4-fs (sda3): re-mounted. Opts: commit=0
Nov 10 16:12:49 localhost kernel: [44177.448823] wlan0: authenticate with 00:1d:60:19:9c:51 (try 1)
Nov 10 16:12:49 localhost kernel: [44177.450829] wlan0: authenticated
Nov 10 16:12:49 localhost kernel: [44177.450861] wlan0: associate with 00:1d:60:19:9c:51 (try 1)
Nov 10 16:12:49 localhost kernel: [44177.453381] wlan0: RX AssocResp from 00:1d:60:19:9c:51 (capab=0x411 status=0 aid=2)
Nov 10 16:12:49 localhost kernel: [44177.453385] wlan0: associated
Nov 10 16:12:49 localhost kernel: [44177.453758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov 10 16:12:59 localhost kernel: [44188.252291] wlan0: no IPv6 routers present

Upgraded packages:

[2011-11-09 12:04] upgraded linux (3.0.7-1 -> 3.1-4)
[2011-11-09 12:04] upgraded linux-headers (3.0.7-1 -> 3.1-4)
[2011-11-09 12:04] upgraded lirc-utils (1:0.9.0-6 -> 1:0.9.0-8)
[2011-11-09 12:04] upgraded mpfr (3.1.0.p1-1 -> 3.1.0.p3-1)
[2011-11-09 12:04] upgraded net-tools (1.60.20110819cvs-1 -> 1.60.20110819cvs-3)
[2011-11-09 12:04] upgraded pixman (0.22.2-1 -> 0.24.0-1)
[2011-11-09 12:04] upgraded udev (174-1 -> 175-1)
[2011-11-09 12:04] upgraded wine (1.3.32-1 -> 1.3.32-2)

/var/log/Xorg.0.log:
http://dl.dropbox.com/u/38176672/Xorg.0.log

/var/log/dmesg.log:
http://dl.dropbox.com/u/38176672/dmesg.log

Last edited by Shark (2011-12-01 12:49:45)


If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

#2 2011-11-10 20:46:50

dr.dynamics
Member
Registered: 2011-11-10
Posts: 25

Re: [SOLVED]After yesterday's upgrade screen problem

An upgrade to linux-3.1-4 is also unkind to my Intel GMA 4500MHD video card (in an HP 2730p).  Screen flicker / wierdness.  Tried an experiment, booted with a liveCD/USB of shiny new Fedora 16, also using kernel 3.1 -> same issue.

Offline

#3 2011-11-10 22:02:22

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 663

Re: [SOLVED]After yesterday's upgrade screen problem

This kernel version really is a mess - beside normal screen it removed my "Master Front" channel in alsa. I guess is a cross-distro problem.What udev version is fedora 16 using?

Canb you post some logs so that we can compare them.

P.S.

I have INTEL GMA 4500M graphic card

Last edited by Shark (2011-11-10 22:03:03)


If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

#4 2011-11-11 03:03:55

dr.dynamics
Member
Registered: 2011-11-10
Posts: 25

Re: [SOLVED]After yesterday's upgrade screen problem

Hey Shark,

I have since, with some difficulty, managed to downgrade my kernel back to 3.0.7-1, so unfortunately, I don't have any logs to share.  FWIW, I allowed the latest udev (175-1) to proceed, no issues, while F16 is using udev-173-3.fc16.x86_64.rpm.  I'm quite sure it's a kernel issue, with all the talk of KMS, and all the work that's been done on the intel driver.  I guess the kernel upgrade will have to wait.

Offline

#5 2011-11-12 20:02:07

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 663

Re: [SOLVED]After yesterday's upgrade screen problem

I have installed kernel from the testing repository and the problem still persist.


If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

#6 2011-11-13 01:31:08

yjcong
Member
Registered: 2009-07-06
Posts: 59

Re: [SOLVED]After yesterday's upgrade screen problem

hi,

I have the same problem(intel Corporation Mobile 915GM). And I found the following can solve the half of the problem
-----------
Section "Device"
    Identifier    "Device0"
    Driver        "vesa" # <---replacing intel by vesa
EndSection
--------------

But after "kill X", the screen of the framebuffer becomes quite horrible as showed in the pic.
fb.png

Offline

#7 2011-11-30 15:40:38

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 663

Re: [SOLVED]After yesterday's upgrade screen problem

The problem still persist with linux-3.1.2-1 and linux-3.1.3-1. Has anybody find the solution yet?


If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

#8 2011-11-30 18:17:47

Leonid.I
Member
From: Aethyr
Registered: 2009-03-22
Posts: 948

Re: [SOLVED]After yesterday's upgrade screen problem

Shark wrote:

This kernel version really is a mess

No, it's not. You have some problem with acpi/whatever else. HP 2530p here (same intel gma) -- no problem.

Are you having issues with backlight or resume from sleep?

Also, "yesterday's upgrade" really means nothing...


Arch Linux is more than just GNU/Linux -- it's an adventure

Offline

#9 2011-11-30 19:48:54

Shark
Member
From: /dev/zero
Registered: 2011-02-28
Posts: 663

Re: [SOLVED]After yesterday's upgrade screen problem

heheh, i just solved my problem. You gave me an idea that acpi may be wrong. So i have remembered that in menu.lst i have this line:acpi_osi=Linux acpi_backlight=vendor. I removed it and everything works fine now.


If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau

Registered Linux User: #559057

Offline

Board footer

Powered by FluxBB