You are not logged in.
Hi guys,
I cannot get plymouth to work. I've followed the wiki but still. The hardware is the Nvidia Ion GPU on an Intel Atom board. When I boot it doesn't look like the resolution is being changed to 1024x768, it looks like text mode. I am using plymouth-git 20120330-1.
uvesafb is built into the kernel. Kernel command line:
kernel /vmlinuz-linux-ck root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60dmesg:
root@ion ~ $ dmesg|grep -i vesa
[ 0.000000] Command line: root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60
[ 0.000000] Kernel command line: root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60
[ 3.100295] uvesafb: NVIDIA Corporation, MCP79 Board - mcp7a-pm, Chip Rev , OEM: NVIDIA, VBE v3.0
[ 3.158356] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 3.158364] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 3.159047] uvesafb: scrolling: redraw
[ 3.162370] uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc90003280000, using 14336k, total 14336k
[ 3.162379] fb0: VESA VGA frame buffer deviceFramebuffer modes:
root@ion ~ $ cat /sys/devices/platform/uvesafb.0/graphics/fb0/modes
U:1920x1080p-59
V:1280x1024p-85
V:1280x1024p-75
V:1280x1024p-60
V:1024x768p-85
V:1024x768p-75
V:1024x768p-70
V:1024x768p-60
V:1024x768i-43
V:800x600p-85
V:800x600p-75
V:800x600p-72
V:800x600p-60
V:800x600p-56
V:640x480p-85
V:640x480p-75
V:640x480p-72
V:640x480p-60
U:1920x1080p-59
U:1280x1024p-59
U:1024x768p-60
U:800x600p-59
U:640x480p-60mkinitcpio.conf:
HOOKS="base udev sata mdadm lvm2 v86d plymouth"Here's a strace when I try plymouth--show-splash (via SSH):
root@ion ~ $ strace plymouth --show-splash
execve("/bin/plymouth", ["plymouth", "--show-splash"], [/* 27 vars */]) = 0
brk(0) = 0x1cdd000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845c09000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=121099, ...}) = 0
mmap(NULL, 121099, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe845beb000
close(3) = 0
open("/lib/libply.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340L\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=93888, ...}) = 0
mmap(NULL, 2191040, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe8457d2000
mprotect(0x7fe8457e8000, 2097152, PROT_NONE) = 0
mmap(0x7fe8459e8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fe8459e8000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\25\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1983446, ...}) = 0
mmap(NULL, 3804112, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe845431000
mprotect(0x7fe8455c8000, 2097152, PROT_NONE) = 0
mmap(0x7fe8457c8000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x197000) = 0x7fe8457c8000
mmap(0x7fe8457ce000, 15312, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe8457ce000
close(3) = 0
open("/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@V\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1001864, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845bea000
mmap(NULL, 3096872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe84513c000
mprotect(0x7fe84522f000, 2097152, PROT_NONE) = 0
mmap(0x7fe84542f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf3000) = 0x7fe84542f000
close(3) = 0
open("/lib/librt.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\"\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31760, ...}) = 0
mmap(NULL, 2128880, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844f34000
mprotect(0x7fe844f3b000, 2093056, PROT_NONE) = 0
mmap(0x7fe84513a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7fe84513a000
close(3) = 0
open("/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14640, ...}) = 0
mmap(NULL, 2109688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844d30000
mprotect(0x7fe844d33000, 2093056, PROT_NONE) = 0
mmap(0x7fe844f32000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fe844f32000
close(3) = 0
open("/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@l\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=138216, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be9000
mmap(NULL, 2208640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844b14000
mprotect(0x7fe844b2b000, 2093056, PROT_NONE) = 0
mmap(0x7fe844d2a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fe844d2a000
mmap(0x7fe844d2c000, 13184, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe844d2c000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be8000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be7000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be6000
arch_prctl(ARCH_SET_FS, 0x7fe845be7700) = 0
mprotect(0x7fe8457c8000, 16384, PROT_READ) = 0
mprotect(0x7fe844d2a000, 4096, PROT_READ) = 0
mprotect(0x7fe844f32000, 4096, PROT_READ) = 0
mprotect(0x7fe84513a000, 4096, PROT_READ) = 0
mprotect(0x7fe84542f000, 4096, PROT_READ) = 0
mprotect(0x7fe845c0a000, 4096, PROT_READ) = 0
munmap(0x7fe845beb000, 121099) = 0
set_tid_address(0x7fe845be79d0) = 3905
set_robust_list(0x7fe845be79e0, 0x18) = 0
rt_sigaction(SIGRTMIN, {0x7fe844b1a7a0, [], SA_RESTORER|SA_SIGINFO, 0x7fe844b23140}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7fe844b1a820, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7fe844b23140}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [PIPE], SA_RESTORER|SA_RESTART, 0x7fe845465cb0}, {SIG_DFL, [], 0}, 8) = 0
brk(0) = 0x1cdd000
brk(0x1cfe000) = 0x1cfe000
epoll_create(64) = 3
pipe([4, 5]) = 0
fcntl(4, F_SETFD, FD_CLOEXEC|0x800) = 0
fcntl(5, F_SETFD, FD_CLOEXEC|0x800) = 0
epoll_ctl(3, EPOLL_CTL_ADD, 4, {EPOLLERR|EPOLLHUP, {u32=30265584, u64=30265584}}) = 0
epoll_ctl(3, EPOLL_CTL_MOD, 4, {EPOLLIN|EPOLLERR|EPOLLHUP, {u32=30265584, u64=30265584}}) = 0
open("/proc/cmdline", O_RDONLY) = 6
read(6, "root=/dev/sda3 rootflags=ro root"..., 512) = 143
close(6) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 6
fcntl(6, F_SETFD, FD_CLOEXEC|0x800) = 0
setsockopt(6, SOL_SOCKET, SO_PASSCRED, [1], 4) = 0
connect(6, {sa_family=AF_FILE, path=@"/org/freedesktop/plymouthd"}, 29) = -1 ECONNREFUSED (Connection refused)
close(6) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 6
fcntl(6, F_SETFD, FD_CLOEXEC|0x800) = 0
setsockopt(6, SOL_SOCKET, SO_PASSCRED, [1], 4) = 0
connect(6, {sa_family=AF_FILE, path=@"/ply-boot-protocol"}, 110) = -1 ECONNREFUSED (Connection refused)
close(6) = 0
epoll_ctl(3, EPOLL_CTL_DEL, 4, NULL) = 0
close(4) = 0
close(5) = 0
close(3) = 0
exit_group(1) = ?
root@ion ~ $Any help greatly appreciated ![]()
Offline
Does your graphics card support KMS? I assume it does since it's an Nvidia card. If it does, Plymouth will try to use that.
According to the KMS wiki entry:
At first, note that for any method you use, you should always disable:
Any "vga=" options in your bootloader as these will conflict with the native resolution enabled by KMS.
Any "video=" lines that enable a framebuffer that conflicts with the driver.
Any other framebuffer drivers (such as uvesafb).
Try removing "video=uvesafb:1024x768-60" from your kernel command line.
Offline
Does your graphics card support KMS? I assume it does since it's an Nvidia card. If it does, Plymouth will try to use that.
According to the KMS wiki entry:
At first, note that for any method you use, you should always disable:
Any "vga=" options in your bootloader as these will conflict with the native resolution enabled by KMS.
Any "video=" lines that enable a framebuffer that conflicts with the driver.
Any other framebuffer drivers (such as uvesafb).Try removing "video=uvesafb:1024x768-60" from your kernel command line.
It does, but I don't want to use it, I want to use the binary nvidia blob instead (the machine runs XBMC), therefore I'm trying to use uvesafb. Sorry, should've explained that in the post.
Offline