You are not logged in.

#1 2012-03-30 11:32:23

Fackamato
Member
Registered: 2006-03-31
Posts: 579

Cannot get plymouth to work

Hi guys,

I cannot get plymouth to work. I've followed the wiki but still. The hardware is the Nvidia Ion GPU on an Intel Atom board. When I boot it doesn't look like the resolution is being changed to 1024x768, it looks like text mode. I am using plymouth-git 20120330-1.

uvesafb is built into the kernel. Kernel command line:

kernel /vmlinuz-linux-ck root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60

dmesg:

root@ion ~ $ dmesg|grep -i vesa
[    0.000000] Command line: root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60
[    0.000000] Kernel command line: root=/dev/sda3 rootflags=ro rootfstype=ext4 ro quiet logo.nologo splash threadirqs init=/usr/sbin/e4rat-preload-lite video=uvesafb:1024x768-60
[    3.100295] uvesafb: NVIDIA Corporation, MCP79 Board - mcp7a-pm, Chip Rev   , OEM: NVIDIA, VBE v3.0
[    3.158356] uvesafb: VBIOS/hardware doesn't support DDC transfers
[    3.158364] uvesafb: no monitor limits have been set, default refresh rate will be used
[    3.159047] uvesafb: scrolling: redraw
[    3.162370] uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc90003280000, using 14336k, total 14336k
[    3.162379] fb0: VESA VGA frame buffer device

Framebuffer modes:

root@ion ~ $ cat  /sys/devices/platform/uvesafb.0/graphics/fb0/modes
U:1920x1080p-59
V:1280x1024p-85
V:1280x1024p-75
V:1280x1024p-60
V:1024x768p-85
V:1024x768p-75
V:1024x768p-70
V:1024x768p-60
V:1024x768i-43
V:800x600p-85
V:800x600p-75
V:800x600p-72
V:800x600p-60
V:800x600p-56
V:640x480p-85
V:640x480p-75
V:640x480p-72
V:640x480p-60
U:1920x1080p-59
U:1280x1024p-59
U:1024x768p-60
U:800x600p-59
U:640x480p-60

mkinitcpio.conf:

HOOKS="base udev sata mdadm lvm2 v86d plymouth"

Here's a strace when I try plymouth--show-splash (via SSH):

root@ion ~ $ strace plymouth --show-splash
execve("/bin/plymouth", ["plymouth", "--show-splash"], [/* 27 vars */]) = 0
brk(0)                                  = 0x1cdd000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845c09000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=121099, ...}) = 0
mmap(NULL, 121099, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe845beb000
close(3)                                = 0
open("/lib/libply.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340L\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=93888, ...}) = 0
mmap(NULL, 2191040, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe8457d2000
mprotect(0x7fe8457e8000, 2097152, PROT_NONE) = 0
mmap(0x7fe8459e8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fe8459e8000
close(3)                                = 0
open("/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\25\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1983446, ...}) = 0
mmap(NULL, 3804112, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe845431000
mprotect(0x7fe8455c8000, 2097152, PROT_NONE) = 0
mmap(0x7fe8457c8000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x197000) = 0x7fe8457c8000
mmap(0x7fe8457ce000, 15312, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe8457ce000
close(3)                                = 0
open("/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@V\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1001864, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845bea000
mmap(NULL, 3096872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe84513c000
mprotect(0x7fe84522f000, 2097152, PROT_NONE) = 0
mmap(0x7fe84542f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf3000) = 0x7fe84542f000
close(3)                                = 0
open("/lib/librt.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\"\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31760, ...}) = 0
mmap(NULL, 2128880, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844f34000
mprotect(0x7fe844f3b000, 2093056, PROT_NONE) = 0
mmap(0x7fe84513a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7fe84513a000
close(3)                                = 0
open("/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14640, ...}) = 0
mmap(NULL, 2109688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844d30000
mprotect(0x7fe844d33000, 2093056, PROT_NONE) = 0
mmap(0x7fe844f32000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fe844f32000
close(3)                                = 0
open("/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@l\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=138216, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be9000
mmap(NULL, 2208640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe844b14000
mprotect(0x7fe844b2b000, 2093056, PROT_NONE) = 0
mmap(0x7fe844d2a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fe844d2a000
mmap(0x7fe844d2c000, 13184, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe844d2c000
close(3)                                = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be8000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be7000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe845be6000
arch_prctl(ARCH_SET_FS, 0x7fe845be7700) = 0
mprotect(0x7fe8457c8000, 16384, PROT_READ) = 0
mprotect(0x7fe844d2a000, 4096, PROT_READ) = 0
mprotect(0x7fe844f32000, 4096, PROT_READ) = 0
mprotect(0x7fe84513a000, 4096, PROT_READ) = 0
mprotect(0x7fe84542f000, 4096, PROT_READ) = 0
mprotect(0x7fe845c0a000, 4096, PROT_READ) = 0
munmap(0x7fe845beb000, 121099)          = 0
set_tid_address(0x7fe845be79d0)         = 3905
set_robust_list(0x7fe845be79e0, 0x18)   = 0
rt_sigaction(SIGRTMIN, {0x7fe844b1a7a0, [], SA_RESTORER|SA_SIGINFO, 0x7fe844b23140}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7fe844b1a820, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7fe844b23140}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [PIPE], SA_RESTORER|SA_RESTART, 0x7fe845465cb0}, {SIG_DFL, [], 0}, 8) = 0
brk(0)                                  = 0x1cdd000
brk(0x1cfe000)                          = 0x1cfe000
epoll_create(64)                        = 3
pipe([4, 5])                            = 0
fcntl(4, F_SETFD, FD_CLOEXEC|0x800)     = 0
fcntl(5, F_SETFD, FD_CLOEXEC|0x800)     = 0
epoll_ctl(3, EPOLL_CTL_ADD, 4, {EPOLLERR|EPOLLHUP, {u32=30265584, u64=30265584}}) = 0
epoll_ctl(3, EPOLL_CTL_MOD, 4, {EPOLLIN|EPOLLERR|EPOLLHUP, {u32=30265584, u64=30265584}}) = 0
open("/proc/cmdline", O_RDONLY)         = 6
read(6, "root=/dev/sda3 rootflags=ro root"..., 512) = 143
close(6)                                = 0
socket(PF_FILE, SOCK_STREAM, 0)         = 6
fcntl(6, F_SETFD, FD_CLOEXEC|0x800)     = 0
setsockopt(6, SOL_SOCKET, SO_PASSCRED, [1], 4) = 0
connect(6, {sa_family=AF_FILE, path=@"/org/freedesktop/plymouthd"}, 29) = -1 ECONNREFUSED (Connection refused)
close(6)                                = 0
socket(PF_FILE, SOCK_STREAM, 0)         = 6
fcntl(6, F_SETFD, FD_CLOEXEC|0x800)     = 0
setsockopt(6, SOL_SOCKET, SO_PASSCRED, [1], 4) = 0
connect(6, {sa_family=AF_FILE, path=@"/ply-boot-protocol"}, 110) = -1 ECONNREFUSED (Connection refused)
close(6)                                = 0
epoll_ctl(3, EPOLL_CTL_DEL, 4, NULL)    = 0
close(4)                                = 0
close(5)                                = 0
close(3)                                = 0
exit_group(1)                           = ?
root@ion ~ $

Any help greatly appreciated smile

Offline

#2 2012-03-30 12:39:26

jakobcreutzfeldt
Member
Registered: 2011-05-12
Posts: 1,042

Re: Cannot get plymouth to work

Does your graphics card support KMS? I assume it does since it's an Nvidia card. If it does, Plymouth will try to use that.

According to the KMS wiki entry:

At first, note that for any method you use, you should always disable:

    Any "vga=" options in your bootloader as these will conflict with the native resolution enabled by KMS.
    Any "video=" lines that enable a framebuffer that conflicts with the driver.
    Any other framebuffer drivers (such as uvesafb).

Try removing "video=uvesafb:1024x768-60" from your kernel command line.

Offline

#3 2012-03-30 13:30:08

Fackamato
Member
Registered: 2006-03-31
Posts: 579

Re: Cannot get plymouth to work

jakobcreutzfeldt wrote:

Does your graphics card support KMS? I assume it does since it's an Nvidia card. If it does, Plymouth will try to use that.

According to the KMS wiki entry:

At first, note that for any method you use, you should always disable:

    Any "vga=" options in your bootloader as these will conflict with the native resolution enabled by KMS.
    Any "video=" lines that enable a framebuffer that conflicts with the driver.
    Any other framebuffer drivers (such as uvesafb).

Try removing "video=uvesafb:1024x768-60" from your kernel command line.

It does, but I don't want to use it, I want to use the binary nvidia blob instead (the machine runs XBMC), therefore I'm trying to use uvesafb. Sorry, should've explained that in the post.

Offline

Board footer

Powered by FluxBB