[SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

ArchiMark · 2012-04-16 16:12:26

Gusar wrote:

sealclubber wrote:
Wait a sec. Your chipset is an embedded Intel System Controller Hub US15W. Why do you have the drivers for a GMA chipset?
US15W contains Poulsbo aka GMA500 graphics. Which is a big pain in the behind. The in-kernel gma500 driver is modesetting-only, no userspace driver for it, so you either use xf86-video-fbdev or xf86-video-modesetting with it. Of course there's no acceleration with those.
Then there's some closed drivers. But those only work with specific old versions of the kernel and X. Good luck getting that working. And I really mean that. Search AUR for poulsbo, there's some stuff there.

Yes, I've read plenty of concerns about the Poulsbo....unfortunately, that's what the U820 uses....

I assume that now that I'm able to open up some X windows and terminal, I'll be able to move forward with finishing setting up my U820 and be able to use AUR....

chamber · 2012-04-16 16:14:33

If that's working for you then carry on.

ArchiMark · 2012-04-16 16:19:19

chamber wrote:

If that's working for you then carry on.

Thank you.....

So, next gotta decide what desktop to use.....thinking maybe LXDE or something else light?.....

chamber · 2012-04-16 16:22:14

I use Subtle, it's super light. Lxde is great too through.

ArchiMark · 2012-04-16 17:36:12

chamber wrote:

I use Subtle, it's super light. Lxde is great too through.

Thanks for your input......not familiar with Subtle, but will check it out.....

ArchiMark · 2012-04-18 20:35:10

chamber wrote:

If that's working for you then carry on.

Well, it seems that I spoke too soon......

Seemed like everything was working well including LXDE....

I rebooted today and now I noticed a warning message as it was booting up...

Haven't figured out how to fix....related to X again...

Got message:

warning: module psb not found

So, now I can't start X and LXDE.....

Assume that either something about configuration settings did not persist after rebooting or something else changed....

Any suggestions?

Thanks!

Pres · 2012-04-18 20:47:34

ArchiMark wrote:

Got message:
warning: module psb not found
So, now I can't start X and LXDE.....
Assume that either something about configuration settings did not persist after rebooting or something else changed....
Any suggestions?
Thanks!

Did this happen after an update?

ArchiMark · 2012-04-18 21:40:19

Pres wrote:

ArchiMark wrote:
Got message:
warning: module psb not found
So, now I can't start X and LXDE.....
Assume that either something about configuration settings did not persist after rebooting or something else changed....
Any suggestions?
Thanks!
Did this happen after an update?

I did install a few programs such as conky, notecase pro, etc....and notecase pro needs some libs from openssl....so, installed that...

UPDATE....just remembered that I also installed 'packer' too....

Last edited by ArchiMark (2012-04-19 03:12:38)

ludwis · 2012-04-19 12:04:41

Please provide us the contents of /var/log/Xorg.0.log

ArchiMark · 2012-04-19 13:29:26

ludwis wrote:

Please provide us the contents of /var/log/Xorg.0.log

Just noticed another message while booting....

Something like:

yenta_cardbus.... No cardbus resourse! ...
loremap error.... requested 0x....., got 0..... (something like this....goes by so fast...)

Meanwhile, here's some content of /var/log/Xorg.0.log

Parse error on line 1 of section InputClass in file /etc/X11/xorg.conf
Driver is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
No screens found

Strange as I don't have a xorg.conf file!......can't find it in the X11 directory.....only have xinit and xorg.conf.d directories in that directory...

Just checked my xinitrc file in xinit and noticed a line with 'twm &' in it, changed it to 'lxde'....rebooted and then tried starting LXDE and voila! it opened this time.....rebooted and tried it again and it works..

So, while this appears to be good news, I don't understand why I have all the other error messages now....any suggestions as to how to fix?

Thanks!

fartbox · 2012-04-21 01:38:08

The psb_gfx module is renamed as of kernel 3.3-rc1. You should rename any instance of it to gma500_gfx.

(And please, consider assisting with updating the poulsbo wiki-page, as it is getting dusty real fast)

ArchiMark · 2012-04-21 03:44:12

fartbox wrote:

The psb_gfx module is renamed as of kernel 3.3-rc1. You should rename any instance of it to gma500_gfx.

Thanks for the suggestion......

I checked my 'rc.conf' file and there was a line in the HARDWARE>MODULES section that had a reference to 'psb'. So, changed it to 'gma500_gfx'. Rebooted and voila! was able to open LXDE again....

(And please, consider assisting with updating the poulsbo wiki-page, as it is getting dusty real fast)

OK, wll see about that.....

Meanwhile, two more things and then I think my setup will be in very good shape for me to use daily...

A. Networking - Ethernet

I found that I had to enter in all the IP address info in 'rc.conf' in order to get ethernet connection working when I'm connected at my workplace network. Then it connected OK...

When I come home it doesn't connect I assume because eth0 is populated with the workplace IP address info.

So, instead of deleting that info and then connecting at home with dhcp, I assume that I should be setting up another ethernet connection in rc.conf, such as eth1, correct?

Any examples or suggestions (or other programs as to best way to do this?

B. USB Flash Drives

I tried connecting my USB Flash Drive but I get error message in a window that pops up onscreen that says 'Not Authorized'. My drive is not write protected.

Is this something that Arch it doing for security reasons or ?

How can I get my flash drive working?

Thanks!

skunktrader · 2012-04-21 06:59:40

ArchiMark wrote:

B. USB Flash Drives
I tried connecting my USB Flash Drive but I get error message in a window that pops up onscreen that says 'Not Authorized'. My drive is not write protected.
Is this something that Arch it doing for security reasons or ?
How can I get my flash drive working?

According to the wiki, you should start LXDE with

exec ck-launch-session startlxde

in your ~/.xinitrc

skunktrader · 2012-04-21 07:24:46

ArchiMark wrote:

A. Networking - Ethernet
I found that I had to enter in all the IP address info in 'rc.conf' in order to get ethernet connection working when I'm connected at my workplace network. Then it connected OK...
When I come home it doesn't connect I assume because eth0 is populated with the workplace IP address info.
So, instead of deleting that info and then connecting at home with dhcp, I assume that I should be setting up another ethernet connection in rc.conf, such as eth1, correct?

No, eth1 refers to the second network card in your machine.
You should use netcfg instead of network if you need multiple different configrations to connect. net-profiles will be useful for you.

Last edited by skunktrader (2012-04-21 07:28:49)

ArchiMark · 2012-04-21 14:25:36

skunktrader wrote:

ArchiMark wrote:
B. USB Flash Drives
I tried connecting my USB Flash Drive but I get error message in a window that pops up onscreen that says 'Not Authorized'. My drive is not write protected.
Is this something that Arch it doing for security reasons or ?
How can I get my flash drive working?
According to the wiki, you should start LXDE with
exec ck-launch-session startlxde
in your ~/.xinitrc

Remember reading that....thanks for the reference...

However, I didn't have a .xinitrc file. But I just created one now and put that line in there...

Rebooted but I'm back at console login.

So, now that I have that file, what do I type at prompt to start lxde. read wiki, but it's not clear to me what to type now?

Thanks.

ArchiMark · 2012-04-21 14:26:23

skunktrader wrote:

ArchiMark wrote:
A. Networking - Ethernet
I found that I had to enter in all the IP address info in 'rc.conf' in order to get ethernet connection working when I'm connected at my workplace network. Then it connected OK...
When I come home it doesn't connect I assume because eth0 is populated with the workplace IP address info.
So, instead of deleting that info and then connecting at home with dhcp, I assume that I should be setting up another ethernet connection in rc.conf, such as eth1, correct?
No, eth1 refers to the second network card in your machine.
You should use netcfg instead of network if you need multiple different configrations to connect. net-profiles will be useful for you.

Thanks for explaining and the references...will check that out....

chamber · 2012-04-21 14:35:22

ArchiMark wrote:

skunktrader wrote:
ArchiMark wrote:
B. USB Flash Drives
I tried connecting my USB Flash Drive but I get error message in a window that pops up onscreen that says 'Not Authorized'. My drive is not write protected.
Is this something that Arch it doing for security reasons or ?
How can I get my flash drive working?
According to the wiki, you should start LXDE with
exec ck-launch-session startlxde
in your ~/.xinitrc
Remember reading that....thanks for the reference...
However, I didn't have a .xinitrc file. But I just created one now and put that line in there...
Rebooted but I'm back at console login.
So, now that I have that file, what do I type at prompt to start lxde. read wiki, but it's not clear to me what to type now?
Thanks.

You can use something like slim or lxdm to log in to lxde after the computer boots.

Slim uses the .xinitrc to start x, not sure about lxdm as I have not used it.

Last edited by chamber (2012-04-21 14:36:17)

ArchiMark · 2012-04-21 14:49:52

chamber wrote:

ArchiMark wrote:
skunktrader wrote:
According to the wiki, you should start LXDE with
exec ck-launch-session startlxde
in your ~/.xinitrc
Remember reading that....thanks for the reference...
However, I didn't have a .xinitrc file. But I just created one now and put that line in there...
Rebooted but I'm back at console login.
So, now that I have that file, what do I type at prompt to start lxde. read wiki, but it's not clear to me what to type now?
Thanks.
You can use something like slim or lxdm to log in to lxde after the computer boots.
Slim uses the .xinitrc to start x, not sure about lxdm as I have not used it.

OK, thnk I get it now....will try slim and see what happens....

Thanks!

skunktrader · 2012-04-22 00:17:39

ArchiMark wrote:

However, I didn't have a .xinitrc file. But I just created one now and put that line in there...
Rebooted but I'm back at console login.
So, now that I have that file, what do I type at prompt to start lxde. read wiki, but it's not clear to me what to type now?

startx

ArchiMark · 2012-04-22 01:52:22

skunktrader wrote:

ArchiMark wrote:
However, I didn't have a .xinitrc file. But I just created one now and put that line in there...
Rebooted but I'm back at console login.
So, now that I have that file, what do I type at prompt to start lxde. read wiki, but it's not clear to me what to type now?
startx

Thanks, but when I try 'startx', I get:

xauth: file /home/marks/.Xauthority does not exist
(==) Log file: "/var/log/Xorg.0.log"
(==) Using config directory: "/etc/X11/xorg.conf.d"
xinit: connection to server lost
waiting for X server to shut down Server terminated successfully (0). Closing log file.

Pres · 2012-04-22 03:40:24

Post your full Xorg.0.log.

ArchiMark · 2012-04-22 04:39:57

Pres wrote:

Post your full Xorg.0.log.

Here's the full log file:

[ 50559.022]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 50559.033] X Protocol Version 11, Revision 0
[ 50559.037] Build Operating System: Linux 3.3.1-1-ARCH i686
[ 50559.040] Current Operating System: Linux MarksAirport 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686
[ 50559.044] Kernel command line: root=/dev/sda3 ro
[ 50559.048] Build Date: 14 April 2012 07:32:51AM
[ 50559.052]
[ 50559.055] Current version of pixman: 0.24.4
[ 50559.059] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 50559.066] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 50559.079] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 21 21:23:09 2012
[ 50559.083] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 50559.087] (==) No Layout section. Using the first Screen section.
[ 50559.087] (==) No screen section available. Using defaults.
[ 50559.087] (**) |-->Screen "Default Screen Section" (0)
[ 50559.087] (**) | |-->Monitor "<default monitor>"
[ 50559.088] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 50559.088] (==) Automatically adding devices
[ 50559.088] (==) Automatically enabling devices
[ 50559.088] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 50559.088] Entry deleted from font path.
[ 50559.088] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 50559.088] Entry deleted from font path.
[ 50559.088] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 50559.088] Entry deleted from font path.
[ 50559.088] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 50559.088] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 50559.088] Entry deleted from font path.
[ 50559.088] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 50559.088] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 50559.088] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 50559.088] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 50559.088] (II) Loader magic: 0x82215a0
[ 50559.088] (II) Module ABI versions:
[ 50559.088] X.Org ANSI C Emulation: 0.4
[ 50559.088] X.Org Video Driver: 12.0
[ 50559.088] X.Org XInput driver : 16.0
[ 50559.088] X.Org Server Extension : 6.0
[ 50559.090] (--) PCI:*(0:0:2:0) 8086:8108:10cf:14bc rev 6, Mem @ 0xfd600000/524288, 0xf0000000/134217728, 0xfd680000/131072, I/O @ 0x00001800/8
[ 50559.090] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 50559.090] (II) LoadModule: "extmod"
[ 50559.091] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 50559.091] (II) Module extmod: vendor="X.Org Foundation"
[ 50559.091] compiled for 1.12.1, module version = 1.0.0
[ 50559.091] Module class: X.Org Server Extension
[ 50559.091] ABI class: X.Org Server Extension, version 6.0
[ 50559.091] (II) Loading extension MIT-SCREEN-SAVER
[ 50559.091] (II) Loading extension XFree86-VidModeExtension
[ 50559.092] (II) Loading extension XFree86-DGA
[ 50559.092] (II) Loading extension DPMS
[ 50559.092] (II) Loading extension XVideo
[ 50559.092] (II) Loading extension XVideo-MotionCompensation
[ 50559.092] (II) Loading extension X-Resource
[ 50559.092] (II) LoadModule: "dbe"
[ 50559.092] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 50559.092] (II) Module dbe: vendor="X.Org Foundation"
[ 50559.092] compiled for 1.12.1, module version = 1.0.0
[ 50559.092] Module class: X.Org Server Extension
[ 50559.092] ABI class: X.Org Server Extension, version 6.0
[ 50559.092] (II) Loading extension DOUBLE-BUFFER
[ 50559.092] (II) LoadModule: "glx"
[ 50559.093] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50559.093] (II) Module glx: vendor="X.Org Foundation"
[ 50559.093] compiled for 1.12.1, module version = 1.0.0
[ 50559.093] ABI class: X.Org Server Extension, version 6.0
[ 50559.093] (==) AIGLX enabled
[ 50559.093] (II) Loading extension GLX
[ 50559.093] (II) LoadModule: "record"
[ 50559.093] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 50559.094] (II) Module record: vendor="X.Org Foundation"
[ 50559.094] compiled for 1.12.1, module version = 1.13.0
[ 50559.094] Module class: X.Org Server Extension
[ 50559.094] ABI class: X.Org Server Extension, version 6.0
[ 50559.094] (II) Loading extension RECORD
[ 50559.094] (II) LoadModule: "dri"
[ 50559.094] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 50559.095] (II) Module dri: vendor="X.Org Foundation"
[ 50559.095] compiled for 1.12.1, module version = 1.0.0
[ 50559.095] ABI class: X.Org Server Extension, version 6.0
[ 50559.095] (II) Loading extension XFree86-DRI
[ 50559.095] (II) LoadModule: "dri2"
[ 50559.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 50559.095] (II) Module dri2: vendor="X.Org Foundation"
[ 50559.095] compiled for 1.12.1, module version = 1.2.0
[ 50559.095] ABI class: X.Org Server Extension, version 6.0
[ 50559.095] (II) Loading extension DRI2
[ 50559.095] (==) Matched vesa as autoconfigured driver 0
[ 50559.095] (==) Matched fbdev as autoconfigured driver 1
[ 50559.095] (==) Assigned the driver to the xf86ConfigLayout
[ 50559.096] (II) LoadModule: "vesa"
[ 50559.096] (WW) Warning, couldn't open module vesa
[ 50559.096] (II) UnloadModule: "vesa"
[ 50559.096] (II) Unloading vesa
[ 50559.096] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 50559.096] (II) LoadModule: "fbdev"
[ 50559.097] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 50559.097] (II) Module fbdev: vendor="X.Org Foundation"
[ 50559.097] compiled for 1.11.99.903, module version = 0.4.2
[ 50559.097] ABI class: X.Org Video Driver, version 12.0
[ 50559.097] (II) FBDEV: driver for framebuffer: fbdev
[ 50559.097] (--) using VT number 7
[ 50559.111] (II) Loading sub module "fbdevhw"
[ 50559.111] (II) LoadModule: "fbdevhw"
[ 50559.112] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 50559.112] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 50559.112] compiled for 1.12.1, module version = 0.0.2
[ 50559.112] ABI class: X.Org Video Driver, version 12.0
[ 50559.112] (**) FBDEV(0): claimed PCI slot 0@0:2:0
[ 50559.112] (II) FBDEV(0): using default device
[ 50559.113] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 50559.113] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 50559.113] (==) FBDEV(0): RGB weight 888
[ 50559.113] (==) FBDEV(0): Default visual is TrueColor
[ 50559.113] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 50559.113] (II) FBDEV(0): hardware: psbfb (video memory: 6400kB)
[ 50559.113] (II) FBDEV(0): checking modes against framebuffer device...
[ 50559.113] (II) FBDEV(0): checking modes against monitor...
[ 50559.113] (--) FBDEV(0): Virtual size is 1280x800 (pitch 1280)
[ 50559.113] (**) FBDEV(0): Built-in mode "current"
[ 50559.113] (==) FBDEV(0): DPI set to (96, 96)
[ 50559.113] (II) Loading sub module "fb"
[ 50559.113] (II) LoadModule: "fb"
[ 50559.114] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 50559.115] (II) Module fb: vendor="X.Org Foundation"
[ 50559.116] compiled for 1.12.1, module version = 1.0.0
[ 50559.116] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50559.116] (**) FBDEV(0): using shadow framebuffer
[ 50559.116] (II) Loading sub module "shadow"
[ 50559.116] (II) LoadModule: "shadow"
[ 50559.116] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 50559.117] (II) Module shadow: vendor="X.Org Foundation"
[ 50559.117] compiled for 1.12.1, module version = 1.1.0
[ 50559.117] ABI class: X.Org ANSI C Emulation, version 0.4
[ 50559.117] (==) Depth 24 pixmap format is 32 bpp
[ 50559.459] (==) FBDEV(0): Backing store disabled
[ 50559.460] (==) FBDEV(0): DPMS enabled
[ 50559.460] (==) RandR enabled
[ 50559.460] (II) Initializing built-in extension Generic Event Extension
[ 50559.460] (II) Initializing built-in extension SHAPE
[ 50559.460] (II) Initializing built-in extension MIT-SHM
[ 50559.460] (II) Initializing built-in extension XInputExtension
[ 50559.460] (II) Initializing built-in extension XTEST
[ 50559.460] (II) Initializing built-in extension BIG-REQUESTS
[ 50559.460] (II) Initializing built-in extension SYNC
[ 50559.460] (II) Initializing built-in extension XKEYBOARD
[ 50559.460] (II) Initializing built-in extension XC-MISC
[ 50559.460] (II) Initializing built-in extension SECURITY
[ 50559.460] (II) Initializing built-in extension XINERAMA
[ 50559.461] (II) Initializing built-in extension XFIXES
[ 50559.461] (II) Initializing built-in extension RENDER
[ 50559.461] (II) Initializing built-in extension RANDR
[ 50559.461] (II) Initializing built-in extension COMPOSITE
[ 50559.461] (II) Initializing built-in extension DAMAGE
[ 50559.485] (II) AIGLX: Screen 0 is not DRI2 capable
[ 50559.485] (II) AIGLX: Screen 0 is not DRI capable
[ 50559.498] (II) AIGLX: Loaded and initialized swrast
[ 50559.498] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 50559.626] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event2)
[ 50559.626] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 50559.626] (II) LoadModule: "evdev"
[ 50559.627] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 50559.627] (II) Module evdev: vendor="X.Org Foundation"
[ 50559.627] compiled for 1.12.0, module version = 2.7.0
[ 50559.627] Module class: X.Org XInput Driver
[ 50559.627] ABI class: X.Org XInput driver, version 16.0
[ 50559.627] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 50559.627] (**) Fujitsu FUJ02E3: always reports core events
[ 50559.627] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event2"
[ 50559.628] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 50559.628] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 50559.628] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 50559.628] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input2/event2"
[ 50559.628] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 6)
[ 50559.628] (**) Option "xkb_rules" "evdev"
[ 50559.628] (**) Option "xkb_model" "evdev"
[ 50559.628] (**) Option "xkb_layout" "us, bg"
[ 50559.628] (**) Option "xkb_variant" ", phonetic"
[ 50559.628] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.713] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 50559.713] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 50559.713] (II) Using input driver 'evdev' for 'Video Bus'
[ 50559.713] (**) Video Bus: always reports core events
[ 50559.713] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 50559.713] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 50559.713] (--) evdev: Video Bus: Found keys
[ 50559.713] (II) evdev: Video Bus: Configuring as keyboard
[ 50559.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 50559.714] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 50559.714] (**) Option "xkb_rules" "evdev"
[ 50559.714] (**) Option "xkb_model" "evdev"
[ 50559.714] (**) Option "xkb_layout" "us, bg"
[ 50559.714] (**) Option "xkb_variant" ", phonetic"
[ 50559.714] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.716] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event1)
[ 50559.716] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 50559.716] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 50559.716] (**) Fujitsu FUJ02B1: always reports core events
[ 50559.716] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event1"
[ 50559.716] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 50559.716] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 50559.716] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 50559.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/FUJ02B1:00/input/input1/event1"
[ 50559.716] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 8)
[ 50559.716] (**) Option "xkb_rules" "evdev"
[ 50559.716] (**) Option "xkb_model" "evdev"
[ 50559.716] (**) Option "xkb_layout" "us, bg"
[ 50559.716] (**) Option "xkb_variant" ", phonetic"
[ 50559.716] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.718] (II) config/udev: Adding input device Fujitsu FUJ02BF (/dev/input/event5)
[ 50559.718] (**) Fujitsu FUJ02BF: Applying InputClass "evdev keyboard catchall"
[ 50559.718] (II) Using input driver 'evdev' for 'Fujitsu FUJ02BF'
[ 50559.718] (**) Fujitsu FUJ02BF: always reports core events
[ 50559.718] (**) evdev: Fujitsu FUJ02BF: Device: "/dev/input/event5"
[ 50559.719] (--) evdev: Fujitsu FUJ02BF: Vendor 0x1734 Product 0x1
[ 50559.719] (--) evdev: Fujitsu FUJ02BF: Found keys
[ 50559.719] (II) evdev: Fujitsu FUJ02BF: Configuring as keyboard
[ 50559.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/FUJ02BF:00/input/input5/event5"
[ 50559.719] (II) XINPUT: Adding extended input device "Fujitsu FUJ02BF" (type: KEYBOARD, id 9)
[ 50559.719] (**) Option "xkb_rules" "evdev"
[ 50559.719] (**) Option "xkb_model" "evdev"
[ 50559.719] (**) Option "xkb_layout" "us, bg"
[ 50559.719] (**) Option "xkb_variant" ", phonetic"
[ 50559.719] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.721] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 50559.721] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 50559.721] (II) Using input driver 'evdev' for 'Power Button'
[ 50559.721] (**) Power Button: always reports core events
[ 50559.721] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 50559.721] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 50559.721] (--) evdev: Power Button: Found keys
[ 50559.721] (II) evdev: Power Button: Configuring as keyboard
[ 50559.721] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 50559.721] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 50559.721] (**) Option "xkb_rules" "evdev"
[ 50559.721] (**) Option "xkb_model" "evdev"
[ 50559.721] (**) Option "xkb_layout" "us, bg"
[ 50559.722] (**) Option "xkb_variant" ", phonetic"
[ 50559.722] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.723] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 50559.723] (II) No input driver specified, ignoring this device.
[ 50559.723] (II) This device may have been added with another device file.
[ 50559.724] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 50559.724] (II) No input driver specified, ignoring this device.
[ 50559.724] (II) This device may have been added with another device file.
[ 50559.725] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event12)
[ 50559.725] (II) No input driver specified, ignoring this device.
[ 50559.725] (II) This device may have been added with another device file.
[ 50559.726] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event13)
[ 50559.726] (II) No input driver specified, ignoring this device.
[ 50559.726] (II) This device may have been added with another device file.
[ 50559.727] (II) config/udev: Adding input device Fujitsu Component USB Touch Panel (/dev/input/event9)
[ 50559.727] (**) Fujitsu Component USB Touch Panel: Applying InputClass "evdev tablet catchall"
[ 50559.727] (II) Using input driver 'evdev' for 'Fujitsu Component USB Touch Panel'
[ 50559.727] (**) Fujitsu Component USB Touch Panel: always reports core events
[ 50559.727] (**) evdev: Fujitsu Component USB Touch Panel: Device: "/dev/input/event9"
[ 50559.727] (--) evdev: Fujitsu Component USB Touch Panel: Vendor 0x430 Product 0x530
[ 50559.727] (--) evdev: Fujitsu Component USB Touch Panel: Found 1 mouse buttons
[ 50559.727] (--) evdev: Fujitsu Component USB Touch Panel: Found absolute axes
[ 50559.727] (--) evdev: Fujitsu Component USB Touch Panel: Found x and y absolute axes
[ 50559.727] (--) evdev: Fujitsu Component USB Touch Panel: Found absolute tablet.
[ 50559.727] (II) evdev: Fujitsu Component USB Touch Panel: Configuring as tablet
[ 50559.727] (**) evdev: Fujitsu Component USB Touch Panel: YAxisMapping: buttons 4 and 5
[ 50559.728] (**) evdev: Fujitsu Component USB Touch Panel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 50559.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input9/event9"
[ 50559.728] (II) XINPUT: Adding extended input device "Fujitsu Component USB Touch Panel" (type: TABLET, id 11)
[ 50559.728] (II) evdev: Fujitsu Component USB Touch Panel: initialized for absolute axes.
[ 50559.728] (**) Fujitsu Component USB Touch Panel: (accel) keeping acceleration scheme 1
[ 50559.728] (**) Fujitsu Component USB Touch Panel: (accel) acceleration profile 0
[ 50559.729] (**) Fujitsu Component USB Touch Panel: (accel) acceleration factor: 2.000
[ 50559.729] (**) Fujitsu Component USB Touch Panel: (accel) acceleration threshold: 4
[ 50559.729] (II) config/udev: Adding input device Fujitsu Component USB Touch Panel (/dev/input/mouse0)
[ 50559.729] (II) No input driver specified, ignoring this device.
[ 50559.730] (II) This device may have been added with another device file.
[ 50559.731] (II) config/udev: Adding input device USB Camera (/dev/input/event8)
[ 50559.731] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 50559.731] (II) Using input driver 'evdev' for 'USB Camera'
[ 50559.731] (**) USB Camera: always reports core events
[ 50559.731] (**) evdev: USB Camera: Device: "/dev/input/event8"
[ 50559.731] (--) evdev: USB Camera: Vendor 0x3ee Product 0x7320
[ 50559.731] (--) evdev: USB Camera: Found keys
[ 50559.731] (II) evdev: USB Camera: Configuring as keyboard
[ 50559.731] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input8/event8"
[ 50559.731] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 12)
[ 50559.731] (**) Option "xkb_rules" "evdev"
[ 50559.731] (**) Option "xkb_model" "evdev"
[ 50559.731] (**) Option "xkb_layout" "us, bg"
[ 50559.731] (**) Option "xkb_variant" ", phonetic"
[ 50559.732] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.733] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 50559.733] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 50559.733] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 50559.733] (**) AT Translated Set 2 keyboard: always reports core events
[ 50559.733] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 50559.734] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 50559.734] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 50559.734] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 50559.734] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 50559.734] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 50559.734] (**) Option "xkb_rules" "evdev"
[ 50559.734] (**) Option "xkb_model" "evdev"
[ 50559.734] (**) Option "xkb_layout" "us, bg"
[ 50559.734] (**) Option "xkb_variant" ", phonetic"
[ 50559.734] (**) Option "xkb_options" "grp:alt_shift_toggle, grp_led:scroll, terminate:ctrl_alt_bksp"
[ 50559.736] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10)
[ 50559.736] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 50559.736] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 50559.736] (**) PS/2 Generic Mouse: always reports core events
[ 50559.736] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event10"
[ 50559.736] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 50559.736] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 50559.736] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 50559.736] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 50559.736] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 50559.736] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 50559.736] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 50559.736] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 50559.736] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 14)
[ 50559.737] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 50559.737] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 50559.737] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 50559.737] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 50559.737] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 50559.738] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 50559.738] (II) No input driver specified, ignoring this device.
[ 50559.738] (II) This device may have been added with another device file.
[ 50559.739] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 50559.739] (II) No input driver specified, ignoring this device.
[ 50559.739] (II) This device may have been added with another device file.

skunktrader · 2012-04-22 05:57:17

Post the contents of your ~/xinitrc
Check to make sure you have consolekit installed

Last edited by skunktrader (2012-04-22 05:57:43)

ArchiMark · 2012-04-22 14:09:19

skunktrader wrote:

Post the contents of your ~/xinitrc
Check to make sure you have consolekit installed

Just says 'exec ck-launch-session startlxde'

That's it....as noted in an earlier post I didn't have a '.xinitrc' file until you suggested that I have this command it that file...so, I created a '.xinitrc' file and put that one line in it....that is only line in that file.

I have consolekit installed.

Last edited by ArchiMark (2012-04-22 14:22:50)

ArchiMark · 2012-04-22 14:49:50

UPDATE

I followed instructions on the SLiM page

https://wiki.archlinux.org/index.php/SLiM

and created a new '.xinitrc' file by copying the skeleton file referred to. Then edited it per the instructions and included 'dbus-launch' in the command too.

Then updated my '/etc/rc.conf' file to add 'dbus-launch' to my DAEMONS section.

Rebooted and voila! when I did 'startx' it worked this time and opened up lxde.

Also, now, I am able to use a USB Flash Drive successfully.

Thanks for all the help so far from everyone. I truly appreciate it and would not have gotten this far with Arch without it.

Now, I just need to get my networking sorted out for home and office networks (per my earlier posts...) and I should be in good shape....

Arch Linux

#26 2012-04-16 16:12:26

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#27 2012-04-16 16:14:33

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#28 2012-04-16 16:19:19

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#29 2012-04-16 16:22:14

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#30 2012-04-16 17:36:12

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#31 2012-04-18 20:35:10

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#32 2012-04-18 20:47:34

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#33 2012-04-18 21:40:19

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#34 2012-04-19 12:04:41

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#35 2012-04-19 13:29:26

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#36 2012-04-21 01:38:08

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#37 2012-04-21 03:44:12

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#38 2012-04-21 06:59:40

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#39 2012-04-21 07:24:46

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#40 2012-04-21 14:25:36

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#41 2012-04-21 14:26:23

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#42 2012-04-21 14:35:22

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#43 2012-04-21 14:49:52

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#44 2012-04-22 00:17:39

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#45 2012-04-22 01:52:22

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#46 2012-04-22 03:40:24

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#47 2012-04-22 04:39:57

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#48 2012-04-22 05:57:17

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#49 2012-04-22 14:09:19

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

#50 2012-04-22 14:49:50

Re: [SOLVED] Installd Arch -But Can't Get X Runn'g-HowToSetupNetConn?

Board footer