You are not logged in.
Sorry I have to ask this. I switched, at least temporarily, to Gnome. Gnome only loads a failsafe session and the chooser itself drops to Gnome 2. When I do log into Gnome - let me see if I can describe this - I get a new top and bottom bar for every successive login and the usable screen gets respectively smaller. For example, I've logged in 8 or 10 times and now have 8 to 10 top/menu bars in a Gnome Failsafe session and the desktop space is now about 1680 x 500.
The problem lies in the fact that I have two displays configured as separate screens, however the second (Screen1) is connected to the DVI and the TV. Unfortunately my card recognizes the DVI connection as the default and I have to turn on the TV if I want to get into the BIOS or GRUB menu. I've added "UseDisplayDevice" "CRT-1" to the Screen section so that the GUI will load on the desktop display and not on the TV. If I disconnected the DVI cable Gnome 3 will load properly. Here is my conf file /etc/X11/xorg.conf.d/10-monitor
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 1680 0
Option "Xinerama" "0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "SAMSUNG"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "SAMSUNG"
ModelName "SAMSUNG"
HorizSync 26.0 - 68.0
VertRefresh 24.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8400GS"
BusID "PCI:2:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8400GS"
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "UseDisplayDevice" "CRT-1"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: 1360x768_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSectionSo my question is: what's wrong? what to I need to add/change to get out of Failsafe sessions?
Offline
I am not sure about this, but this might be related to drivers. What kind of graphics driver do you have installed?
Offline