You are not logged in.

#1 2012-05-08 06:50:09

subatomic
Member
From: Berlin
Registered: 2005-06-26
Posts: 180

Gnome3 GDM only does Failsafe

Sorry I have to ask this. I switched, at least temporarily, to Gnome. Gnome only loads a failsafe session and the chooser itself drops to Gnome 2. When I do log into Gnome - let me see if I can describe this - I get a new top and bottom bar for every successive login and the usable screen gets respectively smaller. For example, I've logged in 8 or 10 times and now have 8 to 10 top/menu bars in a Gnome Failsafe session and the desktop space is now about 1680 x 500.

The problem lies in the fact that I have two displays configured as separate screens, however the second (Screen1) is connected to the DVI and the TV. Unfortunately my card recognizes the DVI connection as the default and I have to turn on the TV if I want to get into the BIOS or GRUB menu. I've added "UseDisplayDevice" "CRT-1" to the Screen section so that the GUI will load on the desktop display and not on the TV. If I disconnected the DVI cable Gnome 3 will load properly. Here is my conf file /etc/X11/xorg.conf.d/10-monitor

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" 1680 0
    Option         "Xinerama" "0"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "SAMSUNG"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "SAMSUNG"
    ModelName      "SAMSUNG"
    HorizSync       26.0 - 68.0
    VertRefresh     24.0 - 75.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400GS"
    BusID          "PCI:2:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400GS"
    BusID          "PCI:2:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "UseDisplayDevice" "CRT-1"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP: 1360x768_60 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

So my question is: what's wrong? what to I need to add/change to get out of Failsafe sessions?

Offline

#2 2012-05-09 19:26:59

mhfj
Member
From: Wiesbaden
Registered: 2012-04-19
Posts: 8

Re: Gnome3 GDM only does Failsafe

I am not sure about this, but this might be related to drivers. What kind of graphics driver do you have installed?

Offline

Board footer

Powered by FluxBB