You are not logged in.

#1 2012-05-22 21:22:35

Thom
Member
Registered: 2012-05-22
Posts: 72
Website

Dual Screen

Hi everyone !

After trying by myself to solve my problem, I just register here to ask some help.

I read the wiki about dual screen
https://wiki.archlinux.org/index.php/Du … .conf_file

But I'm still confuse...

About my config :
*Two screens : a wide : 1920x1080 and a 4/3 1400*1050 (xrand -q after)
*Ati HD 6870 with two DVI output (lspci | grep VGA after)
*I use subtle as windows manager.

I have two issues/

1 - I've got a troubleshooting, I don't arrive to setup my second screen... It's constantly tremble...

2 - I don't know how to save the configuration file for starting with these resolution. I have to fixed them evrey time I log in... I can change resolution with arandr

I've try to install XRandR.
I've try to configure the files in : /etc/X11/xorg.conf.d/10-monitor.conf but I failed every time so i need to delete it...

Thanks for helping.
(I don't know witch formula to use in this case)
(Sorry for my bad English)

xrandr -q

Screen 0: minimum 320 x 200, current 3320 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
   1920x1080      59.9*+
   1600x1200      60.0  
   1680x1050      60.0  
   1280x1024      75.0     60.0  
   1440x900       75.0     59.9  
   1152x864       75.0  
   1024x768       75.1     70.1     60.0  
   800x600        72.2     75.0     60.3     56.2  
   640x480        72.8     75.0     60.0  
   720x400        70.1  
DVI-1 connected 1400x1050+1920+0 (normal left inverted right x axis y axis) 408mm x 306mm
   1400x1050      60.0*+
   1280x1024      75.0     60.0  
   1280x960       60.0  
   1152x864       75.0  
   1024x768       75.1     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  

lspci | grep VGA

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts XT [ATI Radeon HD 6800 Series]

Offline

#2 2012-05-22 21:36:47

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,183

Re: Dual Screen

I would simply use a xrandr command in my .xinitrc to set my screens as required. so in your case, it would be something to the effect of

xrandr --output DVI-0 --auto --output DVI-1 --auto --right-of DVI-0

if that doesn't set your resolutions correctly you can remove the --auto flag and explicitly add the mode you want using the --mode flag.

See

man xrandr

for more info.


Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#3 2012-05-22 22:14:01

Thom
Member
Registered: 2012-05-22
Posts: 72
Website

Re: Dual Screen

The code from arandr works for the first screen (1920x1080) when i use in the term but don't start with X. Do I need to put him before launching subtle.
My second screen is still tremble and unusable...

My .xinitrc

#~/.xinitrc
#
#Ce fichier est executé par startx au démarrage

#Verrouille sur on le pavé numérique au démarrage
numlockx &

#lancer subtle
exec dbus-launch  ck-launch-session subtle

#Configure les écrans
xrandr --output DisplayPort-0 --off --output DVI-1 --mode 1400x1050 --pos 1920x0 --rotate normal --output DVI-0 --mode 1920x1080 --pos 0x0 --rotate normal --output HDMI-0 --off

Last edited by Thom (2012-05-22 22:28:39)

Offline

#4 2012-05-22 22:34:08

Pres
Member
Registered: 2011-09-12
Posts: 423

Re: Dual Screen

Put it before launching subtle.

Offline

#5 2012-05-22 22:49:29

Thom
Member
Registered: 2012-05-22
Posts: 72
Website

Re: Dual Screen

Thanks you very much!

Second problem : SOLVED

It's works fine for the first screens which got the good resolution at start. But, I still can't use the second screen.
It's look a frequency issue?


#~/.xinitrc
#
#Ce fichier est executé par startx au démarrage

#Verrouille sur on le pavé numérique au démarrage
numlockx &

#Configure les écrans
xrandr --output DisplayPort-0 --off --output DVI-1 --mode 1400x1050 --pos 1920x0 --rotate normal --output DVI-0 --mode 1920x1080 --pos 0x0 --rotate normal --output HDMI-0 --off

#lancer subtle
exec dbus-launch  ck-launch-session subtle

Last edited by Thom (2012-05-22 22:49:56)

Offline

#6 2012-05-23 00:55:44

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Dual Screen

The xrandr switch to change the frequency is "-r". Does the second screen stop trembling if you select one of the lower resolutions that has 70Hz or 75Hz available?


6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

Board footer

Powered by FluxBB