Arch Linux

Prototype

Member

Registered: 2011-05-30

Posts: 28

lspci not working properly

When I run lspci this is what shows

00:00.0 Class 0600: Device 8086:0044 (rev 02)
00:02.0 Class 0300: Device 8086:0046 (rev 02)
00:16.0 Class 0780: Device 8086:3b64 (rev 06)
00:1a.0 Class 0c03: Device 8086:3b3c (rev 05)
00:1b.0 Class 0403: Device 8086:3b56 (rev 05)
00:1c.0 Class 0604: Device 8086:3b42 (rev 05)
00:1c.1 Class 0604: Device 8086:3b44 (rev 05)
00:1c.2 Class 0604: Device 8086:3b46 (rev 05)
00:1c.4 Class 0604: Device 8086:3b4a (rev 05)
00:1d.0 Class 0c03: Device 8086:3b34 (rev 05)
00:1e.0 Class 0604: Device 8086:2448 (rev a5)
00:1f.0 Class 0601: Device 8086:3b09 (rev 05)
00:1f.2 Class 0106: Device 8086:3b29 (rev 05)
00:1f.3 Class 0c05: Device 8086:3b30 (rev 05)
00:1f.6 Class 1180: Device 8086:3b32 (rev 05)
05:00.0 Class 0280: Device 14e4:4727 (rev 01)
06:00.0 Class 0200: Device 10ec:8136 (rev 02)
ff:00.0 Class 0600: Device 8086:2c62 (rev 02)
ff:00.1 Class 0600: Device 8086:2d01 (rev 02)
ff:02.0 Class 0600: Device 8086:2d10 (rev 02)
ff:02.1 Class 0600: Device 8086:2d11 (rev 02)
ff:02.2 Class 0600: Device 8086:2d12 (rev 02)
ff:02.3 Class 0600: Device 8086:2d13 (rev 02)

Inxsible

Forum Fellow

From: Chicago

Registered: 2008-06-09

Posts: 9,183

Re: lspci not working properly

check your error logs and dmesg to see if it shows anything that might be wrong.

---

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

falconindy

Developer

From: New York, USA

Registered: 2009-10-22

Posts: 4,111

Website

Re: lspci not working properly

I'd say that /usr/share/hwdata/pci.ids is missing,  probably as a result of a botched upgrade involving -f, or --force.

---

blog | ±github

rwfowler

Member

Registered: 2012-06-09

Posts: 1

Re: lspci not working properly

I had the same problem. Syncing core/hwids did the trick for me.