You are not logged in.
Is there something I need to add to systemctl to make it have graphics acceleration again?
I already have been able to get xdm.service to work just by copying kdm.service and changing the commandline to xdm, I just can't get the graphics acceleration going under systemd.
Last edited by nomorewindows (2012-06-14 12:25:36)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
No, it all works okay here. Can you pastebin your /var/log/Xorg.0.log file and provide us a link?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
[ 27.384]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 27.384] X Protocol Version 11, Revision 0
[ 27.384] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 27.384] Current Operating System: Linux mopower 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 27.384] Kernel command line: root=/dev/sda5 ro init=/bin/systemd vga=773 i915.i915_enable_rc6=1
[ 27.384] Build Date: 30 May 2012 07:24:13PM
[ 27.384]
[ 27.384] Current version of pixman: 0.26.0
[ 27.384] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.384] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.384] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 13:36:52 2012
[ 27.445] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.445] (==) No Layout section. Using the first Screen section.
[ 27.445] (==) No screen section available. Using defaults.
[ 27.445] (**) |-->Screen "Default Screen Section" (0)
[ 27.445] (**) | |-->Monitor "<default monitor>"
[ 27.467] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.467] (==) Automatically adding devices
[ 27.467] (==) Automatically enabling devices
[ 27.681] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.681] Entry deleted from font path.
[ 27.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.860] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.860] (II) Loader magic: 0x7c58e0
[ 27.860] (II) Module ABI versions:
[ 27.860] X.Org ANSI C Emulation: 0.4
[ 27.860] X.Org Video Driver: 12.0
[ 27.860] X.Org XInput driver : 16.0
[ 27.860] X.Org Server Extension : 6.0
[ 27.861] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30a5 rev 3, Mem @ 0xd0200000/524288, 0xc0000000/268435456, 0xd0300000/262144, I/O @ 0x00001800/8
[ 27.862] (--) PCI: (0:0:2:1) 8086:27a6:103c:30a5 rev 3, Mem @ 0xd0280000/524288
[ 27.862] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.862] (II) LoadModule: "extmod"
[ 28.034] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.109] (II) Module extmod: vendor="X.Org Foundation"
[ 28.109] compiled for 1.12.2, module version = 1.0.0
[ 28.109] Module class: X.Org Server Extension
[ 28.109] ABI class: X.Org Server Extension, version 6.0
[ 28.109] (II) Loading extension MIT-SCREEN-SAVER
[ 28.109] (II) Loading extension XFree86-VidModeExtension
[ 28.109] (II) Loading extension XFree86-DGA
[ 28.109] (II) Loading extension DPMS
[ 28.109] (II) Loading extension XVideo
[ 28.109] (II) Loading extension XVideo-MotionCompensation
[ 28.109] (II) Loading extension X-Resource
[ 28.109] (II) LoadModule: "dbe"
[ 28.110] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.139] (II) Module dbe: vendor="X.Org Foundation"
[ 28.139] compiled for 1.12.2, module version = 1.0.0
[ 28.139] Module class: X.Org Server Extension
[ 28.139] ABI class: X.Org Server Extension, version 6.0
[ 28.139] (II) Loading extension DOUBLE-BUFFER
[ 28.139] (II) LoadModule: "glx"
[ 28.139] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 28.211] (II) Module glx: vendor="X.Org Foundation"
[ 28.211] compiled for 1.12.2, module version = 1.0.0
[ 28.211] ABI class: X.Org Server Extension, version 6.0
[ 28.229] (==) AIGLX enabled
[ 28.243] (II) Loading extension GLX
[ 28.243] (II) LoadModule: "record"
[ 28.243] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 28.299] (II) Module record: vendor="X.Org Foundation"
[ 28.299] compiled for 1.12.2, module version = 1.13.0
[ 28.299] Module class: X.Org Server Extension
[ 28.300] ABI class: X.Org Server Extension, version 6.0
[ 28.300] (II) Loading extension RECORD
[ 28.300] (II) LoadModule: "dri"
[ 28.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 28.408] (II) Module dri: vendor="X.Org Foundation"
[ 28.408] compiled for 1.12.2, module version = 1.0.0
[ 28.408] ABI class: X.Org Server Extension, version 6.0
[ 28.408] (II) Loading extension XFree86-DRI
[ 28.408] (II) LoadModule: "dri2"
[ 28.408] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 28.442] (II) Module dri2: vendor="X.Org Foundation"
[ 28.442] compiled for 1.12.2, module version = 1.2.0
[ 28.442] ABI class: X.Org Server Extension, version 6.0
[ 28.442] (II) Loading extension DRI2
[ 28.442] (==) Matched intel as autoconfigured driver 0
[ 28.442] (==) Matched vesa as autoconfigured driver 1
[ 28.442] (==) Matched fbdev as autoconfigured driver 2
[ 28.442] (==) Assigned the driver to the xf86ConfigLayout
[ 28.442] (II) LoadModule: "intel"
[ 28.442] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.609] (II) Module intel: vendor="X.Org Foundation"
[ 28.609] compiled for 1.12.2, module version = 2.19.0
[ 28.609] Module class: X.Org Video Driver
[ 28.609] ABI class: X.Org Video Driver, version 12.0
[ 28.609] (II) LoadModule: "vesa"
[ 28.609] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.633] (II) Module vesa: vendor="X.Org Foundation"
[ 28.633] compiled for 1.12.0, module version = 2.3.1
[ 28.633] Module class: X.Org Video Driver
[ 28.633] ABI class: X.Org Video Driver, version 12.0
[ 28.633] (II) LoadModule: "fbdev"
[ 28.633] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.648] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.648] compiled for 1.11.99.903, module version = 0.4.2
[ 28.648] ABI class: X.Org Video Driver, version 12.0
[ 28.648] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 28.648] (II) VESA: driver for VESA chipsets: vesa
[ 28.648] (II) FBDEV: driver for framebuffer: fbdev
[ 28.648] (--) using VT number 2
[ 28.648] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 28.648] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 28.655] (WW) Falling back to old probe method for vesa
[ 28.655] (WW) Falling back to old probe method for fbdev
[ 28.656] (II) Loading sub module "fbdevhw"
[ 28.656] (II) LoadModule: "fbdevhw"
[ 28.656] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.675] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.675] compiled for 1.12.2, module version = 0.0.2
[ 28.675] ABI class: X.Org Video Driver, version 12.0
[ 28.675] drmOpenDevice: node name is /dev/dri/card0
[ 28.675] drmOpenDevice: open result is 10, (OK)
[ 28.675] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 28.675] drmOpenDevice: node name is /dev/dri/card0
[ 28.675] drmOpenDevice: open result is 10, (OK)
[ 28.675] drmOpenByBusid: drmOpenMinor returns 10
[ 28.675] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 28.675] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.675] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.675] (==) intel(0): RGB weight 888
[ 28.675] (==) intel(0): Default visual is TrueColor
[ 28.675] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 28.675] (--) intel(0): Chipset: "945GM"
[ 28.675] (**) intel(0): Relaxed fencing disabled
[ 28.675] (**) intel(0): Wait on SwapBuffers? enabled
[ 28.675] (**) intel(0): Triple buffering? enabled
[ 28.675] (**) intel(0): Framebuffer tiled
[ 28.676] (**) intel(0): Pixmaps tiled
[ 28.676] (**) intel(0): 3D buffers tiled
[ 28.676] (**) intel(0): SwapBuffers wait enabled
[ 28.676] (==) intel(0): video overlay key set to 0x101fe
[ 28.676] (II) intel(0): Output LVDS1 has no monitor section
[ 28.693] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 28.720] (II) intel(0): Output VGA1 has no monitor section
[ 29.034] (II) intel(0): Output TV1 has no monitor section
[ 29.034] (II) intel(0): EDID for output LVDS1
[ 29.034] (II) intel(0): Manufacturer: QDS Model: 27 Serial#: 0
[ 29.034] (II) intel(0): Year: 2005 Week: 0
[ 29.034] (II) intel(0): EDID Version: 1.3
[ 29.034] (II) intel(0): Digital Display Input
[ 29.034] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 29.034] (II) intel(0): Gamma: 2.20
[ 29.034] (II) intel(0): No DPMS capabilities specified
[ 29.034] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.034] (II) intel(0): First detailed timing is preferred mode
[ 29.034] (II) intel(0): redX: 0.575 redY: 0.359 greenX: 0.319 greenY: 0.532
[ 29.034] (II) intel(0): blueX: 0.155 blueY: 0.129 whiteX: 0.312 whiteY: 0.328
[ 29.034] (II) intel(0): Manufacturer's mask: 0
[ 29.034] (II) intel(0): Supported detailed timing:
[ 29.034] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 29.034] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 29.034] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0
[ 29.034] (II) intel(0): Unknown vendor-specific block f
[ 29.034] (II) intel(0): QUANTADISPLAY
[ 29.034] (II) intel(0): QD15TL024
[ 29.034] (II) intel(0): EDID (in hex):
[ 29.034] (II) intel(0): 00ffffffffffff004493270000000000
[ 29.034] (II) intel(0): 000f0103802115780a4dc0935c518827
[ 29.034] (II) intel(0): 21505400000001010101010101010101
[ 29.034] (II) intel(0): 010101010101ea1a0080502010301520
[ 29.034] (II) intel(0): 44004bcf100000180000000f0008002a
[ 29.034] (II) intel(0): 0001000400324a041402000000fe0051
[ 29.034] (II) intel(0): 55414e5441444953504c4159000000fe
[ 29.034] (II) intel(0): 0051443135544c3032340a20202000aa
[ 29.034] (II) intel(0): EDID vendor "QDS", prod id 39
[ 29.034] (II) intel(0): Printing DDC gathered Modelines:
[ 29.034] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 29.035] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.035] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.035] (II) intel(0): Printing probed modes for output LVDS1
[ 29.035] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 29.035] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 29.035] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 29.035] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 29.035] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 29.060] (II) intel(0): EDID for output VGA1
[ 29.374] (II) intel(0): EDID for output TV1
[ 29.374] (II) intel(0): Output LVDS1 connected
[ 29.374] (II) intel(0): Output VGA1 disconnected
[ 29.374] (II) intel(0): Output TV1 disconnected
[ 29.374] (II) intel(0): Using exact sizes for initial modes
[ 29.374] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 29.374] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.374] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.374] (**) intel(0): Display dimensions: (330, 210) mm
[ 29.374] (**) intel(0): DPI set to (98, 96)
[ 29.374] (II) Loading sub module "fb"
[ 29.374] (II) LoadModule: "fb"
[ 29.374] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.517] (II) Module fb: vendor="X.Org Foundation"
[ 29.517] compiled for 1.12.2, module version = 1.0.0
[ 29.517] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.517] (II) Loading sub module "dri2"
[ 29.517] (II) LoadModule: "dri2"
[ 29.518] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.518] (II) Module dri2: vendor="X.Org Foundation"
[ 29.518] compiled for 1.12.2, module version = 1.2.0
[ 29.518] ABI class: X.Org Server Extension, version 6.0
[ 29.518] (II) UnloadModule: "vesa"
[ 29.518] (II) Unloading vesa
[ 29.518] (II) UnloadModule: "fbdev"
[ 29.518] (II) Unloading fbdev
[ 29.518] (II) UnloadSubModule: "fbdevhw"
[ 29.518] (II) Unloading fbdevhw
[ 29.518] (==) Depth 24 pixmap format is 32 bpp
[ 29.518] (II) intel(0): [DRI2] Setup complete
[ 29.518] (II) intel(0): [DRI2] DRI driver: i915
[ 29.518] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 29.605] (II) UXA(0): Driver registered support for the following operations:
[ 29.605] (II) solid
[ 29.605] (II) copy
[ 29.605] (II) composite (RENDER acceleration)
[ 29.605] (II) put_image
[ 29.605] (II) get_image
[ 29.605] (==) intel(0): Backing store disabled
[ 29.605] (==) intel(0): Silken mouse enabled
[ 29.605] (II) intel(0): Initializing HW Cursor
[ 29.605] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.640] (==) intel(0): DPMS enabled
[ 29.640] (==) intel(0): Intel XvMC decoder disabled
[ 29.640] (II) intel(0): Set up textured video
[ 29.640] (II) intel(0): Set up overlay video
[ 29.640] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.640] (==) intel(0): hotplug detection: "enabled"
[ 29.673] (--) RandR disabled
[ 29.673] (II) Initializing built-in extension Generic Event Extension
[ 29.673] (II) Initializing built-in extension SHAPE
[ 29.673] (II) Initializing built-in extension MIT-SHM
[ 29.673] (II) Initializing built-in extension XInputExtension
[ 29.673] (II) Initializing built-in extension XTEST
[ 29.673] (II) Initializing built-in extension BIG-REQUESTS
[ 29.673] (II) Initializing built-in extension SYNC
[ 29.673] (II) Initializing built-in extension XKEYBOARD
[ 29.673] (II) Initializing built-in extension XC-MISC
[ 29.673] (II) Initializing built-in extension SECURITY
[ 29.673] (II) Initializing built-in extension XINERAMA
[ 29.673] (II) Initializing built-in extension XFIXES
[ 29.673] (II) Initializing built-in extension RENDER
[ 29.673] (II) Initializing built-in extension RANDR
[ 29.673] (II) Initializing built-in extension COMPOSITE
[ 29.673] (II) Initializing built-in extension DAMAGE
[ 30.511] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.512] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.512] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.512] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.512] (II) AIGLX: Loaded and initialized i915
[ 30.512] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.512] (II) intel(0): Setting screen physical size to 338 x 211
[ 31.570] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 31.570] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.570] (II) LoadModule: "evdev"
[ 31.570] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.588] (II) Module evdev: vendor="X.Org Foundation"
[ 31.588] compiled for 1.12.0, module version = 2.7.0
[ 31.588] Module class: X.Org XInput Driver
[ 31.588] ABI class: X.Org XInput driver, version 16.0
[ 31.588] (II) Using input driver 'evdev' for 'Power Button'
[ 31.588] (**) Power Button: always reports core events
[ 31.588] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 31.588] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.588] (--) evdev: Power Button: Found keys
[ 31.588] (II) evdev: Power Button: Configuring as keyboard
[ 31.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 31.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.589] (**) Option "xkb_rules" "evdev"
[ 31.589] (**) Option "xkb_model" "evdev"
[ 31.589] (**) Option "xkb_layout" "us"
[ 31.622] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 31.622] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 31.623] (II) Using input driver 'evdev' for 'Video Bus'
[ 31.623] (**) Video Bus: always reports core events
[ 31.623] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 31.623] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 31.623] (--) evdev: Video Bus: Found keys
[ 31.623] (II) evdev: Video Bus: Configuring as keyboard
[ 31.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event5"
[ 31.623] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 31.623] (**) Option "xkb_rules" "evdev"
[ 31.623] (**) Option "xkb_model" "evdev"
[ 31.623] (**) Option "xkb_layout" "us"
[ 31.623] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 31.623] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.623] (II) Using input driver 'evdev' for 'Power Button'
[ 31.624] (**) Power Button: always reports core events
[ 31.624] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 31.624] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.624] (--) evdev: Power Button: Found keys
[ 31.624] (II) evdev: Power Button: Configuring as keyboard
[ 31.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 31.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 31.624] (**) Option "xkb_rules" "evdev"
[ 31.624] (**) Option "xkb_model" "evdev"
[ 31.624] (**) Option "xkb_layout" "us"
[ 31.624] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 31.624] (II) No input driver specified, ignoring this device.
[ 31.624] (II) This device may have been added with another device file.
[ 31.625] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 31.625] (II) No input driver specified, ignoring this device.
[ 31.625] (II) This device may have been added with another device file.
[ 31.625] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 31.625] (II) No input driver specified, ignoring this device.
[ 31.625] (II) This device may have been added with another device file.
[ 31.626] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 31.626] (II) No input driver specified, ignoring this device.
[ 31.626] (II) This device may have been added with another device file.
[ 31.626] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 31.626] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.626] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 31.626] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.626] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 31.626] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 31.626] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 31.626] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.626] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 31.626] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 31.626] (**) Option "xkb_rules" "evdev"
[ 31.626] (**) Option "xkb_model" "evdev"
[ 31.626] (**) Option "xkb_layout" "us"
[ 31.627] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 31.627] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 31.627] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 31.627] (II) LoadModule: "synaptics"
[ 31.627] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 31.690] (II) Module synaptics: vendor="X.Org Foundation"
[ 31.690] compiled for 1.12.1, module version = 1.6.1
[ 31.690] Module class: X.Org XInput Driver
[ 31.690] ABI class: X.Org XInput driver, version 16.0
[ 31.690] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 31.690] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 31.690] (**) Option "Device" "/dev/input/event10"
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 31.693] (**) Option "TapButton1" "1"
[ 31.693] (**) Option "TapButton2" "2"
[ 31.693] (**) Option "TapButton3" "3"
[ 31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.693] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 31.693] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event10"
[ 31.693] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 31.694] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 31.694] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31.694] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 31.694] (II) No input driver specified, ignoring this device.
[ 31.694] (II) This device may have been added with another device file.
[ 31.695] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 31.695] (II) No input driver specified, ignoring this device.
[ 31.695] (II) This device may have been added with another device file.
[ 31.695] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 31.695] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 31.695] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 31.696] (**) HP WMI hotkeys: always reports core events
[ 31.696] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[ 31.696] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 31.696] (--) evdev: HP WMI hotkeys: Found keys
[ 31.696] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 31.696] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 31.696] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[ 31.696] (**) Option "xkb_rules" "evdev"
[ 31.696] (**) Option "xkb_model" "evdev"
[ 31.696] (**) Option "xkb_layout" "us"
[ 44.181] (II) intel(0): EDID vendor "QDS", prod id 39
[ 44.181] (II) intel(0): Printing DDC gathered Modelines:
[ 44.181] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 51.024] (II) intel(0): EDID vendor "QDS", prod id 39
[ 51.024] (II) intel(0): Printing DDC gathered Modelines:
[ 51.024] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 54.244] (II) intel(0): EDID vendor "QDS", prod id 39
[ 54.244] (II) intel(0): Printing DDC gathered Modelines:
[ 54.245] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 175.028] (II) intel(0): EDID vendor "QDS", prod id 39
[ 175.028] (II) intel(0): Printing DDC gathered Modelines:
[ 175.028] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 331.983] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 635.685] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 635.690] (II) intel(0): EDID vendor "QDS", prod id 39
[ 635.690] (II) intel(0): Printing DDC gathered Modelines:
[ 635.690] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 636.030] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1191.920] (II) evdev: Power Button: Close
[ 1191.920] (II) UnloadModule: "evdev"
[ 1191.943] (II) evdev: Video Bus: Close
[ 1191.943] (II) UnloadModule: "evdev"
[ 1191.950] (II) evdev: Power Button: Close
[ 1191.950] (II) UnloadModule: "evdev"
[ 1191.986] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1191.987] (II) UnloadModule: "evdev"
[ 1192.013] (II) UnloadModule: "synaptics"
[ 1192.020] (II) evdev: HP WMI hotkeys: Close
[ 1192.020] (II) UnloadModule: "evdev"
[ 1192.025] 6 XSELINUXs still allocated at reset
[ 1192.025] SCREEN: 0 objects of 272 bytes = 0 total bytes 0 private allocs
[ 1192.025] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[ 1192.025] CLIENT: 0 objects of 208 bytes = 0 total bytes 0 private allocs
[ 1192.025] WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[ 1192.025] PIXMAP: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[ 1192.025] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[ 1192.025] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 1192.025] GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 1192.025] 6 SELECTIONs still allocated at reset
[ 1192.025] WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[ 1192.025] PIXMAP: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[ 1192.025] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[ 1192.025] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[ 1192.025] GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[ 1192.025] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 1192.027] (II) intel(0): [DRI2] Setup complete
[ 1192.027] (II) intel(0): [DRI2] DRI driver: i915
[ 1192.027] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 1192.027] (II) UXA(0): Driver registered support for the following operations:
[ 1192.027] (II) solid
[ 1192.027] (II) copy
[ 1192.027] (II) composite (RENDER acceleration)
[ 1192.027] (II) put_image
[ 1192.027] (II) get_image
[ 1192.027] (II) intel(0): Initializing HW Cursor
[ 1192.027] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1192.070] (==) intel(0): DPMS enabled
[ 1192.070] (==) intel(0): Intel XvMC decoder disabled
[ 1192.070] (II) intel(0): Set up textured video
[ 1192.070] (II) intel(0): Set up overlay video
[ 1192.070] (II) intel(0): direct rendering: DRI2 Enabled
[ 1192.070] (==) intel(0): hotplug detection: "enabled"
[ 1192.093] (--) RandR disabled
[ 1192.103] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1192.103] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1192.103] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1192.103] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1192.103] (II) AIGLX: Loaded and initialized i915
[ 1192.103] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1192.104] (II) intel(0): Setting screen physical size to 338 x 211
[ 1192.239] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1192.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1192.239] (II) Using input driver 'evdev' for 'Power Button'
[ 1192.239] (**) Power Button: always reports core events
[ 1192.239] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1192.240] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1192.240] (--) evdev: Power Button: Found keys
[ 1192.240] (II) evdev: Power Button: Configuring as keyboard
[ 1192.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1192.240] (**) Option "xkb_rules" "evdev"
[ 1192.240] (**) Option "xkb_model" "evdev"
[ 1192.240] (**) Option "xkb_layout" "us"
[ 1192.273] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 1192.273] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1192.273] (II) Using input driver 'evdev' for 'Video Bus'
[ 1192.273] (**) Video Bus: always reports core events
[ 1192.273] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 1192.273] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1192.273] (--) evdev: Video Bus: Found keys
[ 1192.273] (II) evdev: Video Bus: Configuring as keyboard
[ 1192.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event5"
[ 1192.274] (**) Option "xkb_rules" "evdev"
[ 1192.274] (**) Option "xkb_model" "evdev"
[ 1192.274] (**) Option "xkb_layout" "us"
[ 1192.274] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1192.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1192.274] (II) Using input driver 'evdev' for 'Power Button'
[ 1192.274] (**) Power Button: always reports core events
[ 1192.274] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1192.274] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1192.274] (--) evdev: Power Button: Found keys
[ 1192.274] (II) evdev: Power Button: Configuring as keyboard
[ 1192.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 1192.274] (**) Option "xkb_rules" "evdev"
[ 1192.274] (**) Option "xkb_model" "evdev"
[ 1192.274] (**) Option "xkb_layout" "us"
[ 1192.275] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1192.275] (II) No input driver specified, ignoring this device.
[ 1192.275] (II) This device may have been added with another device file.
[ 1192.276] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 1192.276] (II) No input driver specified, ignoring this device.
[ 1192.276] (II) This device may have been added with another device file.
[ 1192.276] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 1192.276] (II) No input driver specified, ignoring this device.
[ 1192.276] (II) This device may have been added with another device file.
[ 1192.276] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 1192.276] (II) No input driver specified, ignoring this device.
[ 1192.276] (II) This device may have been added with another device file.
[ 1192.277] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1192.277] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1192.277] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1192.277] (**) AT Translated Set 2 keyboard: always reports core events
[ 1192.277] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1192.277] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1192.277] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1192.277] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1192.277] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1192.277] (**) Option "xkb_rules" "evdev"
[ 1192.277] (**) Option "xkb_model" "evdev"
[ 1192.277] (**) Option "xkb_layout" "us"
[ 1192.278] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 1192.278] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1192.278] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1192.278] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1192.278] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1192.278] (**) Option "Device" "/dev/input/event10"
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1192.280] (**) Option "TapButton1" "1"
[ 1192.280] (**) Option "TapButton2" "2"
[ 1192.280] (**) Option "TapButton3" "3"
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1192.280] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1192.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event10"
[ 1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1192.281] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1192.281] (II) No input driver specified, ignoring this device.
[ 1192.281] (II) This device may have been added with another device file.
[ 1192.281] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1192.281] (II) No input driver specified, ignoring this device.
[ 1192.281] (II) This device may have been added with another device file.
[ 1192.282] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 1192.282] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 1192.282] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 1192.282] (**) HP WMI hotkeys: always reports core events
[ 1192.282] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[ 1192.282] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 1192.282] (--) evdev: HP WMI hotkeys: Found keys
[ 1192.282] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 1192.282] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 1192.282] (**) Option "xkb_rules" "evdev"
[ 1192.282] (**) Option "xkb_model" "evdev"
[ 1192.282] (**) Option "xkb_layout" "us"
[ 1210.886] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2946.547] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2946.559] (II) intel(0): EDID vendor "QDS", prod id 39
[ 2946.560] (II) intel(0): Printing DDC gathered Modelines:
[ 2946.560] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 2946.896] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2950.573] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2951.164] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2951.183] (II) intel(0): EDID vendor "QDS", prod id 39
[ 2951.183] (II) intel(0): Printing DDC gathered Modelines:
[ 2951.183] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 2951.515] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2952.533] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3126.154] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3126.166] (II) intel(0): EDID vendor "QDS", prod id 39
[ 3126.166] (II) intel(0): Printing DDC gathered Modelines:
[ 3126.166] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 3126.503] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3128.789] (II) intel(0): EDID vendor "QDS", prod id 39
[ 3128.789] (II) intel(0): Printing DDC gathered Modelines:
[ 3128.789] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 3129.717] (II) intel(0): EDID vendor "QDS", prod id 39
[ 3129.717] (II) intel(0): Printing DDC gathered Modelines:
[ 3129.717] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 3131.550] (II) intel(0): EDID vendor "QDS", prod id 39
[ 3131.550] (II) intel(0): Printing DDC gathered Modelines:
[ 3131.550] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)I don't see anything unusual?
This line might be interesting:
[ 28.648] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 28.648] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 28.655] (WW) Falling back to old probe method for vesa
[ 28.655] (WW) Falling back to old probe method for fbdevLast edited by nomorewindows (2012-06-11 19:38:47)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
I don't know, it looks to me like acceleration should be working (DRI2 is enabled)
What is your indication there is a problem?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
I don't know, it looks to me like acceleration should be working (DRI2 is enabled)
What is your indication there is a problem?
The graphics are choppy, and framerates are awfully slow as if I was using something like pekwm that doesn't use the acceleration.
Makes using gnome cumbersome.
When I go back to init, it works fine.
When I start gnome as root, the framerates are what they would be for full acceleration.
Mplayer videos lag slightly behind the audio.
Last edited by nomorewindows (2012-06-11 20:04:12)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
Can I suggest you diff the output of lsmod when using initscripts vs when using systemd?
Is it possible there is something consuming CPU time in systemd? Have you looked at the processor load with a tool like htop?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
Reinstalled gnome-shell.
Have restarted under initscripts with gnome-session-check-accelerated(-helper) (gnome-session) is now segfaulting along with glxinfo but this time it is saying error 4 with i915_dri.so (intel-dri). Have reinstalled intel-dri, still with failsafe mode, something is broken after reinstalling gnome-shell or rebooting.
Getting failsafe graphics mode on gnome, which means the accel is off now, and realized by gnome.
Now intensive processes were found under top or htop.
lsmod_initscripts:
Module Size Used by
nfsd 260316 2
xfs 735087 1
exportfs 3665 2 xfs,nfsd
usb_storage 44594 0
uas 8026 0
arc4 1410 2
b43 347913 0
bcma 21810 1 b43
mac80211 391455 1 b43
cfg80211 176857 2 mac80211,b43
ssb 48216 1 b43
joydev 9991 0
pcmcia 36073 2 ssb,b43
sr_mod 14823 0
cdrom 35744 1 sr_mod
i915 432558 2
i2c_algo_bit 5359 1 i915
drm_kms_helper 26947 1 i915
drm 204375 3 drm_kms_helper,i915
i2c_i801 8116 0
i2c_core 20593 5 i2c_i801,drm,drm_kms_helper,i2c_algo_bit,i915
snd_hda_codec_conexant 47100 1
snd_hda_intel 24021 0
hp_wmi 7802 0
snd_hda_codec 92713 2 snd_hda_intel,snd_hda_codec_conexant
snd_hwdep 6556 1 snd_hda_codec
intel_agp 10872 1 i915
8139too 20456 0
iTCO_wdt 12877 0
8139cp 19567 0
sparse_keymap 3056 1 hp_wmi
rfkill 15604 2 hp_wmi,cfg80211
pcspkr 1835 0
iTCO_vendor_support 1929 1 iTCO_wdt
mii 4091 2 8139cp,8139too
intel_gtt 14007 3 intel_agp,i915
uhci_hcd 23404 0
wmi 8475 1 hp_wmi
mmc_core 82735 2 ssb,b43
ehci_hcd 44136 0
snd_pcm 74812 2 snd_hda_codec,snd_hda_intel
serio_raw 4653 0
psmouse 69539 0
battery 6485 0
video 11243 1 i915
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
usbcore 147077 5 ehci_hcd,uhci_hcd,uas,usb_storage
thermal 7959 0
ac 2376 0
pcmcia_core 12189 1 pcmcia
usb_common 954 1 usbcore
evdev 9402 0
button 4502 1 i915
processor 26144 1
snd_seq_dummy 1463 0
snd_seq_oss 29016 0
snd_seq_midi_event 5692 1 snd_seq_oss
snd_seq 51137 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5300 3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_timer 19222 2 snd_seq,snd_pcm
snd 59656 9 snd_timer,snd_seq_device,snd_seq,snd_seq_oss,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant
soundcore 6082 1 snd
cuse 5631 0
fuse 68162 1 cuse
nfs 311571 0
nfs_acl 2359 2 nfs,nfsd
lockd 74176 2 nfs,nfsd
auth_rpcgss 42223 2 nfs,nfsd
sunrpc 201789 6 auth_rpcgss,lockd,nfs_acl,nfs,nfsd
fscache 41123 1 nfs
ext4 424467 5
crc16 1359 1 ext4
jbd2 71704 1 ext4
mbcache 5977 1 ext4
reiserfs 240101 1
sd_mod 28059 9
ata_piix 22136 0
ahci 20293 8
libahci 19999 1 ahci
libata 167083 3 libahci,ahci,ata_piix
scsi_mod 133422 5 libata,sd_mod,sr_mod,uas,usb_storagelsmod_systemd:
Module Size Used by
nls_cp437 5953 2
vfat 10183 2
fat 49739 1 vfat
xfs 735087 1
exportfs 3665 1 xfs
usb_storage 44594 2
uas 8026 0
arc4 1410 2
b43 347913 0
joydev 9991 0
bcma 21810 1 b43
mac80211 391455 1 b43
snd_hda_codec_conexant 47100 1
i915 432558 2
i2c_algo_bit 5359 1 i915
cfg80211 176857 2 mac80211,b43
drm_kms_helper 26947 1 i915
snd_hda_intel 24021 3
iTCO_wdt 12877 0
drm 204375 3 drm_kms_helper,i915
snd_hda_codec 92713 2 snd_hda_intel,snd_hda_codec_conexant
sr_mod 14823 0
iTCO_vendor_support 1929 1 iTCO_wdt
cdrom 35744 1 sr_mod
ssb 48216 1 b43
hp_wmi 7802 0
pcmcia 36073 2 ssb,b43
intel_agp 10872 1 i915
i2c_i801 8116 0
i2c_core 20593 5 i2c_i801,drm,drm_kms_helper,i2c_algo_bit,i915
8139too 20456 0
8139cp 19567 0
mii 4091 2 8139cp,8139too
snd_hwdep 6556 1 snd_hda_codec
snd_pcm 74812 2 snd_hda_codec,snd_hda_intel
mmc_core 82735 2 ssb,b43
intel_gtt 14007 3 intel_agp,i915
sparse_keymap 3056 1 hp_wmi
uhci_hcd 23404 0
ehci_hcd 44136 0
serio_raw 4653 0
psmouse 69539 0
usbcore 147077 5 ehci_hcd,uhci_hcd,uas,usb_storage
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
pcmcia_core 12189 1 pcmcia
pcspkr 1835 0
rfkill 15604 4 hp_wmi,cfg80211
evdev 9402 1
thermal 7959 0
battery 6485 0
usb_common 954 1 usbcore
ac 2376 0
button 4502 1 i915
video 11243 1 i915
processor 26144 1
wmi 8475 1 hp_wmi
snd_seq_dummy 1463 0
snd_seq_oss 29016 0
snd_seq_midi_event 5692 1 snd_seq_oss
snd_seq 51137 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5300 3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_timer 19222 2 snd_seq,snd_pcm
snd 59656 15 snd_timer,snd_seq_device,snd_seq,snd_seq_oss,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant
soundcore 6082 1 snd
cuse 5631 0
fuse 68162 4 cuse
nfs 311571 0
nfs_acl 2359 1 nfs
lockd 74176 1 nfs
auth_rpcgss 42223 1 nfs
sunrpc 201789 4 auth_rpcgss,lockd,nfs_acl,nfs
fscache 41123 1 nfs
autofs4 24119 2
ext4 424467 5
crc16 1359 1 ext4
jbd2 71704 1 ext4
mbcache 5977 1 ext4
reiserfs 240101 1
sd_mod 28059 13
ata_piix 22136 0
ahci 20293 8
libahci 19999 1 ahci
libata 167083 3 libahci,ahci,ata_piix
scsi_mod 133422 5 libata,sd_mod,sr_mod,uas,usb_storageLast edited by nomorewindows (2012-06-12 00:23:00)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
Something I was changing with driconf was causing it to go into failsafe mode, but at least was able to mplayer videos with that.
Still no changes in systemd behaviour.
Even running something like stellarium, will cause stellarium to segfault with i915_dri.so
Last edited by nomorewindows (2012-06-12 21:23:07)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
I must've been in between updates. I gave it a reboot back into systemd. I'm still getting some segfaults from gnome-shell-calendar-server, but at least the video is working properly.
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
Did an update today, with a new kernel, rebooted and the problem came back again. Could it be my hardware being intermittent? It's almost like it's having trouble flipping video pages, but something in the segfaulting gnome-calendar-server could be causing the video to be interrupted.
Last edited by nomorewindows (2012-06-24 21:27:27)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline
I had it to where it was running failsafe in gnome, and wouldn't run any faster in kde. Removed .drirc and that seemed to help and also added my user to the video group (but that really didn't seem to be necessary; an old trick). Tried the xf86-video-intel-git from the AUR and now not getting any segfaults in i915_dri.so, and everything running at full speed including kde. KDE seems to act strange with the user being added to the video group; backlighting goes crazy. Somehow got it working again, and my graphics card is described in the gnome system details.
Not exactly sure how I got it working so well, but I'm getting high framerates on stellarium in pekwm!
Last edited by nomorewindows (2012-07-01 22:24:17)
I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.
Offline