You are not logged in.

#1 2012-06-11 18:41:11

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

[possibly solved] i915 doesn't accelerate under gnome with systemd

Is there something I need to add to systemctl to make it have graphics acceleration again?
I already have been able to get xdm.service to work just by copying kdm.service and changing the commandline to xdm, I just can't get the graphics acceleration going under systemd.

Last edited by nomorewindows (2012-06-14 12:25:36)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#2 2012-06-11 19:24:57

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,727

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

No, it all works okay here.  Can you pastebin your /var/log/Xorg.0.log file and provide us a link?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#3 2012-06-11 19:31:17

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

[    27.384] 
X.Org X Server 1.12.2
Release Date: 2012-05-29
[    27.384] X Protocol Version 11, Revision 0
[    27.384] Build Operating System: Linux 3.0.32-1-lts x86_64 
[    27.384] Current Operating System: Linux mopower 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[    27.384] Kernel command line: root=/dev/sda5 ro init=/bin/systemd vga=773 i915.i915_enable_rc6=1
[    27.384] Build Date: 30 May 2012  07:24:13PM
[    27.384]  
[    27.384] Current version of pixman: 0.26.0
[    27.384] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    27.384] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.384] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 13:36:52 2012
[    27.445] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    27.445] (==) No Layout section.  Using the first Screen section.
[    27.445] (==) No screen section available. Using defaults.
[    27.445] (**) |-->Screen "Default Screen Section" (0)
[    27.445] (**) |   |-->Monitor "<default monitor>"
[    27.467] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.467] (==) Automatically adding devices
[    27.467] (==) Automatically enabling devices
[    27.681] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    27.681] 	Entry deleted from font path.
[    27.860] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    27.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.860] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.860] (II) Loader magic: 0x7c58e0
[    27.860] (II) Module ABI versions:
[    27.860] 	X.Org ANSI C Emulation: 0.4
[    27.860] 	X.Org Video Driver: 12.0
[    27.860] 	X.Org XInput driver : 16.0
[    27.860] 	X.Org Server Extension : 6.0
[    27.861] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30a5 rev 3, Mem @ 0xd0200000/524288, 0xc0000000/268435456, 0xd0300000/262144, I/O @ 0x00001800/8
[    27.862] (--) PCI: (0:0:2:1) 8086:27a6:103c:30a5 rev 3, Mem @ 0xd0280000/524288
[    27.862] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    27.862] (II) LoadModule: "extmod"
[    28.034] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.109] (II) Module extmod: vendor="X.Org Foundation"
[    28.109] 	compiled for 1.12.2, module version = 1.0.0
[    28.109] 	Module class: X.Org Server Extension
[    28.109] 	ABI class: X.Org Server Extension, version 6.0
[    28.109] (II) Loading extension MIT-SCREEN-SAVER
[    28.109] (II) Loading extension XFree86-VidModeExtension
[    28.109] (II) Loading extension XFree86-DGA
[    28.109] (II) Loading extension DPMS
[    28.109] (II) Loading extension XVideo
[    28.109] (II) Loading extension XVideo-MotionCompensation
[    28.109] (II) Loading extension X-Resource
[    28.109] (II) LoadModule: "dbe"
[    28.110] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.139] (II) Module dbe: vendor="X.Org Foundation"
[    28.139] 	compiled for 1.12.2, module version = 1.0.0
[    28.139] 	Module class: X.Org Server Extension
[    28.139] 	ABI class: X.Org Server Extension, version 6.0
[    28.139] (II) Loading extension DOUBLE-BUFFER
[    28.139] (II) LoadModule: "glx"
[    28.139] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.211] (II) Module glx: vendor="X.Org Foundation"
[    28.211] 	compiled for 1.12.2, module version = 1.0.0
[    28.211] 	ABI class: X.Org Server Extension, version 6.0
[    28.229] (==) AIGLX enabled
[    28.243] (II) Loading extension GLX
[    28.243] (II) LoadModule: "record"
[    28.243] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    28.299] (II) Module record: vendor="X.Org Foundation"
[    28.299] 	compiled for 1.12.2, module version = 1.13.0
[    28.299] 	Module class: X.Org Server Extension
[    28.300] 	ABI class: X.Org Server Extension, version 6.0
[    28.300] (II) Loading extension RECORD
[    28.300] (II) LoadModule: "dri"
[    28.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.408] (II) Module dri: vendor="X.Org Foundation"
[    28.408] 	compiled for 1.12.2, module version = 1.0.0
[    28.408] 	ABI class: X.Org Server Extension, version 6.0
[    28.408] (II) Loading extension XFree86-DRI
[    28.408] (II) LoadModule: "dri2"
[    28.408] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.442] (II) Module dri2: vendor="X.Org Foundation"
[    28.442] 	compiled for 1.12.2, module version = 1.2.0
[    28.442] 	ABI class: X.Org Server Extension, version 6.0
[    28.442] (II) Loading extension DRI2
[    28.442] (==) Matched intel as autoconfigured driver 0
[    28.442] (==) Matched vesa as autoconfigured driver 1
[    28.442] (==) Matched fbdev as autoconfigured driver 2
[    28.442] (==) Assigned the driver to the xf86ConfigLayout
[    28.442] (II) LoadModule: "intel"
[    28.442] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    28.609] (II) Module intel: vendor="X.Org Foundation"
[    28.609] 	compiled for 1.12.2, module version = 2.19.0
[    28.609] 	Module class: X.Org Video Driver
[    28.609] 	ABI class: X.Org Video Driver, version 12.0
[    28.609] (II) LoadModule: "vesa"
[    28.609] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.633] (II) Module vesa: vendor="X.Org Foundation"
[    28.633] 	compiled for 1.12.0, module version = 2.3.1
[    28.633] 	Module class: X.Org Video Driver
[    28.633] 	ABI class: X.Org Video Driver, version 12.0
[    28.633] (II) LoadModule: "fbdev"
[    28.633] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.648] (II) Module fbdev: vendor="X.Org Foundation"
[    28.648] 	compiled for 1.11.99.903, module version = 0.4.2
[    28.648] 	ABI class: X.Org Video Driver, version 12.0
[    28.648] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    28.648] (II) VESA: driver for VESA chipsets: vesa
[    28.648] (II) FBDEV: driver for framebuffer: fbdev
[    28.648] (--) using VT number 2

[    28.648] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    28.648] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    28.655] (WW) Falling back to old probe method for vesa
[    28.655] (WW) Falling back to old probe method for fbdev
[    28.656] (II) Loading sub module "fbdevhw"
[    28.656] (II) LoadModule: "fbdevhw"
[    28.656] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.675] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.675] 	compiled for 1.12.2, module version = 0.0.2
[    28.675] 	ABI class: X.Org Video Driver, version 12.0
[    28.675] drmOpenDevice: node name is /dev/dri/card0
[    28.675] drmOpenDevice: open result is 10, (OK)
[    28.675] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    28.675] drmOpenDevice: node name is /dev/dri/card0
[    28.675] drmOpenDevice: open result is 10, (OK)
[    28.675] drmOpenByBusid: drmOpenMinor returns 10
[    28.675] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    28.675] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    28.675] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    28.675] (==) intel(0): RGB weight 888
[    28.675] (==) intel(0): Default visual is TrueColor
[    28.675] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[    28.675] (--) intel(0): Chipset: "945GM"
[    28.675] (**) intel(0): Relaxed fencing disabled
[    28.675] (**) intel(0): Wait on SwapBuffers? enabled
[    28.675] (**) intel(0): Triple buffering? enabled
[    28.675] (**) intel(0): Framebuffer tiled
[    28.676] (**) intel(0): Pixmaps tiled
[    28.676] (**) intel(0): 3D buffers tiled
[    28.676] (**) intel(0): SwapBuffers wait enabled
[    28.676] (==) intel(0): video overlay key set to 0x101fe
[    28.676] (II) intel(0): Output LVDS1 has no monitor section
[    28.693] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    28.720] (II) intel(0): Output VGA1 has no monitor section
[    29.034] (II) intel(0): Output TV1 has no monitor section
[    29.034] (II) intel(0): EDID for output LVDS1
[    29.034] (II) intel(0): Manufacturer: QDS  Model: 27  Serial#: 0
[    29.034] (II) intel(0): Year: 2005  Week: 0
[    29.034] (II) intel(0): EDID Version: 1.3
[    29.034] (II) intel(0): Digital Display Input
[    29.034] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    29.034] (II) intel(0): Gamma: 2.20
[    29.034] (II) intel(0): No DPMS capabilities specified
[    29.034] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    29.034] (II) intel(0): First detailed timing is preferred mode
[    29.034] (II) intel(0): redX: 0.575 redY: 0.359   greenX: 0.319 greenY: 0.532
[    29.034] (II) intel(0): blueX: 0.155 blueY: 0.129   whiteX: 0.312 whiteY: 0.328
[    29.034] (II) intel(0): Manufacturer's mask: 0
[    29.034] (II) intel(0): Supported detailed timing:
[    29.034] (II) intel(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
[    29.034] (II) intel(0): h_active: 1280  h_sync: 1301  h_sync_end 1333 h_blank_end 1408 h_border: 0
[    29.034] (II) intel(0): v_active: 800  v_sync: 804  v_sync_end 808 v_blanking: 816 v_border: 0
[    29.034] (II) intel(0): Unknown vendor-specific block f
[    29.034] (II) intel(0):  QUANTADISPLAY
[    29.034] (II) intel(0):  QD15TL024
[    29.034] (II) intel(0): EDID (in hex):
[    29.034] (II) intel(0): 	00ffffffffffff004493270000000000
[    29.034] (II) intel(0): 	000f0103802115780a4dc0935c518827
[    29.034] (II) intel(0): 	21505400000001010101010101010101
[    29.034] (II) intel(0): 	010101010101ea1a0080502010301520
[    29.034] (II) intel(0): 	44004bcf100000180000000f0008002a
[    29.034] (II) intel(0): 	0001000400324a041402000000fe0051
[    29.034] (II) intel(0): 	55414e5441444953504c4159000000fe
[    29.034] (II) intel(0): 	0051443135544c3032340a20202000aa
[    29.034] (II) intel(0): EDID vendor "QDS", prod id 39
[    29.034] (II) intel(0): Printing DDC gathered Modelines:
[    29.034] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[    29.035] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    29.035] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    29.035] (II) intel(0): Printing probed modes for output LVDS1
[    29.035] (II) intel(0): Modeline "1280x800"x60.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[    29.035] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    29.035] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    29.035] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    29.035] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    29.060] (II) intel(0): EDID for output VGA1
[    29.374] (II) intel(0): EDID for output TV1
[    29.374] (II) intel(0): Output LVDS1 connected
[    29.374] (II) intel(0): Output VGA1 disconnected
[    29.374] (II) intel(0): Output TV1 disconnected
[    29.374] (II) intel(0): Using exact sizes for initial modes
[    29.374] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    29.374] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    29.374] (II) intel(0): Kernel page flipping support detected, enabling
[    29.374] (**) intel(0): Display dimensions: (330, 210) mm
[    29.374] (**) intel(0): DPI set to (98, 96)
[    29.374] (II) Loading sub module "fb"
[    29.374] (II) LoadModule: "fb"
[    29.374] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.517] (II) Module fb: vendor="X.Org Foundation"
[    29.517] 	compiled for 1.12.2, module version = 1.0.0
[    29.517] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.517] (II) Loading sub module "dri2"
[    29.517] (II) LoadModule: "dri2"
[    29.518] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    29.518] (II) Module dri2: vendor="X.Org Foundation"
[    29.518] 	compiled for 1.12.2, module version = 1.2.0
[    29.518] 	ABI class: X.Org Server Extension, version 6.0
[    29.518] (II) UnloadModule: "vesa"
[    29.518] (II) Unloading vesa
[    29.518] (II) UnloadModule: "fbdev"
[    29.518] (II) Unloading fbdev
[    29.518] (II) UnloadSubModule: "fbdevhw"
[    29.518] (II) Unloading fbdevhw
[    29.518] (==) Depth 24 pixmap format is 32 bpp
[    29.518] (II) intel(0): [DRI2] Setup complete
[    29.518] (II) intel(0): [DRI2]   DRI driver: i915
[    29.518] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[    29.605] (II) UXA(0): Driver registered support for the following operations:
[    29.605] (II)         solid
[    29.605] (II)         copy
[    29.605] (II)         composite (RENDER acceleration)
[    29.605] (II)         put_image
[    29.605] (II)         get_image
[    29.605] (==) intel(0): Backing store disabled
[    29.605] (==) intel(0): Silken mouse enabled
[    29.605] (II) intel(0): Initializing HW Cursor
[    29.605] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.640] (==) intel(0): DPMS enabled
[    29.640] (==) intel(0): Intel XvMC decoder disabled
[    29.640] (II) intel(0): Set up textured video
[    29.640] (II) intel(0): Set up overlay video
[    29.640] (II) intel(0): direct rendering: DRI2 Enabled
[    29.640] (==) intel(0): hotplug detection: "enabled"
[    29.673] (--) RandR disabled
[    29.673] (II) Initializing built-in extension Generic Event Extension
[    29.673] (II) Initializing built-in extension SHAPE
[    29.673] (II) Initializing built-in extension MIT-SHM
[    29.673] (II) Initializing built-in extension XInputExtension
[    29.673] (II) Initializing built-in extension XTEST
[    29.673] (II) Initializing built-in extension BIG-REQUESTS
[    29.673] (II) Initializing built-in extension SYNC
[    29.673] (II) Initializing built-in extension XKEYBOARD
[    29.673] (II) Initializing built-in extension XC-MISC
[    29.673] (II) Initializing built-in extension SECURITY
[    29.673] (II) Initializing built-in extension XINERAMA
[    29.673] (II) Initializing built-in extension XFIXES
[    29.673] (II) Initializing built-in extension RENDER
[    29.673] (II) Initializing built-in extension RANDR
[    29.673] (II) Initializing built-in extension COMPOSITE
[    29.673] (II) Initializing built-in extension DAMAGE
[    30.511] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.512] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.512] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    30.512] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.512] (II) AIGLX: Loaded and initialized i915
[    30.512] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.512] (II) intel(0): Setting screen physical size to 338 x 211
[    31.570] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    31.570] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.570] (II) LoadModule: "evdev"
[    31.570] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.588] (II) Module evdev: vendor="X.Org Foundation"
[    31.588] 	compiled for 1.12.0, module version = 2.7.0
[    31.588] 	Module class: X.Org XInput Driver
[    31.588] 	ABI class: X.Org XInput driver, version 16.0
[    31.588] (II) Using input driver 'evdev' for 'Power Button'
[    31.588] (**) Power Button: always reports core events
[    31.588] (**) evdev: Power Button: Device: "/dev/input/event3"
[    31.588] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.588] (--) evdev: Power Button: Found keys
[    31.588] (II) evdev: Power Button: Configuring as keyboard
[    31.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    31.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.589] (**) Option "xkb_rules" "evdev"
[    31.589] (**) Option "xkb_model" "evdev"
[    31.589] (**) Option "xkb_layout" "us"
[    31.622] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    31.622] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.623] (II) Using input driver 'evdev' for 'Video Bus'
[    31.623] (**) Video Bus: always reports core events
[    31.623] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    31.623] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.623] (--) evdev: Video Bus: Found keys
[    31.623] (II) evdev: Video Bus: Configuring as keyboard
[    31.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event5"
[    31.623] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.623] (**) Option "xkb_rules" "evdev"
[    31.623] (**) Option "xkb_model" "evdev"
[    31.623] (**) Option "xkb_layout" "us"
[    31.623] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.623] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.623] (II) Using input driver 'evdev' for 'Power Button'
[    31.624] (**) Power Button: always reports core events
[    31.624] (**) evdev: Power Button: Device: "/dev/input/event2"
[    31.624] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.624] (--) evdev: Power Button: Found keys
[    31.624] (II) evdev: Power Button: Configuring as keyboard
[    31.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    31.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    31.624] (**) Option "xkb_rules" "evdev"
[    31.624] (**) Option "xkb_model" "evdev"
[    31.624] (**) Option "xkb_layout" "us"
[    31.624] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    31.624] (II) No input driver specified, ignoring this device.
[    31.624] (II) This device may have been added with another device file.
[    31.625] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    31.625] (II) No input driver specified, ignoring this device.
[    31.625] (II) This device may have been added with another device file.
[    31.625] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    31.625] (II) No input driver specified, ignoring this device.
[    31.625] (II) This device may have been added with another device file.
[    31.626] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    31.626] (II) No input driver specified, ignoring this device.
[    31.626] (II) This device may have been added with another device file.
[    31.626] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    31.626] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.626] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.626] (**) AT Translated Set 2 keyboard: always reports core events
[    31.626] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    31.626] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.626] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.626] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.626] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.626] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    31.626] (**) Option "xkb_rules" "evdev"
[    31.626] (**) Option "xkb_model" "evdev"
[    31.626] (**) Option "xkb_layout" "us"
[    31.627] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[    31.627] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.627] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.627] (II) LoadModule: "synaptics"
[    31.627] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.690] (II) Module synaptics: vendor="X.Org Foundation"
[    31.690] 	compiled for 1.12.1, module version = 1.6.1
[    31.690] 	Module class: X.Org XInput Driver
[    31.690] 	ABI class: X.Org XInput driver, version 16.0
[    31.690] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.690] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.690] (**) Option "Device" "/dev/input/event10"
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.693] (**) Option "TapButton1" "1"
[    31.693] (**) Option "TapButton2" "2"
[    31.693] (**) Option "TapButton3" "3"
[    31.693] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.693] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.693] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event10"
[    31.693] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.693] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.694] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.694] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.694] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.694] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    31.694] (II) No input driver specified, ignoring this device.
[    31.694] (II) This device may have been added with another device file.
[    31.695] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    31.695] (II) No input driver specified, ignoring this device.
[    31.695] (II) This device may have been added with another device file.
[    31.695] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    31.695] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    31.695] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    31.696] (**) HP WMI hotkeys: always reports core events
[    31.696] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[    31.696] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    31.696] (--) evdev: HP WMI hotkeys: Found keys
[    31.696] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    31.696] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[    31.696] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    31.696] (**) Option "xkb_rules" "evdev"
[    31.696] (**) Option "xkb_model" "evdev"
[    31.696] (**) Option "xkb_layout" "us"
[    44.181] (II) intel(0): EDID vendor "QDS", prod id 39
[    44.181] (II) intel(0): Printing DDC gathered Modelines:
[    44.181] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[    51.024] (II) intel(0): EDID vendor "QDS", prod id 39
[    51.024] (II) intel(0): Printing DDC gathered Modelines:
[    51.024] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[    54.244] (II) intel(0): EDID vendor "QDS", prod id 39
[    54.244] (II) intel(0): Printing DDC gathered Modelines:
[    54.245] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[   175.028] (II) intel(0): EDID vendor "QDS", prod id 39
[   175.028] (II) intel(0): Printing DDC gathered Modelines:
[   175.028] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[   331.983] (II) AIGLX: Suspending AIGLX clients for VT switch
[   635.685] (II) AIGLX: Resuming AIGLX clients after VT switch
[   635.690] (II) intel(0): EDID vendor "QDS", prod id 39
[   635.690] (II) intel(0): Printing DDC gathered Modelines:
[   635.690] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[   636.030] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1191.920] (II) evdev: Power Button: Close
[  1191.920] (II) UnloadModule: "evdev"
[  1191.943] (II) evdev: Video Bus: Close
[  1191.943] (II) UnloadModule: "evdev"
[  1191.950] (II) evdev: Power Button: Close
[  1191.950] (II) UnloadModule: "evdev"
[  1191.986] (II) evdev: AT Translated Set 2 keyboard: Close
[  1191.987] (II) UnloadModule: "evdev"
[  1192.013] (II) UnloadModule: "synaptics"
[  1192.020] (II) evdev: HP WMI hotkeys: Close
[  1192.020] (II) UnloadModule: "evdev"
[  1192.025] 6 XSELINUXs still allocated at reset
[  1192.025] SCREEN: 0 objects of 272 bytes = 0 total bytes 0 private allocs
[  1192.025] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[  1192.025] CLIENT: 0 objects of 208 bytes = 0 total bytes 0 private allocs
[  1192.025] WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[  1192.025] PIXMAP: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[  1192.025] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[  1192.025] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[  1192.025] GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] TOTAL: 0 objects, 0 bytes, 0 allocs
[  1192.025] 6 SELECTIONs still allocated at reset
[  1192.025] WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[  1192.025] PIXMAP: 0 objects of 32 bytes = 0 total bytes 0 private allocs
[  1192.025] GC: 0 objects of 56 bytes = 0 total bytes 0 private allocs
[  1192.025] CURSOR: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] CURSOR_BITS: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[  1192.025] GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[  1192.025] TOTAL: 0 objects, 0 bytes, 0 allocs
[  1192.027] (II) intel(0): [DRI2] Setup complete
[  1192.027] (II) intel(0): [DRI2]   DRI driver: i915
[  1192.027] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[  1192.027] (II) UXA(0): Driver registered support for the following operations:
[  1192.027] (II)         solid
[  1192.027] (II)         copy
[  1192.027] (II)         composite (RENDER acceleration)
[  1192.027] (II)         put_image
[  1192.027] (II)         get_image
[  1192.027] (II) intel(0): Initializing HW Cursor
[  1192.027] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1192.070] (==) intel(0): DPMS enabled
[  1192.070] (==) intel(0): Intel XvMC decoder disabled
[  1192.070] (II) intel(0): Set up textured video
[  1192.070] (II) intel(0): Set up overlay video
[  1192.070] (II) intel(0): direct rendering: DRI2 Enabled
[  1192.070] (==) intel(0): hotplug detection: "enabled"
[  1192.093] (--) RandR disabled
[  1192.103] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1192.103] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1192.103] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1192.103] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1192.103] (II) AIGLX: Loaded and initialized i915
[  1192.103] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1192.104] (II) intel(0): Setting screen physical size to 338 x 211
[  1192.239] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1192.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1192.239] (II) Using input driver 'evdev' for 'Power Button'
[  1192.239] (**) Power Button: always reports core events
[  1192.239] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1192.240] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1192.240] (--) evdev: Power Button: Found keys
[  1192.240] (II) evdev: Power Button: Configuring as keyboard
[  1192.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  1192.240] (**) Option "xkb_rules" "evdev"
[  1192.240] (**) Option "xkb_model" "evdev"
[  1192.240] (**) Option "xkb_layout" "us"
[  1192.273] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  1192.273] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1192.273] (II) Using input driver 'evdev' for 'Video Bus'
[  1192.273] (**) Video Bus: always reports core events
[  1192.273] (**) evdev: Video Bus: Device: "/dev/input/event5"
[  1192.273] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1192.273] (--) evdev: Video Bus: Found keys
[  1192.273] (II) evdev: Video Bus: Configuring as keyboard
[  1192.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event5"
[  1192.274] (**) Option "xkb_rules" "evdev"
[  1192.274] (**) Option "xkb_model" "evdev"
[  1192.274] (**) Option "xkb_layout" "us"
[  1192.274] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1192.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1192.274] (II) Using input driver 'evdev' for 'Power Button'
[  1192.274] (**) Power Button: always reports core events
[  1192.274] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1192.274] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1192.274] (--) evdev: Power Button: Found keys
[  1192.274] (II) evdev: Power Button: Configuring as keyboard
[  1192.274] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[  1192.274] (**) Option "xkb_rules" "evdev"
[  1192.274] (**) Option "xkb_model" "evdev"
[  1192.274] (**) Option "xkb_layout" "us"
[  1192.275] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1192.275] (II) No input driver specified, ignoring this device.
[  1192.275] (II) This device may have been added with another device file.
[  1192.276] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[  1192.276] (II) No input driver specified, ignoring this device.
[  1192.276] (II) This device may have been added with another device file.
[  1192.276] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[  1192.276] (II) No input driver specified, ignoring this device.
[  1192.276] (II) This device may have been added with another device file.
[  1192.276] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[  1192.276] (II) No input driver specified, ignoring this device.
[  1192.276] (II) This device may have been added with another device file.
[  1192.277] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1192.277] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1192.277] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1192.277] (**) AT Translated Set 2 keyboard: always reports core events
[  1192.277] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1192.277] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1192.277] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1192.277] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1192.277] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1192.277] (**) Option "xkb_rules" "evdev"
[  1192.277] (**) Option "xkb_model" "evdev"
[  1192.277] (**) Option "xkb_layout" "us"
[  1192.278] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[  1192.278] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1192.278] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1192.278] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1192.278] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1192.278] (**) Option "Device" "/dev/input/event10"
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1192.280] (**) Option "TapButton1" "1"
[  1192.280] (**) Option "TapButton2" "2"
[  1192.280] (**) Option "TapButton3" "3"
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1192.280] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1192.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event10"
[  1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  1192.280] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[  1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1192.280] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1192.280] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1192.281] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1192.281] (II) No input driver specified, ignoring this device.
[  1192.281] (II) This device may have been added with another device file.
[  1192.281] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  1192.281] (II) No input driver specified, ignoring this device.
[  1192.281] (II) This device may have been added with another device file.
[  1192.282] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[  1192.282] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1192.282] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[  1192.282] (**) HP WMI hotkeys: always reports core events
[  1192.282] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[  1192.282] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[  1192.282] (--) evdev: HP WMI hotkeys: Found keys
[  1192.282] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[  1192.282] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[  1192.282] (**) Option "xkb_rules" "evdev"
[  1192.282] (**) Option "xkb_model" "evdev"
[  1192.282] (**) Option "xkb_layout" "us"
[  1210.886] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2946.547] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2946.559] (II) intel(0): EDID vendor "QDS", prod id 39
[  2946.560] (II) intel(0): Printing DDC gathered Modelines:
[  2946.560] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[  2946.896] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2950.573] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2951.164] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2951.183] (II) intel(0): EDID vendor "QDS", prod id 39
[  2951.183] (II) intel(0): Printing DDC gathered Modelines:
[  2951.183] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[  2951.515] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2952.533] (II) AIGLX: Suspending AIGLX clients for VT switch
[  3126.154] (II) AIGLX: Resuming AIGLX clients after VT switch
[  3126.166] (II) intel(0): EDID vendor "QDS", prod id 39
[  3126.166] (II) intel(0): Printing DDC gathered Modelines:
[  3126.166] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[  3126.503] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  3128.789] (II) intel(0): EDID vendor "QDS", prod id 39
[  3128.789] (II) intel(0): Printing DDC gathered Modelines:
[  3128.789] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[  3129.717] (II) intel(0): EDID vendor "QDS", prod id 39
[  3129.717] (II) intel(0): Printing DDC gathered Modelines:
[  3129.717] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)
[  3131.550] (II) intel(0): EDID vendor "QDS", prod id 39
[  3131.550] (II) intel(0): Printing DDC gathered Modelines:
[  3131.550] (II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz eP)

I don't see anything unusual?
This line might be interesting:

[    28.648] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    28.648] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    28.655] (WW) Falling back to old probe method for vesa
[    28.655] (WW) Falling back to old probe method for fbdev

Last edited by nomorewindows (2012-06-11 19:38:47)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#4 2012-06-11 19:49:23

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,727

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

I don't know, it looks to me like acceleration should be working (DRI2 is enabled)
What is your indication there is a problem?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#5 2012-06-11 19:52:53

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

ewaller wrote:

I don't know, it looks to me like acceleration should be working (DRI2 is enabled)
What is your indication there is a problem?

The graphics are choppy, and framerates are awfully slow as if I was using something like pekwm that doesn't use the acceleration.
Makes using gnome cumbersome.
When I go back to init, it works fine.
When I start gnome as root, the framerates are what they would be for full acceleration.
Mplayer videos lag slightly behind the audio.

Last edited by nomorewindows (2012-06-11 20:04:12)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#6 2012-06-11 21:52:16

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,727

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

Can I suggest you diff the output of lsmod when using initscripts vs when using systemd? 

Is it possible there is something consuming CPU time in systemd?  Have you looked at the processor load with a tool like htop?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#7 2012-06-11 22:16:15

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

Reinstalled gnome-shell.
Have restarted under initscripts with gnome-session-check-accelerated(-helper) (gnome-session) is now segfaulting along with glxinfo but this time it is saying error 4 with i915_dri.so (intel-dri).  Have reinstalled intel-dri, still with failsafe mode, something is broken after reinstalling gnome-shell or rebooting. 
Getting failsafe graphics mode on gnome, which means the accel is off now, and realized by gnome. 
Now intensive processes were found under top or htop.

lsmod_initscripts:

Module                  Size  Used by
nfsd                  260316  2 
xfs                   735087  1 
exportfs                3665  2 xfs,nfsd
usb_storage            44594  0 
uas                     8026  0 
arc4                    1410  2 
b43                   347913  0 
bcma                   21810  1 b43
mac80211              391455  1 b43
cfg80211              176857  2 mac80211,b43
ssb                    48216  1 b43
joydev                  9991  0 
pcmcia                 36073  2 ssb,b43
sr_mod                 14823  0 
cdrom                  35744  1 sr_mod
i915                  432558  2 
i2c_algo_bit            5359  1 i915
drm_kms_helper         26947  1 i915
drm                   204375  3 drm_kms_helper,i915
i2c_i801                8116  0 
i2c_core               20593  5 i2c_i801,drm,drm_kms_helper,i2c_algo_bit,i915
snd_hda_codec_conexant    47100  1 
snd_hda_intel          24021  0 
hp_wmi                  7802  0 
snd_hda_codec          92713  2 snd_hda_intel,snd_hda_codec_conexant
snd_hwdep               6556  1 snd_hda_codec
intel_agp              10872  1 i915
8139too                20456  0 
iTCO_wdt               12877  0 
8139cp                 19567  0 
sparse_keymap           3056  1 hp_wmi
rfkill                 15604  2 hp_wmi,cfg80211
pcspkr                  1835  0 
iTCO_vendor_support     1929  1 iTCO_wdt
mii                     4091  2 8139cp,8139too
intel_gtt              14007  3 intel_agp,i915
uhci_hcd               23404  0 
wmi                     8475  1 hp_wmi
mmc_core               82735  2 ssb,b43
ehci_hcd               44136  0 
snd_pcm                74812  2 snd_hda_codec,snd_hda_intel
serio_raw               4653  0 
psmouse                69539  0 
battery                 6485  0 
video                  11243  1 i915
snd_page_alloc          7217  2 snd_pcm,snd_hda_intel
usbcore               147077  5 ehci_hcd,uhci_hcd,uas,usb_storage
thermal                 7959  0 
ac                      2376  0 
pcmcia_core            12189  1 pcmcia
usb_common               954  1 usbcore
evdev                   9402  0 
button                  4502  1 i915
processor              26144  1 
snd_seq_dummy           1463  0 
snd_seq_oss            29016  0 
snd_seq_midi_event      5692  1 snd_seq_oss
snd_seq                51137  5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device          5300  3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_timer              19222  2 snd_seq,snd_pcm
snd                    59656  9 snd_timer,snd_seq_device,snd_seq,snd_seq_oss,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant
soundcore               6082  1 snd
cuse                    5631  0 
fuse                   68162  1 cuse
nfs                   311571  0 
nfs_acl                 2359  2 nfs,nfsd
lockd                  74176  2 nfs,nfsd
auth_rpcgss            42223  2 nfs,nfsd
sunrpc                201789  6 auth_rpcgss,lockd,nfs_acl,nfs,nfsd
fscache                41123  1 nfs
ext4                  424467  5 
crc16                   1359  1 ext4
jbd2                   71704  1 ext4
mbcache                 5977  1 ext4
reiserfs              240101  1 
sd_mod                 28059  9 
ata_piix               22136  0 
ahci                   20293  8 
libahci                19999  1 ahci
libata                167083  3 libahci,ahci,ata_piix
scsi_mod              133422  5 libata,sd_mod,sr_mod,uas,usb_storage

lsmod_systemd:

Module                  Size  Used by
nls_cp437               5953  2 
vfat                   10183  2 
fat                    49739  1 vfat
xfs                   735087  1 
exportfs                3665  1 xfs
usb_storage            44594  2 
uas                     8026  0 
arc4                    1410  2 
b43                   347913  0 
joydev                  9991  0 
bcma                   21810  1 b43
mac80211              391455  1 b43
snd_hda_codec_conexant    47100  1 
i915                  432558  2 
i2c_algo_bit            5359  1 i915
cfg80211              176857  2 mac80211,b43
drm_kms_helper         26947  1 i915
snd_hda_intel          24021  3 
iTCO_wdt               12877  0 
drm                   204375  3 drm_kms_helper,i915
snd_hda_codec          92713  2 snd_hda_intel,snd_hda_codec_conexant
sr_mod                 14823  0 
iTCO_vendor_support     1929  1 iTCO_wdt
cdrom                  35744  1 sr_mod
ssb                    48216  1 b43
hp_wmi                  7802  0 
pcmcia                 36073  2 ssb,b43
intel_agp              10872  1 i915
i2c_i801                8116  0 
i2c_core               20593  5 i2c_i801,drm,drm_kms_helper,i2c_algo_bit,i915
8139too                20456  0 
8139cp                 19567  0 
mii                     4091  2 8139cp,8139too
snd_hwdep               6556  1 snd_hda_codec
snd_pcm                74812  2 snd_hda_codec,snd_hda_intel
mmc_core               82735  2 ssb,b43
intel_gtt              14007  3 intel_agp,i915
sparse_keymap           3056  1 hp_wmi
uhci_hcd               23404  0 
ehci_hcd               44136  0 
serio_raw               4653  0 
psmouse                69539  0 
usbcore               147077  5 ehci_hcd,uhci_hcd,uas,usb_storage
snd_page_alloc          7217  2 snd_pcm,snd_hda_intel
pcmcia_core            12189  1 pcmcia
pcspkr                  1835  0 
rfkill                 15604  4 hp_wmi,cfg80211
evdev                   9402  1 
thermal                 7959  0 
battery                 6485  0 
usb_common               954  1 usbcore
ac                      2376  0 
button                  4502  1 i915
video                  11243  1 i915
processor              26144  1 
wmi                     8475  1 hp_wmi
snd_seq_dummy           1463  0 
snd_seq_oss            29016  0 
snd_seq_midi_event      5692  1 snd_seq_oss
snd_seq                51137  5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device          5300  3 snd_seq,snd_seq_oss,snd_seq_dummy
snd_timer              19222  2 snd_seq,snd_pcm
snd                    59656  15 snd_timer,snd_seq_device,snd_seq,snd_seq_oss,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant
soundcore               6082  1 snd
cuse                    5631  0 
fuse                   68162  4 cuse
nfs                   311571  0 
nfs_acl                 2359  1 nfs
lockd                  74176  1 nfs
auth_rpcgss            42223  1 nfs
sunrpc                201789  4 auth_rpcgss,lockd,nfs_acl,nfs
fscache                41123  1 nfs
autofs4                24119  2 
ext4                  424467  5 
crc16                   1359  1 ext4
jbd2                   71704  1 ext4
mbcache                 5977  1 ext4
reiserfs              240101  1 
sd_mod                 28059  13 
ata_piix               22136  0 
ahci                   20293  8 
libahci                19999  1 ahci
libata                167083  3 libahci,ahci,ata_piix
scsi_mod              133422  5 libata,sd_mod,sr_mod,uas,usb_storage

Last edited by nomorewindows (2012-06-12 00:23:00)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#8 2012-06-12 01:13:18

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

Something I was changing with driconf was causing it to go into failsafe mode, but at least was able to mplayer videos with that.
Still no changes in systemd behaviour.
Even running something like stellarium, will cause stellarium to segfault with i915_dri.so

Last edited by nomorewindows (2012-06-12 21:23:07)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#9 2012-06-14 12:25:09

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

I must've been in between updates.  I gave it a reboot back into systemd.  I'm still getting some segfaults from gnome-shell-calendar-server, but at least the video is working properly.


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#10 2012-06-24 21:24:30

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

Did an update today, with a new kernel, rebooted and the problem came back again.  Could it be my hardware being intermittent?  It's almost like it's having trouble flipping video pages, but something in the segfaulting gnome-calendar-server could be causing the video to be interrupted.

Last edited by nomorewindows (2012-06-24 21:27:27)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#11 2012-07-01 22:04:20

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: [possibly solved] i915 doesn't accelerate under gnome with systemd

I had it to where it was running failsafe in gnome, and wouldn't run any faster in kde.  Removed .drirc and that seemed to help and also added my user to the video group (but that really didn't seem to be necessary; an old trick).  Tried the xf86-video-intel-git from the AUR and now not getting any segfaults in i915_dri.so, and everything running at full speed including kde.  KDE seems to act strange with the user being added to the video group; backlighting goes crazy.  Somehow got it working again, and my graphics card is described in the gnome system details.
Not exactly sure how I got it working so well, but I'm getting high framerates on stellarium in pekwm!

Last edited by nomorewindows (2012-07-01 22:24:17)


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

Board footer

Powered by FluxBB