You are not logged in.
Pages: 1
Ok, went to do an upgrade earlier, but it went wrong. At first, I started with a plain pacman -Syu, and it advised me to upgrade pacman itself first, which I told it to do.
[root@blackstar bonzodog]# pacman -Syu
:: Synchronising package databases...
testing 177.0 KiB 761K/s 00:00 [-----------------------------------------------------------------------------------] 100%
multilib-testing 29.0 B 301K/s 00:00 [-----------------------------------------------------------------------------------] 100%
multilib 91.4 KiB 842K/s 00:00 [-----------------------------------------------------------------------------------] 100%
core 107.5 KiB 951K/s 00:00 [-----------------------------------------------------------------------------------] 100%
extra 1410.1 KiB 2.43M/s 00:01 [-----------------------------------------------------------------------------------] 100%
community-testing 9.7 KiB 785K/s 00:00 [-----------------------------------------------------------------------------------] 100%
community 1752.1 KiB 2.54M/s 00:01 [-----------------------------------------------------------------------------------] 100%
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] Y
resolving dependencies...
looking for inter-conflicts...
Targets (1): pacman-4.0.3-3
Total Download Size: 0.50 MiB
Total Installed Size: 3.54 MiB
Net Upgrade Size: 0.27 MiB
Proceed with installation? [Y/n] Y
:: Retrieving packages from core...
pacman-4.0.3-3-x86_64 508.6 KiB 1728K/s 00:00 [-----------------------------------------------------------------------------------] 100%
(1/1) checking package integrity [-----------------------------------------------------------------------------------] 100%
(1/1) loading package files [-----------------------------------------------------------------------------------] 100%
(1/1) checking for file conflicts [-----------------------------------------------------------------------------------] 100%
(1/1) checking available disk space [-----------------------------------------------------------------------------------] 100%
(1/1) upgrading pacman [-----------------------------------------------------------------------------------] 100%
ok, so we got this far, no real problems to show.
I then proceeded to continue the update:
[root@blackstar bonzodog]# pacman -Syu
:: Synchronising package databases...
testing is up to date
multilib-testing is up to date
multilib is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
:: Starting full system upgrade...
:: Replace pyxdg with extra/python2-xdg? [Y/n] Y
resolving dependencies...
looking for inter-conflicts...
Targets (146): alsa-plugins-1.0.25-2 audacious-3.3-1 audacious-plugins-3.3-1 automake-1.12.2-1 bash-4.2.037-1 binutils-multilib-2.22-8 bison-2.6.1-1 chromium-21.0.1180.57-1 cifs-utils-5.6-1 cogl-1.10.4-1
coreutils-8.17-3 cryptsetup-1.5.0-1 curl-7.27.0-1 dbus-1.6.4-1 dbus-core-1.6.4-1 device-mapper-2.02.96-3 dhclient-4.2.4.1-1 dhcpcd-5.6.0-1 dialog-1.1_20120706-1 dnsutils-9.9.1.P2-1 dri2proto-2.8-1
e2fsprogs-1.42.5-1 elfutils-0.154-1 ffmpeg-1:0.11.1-1 ffmpegthumbnailer-2.0.7-5 filesystem-2012.7-1 finch-2.10.6-1 firefox-14.0.1-1 flex-2.5.36-1 gcc-4.7.1-5 gcc-libs-4.7.1-5 gegl-0.2.0-2
git-1.7.11.4-1 glew-1.8.0-1 glib2-2.32.4-1 glibc-2.16.0-2 glibmm-2.32.1-1 glproto-1.4.16-1 gnutls-3.0.21-2 gpm-1.20.6-10 grep-2.13-2 gstreamer0.10-ugly-0.10.19-2 gstreamer0.10-ugly-plugins-0.10.19-2
gtk-update-icon-cache-2.24.11-2 gtk2-2.24.11-2 gtk3-3.4.4-1 gvfs-1.12.3-3 hwids-20120711-1 iana-etc-2.30-3 icu-49.1.2-2 initscripts-2012.07.5-1 iputils-20101006-4 kbd-1.15.3-3 khrplatform-devel-8.0.4-2
kmod-9-2 krb5-1.10.2-3 lib32-dbus-core-1.6.4-1 lib32-e2fsprogs-1.42.4-1 lib32-gcc-libs-4.7.1-5 lib32-glib2-2.32.4-1 lib32-glibc-2.16.0-2 lib32-gnutls-3.0.21-1 lib32-gtk2-2.24.11-1 lib32-libcups-1.6.1-1
lib32-libgl-8.0.4-4 lib32-libglapi-8.0.4-4 lib32-libjpeg-turbo-1.2.1-1 lib32-libpng-1.5.12-1 lib32-nettle-2.5-1 lib32-pcre-8.31-1 lib32-pixman-0.26.2-1 lib32-qt-4.8.2-2 lib32-readline-6.2.004-1
libburn-1.2.4-1 libcups-1.6.1-1 libegl-8.0.4-2 libgl-8.0.4-2 libglapi-8.0.4-2 libimobiledevice-1.1.4-1 libisofs-1.2.4-1 libjpeg-turbo-1.2.1-1 libldap-2.4.32-1 libmp4v2-2.0.0-2 libmysqlclient-5.5.25.a-1
libpng-1.5.12-1 libpulse-2.1-1 libpurple-2.10.6-1 libsystemd-187-4 libthai-0.1.18-1 libtracker-sparql-0.14.2-1 libusb-compat-0.1.4-2 libxrandr-1.4.0-1 linux-3.5-2 linux-api-headers-3.4.6-1
lirc-utils-1:0.9.0-25 lvm2-2.02.96-3 mc-4.8.4-1 mesa-8.0.4-2 mkinitcpio-0.10-1 mpfr-3.1.1-1 mpg123-1.14.4-1 mplayer-35014-1 nettle-2.5-1 nspr-4.9.2-1 oxygen-icons-svg-4.9.0-1 pcmanfm-0.9.10-3
pcre-8.31-1 perl-error-0.17018-1 perl-xml-simple-2.20-1 pidgin-2.10.6-1 pkg-config-0.27-1 poppler-0.20.2-1 poppler-glib-0.20.2-1 procps-ng-3.3.3-3 python-urwid-1.0.2-1 python2-urwid-1.0.2-1
python2-xdg-0.23-1 pyxdg-0.19-3 [removal] qt-4.8.2-3 randrproto-1.4.0-1 readline-6.2.004-1 skype-4.0.0.8-1 slim-1.3.4-2 sox-14.4.0-3 syslog-ng-3.3.5-2 systemd-tools-187-4 taglib-1.7.2-2
transmission-gtk-2.61-1 ttf-liberation-2.00.0-1 tzdata-2012d-1 unetbootin-578-1 upower-0.9.17-2 usbmuxd-1.0.8-1 usbutils-006-1 util-linux-2.21.2-5 x264-20120705-1 xf86-input-evdev-2.7.1-1
xf86-video-dummy-0.3.6-1 xf86-video-fbdev-0.4.3-1 xf86-video-sisusb-0.9.6-1 xf86-video-vesa-2.3.2-1 xorg-server-1.12.3-1 xorg-server-common-1.12.3-1 xorg-server-devel-1.12.3-1 xulrunner-14.0.1-1
zsh-5.0.0-2
Total Download Size: 533.21 MiB
Total Installed Size: 1475.24 MiB
Net Upgrade Size: 17.46 MiB
Proceed with installation? [Y/n] Y
:: Retrieving packages from testing...
<list snipped>
:: Retrieving packages from multilib...
<list snipped>
:: Retrieving packages from core...
<list snipped>
:: Retrieving packages from extra...
<list snipped>
:: Retrieving packages from community...
<list snipped>
(145/145) checking package integrity [-----------------------------------------------------------------------------------] 100%
(145/145) loading package files [-----------------------------------------------------------------------------------] 100%
(145/145) checking for file conflicts [-----------------------------------------------------------------------------------] 100%
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
Errors occurred, no packages were upgraded.
Ok, so I had already read that this could happen, so followed the advice given:
[root@blackstar bonzodog]# pacman -Syu --ignore glibc
:: Synchronising package databases...
testing is up to date
multilib-testing is up to date
multilib is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
:: Starting full system upgrade...
warning: glibc: ignoring package upgrade (2.15-12 => 2.16.0-2)
warning: cannot resolve "glibc>=2.16", a dependency of "gcc-libs"
<This went on for about 30 lines>
:: Replace pyxdg with extra/python2-xdg? [Y/n] Y
resolving dependencies...
warning: ignoring package glibc-2.16.0-2
warning: cannot resolve "glibc>=2.16", a dependency of "gcc-libs"
:: The following packages cannot be upgraded due to unresolvable dependencies:
audacious binutils-multilib chromium cryptsetup dbus dbus-core device-mapper elfutils ffmpeg ffmpegthumbnailer firefox gcc gcc-libs gegl git glew glib2 glibmm gnutls grep gtk2 gtk3 icu initscripts lib32-dbus-core lib32-gcc-libs lib32-glib2 lib32-gnutls lib32-gtk2 lib32-libcups lib32-libgl lib32-pcre lib32-qt libcups libegl libgl libimobiledevice libmp4v2 libpulse libtracker-sparql linux lvm2 mc mesa mkinitcpio mplayer pcmanfm pcre pkg-config poppler poppler-glib qt skype syslog-ng systemd-tools taglib transmission-gtk unetbootin upower xorg-server xulrunner zsh
Do you want to skip the above packages for this upgrade? [y/N] y
looking for inter-conflicts...
Targets (83): alsa-plugins-1.0.25-2 audacious-plugins-3.3-1 automake-1.12.2-1 bash-4.2.037-1 bison-2.6.1-1 cifs-utils-5.6-1 cogl-1.10.4-1 coreutils-8.17-3 curl-7.27.0-1 dhclient-4.2.4.1-1 dhcpcd-5.6.0-1
dialog-1.1_20120706-1 dnsutils-9.9.1.P2-1 dri2proto-2.8-1 e2fsprogs-1.42.5-1 filesystem-2012.7-1 finch-2.10.6-1 flex-2.5.36-1 glproto-1.4.16-1 gpm-1.20.6-10 gstreamer0.10-ugly-0.10.19-2
gstreamer0.10-ugly-plugins-0.10.19-2 gtk-update-icon-cache-2.24.11-2 gvfs-1.12.3-3 hwids-20120711-1 iana-etc-2.30-3 iputils-20101006-4 kbd-1.15.3-3 khrplatform-devel-8.0.4-2 kmod-9-2 krb5-1.10.2-3
lib32-e2fsprogs-1.42.4-1 lib32-glibc-2.16.0-2 lib32-libglapi-8.0.4-4 lib32-libjpeg-turbo-1.2.1-1 lib32-libpng-1.5.12-1 lib32-nettle-2.5-1 lib32-pixman-0.26.2-1 lib32-readline-6.2.004-1 libburn-1.2.4-1
libglapi-8.0.4-2 libisofs-1.2.4-1 libjpeg-turbo-1.2.1-1 libldap-2.4.32-1 libmysqlclient-5.5.25.a-1 libpng-1.5.12-1 libpurple-2.10.6-1 libsystemd-187-4 libthai-0.1.18-1 libusb-compat-0.1.4-2
libxrandr-1.4.0-1 linux-api-headers-3.4.6-1 lirc-utils-1:0.9.0-25 mpfr-3.1.1-1 mpg123-1.14.4-1 nettle-2.5-1 nspr-4.9.2-1 oxygen-icons-svg-4.9.0-1 perl-error-0.17018-1 perl-xml-simple-2.20-1
pidgin-2.10.6-1 procps-ng-3.3.3-3 python-urwid-1.0.2-1 python2-urwid-1.0.2-1 python2-xdg-0.23-1 pyxdg-0.19-3 [removal] randrproto-1.4.0-1 readline-6.2.004-1 slim-1.3.4-2 sox-14.4.0-3
ttf-liberation-2.00.0-1 tzdata-2012d-1 usbmuxd-1.0.8-1 usbutils-006-1 util-linux-2.21.2-5 x264-20120705-1 xf86-input-evdev-2.7.1-1 xf86-video-dummy-0.3.6-1 xf86-video-fbdev-0.4.3-1
xf86-video-sisusb-0.9.6-1 xf86-video-vesa-2.3.2-1 xorg-server-common-1.12.3-1 xorg-server-devel-1.12.3-1
Total Installed Size: 541.44 MiB
Net Upgrade Size: 9.59 MiB
Proceed with installation? [Y/n] Y
So, I skipped the above packages as advised in the developer usrlib wiki. It proceeded as normal to download and install the remaining packages.
I then followed its advice further, and proceeded with the following command:
[root@blackstar bonzodog]# pacman -Sd audacious binutils-multilib chromium cryptsetup dbus dbus-core device-mapper elfutils ffmpeg ffmpegthumbnailer firefox gcc gcc-libs gegl git glew glib2 glibmm gnutls grep gtk2 gtk3 icu initscripts lib32-dbus-core lib32-gcc-libs lib32-glib2 lib32-gnutls lib32-gtk2 lib32-libcups lib32-libgl lib32-pcre lib32-qt libcups libegl libgl libimobiledevice libmp4v2 libpulse libtracker-sparql linux lvm2 mc mesa mkinitcpio mplayer pcmanfm pcre pkg-config poppler poppler-glib qt skype syslog-ng systemd-tools taglib transmission-gtk unetbootin upower xorg-server xulrunner zsh
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libcurl.so.4)
Thats when the error above occured.
I then tried to manually download the GLibc package as advised by allen.
[root@blackstar bonzodog]# pacman -U http://pkgbuild.com/~allan/glibc-2.16.0-1-x86_64.pkg.tar.xz
pacman: /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libcurl.so.4)
A complete fail, as you can see.
I then fetched the above file with wget, and I am now stuck as to where I proceed with this. Any ideas as to what to do?
Offline
Others with a similar problem https://bbs.archlinux.org/viewtopic.php?id=146308.
aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies
Offline
I then fetched the above file with wget, and I am now stuck as to where I proceed with this. Any ideas as to what to do?
Install it with pacman -U /local/path/pkg.tar.xz
| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |
Offline
Pages: 1