faill boot

iambig · 2012-08-24 07:12:16

hi,
i recently installed arch on my desktop
my configuration is:
mb asus m4a89gtd pro usb3
cpu amd 1055t x6
gpu igp ati hd4290
4gb ram ddr3 1333mhz
hd 1 tb wd caviar black
kernel 3.4.9-1-ARCH
video driver fglrx
desktop manager gnome 3.4.2
i'm using init and not systemd (i don't have experience on it, so i didn't make experiment)
often (2 times of 3) after the grub system doesn't boot, i disabled quiet mode and the last messagge that i can see is

: : running early hook [udev]
: : running hook [udev]
: : triggering uevents. . .

i look at boot.log kernel.log dmesg but i didn't find nothing interesting.
here the logs:
Boot.log
kernel.log
Dmesg

WonderWoofy · 2012-08-24 15:52:51

You are right there is really nothing all too interesting in those logs that I can see either. Have you tried any of this

https://wiki.archlinux.org/index.php/Boot_Debugging

Maybe you can go through some of that to narrow it down. As of now, it may just be too vague to really help you out. I would try to disable the clearing of boot messages/info. Go find some more info... good luck!

iambig · 2012-08-26 20:29:20

I followed the guide https://wiki.archlinux.org/index.php/Boot_Debugging
I set extreme debug option (loglevel=8) then i checked the log printed on the screen.
the line before the last says "ATK0110 ATK0110:00: EC enabled", there is a second line after it but I can't read it clearly.

here is dmesg of a successful boot.

iambig · 2012-08-26 20:57:47

i did some reboots after i had disabled "fuse", so i discovered that the line where the boot hang is different every time.

WonderWoofy · 2012-08-27 05:57:48

How long have you tried to wait for the system to boot? Also, have ou backgrounded your daemons? From limited knowledge/information, it seems you may be just waiting for something to finish executing loading... I am not even remotely certain about this though, as the ATK... stuff seems to be amd related, and I use Intel.

iambig · 2012-08-30 09:57:14

after the debug i discovered that i have a common error for ati closed driver, that it seems unresolvable.
i found this ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG like in this post https://bbs.archlinux.org/viewtopic.php?id=141342
it's a common error.
until i'll have a nvidia card my arch system is useless.
so cya in better green time

Arch Linux

#1 2012-08-24 07:12:16

faill boot

#2 2012-08-24 15:52:51

Re: faill boot

#3 2012-08-26 20:29:20

Re: faill boot

#4 2012-08-26 20:57:47

Re: faill boot

#5 2012-08-27 05:57:48

Re: faill boot

#6 2012-08-30 09:57:14

Re: faill boot

Board footer