You are not logged in.
Hi all,
I have a Samsung YP-U3 mp3 player, which currently I can't use as it won't mount. I've spend a while trying to figure this out, so any help is appreciated!
EDIT: I don't wish to use Amarok etc. Also I've tried mtpfs, but it doesn't show any of the actual files. I'm trying go-mtpfs, but can't install it. I get the following response from yaourt:
==> Starting build()...
github.com/hanwen/go-mtpfs (download)
cd .
git clone https://github.com/hanwen/go-mtpfs /tmp/yaourt-tmp-archimedes/aur-go-mtpfs-git/src/src/github.com/hanwen/go-mtpfs
# cd .; git clone https://github.com/hanwen/go-mtpfs /tmp/yaourt-tmp-archimedes/aur-go-mtpfs-git/src/src/github.com/hanwen/go-mtpfs
package github.com/hanwen/go-mtpfs: exec: "git": executable file not found in $PATH
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build go-mtpfs-git.for this PKGBUILD https://aur.archlinux.org/packages/go/g … t/PKGBUILD
Some info:
Media player says "Connected, Fully charged (or charging)" for ten seconds or so, and then lights go out.
It isn't in /run/media/user/.
It doesn't show up with fdisk, but does with lsusb:
Bus 001 Device 003: ID 04e8:507d Samsung Electronics Co., Ltd YP-U3 (mtp)This is the result of mtp-detect:
$ mtp-detect
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5
Listing raw device(s)
Device 0 (VID=04e8 and PID=507d) is a Samsung YP-U3.
Found 1 device(s):
Samsung: YP-U3 (04e8:507d) @ bus 1, dev 3
Attempting to connect device(s)
USB low-level info:
Interface has a kernel driver attached.
bcdUSB: 512
bDeviceClass: 0
bDeviceSubClass: 0
bDeviceProtocol: 0
idVendor: 04e8
idProduct: 507d
IN endpoint maxpacket: 512 bytes
OUT endpoint maxpacket: 512 bytes
Raw device info:
Bus location: 1
Device number: 3
Device entry info:
Vendor: Samsung
Vendor id: 0x04e8
Product: YP-U3
Vendor id: 0x507d
Device flags: 0x00000002And mtp-connect
sudo mtp-connect
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5
Device 0 (VID=04e8 and PID=507d) is a Samsung YP-U3.
Usage: connect <command1> <command2>
Commands: --delete [filename]
--sendfile [source] [destination]
--sendtrack [source] [destination]
--getfile [source] [destination]
--newfolder [foldername]Finally, I tried this http://lobzang.free.fr/tip005.html but it didn't seem to work.
Cheers!
Last edited by ianhoolihan (2012-10-28 20:16:23)
Offline
Solved.
Firstly, I didn't have git installed. When I did, I could install go-mtpfs, which does a little better than mtpfs by the looks of things.
Offline