You are not logged in.

#1 2012-10-28 14:04:04

ianhoolihan
Member
Registered: 2011-08-20
Posts: 85

[solved] Can't mount Samsung YP-U3 mp3 player

Hi all,

I have a Samsung YP-U3 mp3 player, which currently I can't use as it won't mount. I've spend a while trying to figure this out, so any help is appreciated!

EDIT: I don't wish to use Amarok etc. Also I've tried mtpfs, but it doesn't show any of the actual files. I'm trying go-mtpfs, but can't install it. I get the following response from yaourt:

==> Starting build()...
github.com/hanwen/go-mtpfs (download)
cd .
git clone https://github.com/hanwen/go-mtpfs /tmp/yaourt-tmp-archimedes/aur-go-mtpfs-git/src/src/github.com/hanwen/go-mtpfs
# cd .; git clone https://github.com/hanwen/go-mtpfs /tmp/yaourt-tmp-archimedes/aur-go-mtpfs-git/src/src/github.com/hanwen/go-mtpfs
package github.com/hanwen/go-mtpfs: exec: "git": executable file not found in $PATH
==> ERROR: A failure occurred in build().
    Aborting...
==> ERROR: Makepkg was unable to build go-mtpfs-git.

for this PKGBUILD https://aur.archlinux.org/packages/go/g … t/PKGBUILD

Some info:

Media player says "Connected, Fully charged (or charging)" for ten seconds or so, and then lights go out.

It isn't in /run/media/user/.

It doesn't show up with fdisk, but does with lsusb:

Bus 001 Device 003: ID 04e8:507d Samsung Electronics Co., Ltd YP-U3 (mtp)

This is the result of mtp-detect:

$ mtp-detect
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5

Listing raw device(s)
Device 0 (VID=04e8 and PID=507d) is a Samsung YP-U3.
   Found 1 device(s):
   Samsung: YP-U3 (04e8:507d) @ bus 1, dev 3
Attempting to connect device(s)
USB low-level info:
   Interface has a kernel driver attached.
   bcdUSB: 512
   bDeviceClass: 0
   bDeviceSubClass: 0
   bDeviceProtocol: 0
   idVendor: 04e8
   idProduct: 507d
   IN endpoint maxpacket: 512 bytes
   OUT endpoint maxpacket: 512 bytes
   Raw device info:
      Bus location: 1
      Device number: 3
      Device entry info:
         Vendor: Samsung
         Vendor id: 0x04e8
         Product: YP-U3
         Vendor id: 0x507d
         Device flags: 0x00000002

And mtp-connect

sudo mtp-connect 
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5

Device 0 (VID=04e8 and PID=507d) is a Samsung YP-U3.
Usage: connect <command1> <command2>
Commands: --delete [filename]
          --sendfile [source] [destination]
          --sendtrack [source] [destination]
          --getfile [source] [destination]
          --newfolder [foldername]

Finally, I tried this http://lobzang.free.fr/tip005.html but it didn't seem to work.

Cheers!

Last edited by ianhoolihan (2012-10-28 20:16:23)

Offline

#2 2012-10-28 20:15:58

ianhoolihan
Member
Registered: 2011-08-20
Posts: 85

Re: [solved] Can't mount Samsung YP-U3 mp3 player

Solved.

Firstly, I didn't have git installed. When I did, I could install go-mtpfs, which does a little better than mtpfs by the looks of things.

Offline

Board footer

Powered by FluxBB