You are not logged in.

#1 2012-11-02 02:38:58

PhilipWitte
Member
Registered: 2012-02-03
Posts: 45

GDM 3.6 wont start

I installed a brand new system two days ago, from the latest Arch ISO. I'm using Xorg 1.11 and Catalyst 12.6 from the official xorg111/hd234k repos. My DE is Gnome Shell 3.6.1. Arch is dual booted alongside Windows 8 (sda1/2 for Win8, sda3/4 for Arch, no Swap). The hardware is a AMD Phenome II x4 920, ATi HD Radeon 4870 512mb, and 8Gb of ram.

This is the first time I've tried to use both systemd and grub2. But so far all the help I've been able to get from the IRC has lead to dead-ends. As far as I know, I've read the docs very thoroughly and set everything up correctly, and everything does work perfectly except for GDM. Meaning if I put "exec gnome-session" in ~/.xinitrc and '$ startx' then Gnome Shell starts up and runs fine (though keyring doesn't remember my passwords).

Yes, I have set "nomodeset" in /etc/default/grub and generated Grub2 correctly
Yes, I have set up systemd correctly (hostname, locale, timezone, hwclock, kernel modules, etc). Like I said, everything works great in Gnome-Shell.
Yes, I have run "systemd enable gdm", but gdm fails to load, and while no error message display at boot (it just sits there after the "systemd-fsdisk : clean ... " message), disabling GDM then running it manually ("# gdm") says that Xorg failed to load, and to check the Xorg logs.

Well I've checked the Xorg logs, and the errors present don't return any useful results on Google... so I'm posting here in hope this isn't just some odd bug with my system specifically. The logs are as follows:

Log: /var/log/Xorg.log.old (this is the one generated [i believe] from running '# gdm')

[    25.921] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    25.924] X Protocol Version 11, Revision 0
[    25.925] Build Operating System: Linux 3.3.7-1-ARCH x86_64 
[    25.926] Current Operating System: Linux philip-linux 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[    25.927] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cc87c822-7ff7-43c0-9d61-4770c2e40d0c ro nomodeset quiet
[    25.928] Build Date: 01 June 2012  05:44:06PM
[    25.929]  
[    25.930] Current version of pixman: 0.26.2
[    25.931] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    25.934] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.938] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  1 21:11:33 2012
[    25.999] (==) Using config file: "/etc/X11/xorg.conf"
[    26.001] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    26.022] (==) ServerLayout "aticonfig Layout"
[    26.022] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    26.022] (**) |   |-->Monitor "<default monitor>"
[    26.023] (**) |   |-->Device "aticonfig-Device[0]-0"
[    26.023] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
	Using a default monitor configuration.
[    26.023] (==) Automatically adding devices
[    26.023] (==) Automatically enabling devices
[    26.136] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    26.136] 	Entry deleted from font path.
[    26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    26.138] 	Entry deleted from font path.
[    26.138] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    26.138] 	Entry deleted from font path.
[    26.138] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    26.138] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    26.138] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.138] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.138] (II) Loader magic: 0x7c7ae0
[    26.138] (II) Module ABI versions:
[    26.138] 	X.Org ANSI C Emulation: 0.4
[    26.138] 	X.Org Video Driver: 11.0
[    26.138] 	X.Org XInput driver : 13.0
[    26.138] 	X.Org Server Extension : 6.0
[    26.140] (--) PCI:*(0:1:0:0) 1002:9440:1043:01fc rev 0, Mem @ 0xd0000000/268435456, 0xfbef0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    26.140] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    26.140] (II) "extmod" will be loaded by default.
[    26.140] (II) "dbe" will be loaded by default.
[    26.140] (II) "glx" will be loaded by default.
[    26.140] (II) "record" will be loaded by default.
[    26.140] (II) "dri" will be loaded by default.
[    26.140] (II) "dri2" will be loaded by default.
[    26.140] (II) LoadModule: "extmod"
[    26.156] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    26.168] (II) Module extmod: vendor="X.Org Foundation"
[    26.168] 	compiled for 1.11.4, module version = 1.0.0
[    26.168] 	Module class: X.Org Server Extension
[    26.168] 	ABI class: X.Org Server Extension, version 6.0
[    26.168] (II) Loading extension MIT-SCREEN-SAVER
[    26.168] (II) Loading extension XFree86-VidModeExtension
[    26.168] (II) Loading extension XFree86-DGA
[    26.168] (II) Loading extension DPMS
[    26.168] (II) Loading extension XVideo
[    26.168] (II) Loading extension XVideo-MotionCompensation
[    26.168] (II) Loading extension X-Resource
[    26.168] (II) LoadModule: "dbe"
[    26.169] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    26.175] (II) Module dbe: vendor="X.Org Foundation"
[    26.175] 	compiled for 1.11.4, module version = 1.0.0
[    26.175] 	Module class: X.Org Server Extension
[    26.175] 	ABI class: X.Org Server Extension, version 6.0
[    26.175] (II) Loading extension DOUBLE-BUFFER
[    26.175] (II) LoadModule: "glx"
[    26.176] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.190] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    26.191] 	compiled for 6.9.0, module version = 1.0.0
[    26.191] (II) Loading extension GLX
[    26.191] (II) LoadModule: "record"
[    26.191] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.198] (II) Module record: vendor="X.Org Foundation"
[    26.198] 	compiled for 1.11.4, module version = 1.13.0
[    26.198] 	Module class: X.Org Server Extension
[    26.198] 	ABI class: X.Org Server Extension, version 6.0
[    26.198] (II) Loading extension RECORD
[    26.198] (II) LoadModule: "dri"
[    26.198] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.201] (II) Module dri: vendor="X.Org Foundation"
[    26.201] 	compiled for 1.11.4, module version = 1.0.0
[    26.201] 	ABI class: X.Org Server Extension, version 6.0
[    26.201] (II) Loading extension XFree86-DRI
[    26.201] (II) LoadModule: "dri2"
[    26.201] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.202] (II) Module dri2: vendor="X.Org Foundation"
[    26.202] 	compiled for 1.11.4, module version = 1.2.0
[    26.202] 	ABI class: X.Org Server Extension, version 6.0
[    26.202] (II) Loading extension DRI2
[    26.202] (II) LoadModule: "fglrx"
[    26.210] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    26.441] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    26.455] 	compiled for 1.4.99.906, module version = 8.97.2
[    26.455] 	Module class: X.Org Video Driver
[    26.456] (II) Loading sub module "fglrxdrm"
[    26.456] (II) LoadModule: "fglrxdrm"
[    26.456] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    26.466] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    26.466] 	compiled for 1.4.99.906, module version = 8.97.2
[    26.466] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    26.466] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3               
[    26.466] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30
[    26.466] (++) using VT number 1

[    26.467] (WW) Falling back to old probe method for fglrx
[    26.506] (II) Loading PCS database from /etc/ati/amdpcsdb
[    26.520] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    26.528] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    26.539] (II) AMD Video driver is signed
[    26.539] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    26.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    26.539] (II) fglrx(0): pEnt->device->identifier=0xaebed0
[    26.540] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    26.540] (II) Loading sub module "vgahw"
[    26.540] (II) LoadModule: "vgahw"
[    26.540] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    26.541] (II) Module vgahw: vendor="X.Org Foundation"
[    26.541] 	compiled for 1.11.4, module version = 0.1.0
[    26.541] 	ABI class: X.Org Video Driver, version 11.0
[    26.541] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    26.541] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    26.541] (==) fglrx(0): Default visual is TrueColor
[    26.541] (==) fglrx(0): RGB weight 888
[    26.541] (II) fglrx(0): Using 8 bits per RGB 
[    26.541] (==) fglrx(0): Buffer Tiling is ON
[    26.542] (II) Loading sub module "fglrxdrm"
[    26.542] (II) LoadModule: "fglrxdrm"
[    26.543] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    26.543] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    26.543] 	compiled for 1.4.99.906, module version = 8.97.2
[    26.546] ukiDynamicMajor: found major device number 251
[    26.546] ukiDynamicMajor: found major device number 251
[    26.546] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.546] ukiOpenDevice: node name is /dev/ati/card0
[    26.546] ukiOpenDevice: open result is 11, (OK)
[    26.546] ukiOpenByBusid: ukiOpenMinor returns 11
[    26.546] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.546] (**) fglrx(0): NoAccel = NO
[    26.546] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    26.546] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series        " (Chipset = 0x9440)
[    26.546] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01fc)
[    26.546] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    26.546] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    26.546] (--) fglrx(0): MMIO registers at 0xfbef0000
[    26.546] (--) fglrx(0): I/O port at 0x0000d000
[    26.546] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    26.564] (II) fglrx(0): AC Adapter is used
[    26.589] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    26.591] (II) Loading sub module "vbe"
[    26.591] (II) LoadModule: "vbe"
[    26.592] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    26.593] (II) Module vbe: vendor="X.Org Foundation"
[    26.593] 	compiled for 1.11.4, module version = 1.1.0
[    26.593] 	ABI class: X.Org Video Driver, version 11.0
[    26.593] (II) fglrx(0): VESA BIOS detected
[    26.593] (II) fglrx(0): VESA VBE Version 3.0
[    26.593] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    26.593] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    26.593] (II) fglrx(0): VESA VBE OEM Software Rev: 11.7
[    26.593] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    26.593] (II) fglrx(0): VESA VBE OEM Product: RV770
[    26.593] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    26.631] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    26.632] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[    26.632] (II) fglrx(0): PCIE card detected
[    26.632] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    26.632] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    26.633] (II) fglrx(0): Using adapter: 1:0.0.
[    26.665] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    26.672] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[    26.672] (II) fglrx(0): RandR 1.2 support is enabled!
[    26.672] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    26.672] (==) fglrx(0): Center Mode is disabled 
[    26.672] (II) Loading sub module "fb"
[    26.672] (II) LoadModule: "fb"
[    26.672] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.685] (II) Module fb: vendor="X.Org Foundation"
[    26.685] 	compiled for 1.11.4, module version = 1.0.0
[    26.685] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    26.685] (II) Loading sub module "ddc"
[    26.685] (II) LoadModule: "ddc"
[    26.685] (II) Module "ddc" already built-in
[    27.457] (II) fglrx(0): Finished Initialize PPLIB!
[    27.479] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[    27.479] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    27.479] (**) fglrx(0): Option "Position" "0 0"
[    27.479] (**) fglrx(0): Option "Disable" "false"
[    27.479] (**) fglrx(0): Option "Rotate" "normal"
[    27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[    27.479] (II) fglrx(0): Output DFP2 using monitor section 0-DFP2
[    27.479] (**) fglrx(0): Option "Position" "331 1080"
[    27.479] (**) fglrx(0): Option "Disable" "true"
[    27.479] (**) fglrx(0): Option "Rotate" "normal"
[    27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[    27.479] (II) fglrx(0): Output CRT1 has no monitor section
[    27.479] (II) fglrx(0): Output CRT2 has no monitor section
[    27.479] (II) fglrx(0): Output TV has no monitor section
[    27.479] (II) fglrx(0): Output CV has no monitor section
[    27.479] (II) Loading sub module "ddc"
[    27.479] (II) LoadModule: "ddc"
[    27.479] (II) Module "ddc" already built-in
[    27.479] (II) fglrx(0): Connected Display0: DFP1
[    27.479] (II) fglrx(0): Display0 EDID data ---------------------------
[    27.479] (II) fglrx(0): Manufacturer: ACR  Model: 87  Serial#: 2435877271
[    27.479] (II) fglrx(0): Year: 2009  Week: 13
[    27.479] (II) fglrx(0): EDID Version: 1.3
[    27.479] (II) fglrx(0): Digital Display Input
[    27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    27.479] (II) fglrx(0): Gamma: 2.20
[    27.479] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[    27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.479] (II) fglrx(0): First detailed timing is preferred mode
[    27.479] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    27.479] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    27.479] (II) fglrx(0): Supported established timings:
[    27.479] (II) fglrx(0): 720x400@70Hz
[    27.479] (II) fglrx(0): 640x480@60Hz
[    27.479] (II) fglrx(0): 640x480@67Hz
[    27.479] (II) fglrx(0): 640x480@72Hz
[    27.479] (II) fglrx(0): 640x480@75Hz
[    27.479] (II) fglrx(0): 800x600@56Hz
[    27.479] (II) fglrx(0): 800x600@60Hz
[    27.479] (II) fglrx(0): 800x600@72Hz
[    27.479] (II) fglrx(0): 800x600@75Hz
[    27.479] (II) fglrx(0): 832x624@75Hz
[    27.479] (II) fglrx(0): 1024x768@60Hz
[    27.479] (II) fglrx(0): 1024x768@70Hz
[    27.479] (II) fglrx(0): 1024x768@75Hz
[    27.479] (II) fglrx(0): 1280x1024@75Hz
[    27.479] (II) fglrx(0): 1152x864@75Hz
[    27.479] (II) fglrx(0): Manufacturer's mask: 0
[    27.479] (II) fglrx(0): Supported standard timings:
[    27.479] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    27.479] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.479] (II) fglrx(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    27.479] (II) fglrx(0): #3: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.479] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    27.479] (II) fglrx(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.479] (II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.479] (II) fglrx(0): #7: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    27.479] (II) fglrx(0): Supported detailed timing:
[    27.479] (II) fglrx(0): clock: 138.5 MHz   Image Size:  531 x 299 mm
[    27.479] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    27.479] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0
[    27.479] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    27.479] (II) fglrx(0): Monitor name: H213H
[    27.479] (II) fglrx(0): Serial No: LF80D0028500
[    27.479] (II) fglrx(0): EDID (in hex):
[    27.479] (II) fglrx(0): 	00ffffffffffff000472870097893091
[    27.479] (II) fglrx(0): 	0d13010380301b78caee95a3544c9926
[    27.479] (II) fglrx(0): 	0f5054bfef80714f8180b300d1c09500
[    27.479] (II) fglrx(0): 	a940814081c01a3680a070381e403020
[    27.479] (II) fglrx(0): 	3500132b21000018000000fd00384c1f
[    27.479] (II) fglrx(0): 	5311000a202020202020000000fc0048
[    27.479] (II) fglrx(0): 	323133480a20202020202020000000ff
[    27.479] (II) fglrx(0): 	004c46383044303032383530300a001a
[    27.479] (II) fglrx(0): End of Display0 EDID data --------------------
[    27.479] (II) fglrx(0): Connected Display1: DFP2
[    27.479] (II) fglrx(0): Display1 EDID data ---------------------------
[    27.479] (II) fglrx(0): Manufacturer: WAC  Model: 1019  Serial#: 5284
[    27.479] (II) fglrx(0): Year: 2008  Week: 5
[    27.479] (II) fglrx(0): EDID Version: 1.3
[    27.479] (II) fglrx(0): Digital Display Input
[    27.479] (II) fglrx(0): DFP 1.x compatible TMDS
[    27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 27  vert.: 17
[    27.479] (II) fglrx(0): Gamma: 2.20
[    27.479] (II) fglrx(0): DPMS capabilities: StandBy Off
[    27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.479] (II) fglrx(0): First detailed timing is preferred mode
[    27.479] (II) fglrx(0): redX: 0.589 redY: 0.341   greenX: 0.321 greenY: 0.535
[    27.479] (II) fglrx(0): blueX: 0.157 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    27.479] (II) fglrx(0): Supported established timings:
[    27.479] (II) fglrx(0): 720x400@70Hz
[    27.479] (II) fglrx(0): 640x480@60Hz
[    27.479] (II) fglrx(0): 640x480@75Hz
[    27.479] (II) fglrx(0): 800x600@60Hz
[    27.479] (II) fglrx(0): 800x600@72Hz
[    27.479] (II) fglrx(0): 800x600@75Hz
[    27.479] (II) fglrx(0): 832x624@75Hz
[    27.479] (II) fglrx(0): 1024x768@60Hz
[    27.479] (II) fglrx(0): 1024x768@70Hz
[    27.479] (II) fglrx(0): 1024x768@75Hz
[    27.479] (II) fglrx(0): Manufacturer's mask: 0
[    27.479] (II) fglrx(0): Supported standard timings:
[    27.479] (II) fglrx(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    27.479] (II) fglrx(0): Supported detailed timing:
[    27.479] (II) fglrx(0): clock: 83.4 MHz   Image Size:  261 x 163 mm
[    27.479] (II) fglrx(0): h_active: 1280  h_sync: 1480  h_sync_end 1616 h_blank_end 1680 h_border: 0
[    27.479] (II) fglrx(0): v_active: 800  v_sync: 824  v_sync_end 827 v_blanking: 828 v_border: 0
[    27.479] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[    27.479] (II) fglrx(0): Serial No: 8AC005284
[    27.479] (II) fglrx(0): Monitor name: Cintiq 12WX
[    27.479] (II) fglrx(0): EDID (in hex):
[    27.479] (II) fglrx(0): 	00ffffffffffff005c231910a4140000
[    27.479] (II) fglrx(0): 	05120103811b1178aad4459657528928
[    27.479] (II) fglrx(0): 	255054a5ee0081000101010101010101
[    27.479] (II) fglrx(0): 	0101010101019420009051201c30c888
[    27.479] (II) fglrx(0): 	830405a31000001e000000fd00384b1f
[    27.479] (II) fglrx(0): 	520e000a202020202020000000ff0038
[    27.479] (II) fglrx(0): 	414330303532383420202020000000fc
[    27.479] (II) fglrx(0): 	0043696e74697120313257580a200023
[    27.479] (II) fglrx(0): End of Display1 EDID data --------------------
[    27.767] (II) fglrx(0): EDID for output DFP1
[    27.767] (II) fglrx(0): Manufacturer: ACR  Model: 87  Serial#: 2435877271
[    27.767] (II) fglrx(0): Year: 2009  Week: 13
[    27.767] (II) fglrx(0): EDID Version: 1.3
[    27.768] (II) fglrx(0): Digital Display Input
[    27.768] (II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    27.768] (II) fglrx(0): Gamma: 2.20
[    27.768] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[    27.768] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.768] (II) fglrx(0): First detailed timing is preferred mode
[    27.768] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    27.768] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    27.768] (II) fglrx(0): Supported established timings:
[    27.768] (II) fglrx(0): 720x400@70Hz
[    27.768] (II) fglrx(0): 640x480@60Hz
[    27.768] (II) fglrx(0): 640x480@67Hz
[    27.768] (II) fglrx(0): 640x480@72Hz
[    27.768] (II) fglrx(0): 640x480@75Hz
[    27.768] (II) fglrx(0): 800x600@56Hz
[    27.768] (II) fglrx(0): 800x600@60Hz
[    27.768] (II) fglrx(0): 800x600@72Hz
[    27.768] (II) fglrx(0): 800x600@75Hz
[    27.768] (II) fglrx(0): 832x624@75Hz
[    27.768] (II) fglrx(0): 1024x768@60Hz
[    27.768] (II) fglrx(0): 1024x768@70Hz
[    27.768] (II) fglrx(0): 1024x768@75Hz
[    27.768] (II) fglrx(0): 1280x1024@75Hz
[    27.768] (II) fglrx(0): 1152x864@75Hz
[    27.768] (II) fglrx(0): Manufacturer's mask: 0
[    27.768] (II) fglrx(0): Supported standard timings:
[    27.768] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    27.768] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.768] (II) fglrx(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    27.768] (II) fglrx(0): #3: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.768] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    27.768] (II) fglrx(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.768] (II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.768] (II) fglrx(0): #7: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    27.768] (II) fglrx(0): Supported detailed timing:
[    27.768] (II) fglrx(0): clock: 138.5 MHz   Image Size:  531 x 299 mm
[    27.768] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    27.768] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0
[    27.768] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    27.768] (II) fglrx(0): Monitor name: H213H
[    27.768] (II) fglrx(0): Serial No: LF80D0028500
[    27.768] (II) fglrx(0): EDID (in hex):
[    27.768] (II) fglrx(0): 	00ffffffffffff000472870097893091
[    27.768] (II) fglrx(0): 	0d13010380301b78caee95a3544c9926
[    27.768] (II) fglrx(0): 	0f5054bfef80714f8180b300d1c09500
[    27.768] (II) fglrx(0): 	a940814081c01a3680a070381e403020
[    27.768] (II) fglrx(0): 	3500132b21000018000000fd00384c1f
[    27.768] (II) fglrx(0): 	5311000a202020202020000000fc0048
[    27.768] (II) fglrx(0): 	323133480a20202020202020000000ff
[    27.768] (II) fglrx(0): 	004c46383044303032383530300a001a
[    27.768] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    27.781] (II) fglrx(0): Using EDID range info for horizontal sync
[    27.781] (II) fglrx(0): Using EDID range info for vertical refresh
[    27.781] (II) fglrx(0): Printing DDC gathered Modelines:
[    27.781] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.781] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.781] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.781] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    27.781] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    27.781] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    27.781] (II) fglrx(0): Printing probed modes for output DFP1
[    27.781] (II) fglrx(0): Modeline "1920x1080"x60.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 +hsync +vsync (66.6 kHz)
[    27.781] (II) fglrx(0): Modeline "1776x1000"x60.0  147.05  1776 1880 2072 2368  1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[    27.781] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 -hsync -vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[    27.781] (II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[    27.781] (II) fglrx(0): Modeline "1360x1024"x60.0  116.01  1360 1448 1592 1824  1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync -vsync (55.9 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 +hsync -vsync (75.2 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x800"x75.0  107.21  1280 1360 1496 1712  800 801 804 835 +hsync -vsync (62.6 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
[    27.781] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 -hsync -vsync (67.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x768"x75.0  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 -hsync -vsync (35.2 kHz)
[    27.781] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    27.781] (II) fglrx(0): EDID for output DFP2
[    27.781] (II) fglrx(0): Manufacturer: WAC  Model: 1019  Serial#: 5284
[    27.781] (II) fglrx(0): Year: 2008  Week: 5
[    27.781] (II) fglrx(0): EDID Version: 1.3
[    27.781] (II) fglrx(0): Digital Display Input
[    27.781] (II) fglrx(0): DFP 1.x compatible TMDS
[    27.781] (II) fglrx(0): Max Image Size [cm]: horiz.: 27  vert.: 17
[    27.781] (II) fglrx(0): Gamma: 2.20
[    27.781] (II) fglrx(0): DPMS capabilities: StandBy Off
[    27.781] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    27.781] (II) fglrx(0): First detailed timing is preferred mode
[    27.781] (II) fglrx(0): redX: 0.589 redY: 0.341   greenX: 0.321 greenY: 0.535
[    27.781] (II) fglrx(0): blueX: 0.157 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    27.781] (II) fglrx(0): Supported established timings:
[    27.781] (II) fglrx(0): 720x400@70Hz
[    27.781] (II) fglrx(0): 640x480@60Hz
[    27.781] (II) fglrx(0): 640x480@75Hz
[    27.781] (II) fglrx(0): 800x600@60Hz
[    27.781] (II) fglrx(0): 800x600@72Hz
[    27.781] (II) fglrx(0): 800x600@75Hz
[    27.781] (II) fglrx(0): 832x624@75Hz
[    27.781] (II) fglrx(0): 1024x768@60Hz
[    27.781] (II) fglrx(0): 1024x768@70Hz
[    27.781] (II) fglrx(0): 1024x768@75Hz
[    27.781] (II) fglrx(0): Manufacturer's mask: 0
[    27.781] (II) fglrx(0): Supported standard timings:
[    27.781] (II) fglrx(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    27.781] (II) fglrx(0): Supported detailed timing:
[    27.781] (II) fglrx(0): clock: 83.4 MHz   Image Size:  261 x 163 mm
[    27.781] (II) fglrx(0): h_active: 1280  h_sync: 1480  h_sync_end 1616 h_blank_end 1680 h_border: 0
[    27.781] (II) fglrx(0): v_active: 800  v_sync: 824  v_sync_end 827 v_blanking: 828 v_border: 0
[    27.781] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[    27.781] (II) fglrx(0): Serial No: 8AC005284
[    27.781] (II) fglrx(0): Monitor name: Cintiq 12WX
[    27.781] (II) fglrx(0): EDID (in hex):
[    27.781] (II) fglrx(0): 	00ffffffffffff005c231910a4140000
[    27.781] (II) fglrx(0): 	05120103811b1178aad4459657528928
[    27.781] (II) fglrx(0): 	255054a5ee0081000101010101010101
[    27.781] (II) fglrx(0): 	0101010101019420009051201c30c888
[    27.781] (II) fglrx(0): 	830405a31000001e000000fd00384b1f
[    27.781] (II) fglrx(0): 	520e000a202020202020000000ff0038
[    27.781] (II) fglrx(0): 	414330303532383420202020000000fc
[    27.781] (II) fglrx(0): 	0043696e74697120313257580a200023
[    27.781] (II) fglrx(0): Printing probed modes for output DFP2
[    27.781] (II) fglrx(0): Modeline "1280x800"x60.0   83.40  1280 1480 1616 1680  800 824 827 828 -hsync -vsync (49.6 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    27.781] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1152x648"x60.0   59.90  1152 1200 1320 1488  648 649 652 671 +hsync -vsync (40.3 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[    27.781] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[    27.781] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[    27.781] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    27.781] (II) fglrx(0): EDID for output CRT1
[    27.781] (II) fglrx(0): EDID for output CRT2
[    27.782] (II) fglrx(0): EDID for output TV
[    27.782] (II) fglrx(0): EDID for output CV
[    27.782] (II) fglrx(0): Output DFP1 connected
[    27.782] (II) fglrx(0): Output DFP2 disabled by config file
[    27.782] (II) fglrx(0): Output CRT1 disconnected
[    27.782] (II) fglrx(0): Output CRT2 disconnected
[    27.782] (II) fglrx(0): Output TV disconnected
[    27.782] (II) fglrx(0): Output CV disconnected
[    27.782] (II) fglrx(0): Using user preference for initial modes
[    27.782] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[    27.782] (II) fglrx(0): Display dimensions: (480, 270) mm
[    27.782] (II) fglrx(0): DPI set to (101, 101)
[    27.782] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series         has 2 configurable heads and 2 displays connected.
[    27.782] (==) fglrx(0):  PseudoColor visuals disabled
[    27.782] (II) Loading sub module "ramdac"
[    27.782] (II) LoadModule: "ramdac"
[    27.782] (II) Module "ramdac" already built-in
[    27.782] (==) fglrx(0): NoDRI = NO
[    27.782] (==) fglrx(0): Capabilities: 0x00000000
[    27.782] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    27.782] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    27.782] (==) fglrx(0): UseFastTLS=0
[    27.782] (==) fglrx(0): BlockSignalsOnLock=1
[    27.782] (II) fglrx(0): Desktop Vsync is enabled.
[    27.782] (--) Depth 24 pixmap format is 32 bpp
[    27.782] (II) Loading extension ATIFGLRXDRI
[    27.782] (II) fglrx(0): doing swlDriScreenInit
[    27.782] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    27.782] ukiDynamicMajor: found major device number 251
[    27.782] ukiDynamicMajor: found major device number 251
[    27.782] ukiDynamicMajor: found major device number 251
[    27.782] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    27.782] ukiOpenDevice: node name is /dev/ati/card0
[    27.782] ukiOpenDevice: open result is 16, (OK)
[    27.782] ukiOpenByBusid: ukiOpenMinor returns 16
[    27.782] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    27.782] (II) fglrx(0): [uki] DRM interface version 1.0
[    27.782] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    27.782] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    27.782] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f541545b000
[    27.782] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    27.782] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    27.782] (II) fglrx(0): swlDriScreenInit done
[    27.782] (II) fglrx(0): Kernel Module Version Information:
[    27.782] (II) fglrx(0):     Name: fglrx
[    27.782] (II) fglrx(0):     Version: 8.97.2
[    27.782] (II) fglrx(0):     Date: Jul  4 2012
[    27.782] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    27.782] (II) fglrx(0): Kernel Module version matches driver.
[    27.782] (II) fglrx(0): Kernel Module Build Time Information:
[    27.782] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.6.4-1-ARCH
[    27.782] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    27.782] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    27.782] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    27.782] (II) fglrx(0): [uki] register handle = 0x00004000
[    27.799] (II) fglrx(0): DRI initialization successfull
[    27.800] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[    27.804] (==) fglrx(0): Backing store disabled
[    27.804] (II) Loading extension FGLRXEXTENSION
[    27.804] (==) fglrx(0): DPMS enabled
[    27.804] (II) fglrx(0): Initialized in-driver Xinerama extension
[    27.804] (**) fglrx(0): Textured Video is enabled.
[    27.804] (II) LoadModule: "glesx"
[    27.805] (II) Loading /usr/lib/xorg/modules/glesx.so
[    27.934] (II) Module glesx: vendor="X.Org Foundation"
[    27.934] 	compiled for 1.4.99.906, module version = 1.0.0
[    27.934] (II) Loading extension GLESX
[    27.934] (II) fglrx(0): GLESX enableFlags = 528
[    27.945] (II) fglrx(0): GLESX is enabled
[    27.945] (II) LoadModule: "amdxmm"
[    27.945] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    27.955] (II) Module amdxmm: vendor="X.Org Foundation"
[    27.955] 	compiled for 1.4.99.906, module version = 2.0.0
[    27.955] (II) Loading extension AMDXVOPL
[    27.955] (II) Loading extension AMDXVBA
[    27.958] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    27.961] (II) fglrx(0): Enable composite support successfully
[    27.961] (II) fglrx(0): X context handle = 0x1
[    27.961] (II) fglrx(0): [DRI] installation complete
[    27.961] (==) fglrx(0): Silken mouse enabled
[    27.962] (==) fglrx(0): Using HW cursor of display infrastructure!
[    27.962] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    27.962] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[    27.962] (II) fglrx(0): Cannot set TV horizontal size.
[    27.962] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[    27.962] (II) fglrx(0): Cannot set TV horizontal position.
[    27.962] (II) fglrx(0): Cannot set TV vertical position.
[    27.984] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[    28.079] (--) RandR disabled
[    28.079] (II) Initializing built-in extension Generic Event Extension
[    28.079] (II) Initializing built-in extension SHAPE
[    28.079] (II) Initializing built-in extension MIT-SHM
[    28.079] (II) Initializing built-in extension XInputExtension
[    28.079] (II) Initializing built-in extension XTEST
[    28.079] (II) Initializing built-in extension BIG-REQUESTS
[    28.079] (II) Initializing built-in extension SYNC
[    28.079] (II) Initializing built-in extension XKEYBOARD
[    28.079] (II) Initializing built-in extension XC-MISC
[    28.079] (II) Initializing built-in extension SECURITY
[    28.079] (II) Initializing built-in extension XINERAMA
[    28.079] (II) Initializing built-in extension XFIXES
[    28.079] (II) Initializing built-in extension RENDER
[    28.079] (II) Initializing built-in extension RANDR
[    28.079] (II) Initializing built-in extension COMPOSITE
[    28.079] (II) Initializing built-in extension DAMAGE
[    28.081] ukiDynamicMajor: found major device number 251
[    28.081] ukiDynamicMajor: found major device number 251
[    28.081] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    28.081] ukiOpenDevice: node name is /dev/ati/card0
[    28.081] ukiOpenDevice: open result is 17, (OK)
[    28.081] ukiOpenByBusid: ukiOpenMinor returns 17
[    28.081] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    28.808] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    28.932] (II) fglrx(0): Enable the clock gating!
[    28.977] (II) fglrx(0): Desktop Vsync is enabled.
[    28.977] (II) fglrx(0): Setting screen physical size to 508 x 285
[    29.247] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    29.247] (**) Power Button: Applying InputClass "system-keyboard"
[    29.247] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.247] (II) LoadModule: "evdev"
[    29.247] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.261] (II) Module evdev: vendor="X.Org Foundation"
[    29.261] 	compiled for 1.10.99.902, module version = 2.6.0
[    29.261] 	Module class: X.Org XInput Driver
[    29.261] 	ABI class: X.Org XInput driver, version 13.0
[    29.261] (II) Using input driver 'evdev' for 'Power Button'
[    29.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.261] (**) Power Button: always reports core events
[    29.261] (**) Power Button: Device: "/dev/input/event1"
[    29.261] (--) Power Button: Found keys
[    29.261] (II) Power Button: Configuring as keyboard
[    29.261] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    29.261] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.261] (**) Option "xkb_rules" "evdev"
[    29.261] (**) Option "xkb_model" "pc105+inet"
[    29.261] (**) Option "xkb_layout" "us"
[    29.261] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.305] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    29.305] (**) Power Button: Applying InputClass "system-keyboard"
[    29.305] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.305] (II) Using input driver 'evdev' for 'Power Button'
[    29.305] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.306] (**) Power Button: always reports core events
[    29.306] (**) Power Button: Device: "/dev/input/event0"
[    29.306] (--) Power Button: Found keys
[    29.306] (II) Power Button: Configuring as keyboard
[    29.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    29.306] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    29.306] (**) Option "xkb_rules" "evdev"
[    29.306] (**) Option "xkb_model" "pc105+inet"
[    29.306] (**) Option "xkb_layout" "us"
[    29.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.307] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[    29.307] (II) No input driver specified, ignoring this device.
[    29.307] (II) This device may have been added with another device file.
[    29.308] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/event3)
[    29.308] (**) Wacom Cintiq 12WX: Applying InputClass "evdev tablet catchall"
[    29.308] (**) Wacom Cintiq 12WX: Applying InputClass "Wacom class"
[    29.308] (II) LoadModule: "wacom"
[    29.308] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    29.313] (II) Module wacom: vendor="X.Org Foundation"
[    29.313] 	compiled for 1.11.3, module version = 0.13.0
[    29.313] 	Module class: X.Org XInput Driver
[    29.313] 	ABI class: X.Org XInput driver, version 13.0
[    29.313] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX'
[    29.313] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    29.313] (**) Wacom Cintiq 12WX: always reports core events
[    29.313] (**) Option "Device" "/dev/input/event3"
[    29.314] (II) Wacom Cintiq 12WX: type not specified, assuming 'stylus'.
[    29.314] (II) Wacom Cintiq 12WX: other types will be automatically added.
[    29.314] (--) Wacom Cintiq 12WX stylus: using pressure threshold of 27 for button 1
[    29.314] (--) Wacom Cintiq 12WX stylus: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    29.314] (II) Wacom Cintiq 12WX stylus: hotplugging dependent devices.
[    29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'cursor' for this device.
[    29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'touch' for this device.
[    29.314] (II) Wacom Cintiq 12WX stylus: hotplugging completed.
[    29.315] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    29.315] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX stylus" (type: STYLUS, id 8)
[    29.316] (**) Wacom Cintiq 12WX stylus: (accel) keeping acceleration scheme 1
[    29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration profile 0
[    29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration factor: 2.000
[    29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration threshold: 4
[    29.317] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/mouse0)
[    29.317] (II) No input driver specified, ignoring this device.
[    29.317] (II) This device may have been added with another device file.
[    29.317] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event6)
[    29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[    29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[    29.318] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[    29.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[    29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event6"
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[    29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[    29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[    29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[    29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[    29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[    29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.318] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6/event6"
[    29.318] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[    29.318] (**) Option "xkb_rules" "evdev"
[    29.318] (**) Option "xkb_model" "pc105+inet"
[    29.318] (**) Option "xkb_layout" "us"
[    29.318] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.319] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[    29.319] (WW) Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[    29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[    29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[    29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[    29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[    29.320] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[    29.320] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    29.320] (II) No input driver specified, ignoring this device.
[    29.320] (II) This device may have been added with another device file.
[    29.321] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse1)
[    29.321] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    29.321] (II) No input driver specified, ignoring this device.
[    29.321] (II) This device may have been added with another device file.
[    29.321] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[    29.321] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[    29.321] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    29.321] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    29.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.321] (**) Logitech USB Keyboard: always reports core events
[    29.321] (**) Logitech USB Keyboard: Device: "/dev/input/event4"
[    29.322] (--) Logitech USB Keyboard: Found keys
[    29.322] (II) Logitech USB Keyboard: Configuring as keyboard
[    29.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4/event4"
[    29.322] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[    29.322] (**) Option "xkb_rules" "evdev"
[    29.322] (**) Option "xkb_model" "pc105+inet"
[    29.322] (**) Option "xkb_layout" "us"
[    29.322] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.323] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[    29.323] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[    29.323] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    29.323] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    29.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.323] (**) Logitech USB Keyboard: always reports core events
[    29.323] (**) Logitech USB Keyboard: Device: "/dev/input/event5"
[    29.323] (--) Logitech USB Keyboard: Found absolute axes
[    29.323] (--) Logitech USB Keyboard: Found keys
[    29.323] (II) Logitech USB Keyboard: Configuring as mouse
[    29.323] (II) Logitech USB Keyboard: Configuring as keyboard
[    29.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input5/event5"
[    29.323] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    29.323] (**) Option "xkb_rules" "evdev"
[    29.323] (**) Option "xkb_model" "pc105+inet"
[    29.323] (**) Option "xkb_layout" "us"
[    29.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.324] (II) Logitech USB Keyboard: initialized for absolute axes.
[    29.324] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[    29.324] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[    29.324] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[    29.324] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[    29.325] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event16)
[    29.325] (**) USB 2.0 Camera: Applying InputClass "system-keyboard"
[    29.325] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    29.325] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    29.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.325] (**) USB 2.0 Camera: always reports core events
[    29.325] (**) USB 2.0 Camera: Device: "/dev/input/event16"
[    29.325] (--) USB 2.0 Camera: Found keys
[    29.325] (II) USB 2.0 Camera: Configuring as keyboard
[    29.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input16/event16"
[    29.325] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 12)
[    29.325] (**) Option "xkb_rules" "evdev"
[    29.325] (**) Option "xkb_model" "pc105+inet"
[    29.325] (**) Option "xkb_layout" "us"
[    29.325] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    29.326] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
[    29.326] (II) No input driver specified, ignoring this device.
[    29.326] (II) This device may have been added with another device file.
[    29.326] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event11)
[    29.326] (II) No input driver specified, ignoring this device.
[    29.326] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event13)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.327] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event9)
[    29.327] (II) No input driver specified, ignoring this device.
[    29.327] (II) This device may have been added with another device file.
[    29.328] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    29.328] (II) No input driver specified, ignoring this device.
[    29.328] (II) This device may have been added with another device file.
[    29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "evdev tablet catchall"
[    29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "Wacom class"
[    29.343] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX eraser'
[    29.343] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    29.343] (**) Wacom Cintiq 12WX eraser: always reports core events
[    29.343] (**) Option "Device" "/dev/input/event3"
[    29.343] (**) Option "Type" "eraser"
[    29.343] (--) Wacom Cintiq 12WX eraser: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX eraser" (type: ERASER, id 13)
[    29.360] (**) Wacom Cintiq 12WX eraser: (accel) keeping acceleration scheme 1
[    29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration profile 0
[    29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration factor: 2.000
[    29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration threshold: 4
[    29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "evdev tablet catchall"
[    29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "Wacom class"
[    29.360] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX pad'
[    29.360] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    29.360] (**) Wacom Cintiq 12WX pad: always reports core events
[    29.360] (**) Option "Device" "/dev/input/event3"
[    29.360] (**) Option "Type" "pad"
[    29.360] (--) Wacom Cintiq 12WX pad: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX pad" (type: PAD, id 14)
[    29.360] (**) Wacom Cintiq 12WX pad: (accel) keeping acceleration scheme 1
[    29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration profile 0
[    29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration factor: 2.000
[    29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration threshold: 4
[    29.361] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    33.296] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    33.296] (II) fglrx(0): Using hsync ranges from config file
[    33.296] (II) fglrx(0): Using vrefresh ranges from config file
[    33.296] (II) fglrx(0): Printing DDC gathered Modelines:
[    33.296] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    33.296] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    33.296] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    33.296] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    33.296] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    33.296] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    33.296] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    33.296] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    33.296] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    33.296] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    33.296] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    33.296] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    33.296] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    33.296] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    33.296] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    33.296] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    33.296] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    33.296] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    33.296] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    33.296] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    33.296] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    33.296] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    33.296] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    33.743] (WW) fglrx(0): Cannot get updated TV attributes.
[    37.495] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    37.495] (II) fglrx(0): Using hsync ranges from config file
[    37.495] (II) fglrx(0): Using vrefresh ranges from config file
[    37.495] (II) fglrx(0): Printing DDC gathered Modelines:
[    37.495] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    37.495] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    37.495] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    37.495] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    37.495] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    37.495] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    37.495] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    37.495] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    37.495] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    37.495] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    37.495] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    37.495] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    37.495] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    37.495] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    37.495] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    37.495] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    37.495] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    37.495] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    37.495] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    37.495] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    37.495] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    37.495] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    37.495] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    37.863] (WW) fglrx(0): Cannot get updated TV attributes.
[  2788.466] (II) Power Button: Close
[  2788.466] (II) UnloadModule: "evdev"
[  2788.466] (II) Unloading evdev
[  2788.466] (II) Power Button: Close
[  2788.466] (II) UnloadModule: "evdev"
[  2788.466] (II) Unloading evdev
[  2788.466] (II) UnloadModule: "wacom"
[  2788.466] (II) Unloading wacom
[  2788.486] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Close
[  2788.486] (II) UnloadModule: "evdev"
[  2788.486] (II) Unloading evdev
[  2788.516] (II) Logitech USB Keyboard: Close
[  2788.516] (II) UnloadModule: "evdev"
[  2788.516] (II) Unloading evdev
[  2788.525] (II) Logitech USB Keyboard: Close
[  2788.525] (II) UnloadModule: "evdev"
[  2788.525] (II) Unloading evdev
[  2788.526] (II) USB 2.0 Camera: Close
[  2788.526] (II) UnloadModule: "evdev"
[  2788.526] (II) Unloading evdev
[  2788.526] (II) UnloadModule: "wacom"
[  2788.526] (II) Unloading wacom
[  2788.536] (II) UnloadModule: "wacom"
[  2788.536] (II) Unloading wacom
[  2788.539] (II) fglrx(0): Shutdown CMMQS
[  2788.546] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[  2788.546] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f541545b000
[  2788.565] (II) fglrx(0): Interrupt handler Shutdown.
[  2789.156] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  2789.156] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  2789.156] 
Fatal server error:
[  2789.156] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[  2789.156] 
[  2789.156] 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[  2789.156] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2789.156] 
[  2789.156] 
Backtrace:

Log: /var/log/Xorg.log (this one's generated [i believe] from me running '$ startx')

[    37.226] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    37.226] X Protocol Version 11, Revision 0
[    37.226] Build Operating System: Linux 3.3.7-1-ARCH x86_64 
[    37.226] Current Operating System: Linux philip-linux 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[    37.227] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cc87c822-7ff7-43c0-9d61-4770c2e40d0c ro nomodeset quiet
[    37.227] Build Date: 01 June 2012  05:44:06PM
[    37.227]  
[    37.227] Current version of pixman: 0.26.2
[    37.227] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    37.228] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    37.228] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  1 22:04:12 2012
[    37.279] (==) Using config file: "/etc/X11/xorg.conf"
[    37.280] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    37.335] (==) ServerLayout "aticonfig Layout"
[    37.335] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    37.335] (**) |   |-->Monitor "<default monitor>"
[    37.336] (**) |   |-->Device "aticonfig-Device[0]-0"
[    37.336] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
	Using a default monitor configuration.
[    37.336] (==) Automatically adding devices
[    37.336] (==) Automatically enabling devices
[    37.458] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    37.458] 	Entry deleted from font path.
[    37.460] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    37.460] 	Entry deleted from font path.
[    37.460] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    37.460] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    37.460] 	Entry deleted from font path.
[    37.460] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    37.460] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    37.460] (==) ModulePath set to "/usr/lib/xorg/modules"
[    37.460] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    37.460] (II) Loader magic: 0x7c7ae0
[    37.460] (II) Module ABI versions:
[    37.460] 	X.Org ANSI C Emulation: 0.4
[    37.460] 	X.Org Video Driver: 11.0
[    37.460] 	X.Org XInput driver : 13.0
[    37.460] 	X.Org Server Extension : 6.0
[    37.462] (--) PCI:*(0:1:0:0) 1002:9440:1043:01fc rev 0, Mem @ 0xd0000000/268435456, 0xfbef0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    37.462] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    37.462] (II) "extmod" will be loaded by default.
[    37.462] (II) "dbe" will be loaded by default.
[    37.462] (II) "glx" will be loaded by default.
[    37.462] (II) "record" will be loaded by default.
[    37.462] (II) "dri" will be loaded by default.
[    37.462] (II) "dri2" will be loaded by default.
[    37.462] (II) LoadModule: "extmod"
[    37.478] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    37.490] (II) Module extmod: vendor="X.Org Foundation"
[    37.490] 	compiled for 1.11.4, module version = 1.0.0
[    37.490] 	Module class: X.Org Server Extension
[    37.490] 	ABI class: X.Org Server Extension, version 6.0
[    37.490] (II) Loading extension MIT-SCREEN-SAVER
[    37.490] (II) Loading extension XFree86-VidModeExtension
[    37.490] (II) Loading extension XFree86-DGA
[    37.490] (II) Loading extension DPMS
[    37.490] (II) Loading extension XVideo
[    37.490] (II) Loading extension XVideo-MotionCompensation
[    37.490] (II) Loading extension X-Resource
[    37.490] (II) LoadModule: "dbe"
[    37.490] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    37.497] (II) Module dbe: vendor="X.Org Foundation"
[    37.497] 	compiled for 1.11.4, module version = 1.0.0
[    37.497] 	Module class: X.Org Server Extension
[    37.497] 	ABI class: X.Org Server Extension, version 6.0
[    37.497] (II) Loading extension DOUBLE-BUFFER
[    37.497] (II) LoadModule: "glx"
[    37.497] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    37.511] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    37.512] 	compiled for 6.9.0, module version = 1.0.0
[    37.512] (II) Loading extension GLX
[    37.512] (II) LoadModule: "record"
[    37.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    37.520] (II) Module record: vendor="X.Org Foundation"
[    37.520] 	compiled for 1.11.4, module version = 1.13.0
[    37.520] 	Module class: X.Org Server Extension
[    37.520] 	ABI class: X.Org Server Extension, version 6.0
[    37.520] (II) Loading extension RECORD
[    37.520] (II) LoadModule: "dri"
[    37.520] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    37.522] (II) Module dri: vendor="X.Org Foundation"
[    37.522] 	compiled for 1.11.4, module version = 1.0.0
[    37.522] 	ABI class: X.Org Server Extension, version 6.0
[    37.522] (II) Loading extension XFree86-DRI
[    37.522] (II) LoadModule: "dri2"
[    37.522] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    37.523] (II) Module dri2: vendor="X.Org Foundation"
[    37.523] 	compiled for 1.11.4, module version = 1.2.0
[    37.523] 	ABI class: X.Org Server Extension, version 6.0
[    37.523] (II) Loading extension DRI2
[    37.523] (II) LoadModule: "fglrx"
[    37.532] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    37.749] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    37.759] 	compiled for 1.4.99.906, module version = 8.97.2
[    37.759] 	Module class: X.Org Video Driver
[    37.761] (II) Loading sub module "fglrxdrm"
[    37.761] (II) LoadModule: "fglrxdrm"
[    37.761] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    37.771] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    37.771] 	compiled for 1.4.99.906, module version = 8.97.2
[    37.771] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    37.771] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3               
[    37.771] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30
[    37.771] (++) using VT number 1

[    37.771] (WW) Falling back to old probe method for fglrx
[    37.827] (II) Loading PCS database from /etc/ati/amdpcsdb
[    37.849] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    37.857] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    37.869] (II) AMD Video driver is signed
[    37.869] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    37.869] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    37.869] (II) fglrx(0): pEnt->device->identifier=0x981ed0
[    37.869] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    37.869] (II) Loading sub module "vgahw"
[    37.869] (II) LoadModule: "vgahw"
[    37.870] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    37.871] (II) Module vgahw: vendor="X.Org Foundation"
[    37.871] 	compiled for 1.11.4, module version = 0.1.0
[    37.871] 	ABI class: X.Org Video Driver, version 11.0
[    37.871] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    37.871] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    37.871] (==) fglrx(0): Default visual is TrueColor
[    37.871] (==) fglrx(0): RGB weight 888
[    37.871] (II) fglrx(0): Using 8 bits per RGB 
[    37.871] (==) fglrx(0): Buffer Tiling is ON
[    37.872] (II) Loading sub module "fglrxdrm"
[    37.872] (II) LoadModule: "fglrxdrm"
[    37.872] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    37.872] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    37.872] 	compiled for 1.4.99.906, module version = 8.97.2
[    37.876] ukiDynamicMajor: found major device number 250
[    37.876] ukiDynamicMajor: found major device number 250
[    37.876] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    37.876] ukiOpenDevice: node name is /dev/ati/card0
[    37.876] ukiOpenDevice: open result is 11, (OK)
[    37.876] ukiOpenByBusid: ukiOpenMinor returns 11
[    37.876] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    37.876] (**) fglrx(0): NoAccel = NO
[    37.876] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    37.877] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series        " (Chipset = 0x9440)
[    37.877] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01fc)
[    37.877] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    37.877] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[    37.877] (--) fglrx(0): MMIO registers at 0xfbef0000
[    37.877] (--) fglrx(0): I/O port at 0x0000d000
[    37.877] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    37.893] (II) fglrx(0): AC Adapter is used
[    37.918] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    37.921] (II) Loading sub module "vbe"
[    37.921] (II) LoadModule: "vbe"
[    37.921] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    37.924] (II) Module vbe: vendor="X.Org Foundation"
[    37.924] 	compiled for 1.11.4, module version = 1.1.0
[    37.924] 	ABI class: X.Org Video Driver, version 11.0
[    37.925] (II) fglrx(0): VESA BIOS detected
[    37.925] (II) fglrx(0): VESA VBE Version 3.0
[    37.925] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    37.925] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    37.925] (II) fglrx(0): VESA VBE OEM Software Rev: 11.7
[    37.925] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    37.925] (II) fglrx(0): VESA VBE OEM Product: RV770
[    37.925] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    37.964] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    37.964] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[    37.964] (II) fglrx(0): PCIE card detected
[    37.964] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    37.964] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    37.965] (II) fglrx(0): Using adapter: 1:0.0.
[    37.997] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    38.004] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[    38.004] (II) fglrx(0): RandR 1.2 support is enabled!
[    38.004] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    38.004] (==) fglrx(0): Center Mode is disabled 
[    38.004] (II) Loading sub module "fb"
[    38.004] (II) LoadModule: "fb"
[    38.004] (II) Loading /usr/lib/xorg/modules/libfb.so
[    38.015] (II) Module fb: vendor="X.Org Foundation"
[    38.015] 	compiled for 1.11.4, module version = 1.0.0
[    38.015] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.015] (II) Loading sub module "ddc"
[    38.015] (II) LoadModule: "ddc"
[    38.015] (II) Module "ddc" already built-in
[    38.859] (II) fglrx(0): Finished Initialize PPLIB!
[    38.877] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[    38.877] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    38.877] (**) fglrx(0): Option "Position" "0 0"
[    38.877] (**) fglrx(0): Option "Disable" "false"
[    38.877] (**) fglrx(0): Option "Rotate" "normal"
[    38.877] (**) fglrx(0): Option "TargetRefresh" "60"
[    38.877] (II) fglrx(0): Output DFP2 using monitor section 0-DFP2
[    38.877] (**) fglrx(0): Option "Position" "331 1080"
[    38.877] (**) fglrx(0): Option "Disable" "true"
[    38.877] (**) fglrx(0): Option "Rotate" "normal"
[    38.877] (**) fglrx(0): Option "TargetRefresh" "60"
[    38.877] (II) fglrx(0): Output CRT1 has no monitor section
[    38.877] (II) fglrx(0): Output CRT2 has no monitor section
[    38.877] (II) fglrx(0): Output TV has no monitor section
[    38.877] (II) fglrx(0): Output CV has no monitor section
[    38.877] (II) Loading sub module "ddc"
[    38.877] (II) LoadModule: "ddc"
[    38.877] (II) Module "ddc" already built-in
[    38.877] (II) fglrx(0): Connected Display0: DFP1
[    38.877] (II) fglrx(0): Display0 EDID data ---------------------------
[    38.877] (II) fglrx(0): Manufacturer: ACR  Model: 87  Serial#: 2435877271
[    38.877] (II) fglrx(0): Year: 2009  Week: 13
[    38.877] (II) fglrx(0): EDID Version: 1.3
[    38.877] (II) fglrx(0): Digital Display Input
[    38.877] (II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    38.877] (II) fglrx(0): Gamma: 2.20
[    38.877] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[    38.877] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    38.877] (II) fglrx(0): First detailed timing is preferred mode
[    38.877] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    38.877] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    38.877] (II) fglrx(0): Supported established timings:
[    38.877] (II) fglrx(0): 720x400@70Hz
[    38.877] (II) fglrx(0): 640x480@60Hz
[    38.877] (II) fglrx(0): 640x480@67Hz
[    38.878] (II) fglrx(0): 640x480@72Hz
[    38.878] (II) fglrx(0): 640x480@75Hz
[    38.878] (II) fglrx(0): 800x600@56Hz
[    38.878] (II) fglrx(0): 800x600@60Hz
[    38.878] (II) fglrx(0): 800x600@72Hz
[    38.878] (II) fglrx(0): 800x600@75Hz
[    38.878] (II) fglrx(0): 832x624@75Hz
[    38.878] (II) fglrx(0): 1024x768@60Hz
[    38.878] (II) fglrx(0): 1024x768@70Hz
[    38.878] (II) fglrx(0): 1024x768@75Hz
[    38.878] (II) fglrx(0): 1280x1024@75Hz
[    38.878] (II) fglrx(0): 1152x864@75Hz
[    38.878] (II) fglrx(0): Manufacturer's mask: 0
[    38.878] (II) fglrx(0): Supported standard timings:
[    38.878] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    38.878] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    38.878] (II) fglrx(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    38.878] (II) fglrx(0): #3: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    38.878] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    38.878] (II) fglrx(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    38.878] (II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    38.878] (II) fglrx(0): #7: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    38.878] (II) fglrx(0): Supported detailed timing:
[    38.878] (II) fglrx(0): clock: 138.5 MHz   Image Size:  531 x 299 mm
[    38.878] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    38.878] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0
[    38.878] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    38.878] (II) fglrx(0): Monitor name: H213H
[    38.878] (II) fglrx(0): Serial No: LF80D0028500
[    38.878] (II) fglrx(0): EDID (in hex):
[    38.878] (II) fglrx(0): 	00ffffffffffff000472870097893091
[    38.878] (II) fglrx(0): 	0d13010380301b78caee95a3544c9926
[    38.878] (II) fglrx(0): 	0f5054bfef80714f8180b300d1c09500
[    38.878] (II) fglrx(0): 	a940814081c01a3680a070381e403020
[    38.878] (II) fglrx(0): 	3500132b21000018000000fd00384c1f
[    38.878] (II) fglrx(0): 	5311000a202020202020000000fc0048
[    38.878] (II) fglrx(0): 	323133480a20202020202020000000ff
[    38.878] (II) fglrx(0): 	004c46383044303032383530300a001a
[    38.878] (II) fglrx(0): End of Display0 EDID data --------------------
[    38.878] (II) fglrx(0): Connected Display1: DFP2
[    38.878] (II) fglrx(0): Display1 EDID data ---------------------------
[    38.878] (II) fglrx(0): Manufacturer: WAC  Model: 1019  Serial#: 5284
[    38.878] (II) fglrx(0): Year: 2008  Week: 5
[    38.878] (II) fglrx(0): EDID Version: 1.3
[    38.878] (II) fglrx(0): Digital Display Input
[    38.878] (II) fglrx(0): DFP 1.x compatible TMDS
[    38.878] (II) fglrx(0): Max Image Size [cm]: horiz.: 27  vert.: 17
[    38.878] (II) fglrx(0): Gamma: 2.20
[    38.878] (II) fglrx(0): DPMS capabilities: StandBy Off
[    38.878] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    38.878] (II) fglrx(0): First detailed timing is preferred mode
[    38.878] (II) fglrx(0): redX: 0.589 redY: 0.341   greenX: 0.321 greenY: 0.535
[    38.878] (II) fglrx(0): blueX: 0.157 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    38.878] (II) fglrx(0): Supported established timings:
[    38.878] (II) fglrx(0): 720x400@70Hz
[    38.878] (II) fglrx(0): 640x480@60Hz
[    38.878] (II) fglrx(0): 640x480@75Hz
[    38.878] (II) fglrx(0): 800x600@60Hz
[    38.878] (II) fglrx(0): 800x600@72Hz
[    38.878] (II) fglrx(0): 800x600@75Hz
[    38.878] (II) fglrx(0): 832x624@75Hz
[    38.878] (II) fglrx(0): 1024x768@60Hz
[    38.878] (II) fglrx(0): 1024x768@70Hz
[    38.878] (II) fglrx(0): 1024x768@75Hz
[    38.878] (II) fglrx(0): Manufacturer's mask: 0
[    38.878] (II) fglrx(0): Supported standard timings:
[    38.878] (II) fglrx(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    38.878] (II) fglrx(0): Supported detailed timing:
[    38.878] (II) fglrx(0): clock: 83.4 MHz   Image Size:  261 x 163 mm
[    38.878] (II) fglrx(0): h_active: 1280  h_sync: 1480  h_sync_end 1616 h_blank_end 1680 h_border: 0
[    38.878] (II) fglrx(0): v_active: 800  v_sync: 824  v_sync_end 827 v_blanking: 828 v_border: 0
[    38.878] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[    38.878] (II) fglrx(0): Serial No: 8AC005284
[    38.878] (II) fglrx(0): Monitor name: Cintiq 12WX
[    38.878] (II) fglrx(0): EDID (in hex):
[    38.878] (II) fglrx(0): 	00ffffffffffff005c231910a4140000
[    38.878] (II) fglrx(0): 	05120103811b1178aad4459657528928
[    38.878] (II) fglrx(0): 	255054a5ee0081000101010101010101
[    38.878] (II) fglrx(0): 	0101010101019420009051201c30c888
[    38.878] (II) fglrx(0): 	830405a31000001e000000fd00384b1f
[    38.878] (II) fglrx(0): 	520e000a202020202020000000ff0038
[    38.878] (II) fglrx(0): 	414330303532383420202020000000fc
[    38.878] (II) fglrx(0): 	0043696e74697120313257580a200023
[    38.878] (II) fglrx(0): End of Display1 EDID data --------------------
[    39.178] (II) fglrx(0): EDID for output DFP1
[    39.178] (II) fglrx(0): Manufacturer: ACR  Model: 87  Serial#: 2435877271
[    39.178] (II) fglrx(0): Year: 2009  Week: 13
[    39.178] (II) fglrx(0): EDID Version: 1.3
[    39.178] (II) fglrx(0): Digital Display Input
[    39.178] (II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    39.178] (II) fglrx(0): Gamma: 2.20
[    39.178] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[    39.178] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    39.178] (II) fglrx(0): First detailed timing is preferred mode
[    39.178] (II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    39.178] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    39.178] (II) fglrx(0): Supported established timings:
[    39.178] (II) fglrx(0): 720x400@70Hz
[    39.178] (II) fglrx(0): 640x480@60Hz
[    39.178] (II) fglrx(0): 640x480@67Hz
[    39.178] (II) fglrx(0): 640x480@72Hz
[    39.178] (II) fglrx(0): 640x480@75Hz
[    39.178] (II) fglrx(0): 800x600@56Hz
[    39.178] (II) fglrx(0): 800x600@60Hz
[    39.178] (II) fglrx(0): 800x600@72Hz
[    39.178] (II) fglrx(0): 800x600@75Hz
[    39.178] (II) fglrx(0): 832x624@75Hz
[    39.178] (II) fglrx(0): 1024x768@60Hz
[    39.178] (II) fglrx(0): 1024x768@70Hz
[    39.178] (II) fglrx(0): 1024x768@75Hz
[    39.178] (II) fglrx(0): 1280x1024@75Hz
[    39.178] (II) fglrx(0): 1152x864@75Hz
[    39.178] (II) fglrx(0): Manufacturer's mask: 0
[    39.178] (II) fglrx(0): Supported standard timings:
[    39.178] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    39.178] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    39.178] (II) fglrx(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    39.178] (II) fglrx(0): #3: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    39.178] (II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    39.178] (II) fglrx(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    39.178] (II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    39.178] (II) fglrx(0): #7: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    39.178] (II) fglrx(0): Supported detailed timing:
[    39.178] (II) fglrx(0): clock: 138.5 MHz   Image Size:  531 x 299 mm
[    39.178] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    39.178] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1110 v_border: 0
[    39.178] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    39.178] (II) fglrx(0): Monitor name: H213H
[    39.178] (II) fglrx(0): Serial No: LF80D0028500
[    39.178] (II) fglrx(0): EDID (in hex):
[    39.178] (II) fglrx(0): 	00ffffffffffff000472870097893091
[    39.178] (II) fglrx(0): 	0d13010380301b78caee95a3544c9926
[    39.178] (II) fglrx(0): 	0f5054bfef80714f8180b300d1c09500
[    39.178] (II) fglrx(0): 	a940814081c01a3680a070381e403020
[    39.178] (II) fglrx(0): 	3500132b21000018000000fd00384c1f
[    39.178] (II) fglrx(0): 	5311000a202020202020000000fc0048
[    39.178] (II) fglrx(0): 	323133480a20202020202020000000ff
[    39.178] (II) fglrx(0): 	004c46383044303032383530300a001a
[    39.178] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    39.193] (II) fglrx(0): Using EDID range info for horizontal sync
[    39.193] (II) fglrx(0): Using EDID range info for vertical refresh
[    39.193] (II) fglrx(0): Printing DDC gathered Modelines:
[    39.193] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    39.193] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    39.193] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    39.193] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    39.193] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    39.193] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    39.193] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    39.193] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    39.193] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    39.193] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    39.193] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    39.193] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    39.193] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    39.193] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    39.193] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    39.193] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    39.193] (II) fglrx(0): Printing probed modes for output DFP1
[    39.193] (II) fglrx(0): Modeline "1920x1080"x60.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 +hsync +vsync (66.6 kHz)
[    39.193] (II) fglrx(0): Modeline "1776x1000"x60.0  147.05  1776 1880 2072 2368  1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[    39.193] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 -hsync -vsync (60.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[    39.193] (II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[    39.193] (II) fglrx(0): Modeline "1360x1024"x60.0  116.01  1360 1448 1592 1824  1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[    39.193] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync -vsync (55.9 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x960"x75.0  129.86  1280 1368 1504 1728  960 961 964 1002 +hsync -vsync (75.2 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x800"x75.0  107.21  1280 1360 1496 1712  800 801 804 835 +hsync -vsync (62.6 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
[    39.194] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 -hsync -vsync (67.5 kHz)
[    39.194] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x768"x75.0  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 -hsync -vsync (35.2 kHz)
[    39.194] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    39.194] (II) fglrx(0): EDID for output DFP2
[    39.194] (II) fglrx(0): Manufacturer: WAC  Model: 1019  Serial#: 5284
[    39.194] (II) fglrx(0): Year: 2008  Week: 5
[    39.194] (II) fglrx(0): EDID Version: 1.3
[    39.194] (II) fglrx(0): Digital Display Input
[    39.194] (II) fglrx(0): DFP 1.x compatible TMDS
[    39.194] (II) fglrx(0): Max Image Size [cm]: horiz.: 27  vert.: 17
[    39.194] (II) fglrx(0): Gamma: 2.20
[    39.194] (II) fglrx(0): DPMS capabilities: StandBy Off
[    39.194] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    39.194] (II) fglrx(0): First detailed timing is preferred mode
[    39.194] (II) fglrx(0): redX: 0.589 redY: 0.341   greenX: 0.321 greenY: 0.535
[    39.194] (II) fglrx(0): blueX: 0.157 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[    39.194] (II) fglrx(0): Supported established timings:
[    39.194] (II) fglrx(0): 720x400@70Hz
[    39.194] (II) fglrx(0): 640x480@60Hz
[    39.194] (II) fglrx(0): 640x480@75Hz
[    39.194] (II) fglrx(0): 800x600@60Hz
[    39.194] (II) fglrx(0): 800x600@72Hz
[    39.194] (II) fglrx(0): 800x600@75Hz
[    39.194] (II) fglrx(0): 832x624@75Hz
[    39.194] (II) fglrx(0): 1024x768@60Hz
[    39.194] (II) fglrx(0): 1024x768@70Hz
[    39.194] (II) fglrx(0): 1024x768@75Hz
[    39.194] (II) fglrx(0): Manufacturer's mask: 0
[    39.194] (II) fglrx(0): Supported standard timings:
[    39.194] (II) fglrx(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    39.194] (II) fglrx(0): Supported detailed timing:
[    39.194] (II) fglrx(0): clock: 83.4 MHz   Image Size:  261 x 163 mm
[    39.194] (II) fglrx(0): h_active: 1280  h_sync: 1480  h_sync_end 1616 h_blank_end 1680 h_border: 0
[    39.194] (II) fglrx(0): v_active: 800  v_sync: 824  v_sync_end 827 v_blanking: 828 v_border: 0
[    39.194] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[    39.194] (II) fglrx(0): Serial No: 8AC005284
[    39.194] (II) fglrx(0): Monitor name: Cintiq 12WX
[    39.194] (II) fglrx(0): EDID (in hex):
[    39.194] (II) fglrx(0): 	00ffffffffffff005c231910a4140000
[    39.194] (II) fglrx(0): 	05120103811b1178aad4459657528928
[    39.194] (II) fglrx(0): 	255054a5ee0081000101010101010101
[    39.194] (II) fglrx(0): 	0101010101019420009051201c30c888
[    39.194] (II) fglrx(0): 	830405a31000001e000000fd00384b1f
[    39.194] (II) fglrx(0): 	520e000a202020202020000000ff0038
[    39.194] (II) fglrx(0): 	414330303532383420202020000000fc
[    39.194] (II) fglrx(0): 	0043696e74697120313257580a200023
[    39.194] (II) fglrx(0): Printing probed modes for output DFP2
[    39.194] (II) fglrx(0): Modeline "1280x800"x60.0   83.40  1280 1480 1616 1680  800 824 827 828 -hsync -vsync (49.6 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    39.194] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    39.194] (II) fglrx(0): Modeline "1152x648"x60.0   59.90  1152 1200 1320 1488  648 649 652 671 +hsync -vsync (40.3 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
[    39.194] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 -hsync -vsync (48.1 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync -vsync (43.8 kHz)
[    39.194] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    39.194] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
[    39.194] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    39.194] (II) fglrx(0): EDID for output CRT1
[    39.194] (II) fglrx(0): EDID for output CRT2
[    39.194] (II) fglrx(0): EDID for output TV
[    39.194] (II) fglrx(0): EDID for output CV
[    39.194] (II) fglrx(0): Output DFP1 connected
[    39.194] (II) fglrx(0): Output DFP2 disabled by config file
[    39.194] (II) fglrx(0): Output CRT1 disconnected
[    39.194] (II) fglrx(0): Output CRT2 disconnected
[    39.194] (II) fglrx(0): Output TV disconnected
[    39.194] (II) fglrx(0): Output CV disconnected
[    39.194] (II) fglrx(0): Using user preference for initial modes
[    39.194] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[    39.194] (II) fglrx(0): Display dimensions: (480, 270) mm
[    39.194] (II) fglrx(0): DPI set to (101, 101)
[    39.194] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series         has 2 configurable heads and 2 displays connected.
[    39.194] (==) fglrx(0):  PseudoColor visuals disabled
[    39.194] (II) Loading sub module "ramdac"
[    39.194] (II) LoadModule: "ramdac"
[    39.194] (II) Module "ramdac" already built-in
[    39.194] (==) fglrx(0): NoDRI = NO
[    39.194] (==) fglrx(0): Capabilities: 0x00000000
[    39.194] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    39.194] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    39.194] (==) fglrx(0): UseFastTLS=0
[    39.194] (==) fglrx(0): BlockSignalsOnLock=1
[    39.194] (II) fglrx(0): Desktop Vsync is enabled.
[    39.194] (--) Depth 24 pixmap format is 32 bpp
[    39.195] (II) Loading extension ATIFGLRXDRI
[    39.195] (II) fglrx(0): doing swlDriScreenInit
[    39.195] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    39.195] ukiDynamicMajor: found major device number 250
[    39.195] ukiDynamicMajor: found major device number 250
[    39.195] ukiDynamicMajor: found major device number 250
[    39.195] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    39.195] ukiOpenDevice: node name is /dev/ati/card0
[    39.195] ukiOpenDevice: open result is 16, (OK)
[    39.195] ukiOpenByBusid: ukiOpenMinor returns 16
[    39.195] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    39.195] (II) fglrx(0): [uki] DRM interface version 1.0
[    39.195] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    39.195] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    39.195] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0a1c1d9000
[    39.195] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    39.195] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    39.195] (II) fglrx(0): swlDriScreenInit done
[    39.195] (II) fglrx(0): Kernel Module Version Information:
[    39.195] (II) fglrx(0):     Name: fglrx
[    39.195] (II) fglrx(0):     Version: 8.97.2
[    39.195] (II) fglrx(0):     Date: Jul  4 2012
[    39.195] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    39.195] (II) fglrx(0): Kernel Module version matches driver.
[    39.195] (II) fglrx(0): Kernel Module Build Time Information:
[    39.195] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.6.4-1-ARCH
[    39.195] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    39.195] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    39.195] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    39.195] (II) fglrx(0): [uki] register handle = 0x00004000
[    39.218] (II) fglrx(0): DRI initialization successfull
[    39.219] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[    39.220] (==) fglrx(0): Backing store disabled
[    39.220] (II) Loading extension FGLRXEXTENSION
[    39.221] (==) fglrx(0): DPMS enabled
[    39.221] (II) fglrx(0): Initialized in-driver Xinerama extension
[    39.221] (**) fglrx(0): Textured Video is enabled.
[    39.221] (II) LoadModule: "glesx"
[    39.221] (II) Loading /usr/lib/xorg/modules/glesx.so
[    39.347] (II) Module glesx: vendor="X.Org Foundation"
[    39.347] 	compiled for 1.4.99.906, module version = 1.0.0
[    39.347] (II) Loading extension GLESX
[    39.347] (II) fglrx(0): GLESX enableFlags = 528
[    39.358] (II) fglrx(0): GLESX is enabled
[    39.358] (II) LoadModule: "amdxmm"
[    39.358] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    39.368] (II) Module amdxmm: vendor="X.Org Foundation"
[    39.368] 	compiled for 1.4.99.906, module version = 2.0.0
[    39.368] (II) Loading extension AMDXVOPL
[    39.368] (II) Loading extension AMDXVBA
[    39.384] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    39.393] (II) fglrx(0): Enable composite support successfully
[    39.393] (II) fglrx(0): X context handle = 0x1
[    39.393] (II) fglrx(0): [DRI] installation complete
[    39.393] (==) fglrx(0): Silken mouse enabled
[    39.394] (==) fglrx(0): Using HW cursor of display infrastructure!
[    39.394] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    39.394] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[    39.394] (II) fglrx(0): Cannot set TV horizontal size.
[    39.394] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
[    39.394] (II) fglrx(0): Cannot set TV horizontal position.
[    39.394] (II) fglrx(0): Cannot set TV vertical position.
[    39.416] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[    39.494] (--) RandR disabled
[    39.494] (II) Initializing built-in extension Generic Event Extension
[    39.494] (II) Initializing built-in extension SHAPE
[    39.494] (II) Initializing built-in extension MIT-SHM
[    39.494] (II) Initializing built-in extension XInputExtension
[    39.494] (II) Initializing built-in extension XTEST
[    39.494] (II) Initializing built-in extension BIG-REQUESTS
[    39.494] (II) Initializing built-in extension SYNC
[    39.494] (II) Initializing built-in extension XKEYBOARD
[    39.494] (II) Initializing built-in extension XC-MISC
[    39.494] (II) Initializing built-in extension SECURITY
[    39.494] (II) Initializing built-in extension XINERAMA
[    39.494] (II) Initializing built-in extension XFIXES
[    39.494] (II) Initializing built-in extension RENDER
[    39.494] (II) Initializing built-in extension RANDR
[    39.494] (II) Initializing built-in extension COMPOSITE
[    39.494] (II) Initializing built-in extension DAMAGE
[    39.496] ukiDynamicMajor: found major device number 250
[    39.496] ukiDynamicMajor: found major device number 250
[    39.496] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    39.496] ukiOpenDevice: node name is /dev/ati/card0
[    39.496] ukiOpenDevice: open result is 17, (OK)
[    39.496] ukiOpenByBusid: ukiOpenMinor returns 17
[    39.496] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    40.169] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    40.287] (II) fglrx(0): Enable the clock gating!
[    40.325] (II) fglrx(0): Desktop Vsync is enabled.
[    40.325] (II) fglrx(0): Setting screen physical size to 508 x 285
[    40.599] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    40.599] (**) Power Button: Applying InputClass "system-keyboard"
[    40.599] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    40.599] (II) LoadModule: "evdev"
[    40.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.607] (II) Module evdev: vendor="X.Org Foundation"
[    40.607] 	compiled for 1.10.99.902, module version = 2.6.0
[    40.607] 	Module class: X.Org XInput Driver
[    40.607] 	ABI class: X.Org XInput driver, version 13.0
[    40.607] (II) Using input driver 'evdev' for 'Power Button'
[    40.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.607] (**) Power Button: always reports core events
[    40.607] (**) Power Button: Device: "/dev/input/event1"
[    40.607] (--) Power Button: Found keys
[    40.607] (II) Power Button: Configuring as keyboard
[    40.607] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    40.607] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    40.607] (**) Option "xkb_rules" "evdev"
[    40.607] (**) Option "xkb_model" "pc105+inet"
[    40.607] (**) Option "xkb_layout" "us"
[    40.607] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.644] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    40.644] (**) Power Button: Applying InputClass "system-keyboard"
[    40.644] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    40.644] (II) Using input driver 'evdev' for 'Power Button'
[    40.644] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.644] (**) Power Button: always reports core events
[    40.644] (**) Power Button: Device: "/dev/input/event0"
[    40.644] (--) Power Button: Found keys
[    40.644] (II) Power Button: Configuring as keyboard
[    40.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    40.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    40.644] (**) Option "xkb_rules" "evdev"
[    40.645] (**) Option "xkb_model" "pc105+inet"
[    40.645] (**) Option "xkb_layout" "us"
[    40.645] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.646] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[    40.646] (II) No input driver specified, ignoring this device.
[    40.646] (II) This device may have been added with another device file.
[    40.646] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/event3)
[    40.646] (**) Wacom Cintiq 12WX: Applying InputClass "evdev tablet catchall"
[    40.646] (**) Wacom Cintiq 12WX: Applying InputClass "Wacom class"
[    40.646] (II) LoadModule: "wacom"
[    40.646] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    40.651] (II) Module wacom: vendor="X.Org Foundation"
[    40.651] 	compiled for 1.11.3, module version = 0.13.0
[    40.651] 	Module class: X.Org XInput Driver
[    40.651] 	ABI class: X.Org XInput driver, version 13.0
[    40.651] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX'
[    40.651] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    40.651] (**) Wacom Cintiq 12WX: always reports core events
[    40.651] (**) Option "Device" "/dev/input/event3"
[    40.651] (II) Wacom Cintiq 12WX: type not specified, assuming 'stylus'.
[    40.651] (II) Wacom Cintiq 12WX: other types will be automatically added.
[    40.651] (--) Wacom Cintiq 12WX stylus: using pressure threshold of 27 for button 1
[    40.651] (--) Wacom Cintiq 12WX stylus: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    40.651] (II) Wacom Cintiq 12WX stylus: hotplugging dependent devices.
[    40.651] (EE) Wacom Cintiq 12WX stylus: Invalid type 'cursor' for this device.
[    40.651] (EE) Wacom Cintiq 12WX stylus: Invalid type 'touch' for this device.
[    40.651] (II) Wacom Cintiq 12WX stylus: hotplugging completed.
[    40.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    40.653] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX stylus" (type: STYLUS, id 8)
[    40.653] (**) Wacom Cintiq 12WX stylus: (accel) keeping acceleration scheme 1
[    40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration profile 0
[    40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration factor: 2.000
[    40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration threshold: 4
[    40.654] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/mouse0)
[    40.654] (II) No input driver specified, ignoring this device.
[    40.654] (II) This device may have been added with another device file.
[    40.654] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event5)
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[    40.654] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[    40.654] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event5"
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[    40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[    40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[    40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[    40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    40.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input5/event5"
[    40.654] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[    40.654] (**) Option "xkb_rules" "evdev"
[    40.654] (**) Option "xkb_model" "pc105+inet"
[    40.654] (**) Option "xkb_layout" "us"
[    40.654] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[    40.654] (WW) Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[    40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[    40.655] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[    40.655] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    40.655] (II) No input driver specified, ignoring this device.
[    40.655] (II) This device may have been added with another device file.
[    40.655] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse1)
[    40.655] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[    40.655] (II) No input driver specified, ignoring this device.
[    40.655] (II) This device may have been added with another device file.
[    40.655] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event6)
[    40.655] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[    40.655] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    40.655] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    40.655] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.655] (**) Logitech USB Keyboard: always reports core events
[    40.655] (**) Logitech USB Keyboard: Device: "/dev/input/event6"
[    40.655] (--) Logitech USB Keyboard: Found keys
[    40.655] (II) Logitech USB Keyboard: Configuring as keyboard
[    40.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input6/event6"
[    40.655] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[    40.655] (**) Option "xkb_rules" "evdev"
[    40.655] (**) Option "xkb_model" "pc105+inet"
[    40.655] (**) Option "xkb_layout" "us"
[    40.655] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.655] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[    40.655] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[    40.655] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    40.655] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[    40.655] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.655] (**) Logitech USB Keyboard: always reports core events
[    40.655] (**) Logitech USB Keyboard: Device: "/dev/input/event7"
[    40.655] (--) Logitech USB Keyboard: Found absolute axes
[    40.655] (--) Logitech USB Keyboard: Found keys
[    40.655] (II) Logitech USB Keyboard: Configuring as mouse
[    40.655] (II) Logitech USB Keyboard: Configuring as keyboard
[    40.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input7/event7"
[    40.656] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    40.656] (**) Option "xkb_rules" "evdev"
[    40.656] (**) Option "xkb_model" "pc105+inet"
[    40.656] (**) Option "xkb_layout" "us"
[    40.656] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.656] (II) Logitech USB Keyboard: initialized for absolute axes.
[    40.656] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[    40.656] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[    40.656] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[    40.656] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[    40.656] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event4)
[    40.656] (**) USB 2.0 Camera: Applying InputClass "system-keyboard"
[    40.656] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    40.656] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[    40.656] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    40.656] (**) USB 2.0 Camera: always reports core events
[    40.656] (**) USB 2.0 Camera: Device: "/dev/input/event4"
[    40.656] (--) USB 2.0 Camera: Found keys
[    40.656] (II) USB 2.0 Camera: Configuring as keyboard
[    40.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input4/event4"
[    40.656] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 12)
[    40.656] (**) Option "xkb_rules" "evdev"
[    40.656] (**) Option "xkb_model" "pc105+inet"
[    40.656] (**) Option "xkb_layout" "us"
[    40.656] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    40.657] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
[    40.657] (II) No input driver specified, ignoring this device.
[    40.657] (II) This device may have been added with another device file.
[    40.657] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event11)
[    40.657] (II) No input driver specified, ignoring this device.
[    40.657] (II) This device may have been added with another device file.
[    40.657] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[    40.657] (II) No input driver specified, ignoring this device.
[    40.657] (II) This device may have been added with another device file.
[    40.657] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event13)
[    40.657] (II) No input driver specified, ignoring this device.
[    40.657] (II) This device may have been added with another device file.
[    40.658] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event14)
[    40.658] (II) No input driver specified, ignoring this device.
[    40.658] (II) This device may have been added with another device file.
[    40.658] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event15)
[    40.658] (II) No input driver specified, ignoring this device.
[    40.658] (II) This device may have been added with another device file.
[    40.658] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[    40.658] (II) No input driver specified, ignoring this device.
[    40.658] (II) This device may have been added with another device file.
[    40.659] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event9)
[    40.659] (II) No input driver specified, ignoring this device.
[    40.659] (II) This device may have been added with another device file.
[    40.659] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    40.659] (II) No input driver specified, ignoring this device.
[    40.659] (II) This device may have been added with another device file.
[    40.675] (**) Wacom Cintiq 12WX eraser: Applying InputClass "evdev tablet catchall"
[    40.675] (**) Wacom Cintiq 12WX eraser: Applying InputClass "Wacom class"
[    40.675] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX eraser'
[    40.675] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    40.675] (**) Wacom Cintiq 12WX eraser: always reports core events
[    40.675] (**) Option "Device" "/dev/input/event3"
[    40.675] (**) Option "Type" "eraser"
[    40.675] (--) Wacom Cintiq 12WX eraser: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    40.693] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    40.693] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX eraser" (type: ERASER, id 13)
[    40.693] (**) Wacom Cintiq 12WX eraser: (accel) keeping acceleration scheme 1
[    40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration profile 0
[    40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration factor: 2.000
[    40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration threshold: 4
[    40.693] (**) Wacom Cintiq 12WX pad: Applying InputClass "evdev tablet catchall"
[    40.693] (**) Wacom Cintiq 12WX pad: Applying InputClass "Wacom class"
[    40.693] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX pad'
[    40.693] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    40.693] (**) Wacom Cintiq 12WX pad: always reports core events
[    40.693] (**) Option "Device" "/dev/input/event3"
[    40.693] (**) Option "Type" "pad"
[    40.693] (--) Wacom Cintiq 12WX pad: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000  tilt=enabled
[    40.693] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    40.693] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX pad" (type: PAD, id 14)
[    40.694] (**) Wacom Cintiq 12WX pad: (accel) keeping acceleration scheme 1
[    40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration profile 0
[    40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration factor: 2.000
[    40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration threshold: 4
[    40.694] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    44.944] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    44.944] (II) fglrx(0): Using hsync ranges from config file
[    44.944] (II) fglrx(0): Using vrefresh ranges from config file
[    44.944] (II) fglrx(0): Printing DDC gathered Modelines:
[    44.944] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    44.944] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    44.944] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    44.944] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    44.944] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    44.944] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    44.944] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    44.944] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    44.944] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    44.944] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    44.944] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    44.944] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    44.944] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    44.944] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    44.944] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    44.944] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    44.944] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    44.944] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    44.944] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    44.944] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    44.944] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    44.944] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    44.944] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    45.477] (WW) fglrx(0): Cannot get updated TV attributes.
[    49.557] (II) fglrx(0): EDID vendor "ACR", prod id 135
[    49.557] (II) fglrx(0): Using hsync ranges from config file
[    49.557] (II) fglrx(0): Using vrefresh ranges from config file
[    49.557] (II) fglrx(0): Printing DDC gathered Modelines:
[    49.557] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[    49.557] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    49.557] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    49.557] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    49.557] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    49.557] (II) fglrx(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    49.557] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    49.557] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    49.557] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    49.557] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    49.557] (II) fglrx(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    49.557] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    49.557] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    49.557] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    49.557] (II) fglrx(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    49.557] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    49.557] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    49.557] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    49.557] (II) fglrx(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    49.557] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz)
[    49.557] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    49.557] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    49.557] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[    50.548] (WW) fglrx(0): Cannot get updated TV attributes.

If you notice, the meaningful X errors in the first one are:

[  2789.156] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  2789.156] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  2789.156] 
Fatal server error:
[  2789.156] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[  2789.156] 
[  2789.156]

But I'm just coming up short as to how to fix them. Any help would be greatly appreciated.


ps. Right before I wiped my system and reinstalled Win8/ArchLinux, I was running a Arch Linux with Gnome Shell 3.4.2 successfully, and, when 3.6.1 was released, I upgraded to that. One of the reasons I wiped my system was because I could login to GDM after the upgrade. However the problem was different, GDM started just fine (I was using Grub Legacy and Initscript) and it would start to render the background, but then it would say "Something went wrong" and retry (forever). I was running the same Xorg and Catalyst version as well, so I'm thinking it's something to do with systemd and/or grub2 (I did have a Swap partition, but that's the only other variable I can think of)

Offline

#2 2012-11-02 03:24:26

kabbalah
Banned
Registered: 2011-08-23
Posts: 150

Re: GDM 3.6 wont start

Hello: My english is very bad.

But, look for is:

systemctl enable gdm.service.
system enable NetworkManager.service

Offline

#3 2012-11-02 15:20:11

PhilipWitte
Member
Registered: 2012-02-03
Posts: 45

Re: GDM 3.6 wont start

kabbalah wrote:

Hello: My english is very bad.

But, look for is:

systemctl enable gdm.service.
system enable NetworkManager.service

Both GDM an NetworkManager daemons have been started, that's not the problem. GDM fails to start due to Xorg errors.

I was going to post the results of "# journalctl", but Chromium constantly fails when I try to post it.

Offline

#4 2012-11-02 16:40:48

PhilipWitte
Member
Registered: 2012-02-03
Posts: 45

Re: GDM 3.6 wont start

The latest entry in the readout from "$ journalctl":

Nov 02 10:39:12 philip-linux pulseaudio[500]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.system
Nov 02 10:39:15 philip-linux pulseaudio[544]: [pulseaudio] pid.c: Daemon already running.
Nov 02 10:39:18 philip-linux goa[569]: goa-daemon version 3.6.0 starting [main.c:112, main()]
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1

and from "$ sudo journalctl":

...skipping...
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249 
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249 
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
...skipping...
Nov 02 10:39:18 philip-linux systemd[1]: Starting Disk Manager...
Nov 02 10:39:18 philip-linux udisksd[577]: udisks daemon version 2.0.0 starting
Nov 02 10:39:18 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux udisksd[577]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 02 10:39:18 philip-linux systemd[1]: Started Disk Manager.
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='acc
Nov 02 10:39:20 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.servi
Nov 02 10:39:20 philip-linux systemd[1]: Starting Accounts Service...
Nov 02 10:39:20 philip-linux accounts-daemon[598]: started daemon version 0.6.25
Nov 02 10:39:20 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249 
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249 
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)

Offline

#5 2012-11-02 16:55:22

PhilipWitte
Member
Registered: 2012-02-03
Posts: 45

Re: GDM 3.6 wont start

and the result of "$ sudo systemctl --all"

UNIT                                                   LOAD   ACTIVE   SUB       JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount                      loaded active   running       Arbitrary Executable File Formats File System Automount
dev-cdrom.device                                       loaded active   plugged       ASUS_DRW-2014S1T
dev-disk-by\x2did-ata\x2dASUS_DRW\x2d2014S1T.device    loaded active   plugged       ASUS_DRW-2014S1T
dev-disk-by\x2did-ata\x2dST3640323AS_5VK08QX9.device   loaded active   plugged       ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart1.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart2.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart3.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart4.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did..._2.0_FD_6E820B0B2944\x2d0:0.device loaded active   plugged       USB_2.0_FD
dev-disk-by\x2did-wwn\x2d0x5000c500141563f8.device     loaded active   plugged       ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart1.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart2.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart3.device loaded active   plugged       ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart4.device loaded active   plugged       ST3640323AS
dev-disk-by\x2dlabel-System\x5cx20Reserved.device      loaded active   plugged       ST3640323AS
dev-disk-by\x2dpa...d0:6:1.0\x2dscsi\x2d0:0:0:0.device loaded active   plugged       USB_2.0_FD
dev-disk-by\x2duu...2a4\x2da6f5\x2d484c32e4641f.device loaded active   plugged       ST3640323AS
dev-disk-by\x2duuid-82BED47FBED46D63.device            loaded active   plugged       ST3640323AS
dev-disk-by\x2duuid-9076D1D376D1BA64.device            loaded active   plugged       ST3640323AS
dev-disk-by\x2duu...3c0\x2d9d61\x2d4770c2e40d0c.device loaded active   plugged       ST3640323AS
dev-sda.device                                         loaded active   plugged       ST3640323AS
dev-sda1.device                                        loaded active   plugged       ST3640323AS
dev-sda2.device                                        loaded active   plugged       ST3640323AS
dev-sda3.device                                        loaded active   plugged       ST3640323AS
dev-sda4.device                                        loaded active   plugged       ST3640323AS
dev-sdb.device                                         loaded active   plugged       USB_2.0_FD
dev-sr0.device                                         loaded active   plugged       ASUS_DRW-2014S1T
dev-ttyS0.device                                       loaded active   plugged       /dev/ttyS0
dev-ttyS1.device                                       loaded active   plugged       /dev/ttyS1
dev-ttyS2.device                                       loaded active   plugged       /dev/ttyS2
dev-ttyS3.device                                       loaded active   plugged       /dev/ttyS3
sys-devices-pci00....0-0000:01:00.1-sound-card2.device loaded active   plugged       RV770 HDMI Audio [Radeon HD 4850/4870]
sys-devices-pci00...:06.0-0000:02:00.0-net-eth0.device loaded active   plugged       RTL8111/8168B PCI Express Gigabit Ethernet controller
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda1.device loaded active   plugged       ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda2.device loaded active   plugged       ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda3.device loaded active   plugged       ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda4.device loaded active   plugged       ST3640323AS
sys-devices-pci00...rget0:0:0-0:0:0:0-block-sda.device loaded active   plugged       ST3640323AS
sys-devices-pci00...rget2:0:0-2:0:0:0-block-sr0.device loaded active   plugged       ASUS_DRW-2014S1T
sys-devices-pci00...x2d1-1\x2d1:1.2-sound-card0.device loaded active   plugged       MSI Starcam Racer
sys-devices-pci00...rget6:0:0-6:0:0:0-block-sdb.device loaded active   plugged       USB_2.0_FD
sys-devices-pci0000:00-0000:00:14.2-sound-card1.device loaded active   plugged       SBx00 Azalia (Intel HDA)
sys-devices-platform-serial8250-tty-ttyS1.device       loaded active   plugged       /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device       loaded active   plugged       /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device       loaded active   plugged       /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:09-tty-ttyS0.device                loaded active   plugged       /sys/devices/pnp0/00:09/tty/ttyS0
sys-module-fuse.device                                 loaded active   plugged       /sys/module/fuse
sys-subsystem-net-devices-eth0.device                  loaded active   plugged       RTL8111/8168B PCI Express Gigabit Ethernet controller
...skipping...
systemd-sysctl.service                                 loaded active   exited        Apply Kernel Variables
systemd-tmpfiles-clean.service                         loaded inactive dead          Cleanup of Temporary Directories
systemd-tmpfiles-setup.service                         loaded active   exited        Recreate Volatile Files and Directories
systemd-udev-trigger.service                           loaded active   exited        udev Coldplug all Devices
systemd-udevd.service                                  loaded active   running       udev Kernel Device Manager
systemd-update-utmp-runlevel.service                   loaded inactive dead          Update UTMP about System Runlevel Changes
systemd-update-utmp-shutdown.service                   loaded inactive dead          Update UTMP about System Shutdown
systemd-user-sessions.service                          loaded active   exited        Permit User Sessions
systemd-vconsole-setup.service                         loaded active   exited        Setup Virtual Console
udisks2.service                                        loaded active   running       Disk Manager
upower.service                                         loaded active   running       Daemon for power management
winbindd.service                                       loaded failed   failed        Samba Winbind daemon
dbus.socket                                            loaded active   running       D-Bus System Message Bus Socket
syslog.socket                                          loaded inactive dead          Syslog Socket
systemd-initctl.socket                                 loaded active   listening     /dev/initctl Compatibility Named Pipe
systemd-journald.socket                                loaded active   running       Journal Socket
systemd-shutdownd.socket                               loaded active   listening     Delayed Shutdown Socket
systemd-udevd-control.socket                           loaded active   listening     udev Control Socket
systemd-udevd-kernel.socket                            loaded active   running       udev Kernel Socket
basic.target                                           loaded active   active        Basic System
cryptsetup.target                                      loaded active   active        Encrypted Volumes
emergency.target                                       loaded inactive dead          Emergency Mode
final.target                                           loaded inactive dead          Final Step
getty.target                                           loaded active   active        Login Prompts
graphical.target                                       loaded active   active        Graphical Interface
local-fs-pre.target                                    loaded active   active        Local File Systems (Pre)
local-fs.target                                        loaded active   active        Local File Systems
multi-user.target                                      loaded active   active        Multi-User
network.target                                         loaded active   active        Network
nss-user-lookup.target                                 loaded inactive dead          User and Group Name Lookups
remote-fs.target                                       loaded active   active        Remote File Systems
rescue.target                                          loaded inactive dead          Rescue Mode
shutdown.target                                        loaded inactive dead          Shutdown
sockets.target                                         loaded active   active        Sockets
sound.target                                           loaded active   active        Sound Card
swap.target                                            loaded active   active        Swap
sysinit.target                                         loaded active   active        System Initialization
syslog.target                                          loaded inactive dead          Syslog
umount.target                                          loaded inactive dead          Unmount All Filesystems
systemd-readahead-done.timer                           loaded inactive dead          Stop Read-Ahead Data Collection 10s After Completed Sta
systemd-tmpfiles-clean.timer                           loaded active   waiting       Daily Cleanup of Temporary Directories

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
JOB    = Pending job for the unit.

138 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.

Offline

#6 2012-11-04 02:45:05

PhilipWitte
Member
Registered: 2012-02-03
Posts: 45

Re: GDM 3.6 wont start

Post in association of this problem on AMD Bar 'n Grill:

https://bbs.archlinux.org/viewtopic.php … 7#p1187257


Looks like this is a special problem with Xorg 1.11, systemd, and GDM 3.6.x

Offline

Board footer

Powered by FluxBB