You are not logged in.
Pages: 1
I installed a brand new system two days ago, from the latest Arch ISO. I'm using Xorg 1.11 and Catalyst 12.6 from the official xorg111/hd234k repos. My DE is Gnome Shell 3.6.1. Arch is dual booted alongside Windows 8 (sda1/2 for Win8, sda3/4 for Arch, no Swap). The hardware is a AMD Phenome II x4 920, ATi HD Radeon 4870 512mb, and 8Gb of ram.
This is the first time I've tried to use both systemd and grub2. But so far all the help I've been able to get from the IRC has lead to dead-ends. As far as I know, I've read the docs very thoroughly and set everything up correctly, and everything does work perfectly except for GDM. Meaning if I put "exec gnome-session" in ~/.xinitrc and '$ startx' then Gnome Shell starts up and runs fine (though keyring doesn't remember my passwords).
Yes, I have set "nomodeset" in /etc/default/grub and generated Grub2 correctly
Yes, I have set up systemd correctly (hostname, locale, timezone, hwclock, kernel modules, etc). Like I said, everything works great in Gnome-Shell.
Yes, I have run "systemd enable gdm", but gdm fails to load, and while no error message display at boot (it just sits there after the "systemd-fsdisk : clean ... " message), disabling GDM then running it manually ("# gdm") says that Xorg failed to load, and to check the Xorg logs.
Well I've checked the Xorg logs, and the errors present don't return any useful results on Google... so I'm posting here in hope this isn't just some odd bug with my system specifically. The logs are as follows:
Log: /var/log/Xorg.log.old (this is the one generated [i believe] from running '# gdm')
[ 25.921]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 25.924] X Protocol Version 11, Revision 0
[ 25.925] Build Operating System: Linux 3.3.7-1-ARCH x86_64
[ 25.926] Current Operating System: Linux philip-linux 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[ 25.927] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cc87c822-7ff7-43c0-9d61-4770c2e40d0c ro nomodeset quiet
[ 25.928] Build Date: 01 June 2012 05:44:06PM
[ 25.929]
[ 25.930] Current version of pixman: 0.26.2
[ 25.931] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 25.934] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.938] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 1 21:11:33 2012
[ 25.999] (==) Using config file: "/etc/X11/xorg.conf"
[ 26.001] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.022] (==) ServerLayout "aticonfig Layout"
[ 26.022] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 26.022] (**) | |-->Monitor "<default monitor>"
[ 26.023] (**) | |-->Device "aticonfig-Device[0]-0"
[ 26.023] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 26.023] (==) Automatically adding devices
[ 26.023] (==) Automatically enabling devices
[ 26.136] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 26.136] Entry deleted from font path.
[ 26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 26.138] Entry deleted from font path.
[ 26.138] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 26.138] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 26.138] Entry deleted from font path.
[ 26.138] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 26.138] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 26.138] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.138] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.138] (II) Loader magic: 0x7c7ae0
[ 26.138] (II) Module ABI versions:
[ 26.138] X.Org ANSI C Emulation: 0.4
[ 26.138] X.Org Video Driver: 11.0
[ 26.138] X.Org XInput driver : 13.0
[ 26.138] X.Org Server Extension : 6.0
[ 26.140] (--) PCI:*(0:1:0:0) 1002:9440:1043:01fc rev 0, Mem @ 0xd0000000/268435456, 0xfbef0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 26.140] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.140] (II) "extmod" will be loaded by default.
[ 26.140] (II) "dbe" will be loaded by default.
[ 26.140] (II) "glx" will be loaded by default.
[ 26.140] (II) "record" will be loaded by default.
[ 26.140] (II) "dri" will be loaded by default.
[ 26.140] (II) "dri2" will be loaded by default.
[ 26.140] (II) LoadModule: "extmod"
[ 26.156] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.168] (II) Module extmod: vendor="X.Org Foundation"
[ 26.168] compiled for 1.11.4, module version = 1.0.0
[ 26.168] Module class: X.Org Server Extension
[ 26.168] ABI class: X.Org Server Extension, version 6.0
[ 26.168] (II) Loading extension MIT-SCREEN-SAVER
[ 26.168] (II) Loading extension XFree86-VidModeExtension
[ 26.168] (II) Loading extension XFree86-DGA
[ 26.168] (II) Loading extension DPMS
[ 26.168] (II) Loading extension XVideo
[ 26.168] (II) Loading extension XVideo-MotionCompensation
[ 26.168] (II) Loading extension X-Resource
[ 26.168] (II) LoadModule: "dbe"
[ 26.169] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.175] (II) Module dbe: vendor="X.Org Foundation"
[ 26.175] compiled for 1.11.4, module version = 1.0.0
[ 26.175] Module class: X.Org Server Extension
[ 26.175] ABI class: X.Org Server Extension, version 6.0
[ 26.175] (II) Loading extension DOUBLE-BUFFER
[ 26.175] (II) LoadModule: "glx"
[ 26.176] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.190] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 26.191] compiled for 6.9.0, module version = 1.0.0
[ 26.191] (II) Loading extension GLX
[ 26.191] (II) LoadModule: "record"
[ 26.191] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.198] (II) Module record: vendor="X.Org Foundation"
[ 26.198] compiled for 1.11.4, module version = 1.13.0
[ 26.198] Module class: X.Org Server Extension
[ 26.198] ABI class: X.Org Server Extension, version 6.0
[ 26.198] (II) Loading extension RECORD
[ 26.198] (II) LoadModule: "dri"
[ 26.198] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 26.201] (II) Module dri: vendor="X.Org Foundation"
[ 26.201] compiled for 1.11.4, module version = 1.0.0
[ 26.201] ABI class: X.Org Server Extension, version 6.0
[ 26.201] (II) Loading extension XFree86-DRI
[ 26.201] (II) LoadModule: "dri2"
[ 26.201] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.202] (II) Module dri2: vendor="X.Org Foundation"
[ 26.202] compiled for 1.11.4, module version = 1.2.0
[ 26.202] ABI class: X.Org Server Extension, version 6.0
[ 26.202] (II) Loading extension DRI2
[ 26.202] (II) LoadModule: "fglrx"
[ 26.210] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 26.441] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 26.455] compiled for 1.4.99.906, module version = 8.97.2
[ 26.455] Module class: X.Org Video Driver
[ 26.456] (II) Loading sub module "fglrxdrm"
[ 26.456] (II) LoadModule: "fglrxdrm"
[ 26.456] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.466] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 26.466] compiled for 1.4.99.906, module version = 8.97.2
[ 26.466] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 26.466] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 26.466] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 26.466] (++) using VT number 1
[ 26.467] (WW) Falling back to old probe method for fglrx
[ 26.506] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 26.520] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 26.527] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 26.528] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 26.528] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 26.539] (II) AMD Video driver is signed
[ 26.539] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 26.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.539] (II) fglrx(0): pEnt->device->identifier=0xaebed0
[ 26.540] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 26.540] (II) Loading sub module "vgahw"
[ 26.540] (II) LoadModule: "vgahw"
[ 26.540] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 26.541] (II) Module vgahw: vendor="X.Org Foundation"
[ 26.541] compiled for 1.11.4, module version = 0.1.0
[ 26.541] ABI class: X.Org Video Driver, version 11.0
[ 26.541] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 26.541] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.541] (==) fglrx(0): Default visual is TrueColor
[ 26.541] (==) fglrx(0): RGB weight 888
[ 26.541] (II) fglrx(0): Using 8 bits per RGB
[ 26.541] (==) fglrx(0): Buffer Tiling is ON
[ 26.542] (II) Loading sub module "fglrxdrm"
[ 26.542] (II) LoadModule: "fglrxdrm"
[ 26.543] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 26.543] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 26.543] compiled for 1.4.99.906, module version = 8.97.2
[ 26.546] ukiDynamicMajor: found major device number 251
[ 26.546] ukiDynamicMajor: found major device number 251
[ 26.546] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 26.546] ukiOpenDevice: node name is /dev/ati/card0
[ 26.546] ukiOpenDevice: open result is 11, (OK)
[ 26.546] ukiOpenByBusid: ukiOpenMinor returns 11
[ 26.546] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 26.546] (**) fglrx(0): NoAccel = NO
[ 26.546] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 26.546] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
[ 26.546] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01fc)
[ 26.546] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 26.546] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 26.546] (--) fglrx(0): MMIO registers at 0xfbef0000
[ 26.546] (--) fglrx(0): I/O port at 0x0000d000
[ 26.546] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 26.564] (II) fglrx(0): AC Adapter is used
[ 26.589] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 26.591] (II) Loading sub module "vbe"
[ 26.591] (II) LoadModule: "vbe"
[ 26.592] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 26.593] (II) Module vbe: vendor="X.Org Foundation"
[ 26.593] compiled for 1.11.4, module version = 1.1.0
[ 26.593] ABI class: X.Org Video Driver, version 11.0
[ 26.593] (II) fglrx(0): VESA BIOS detected
[ 26.593] (II) fglrx(0): VESA VBE Version 3.0
[ 26.593] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 26.593] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 26.593] (II) fglrx(0): VESA VBE OEM Software Rev: 11.7
[ 26.593] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 26.593] (II) fglrx(0): VESA VBE OEM Product: RV770
[ 26.593] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 26.631] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 26.632] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[ 26.632] (II) fglrx(0): PCIE card detected
[ 26.632] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 26.632] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 26.633] (II) fglrx(0): Using adapter: 1:0.0.
[ 26.665] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 26.672] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 26.672] (II) fglrx(0): RandR 1.2 support is enabled!
[ 26.672] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 26.672] (==) fglrx(0): Center Mode is disabled
[ 26.672] (II) Loading sub module "fb"
[ 26.672] (II) LoadModule: "fb"
[ 26.672] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.685] (II) Module fb: vendor="X.Org Foundation"
[ 26.685] compiled for 1.11.4, module version = 1.0.0
[ 26.685] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.685] (II) Loading sub module "ddc"
[ 26.685] (II) LoadModule: "ddc"
[ 26.685] (II) Module "ddc" already built-in
[ 27.457] (II) fglrx(0): Finished Initialize PPLIB!
[ 27.479] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[ 27.479] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[ 27.479] (**) fglrx(0): Option "Position" "0 0"
[ 27.479] (**) fglrx(0): Option "Disable" "false"
[ 27.479] (**) fglrx(0): Option "Rotate" "normal"
[ 27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[ 27.479] (II) fglrx(0): Output DFP2 using monitor section 0-DFP2
[ 27.479] (**) fglrx(0): Option "Position" "331 1080"
[ 27.479] (**) fglrx(0): Option "Disable" "true"
[ 27.479] (**) fglrx(0): Option "Rotate" "normal"
[ 27.479] (**) fglrx(0): Option "TargetRefresh" "60"
[ 27.479] (II) fglrx(0): Output CRT1 has no monitor section
[ 27.479] (II) fglrx(0): Output CRT2 has no monitor section
[ 27.479] (II) fglrx(0): Output TV has no monitor section
[ 27.479] (II) fglrx(0): Output CV has no monitor section
[ 27.479] (II) Loading sub module "ddc"
[ 27.479] (II) LoadModule: "ddc"
[ 27.479] (II) Module "ddc" already built-in
[ 27.479] (II) fglrx(0): Connected Display0: DFP1
[ 27.479] (II) fglrx(0): Display0 EDID data ---------------------------
[ 27.479] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 27.479] (II) fglrx(0): Year: 2009 Week: 13
[ 27.479] (II) fglrx(0): EDID Version: 1.3
[ 27.479] (II) fglrx(0): Digital Display Input
[ 27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 27.479] (II) fglrx(0): Gamma: 2.20
[ 27.479] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.479] (II) fglrx(0): First detailed timing is preferred mode
[ 27.479] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 27.479] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.479] (II) fglrx(0): Supported established timings:
[ 27.479] (II) fglrx(0): 720x400@70Hz
[ 27.479] (II) fglrx(0): 640x480@60Hz
[ 27.479] (II) fglrx(0): 640x480@67Hz
[ 27.479] (II) fglrx(0): 640x480@72Hz
[ 27.479] (II) fglrx(0): 640x480@75Hz
[ 27.479] (II) fglrx(0): 800x600@56Hz
[ 27.479] (II) fglrx(0): 800x600@60Hz
[ 27.479] (II) fglrx(0): 800x600@72Hz
[ 27.479] (II) fglrx(0): 800x600@75Hz
[ 27.479] (II) fglrx(0): 832x624@75Hz
[ 27.479] (II) fglrx(0): 1024x768@60Hz
[ 27.479] (II) fglrx(0): 1024x768@70Hz
[ 27.479] (II) fglrx(0): 1024x768@75Hz
[ 27.479] (II) fglrx(0): 1280x1024@75Hz
[ 27.479] (II) fglrx(0): 1152x864@75Hz
[ 27.479] (II) fglrx(0): Manufacturer's mask: 0
[ 27.479] (II) fglrx(0): Supported standard timings:
[ 27.479] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 27.479] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 27.479] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 27.479] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 27.479] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 27.479] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 27.479] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 27.479] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 27.479] (II) fglrx(0): Supported detailed timing:
[ 27.479] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 27.479] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 27.479] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 27.479] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 27.479] (II) fglrx(0): Monitor name: H213H
[ 27.479] (II) fglrx(0): Serial No: LF80D0028500
[ 27.479] (II) fglrx(0): EDID (in hex):
[ 27.479] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 27.479] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 27.479] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 27.479] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 27.479] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 27.479] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 27.479] (II) fglrx(0): 323133480a20202020202020000000ff
[ 27.479] (II) fglrx(0): 004c46383044303032383530300a001a
[ 27.479] (II) fglrx(0): End of Display0 EDID data --------------------
[ 27.479] (II) fglrx(0): Connected Display1: DFP2
[ 27.479] (II) fglrx(0): Display1 EDID data ---------------------------
[ 27.479] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 27.479] (II) fglrx(0): Year: 2008 Week: 5
[ 27.479] (II) fglrx(0): EDID Version: 1.3
[ 27.479] (II) fglrx(0): Digital Display Input
[ 27.479] (II) fglrx(0): DFP 1.x compatible TMDS
[ 27.479] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 27.479] (II) fglrx(0): Gamma: 2.20
[ 27.479] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 27.479] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.479] (II) fglrx(0): First detailed timing is preferred mode
[ 27.479] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 27.479] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 27.479] (II) fglrx(0): Supported established timings:
[ 27.479] (II) fglrx(0): 720x400@70Hz
[ 27.479] (II) fglrx(0): 640x480@60Hz
[ 27.479] (II) fglrx(0): 640x480@75Hz
[ 27.479] (II) fglrx(0): 800x600@60Hz
[ 27.479] (II) fglrx(0): 800x600@72Hz
[ 27.479] (II) fglrx(0): 800x600@75Hz
[ 27.479] (II) fglrx(0): 832x624@75Hz
[ 27.479] (II) fglrx(0): 1024x768@60Hz
[ 27.479] (II) fglrx(0): 1024x768@70Hz
[ 27.479] (II) fglrx(0): 1024x768@75Hz
[ 27.479] (II) fglrx(0): Manufacturer's mask: 0
[ 27.479] (II) fglrx(0): Supported standard timings:
[ 27.479] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 27.479] (II) fglrx(0): Supported detailed timing:
[ 27.479] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 27.479] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 27.479] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 27.479] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 27.479] (II) fglrx(0): Serial No: 8AC005284
[ 27.479] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 27.479] (II) fglrx(0): EDID (in hex):
[ 27.479] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 27.479] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 27.479] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 27.479] (II) fglrx(0): 0101010101019420009051201c30c888
[ 27.479] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 27.479] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 27.479] (II) fglrx(0): 414330303532383420202020000000fc
[ 27.479] (II) fglrx(0): 0043696e74697120313257580a200023
[ 27.479] (II) fglrx(0): End of Display1 EDID data --------------------
[ 27.767] (II) fglrx(0): EDID for output DFP1
[ 27.767] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 27.767] (II) fglrx(0): Year: 2009 Week: 13
[ 27.767] (II) fglrx(0): EDID Version: 1.3
[ 27.768] (II) fglrx(0): Digital Display Input
[ 27.768] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 27.768] (II) fglrx(0): Gamma: 2.20
[ 27.768] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 27.768] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.768] (II) fglrx(0): First detailed timing is preferred mode
[ 27.768] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 27.768] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 27.768] (II) fglrx(0): Supported established timings:
[ 27.768] (II) fglrx(0): 720x400@70Hz
[ 27.768] (II) fglrx(0): 640x480@60Hz
[ 27.768] (II) fglrx(0): 640x480@67Hz
[ 27.768] (II) fglrx(0): 640x480@72Hz
[ 27.768] (II) fglrx(0): 640x480@75Hz
[ 27.768] (II) fglrx(0): 800x600@56Hz
[ 27.768] (II) fglrx(0): 800x600@60Hz
[ 27.768] (II) fglrx(0): 800x600@72Hz
[ 27.768] (II) fglrx(0): 800x600@75Hz
[ 27.768] (II) fglrx(0): 832x624@75Hz
[ 27.768] (II) fglrx(0): 1024x768@60Hz
[ 27.768] (II) fglrx(0): 1024x768@70Hz
[ 27.768] (II) fglrx(0): 1024x768@75Hz
[ 27.768] (II) fglrx(0): 1280x1024@75Hz
[ 27.768] (II) fglrx(0): 1152x864@75Hz
[ 27.768] (II) fglrx(0): Manufacturer's mask: 0
[ 27.768] (II) fglrx(0): Supported standard timings:
[ 27.768] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 27.768] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 27.768] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 27.768] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 27.768] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 27.768] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 27.768] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 27.768] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 27.768] (II) fglrx(0): Supported detailed timing:
[ 27.768] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 27.768] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 27.768] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 27.768] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 27.768] (II) fglrx(0): Monitor name: H213H
[ 27.768] (II) fglrx(0): Serial No: LF80D0028500
[ 27.768] (II) fglrx(0): EDID (in hex):
[ 27.768] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 27.768] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 27.768] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 27.768] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 27.768] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 27.768] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 27.768] (II) fglrx(0): 323133480a20202020202020000000ff
[ 27.768] (II) fglrx(0): 004c46383044303032383530300a001a
[ 27.768] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 27.781] (II) fglrx(0): Using EDID range info for horizontal sync
[ 27.781] (II) fglrx(0): Using EDID range info for vertical refresh
[ 27.781] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 27.781] (II) fglrx(0): Printing probed modes for output DFP1
[ 27.781] (II) fglrx(0): Modeline "1920x1080"x60.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 +hsync +vsync (66.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1776x1000"x60.0 147.05 1776 1880 2072 2368 1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): EDID for output DFP2
[ 27.781] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 27.781] (II) fglrx(0): Year: 2008 Week: 5
[ 27.781] (II) fglrx(0): EDID Version: 1.3
[ 27.781] (II) fglrx(0): Digital Display Input
[ 27.781] (II) fglrx(0): DFP 1.x compatible TMDS
[ 27.781] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 27.781] (II) fglrx(0): Gamma: 2.20
[ 27.781] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 27.781] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 27.781] (II) fglrx(0): First detailed timing is preferred mode
[ 27.781] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 27.781] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 27.781] (II) fglrx(0): Supported established timings:
[ 27.781] (II) fglrx(0): 720x400@70Hz
[ 27.781] (II) fglrx(0): 640x480@60Hz
[ 27.781] (II) fglrx(0): 640x480@75Hz
[ 27.781] (II) fglrx(0): 800x600@60Hz
[ 27.781] (II) fglrx(0): 800x600@72Hz
[ 27.781] (II) fglrx(0): 800x600@75Hz
[ 27.781] (II) fglrx(0): 832x624@75Hz
[ 27.781] (II) fglrx(0): 1024x768@60Hz
[ 27.781] (II) fglrx(0): 1024x768@70Hz
[ 27.781] (II) fglrx(0): 1024x768@75Hz
[ 27.781] (II) fglrx(0): Manufacturer's mask: 0
[ 27.781] (II) fglrx(0): Supported standard timings:
[ 27.781] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 27.781] (II) fglrx(0): Supported detailed timing:
[ 27.781] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 27.781] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 27.781] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 27.781] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 27.781] (II) fglrx(0): Serial No: 8AC005284
[ 27.781] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 27.781] (II) fglrx(0): EDID (in hex):
[ 27.781] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 27.781] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 27.781] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 27.781] (II) fglrx(0): 0101010101019420009051201c30c888
[ 27.781] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 27.781] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 27.781] (II) fglrx(0): 414330303532383420202020000000fc
[ 27.781] (II) fglrx(0): 0043696e74697120313257580a200023
[ 27.781] (II) fglrx(0): Printing probed modes for output DFP2
[ 27.781] (II) fglrx(0): Modeline "1280x800"x60.0 83.40 1280 1480 1616 1680 800 824 827 828 -hsync -vsync (49.6 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 27.781] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 27.781] (II) fglrx(0): EDID for output CRT1
[ 27.781] (II) fglrx(0): EDID for output CRT2
[ 27.782] (II) fglrx(0): EDID for output TV
[ 27.782] (II) fglrx(0): EDID for output CV
[ 27.782] (II) fglrx(0): Output DFP1 connected
[ 27.782] (II) fglrx(0): Output DFP2 disabled by config file
[ 27.782] (II) fglrx(0): Output CRT1 disconnected
[ 27.782] (II) fglrx(0): Output CRT2 disconnected
[ 27.782] (II) fglrx(0): Output TV disconnected
[ 27.782] (II) fglrx(0): Output CV disconnected
[ 27.782] (II) fglrx(0): Using user preference for initial modes
[ 27.782] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[ 27.782] (II) fglrx(0): Display dimensions: (480, 270) mm
[ 27.782] (II) fglrx(0): DPI set to (101, 101)
[ 27.782] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 2 displays connected.
[ 27.782] (==) fglrx(0): PseudoColor visuals disabled
[ 27.782] (II) Loading sub module "ramdac"
[ 27.782] (II) LoadModule: "ramdac"
[ 27.782] (II) Module "ramdac" already built-in
[ 27.782] (==) fglrx(0): NoDRI = NO
[ 27.782] (==) fglrx(0): Capabilities: 0x00000000
[ 27.782] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 27.782] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 27.782] (==) fglrx(0): UseFastTLS=0
[ 27.782] (==) fglrx(0): BlockSignalsOnLock=1
[ 27.782] (II) fglrx(0): Desktop Vsync is enabled.
[ 27.782] (--) Depth 24 pixmap format is 32 bpp
[ 27.782] (II) Loading extension ATIFGLRXDRI
[ 27.782] (II) fglrx(0): doing swlDriScreenInit
[ 27.782] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiDynamicMajor: found major device number 251
[ 27.782] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 27.782] ukiOpenDevice: node name is /dev/ati/card0
[ 27.782] ukiOpenDevice: open result is 16, (OK)
[ 27.782] ukiOpenByBusid: ukiOpenMinor returns 16
[ 27.782] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 27.782] (II) fglrx(0): [uki] DRM interface version 1.0
[ 27.782] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 27.782] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 27.782] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f541545b000
[ 27.782] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 27.782] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 27.782] (II) fglrx(0): swlDriScreenInit done
[ 27.782] (II) fglrx(0): Kernel Module Version Information:
[ 27.782] (II) fglrx(0): Name: fglrx
[ 27.782] (II) fglrx(0): Version: 8.97.2
[ 27.782] (II) fglrx(0): Date: Jul 4 2012
[ 27.782] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 27.782] (II) fglrx(0): Kernel Module version matches driver.
[ 27.782] (II) fglrx(0): Kernel Module Build Time Information:
[ 27.782] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.6.4-1-ARCH
[ 27.782] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 27.782] (II) fglrx(0): Build-Kernel __SMP__: no
[ 27.782] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 27.782] (II) fglrx(0): [uki] register handle = 0x00004000
[ 27.799] (II) fglrx(0): DRI initialization successfull
[ 27.800] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 27.804] (==) fglrx(0): Backing store disabled
[ 27.804] (II) Loading extension FGLRXEXTENSION
[ 27.804] (==) fglrx(0): DPMS enabled
[ 27.804] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 27.804] (**) fglrx(0): Textured Video is enabled.
[ 27.804] (II) LoadModule: "glesx"
[ 27.805] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 27.934] (II) Module glesx: vendor="X.Org Foundation"
[ 27.934] compiled for 1.4.99.906, module version = 1.0.0
[ 27.934] (II) Loading extension GLESX
[ 27.934] (II) fglrx(0): GLESX enableFlags = 528
[ 27.945] (II) fglrx(0): GLESX is enabled
[ 27.945] (II) LoadModule: "amdxmm"
[ 27.945] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 27.955] (II) Module amdxmm: vendor="X.Org Foundation"
[ 27.955] compiled for 1.4.99.906, module version = 2.0.0
[ 27.955] (II) Loading extension AMDXVOPL
[ 27.955] (II) Loading extension AMDXVBA
[ 27.958] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 27.961] (II) fglrx(0): Enable composite support successfully
[ 27.961] (II) fglrx(0): X context handle = 0x1
[ 27.961] (II) fglrx(0): [DRI] installation complete
[ 27.961] (==) fglrx(0): Silken mouse enabled
[ 27.962] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 27.962] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 27.962] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 27.962] (II) fglrx(0): Cannot set TV horizontal size.
[ 27.962] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 27.962] (II) fglrx(0): Cannot set TV horizontal position.
[ 27.962] (II) fglrx(0): Cannot set TV vertical position.
[ 27.984] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[ 28.079] (--) RandR disabled
[ 28.079] (II) Initializing built-in extension Generic Event Extension
[ 28.079] (II) Initializing built-in extension SHAPE
[ 28.079] (II) Initializing built-in extension MIT-SHM
[ 28.079] (II) Initializing built-in extension XInputExtension
[ 28.079] (II) Initializing built-in extension XTEST
[ 28.079] (II) Initializing built-in extension BIG-REQUESTS
[ 28.079] (II) Initializing built-in extension SYNC
[ 28.079] (II) Initializing built-in extension XKEYBOARD
[ 28.079] (II) Initializing built-in extension XC-MISC
[ 28.079] (II) Initializing built-in extension SECURITY
[ 28.079] (II) Initializing built-in extension XINERAMA
[ 28.079] (II) Initializing built-in extension XFIXES
[ 28.079] (II) Initializing built-in extension RENDER
[ 28.079] (II) Initializing built-in extension RANDR
[ 28.079] (II) Initializing built-in extension COMPOSITE
[ 28.079] (II) Initializing built-in extension DAMAGE
[ 28.081] ukiDynamicMajor: found major device number 251
[ 28.081] ukiDynamicMajor: found major device number 251
[ 28.081] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 28.081] ukiOpenDevice: node name is /dev/ati/card0
[ 28.081] ukiOpenDevice: open result is 17, (OK)
[ 28.081] ukiOpenByBusid: ukiOpenMinor returns 17
[ 28.081] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 28.808] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 28.932] (II) fglrx(0): Enable the clock gating!
[ 28.977] (II) fglrx(0): Desktop Vsync is enabled.
[ 28.977] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 29.247] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 29.247] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.247] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.247] (II) LoadModule: "evdev"
[ 29.247] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.261] (II) Module evdev: vendor="X.Org Foundation"
[ 29.261] compiled for 1.10.99.902, module version = 2.6.0
[ 29.261] Module class: X.Org XInput Driver
[ 29.261] ABI class: X.Org XInput driver, version 13.0
[ 29.261] (II) Using input driver 'evdev' for 'Power Button'
[ 29.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.261] (**) Power Button: always reports core events
[ 29.261] (**) Power Button: Device: "/dev/input/event1"
[ 29.261] (--) Power Button: Found keys
[ 29.261] (II) Power Button: Configuring as keyboard
[ 29.261] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 29.261] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.261] (**) Option "xkb_rules" "evdev"
[ 29.261] (**) Option "xkb_model" "pc105+inet"
[ 29.261] (**) Option "xkb_layout" "us"
[ 29.261] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.305] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 29.305] (**) Power Button: Applying InputClass "system-keyboard"
[ 29.305] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.305] (II) Using input driver 'evdev' for 'Power Button'
[ 29.305] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.306] (**) Power Button: always reports core events
[ 29.306] (**) Power Button: Device: "/dev/input/event0"
[ 29.306] (--) Power Button: Found keys
[ 29.306] (II) Power Button: Configuring as keyboard
[ 29.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 29.306] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 29.306] (**) Option "xkb_rules" "evdev"
[ 29.306] (**) Option "xkb_model" "pc105+inet"
[ 29.306] (**) Option "xkb_layout" "us"
[ 29.306] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.307] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[ 29.307] (II) No input driver specified, ignoring this device.
[ 29.307] (II) This device may have been added with another device file.
[ 29.308] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/event3)
[ 29.308] (**) Wacom Cintiq 12WX: Applying InputClass "evdev tablet catchall"
[ 29.308] (**) Wacom Cintiq 12WX: Applying InputClass "Wacom class"
[ 29.308] (II) LoadModule: "wacom"
[ 29.308] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.313] (II) Module wacom: vendor="X.Org Foundation"
[ 29.313] compiled for 1.11.3, module version = 0.13.0
[ 29.313] Module class: X.Org XInput Driver
[ 29.313] ABI class: X.Org XInput driver, version 13.0
[ 29.313] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX'
[ 29.313] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.313] (**) Wacom Cintiq 12WX: always reports core events
[ 29.313] (**) Option "Device" "/dev/input/event3"
[ 29.314] (II) Wacom Cintiq 12WX: type not specified, assuming 'stylus'.
[ 29.314] (II) Wacom Cintiq 12WX: other types will be automatically added.
[ 29.314] (--) Wacom Cintiq 12WX stylus: using pressure threshold of 27 for button 1
[ 29.314] (--) Wacom Cintiq 12WX stylus: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.314] (II) Wacom Cintiq 12WX stylus: hotplugging dependent devices.
[ 29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'cursor' for this device.
[ 29.314] (EE) Wacom Cintiq 12WX stylus: Invalid type 'touch' for this device.
[ 29.314] (II) Wacom Cintiq 12WX stylus: hotplugging completed.
[ 29.315] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.315] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX stylus" (type: STYLUS, id 8)
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) keeping acceleration scheme 1
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration profile 0
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration factor: 2.000
[ 29.316] (**) Wacom Cintiq 12WX stylus: (accel) acceleration threshold: 4
[ 29.317] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/mouse0)
[ 29.317] (II) No input driver specified, ignoring this device.
[ 29.317] (II) This device may have been added with another device file.
[ 29.317] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event6)
[ 29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.317] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.318] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[ 29.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event6"
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[ 29.318] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[ 29.318] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[ 29.318] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.318] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input6/event6"
[ 29.318] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[ 29.318] (**) Option "xkb_rules" "evdev"
[ 29.318] (**) Option "xkb_model" "pc105+inet"
[ 29.318] (**) Option "xkb_layout" "us"
[ 29.318] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.319] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[ 29.319] (WW) Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[ 29.319] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[ 29.320] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[ 29.320] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.320] (II) No input driver specified, ignoring this device.
[ 29.320] (II) This device may have been added with another device file.
[ 29.321] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse1)
[ 29.321] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 29.321] (II) No input driver specified, ignoring this device.
[ 29.321] (II) This device may have been added with another device file.
[ 29.321] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event4)
[ 29.321] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 29.321] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.321] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 29.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.321] (**) Logitech USB Keyboard: always reports core events
[ 29.321] (**) Logitech USB Keyboard: Device: "/dev/input/event4"
[ 29.322] (--) Logitech USB Keyboard: Found keys
[ 29.322] (II) Logitech USB Keyboard: Configuring as keyboard
[ 29.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4/event4"
[ 29.322] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 29.322] (**) Option "xkb_rules" "evdev"
[ 29.322] (**) Option "xkb_model" "pc105+inet"
[ 29.322] (**) Option "xkb_layout" "us"
[ 29.322] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.323] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event5)
[ 29.323] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 29.323] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.323] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 29.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.323] (**) Logitech USB Keyboard: always reports core events
[ 29.323] (**) Logitech USB Keyboard: Device: "/dev/input/event5"
[ 29.323] (--) Logitech USB Keyboard: Found absolute axes
[ 29.323] (--) Logitech USB Keyboard: Found keys
[ 29.323] (II) Logitech USB Keyboard: Configuring as mouse
[ 29.323] (II) Logitech USB Keyboard: Configuring as keyboard
[ 29.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input5/event5"
[ 29.323] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 29.323] (**) Option "xkb_rules" "evdev"
[ 29.323] (**) Option "xkb_model" "pc105+inet"
[ 29.323] (**) Option "xkb_layout" "us"
[ 29.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.324] (II) Logitech USB Keyboard: initialized for absolute axes.
[ 29.324] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 29.324] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 29.325] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event16)
[ 29.325] (**) USB 2.0 Camera: Applying InputClass "system-keyboard"
[ 29.325] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 29.325] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 29.325] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.325] (**) USB 2.0 Camera: always reports core events
[ 29.325] (**) USB 2.0 Camera: Device: "/dev/input/event16"
[ 29.325] (--) USB 2.0 Camera: Found keys
[ 29.325] (II) USB 2.0 Camera: Configuring as keyboard
[ 29.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input16/event16"
[ 29.325] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 12)
[ 29.325] (**) Option "xkb_rules" "evdev"
[ 29.325] (**) Option "xkb_model" "pc105+inet"
[ 29.325] (**) Option "xkb_layout" "us"
[ 29.325] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 29.326] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
[ 29.326] (II) No input driver specified, ignoring this device.
[ 29.326] (II) This device may have been added with another device file.
[ 29.326] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event11)
[ 29.326] (II) No input driver specified, ignoring this device.
[ 29.326] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event13)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.327] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event9)
[ 29.327] (II) No input driver specified, ignoring this device.
[ 29.327] (II) This device may have been added with another device file.
[ 29.328] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 29.328] (II) No input driver specified, ignoring this device.
[ 29.328] (II) This device may have been added with another device file.
[ 29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "evdev tablet catchall"
[ 29.343] (**) Wacom Cintiq 12WX eraser: Applying InputClass "Wacom class"
[ 29.343] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX eraser'
[ 29.343] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.343] (**) Wacom Cintiq 12WX eraser: always reports core events
[ 29.343] (**) Option "Device" "/dev/input/event3"
[ 29.343] (**) Option "Type" "eraser"
[ 29.343] (--) Wacom Cintiq 12WX eraser: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX eraser" (type: ERASER, id 13)
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) keeping acceleration scheme 1
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration profile 0
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration factor: 2.000
[ 29.360] (**) Wacom Cintiq 12WX eraser: (accel) acceleration threshold: 4
[ 29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "evdev tablet catchall"
[ 29.360] (**) Wacom Cintiq 12WX pad: Applying InputClass "Wacom class"
[ 29.360] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX pad'
[ 29.360] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 29.360] (**) Wacom Cintiq 12WX pad: always reports core events
[ 29.360] (**) Option "Device" "/dev/input/event3"
[ 29.360] (**) Option "Type" "pad"
[ 29.360] (--) Wacom Cintiq 12WX pad: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 29.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 29.360] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX pad" (type: PAD, id 14)
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) keeping acceleration scheme 1
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration profile 0
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration factor: 2.000
[ 29.360] (**) Wacom Cintiq 12WX pad: (accel) acceleration threshold: 4
[ 29.361] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 33.296] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 33.296] (II) fglrx(0): Using hsync ranges from config file
[ 33.296] (II) fglrx(0): Using vrefresh ranges from config file
[ 33.296] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33.296] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.296] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 33.296] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 33.296] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 33.296] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 33.296] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 33.296] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.296] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 33.743] (WW) fglrx(0): Cannot get updated TV attributes.
[ 37.495] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 37.495] (II) fglrx(0): Using hsync ranges from config file
[ 37.495] (II) fglrx(0): Using vrefresh ranges from config file
[ 37.495] (II) fglrx(0): Printing DDC gathered Modelines:
[ 37.495] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 37.495] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 37.495] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 37.495] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 37.495] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 37.495] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 37.495] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 37.495] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 37.863] (WW) fglrx(0): Cannot get updated TV attributes.
[ 2788.466] (II) Power Button: Close
[ 2788.466] (II) UnloadModule: "evdev"
[ 2788.466] (II) Unloading evdev
[ 2788.466] (II) Power Button: Close
[ 2788.466] (II) UnloadModule: "evdev"
[ 2788.466] (II) Unloading evdev
[ 2788.466] (II) UnloadModule: "wacom"
[ 2788.466] (II) Unloading wacom
[ 2788.486] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Close
[ 2788.486] (II) UnloadModule: "evdev"
[ 2788.486] (II) Unloading evdev
[ 2788.516] (II) Logitech USB Keyboard: Close
[ 2788.516] (II) UnloadModule: "evdev"
[ 2788.516] (II) Unloading evdev
[ 2788.525] (II) Logitech USB Keyboard: Close
[ 2788.525] (II) UnloadModule: "evdev"
[ 2788.525] (II) Unloading evdev
[ 2788.526] (II) USB 2.0 Camera: Close
[ 2788.526] (II) UnloadModule: "evdev"
[ 2788.526] (II) Unloading evdev
[ 2788.526] (II) UnloadModule: "wacom"
[ 2788.526] (II) Unloading wacom
[ 2788.536] (II) UnloadModule: "wacom"
[ 2788.536] (II) Unloading wacom
[ 2788.539] (II) fglrx(0): Shutdown CMMQS
[ 2788.546] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2788.546] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f541545b000
[ 2788.565] (II) fglrx(0): Interrupt handler Shutdown.
[ 2789.156] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 2789.156] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 2789.156]
Fatal server error:
[ 2789.156] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 2789.156]
[ 2789.156]
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 2789.156] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2789.156]
[ 2789.156]
Backtrace:
Log: /var/log/Xorg.log (this one's generated [i believe] from me running '$ startx')
[ 37.226]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 37.226] X Protocol Version 11, Revision 0
[ 37.226] Build Operating System: Linux 3.3.7-1-ARCH x86_64
[ 37.226] Current Operating System: Linux philip-linux 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[ 37.227] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cc87c822-7ff7-43c0-9d61-4770c2e40d0c ro nomodeset quiet
[ 37.227] Build Date: 01 June 2012 05:44:06PM
[ 37.227]
[ 37.227] Current version of pixman: 0.26.2
[ 37.227] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 37.228] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.228] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 1 22:04:12 2012
[ 37.279] (==) Using config file: "/etc/X11/xorg.conf"
[ 37.280] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.335] (==) ServerLayout "aticonfig Layout"
[ 37.335] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 37.335] (**) | |-->Monitor "<default monitor>"
[ 37.336] (**) | |-->Device "aticonfig-Device[0]-0"
[ 37.336] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 37.336] (==) Automatically adding devices
[ 37.336] (==) Automatically enabling devices
[ 37.458] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 37.458] Entry deleted from font path.
[ 37.460] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 37.460] Entry deleted from font path.
[ 37.460] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 37.460] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 37.460] Entry deleted from font path.
[ 37.460] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 37.460] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 37.460] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 37.460] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 37.460] (II) Loader magic: 0x7c7ae0
[ 37.460] (II) Module ABI versions:
[ 37.460] X.Org ANSI C Emulation: 0.4
[ 37.460] X.Org Video Driver: 11.0
[ 37.460] X.Org XInput driver : 13.0
[ 37.460] X.Org Server Extension : 6.0
[ 37.462] (--) PCI:*(0:1:0:0) 1002:9440:1043:01fc rev 0, Mem @ 0xd0000000/268435456, 0xfbef0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 37.462] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 37.462] (II) "extmod" will be loaded by default.
[ 37.462] (II) "dbe" will be loaded by default.
[ 37.462] (II) "glx" will be loaded by default.
[ 37.462] (II) "record" will be loaded by default.
[ 37.462] (II) "dri" will be loaded by default.
[ 37.462] (II) "dri2" will be loaded by default.
[ 37.462] (II) LoadModule: "extmod"
[ 37.478] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 37.490] (II) Module extmod: vendor="X.Org Foundation"
[ 37.490] compiled for 1.11.4, module version = 1.0.0
[ 37.490] Module class: X.Org Server Extension
[ 37.490] ABI class: X.Org Server Extension, version 6.0
[ 37.490] (II) Loading extension MIT-SCREEN-SAVER
[ 37.490] (II) Loading extension XFree86-VidModeExtension
[ 37.490] (II) Loading extension XFree86-DGA
[ 37.490] (II) Loading extension DPMS
[ 37.490] (II) Loading extension XVideo
[ 37.490] (II) Loading extension XVideo-MotionCompensation
[ 37.490] (II) Loading extension X-Resource
[ 37.490] (II) LoadModule: "dbe"
[ 37.490] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 37.497] (II) Module dbe: vendor="X.Org Foundation"
[ 37.497] compiled for 1.11.4, module version = 1.0.0
[ 37.497] Module class: X.Org Server Extension
[ 37.497] ABI class: X.Org Server Extension, version 6.0
[ 37.497] (II) Loading extension DOUBLE-BUFFER
[ 37.497] (II) LoadModule: "glx"
[ 37.497] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 37.511] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 37.512] compiled for 6.9.0, module version = 1.0.0
[ 37.512] (II) Loading extension GLX
[ 37.512] (II) LoadModule: "record"
[ 37.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 37.520] (II) Module record: vendor="X.Org Foundation"
[ 37.520] compiled for 1.11.4, module version = 1.13.0
[ 37.520] Module class: X.Org Server Extension
[ 37.520] ABI class: X.Org Server Extension, version 6.0
[ 37.520] (II) Loading extension RECORD
[ 37.520] (II) LoadModule: "dri"
[ 37.520] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 37.522] (II) Module dri: vendor="X.Org Foundation"
[ 37.522] compiled for 1.11.4, module version = 1.0.0
[ 37.522] ABI class: X.Org Server Extension, version 6.0
[ 37.522] (II) Loading extension XFree86-DRI
[ 37.522] (II) LoadModule: "dri2"
[ 37.522] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.523] (II) Module dri2: vendor="X.Org Foundation"
[ 37.523] compiled for 1.11.4, module version = 1.2.0
[ 37.523] ABI class: X.Org Server Extension, version 6.0
[ 37.523] (II) Loading extension DRI2
[ 37.523] (II) LoadModule: "fglrx"
[ 37.532] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 37.749] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 37.759] compiled for 1.4.99.906, module version = 8.97.2
[ 37.759] Module class: X.Org Video Driver
[ 37.761] (II) Loading sub module "fglrxdrm"
[ 37.761] (II) LoadModule: "fglrxdrm"
[ 37.761] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.771] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 37.771] compiled for 1.4.99.906, module version = 8.97.2
[ 37.771] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 37.771] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 37.771] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 37.771] (++) using VT number 1
[ 37.771] (WW) Falling back to old probe method for fglrx
[ 37.827] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 37.849] (--) Chipset Supported AMD Graphics Processor (0x9440) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 37.857] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 37.857] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 37.869] (II) AMD Video driver is signed
[ 37.869] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 37.869] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.869] (II) fglrx(0): pEnt->device->identifier=0x981ed0
[ 37.869] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 37.869] (II) Loading sub module "vgahw"
[ 37.869] (II) LoadModule: "vgahw"
[ 37.870] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 37.871] (II) Module vgahw: vendor="X.Org Foundation"
[ 37.871] compiled for 1.11.4, module version = 0.1.0
[ 37.871] ABI class: X.Org Video Driver, version 11.0
[ 37.871] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 37.871] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 37.871] (==) fglrx(0): Default visual is TrueColor
[ 37.871] (==) fglrx(0): RGB weight 888
[ 37.871] (II) fglrx(0): Using 8 bits per RGB
[ 37.871] (==) fglrx(0): Buffer Tiling is ON
[ 37.872] (II) Loading sub module "fglrxdrm"
[ 37.872] (II) LoadModule: "fglrxdrm"
[ 37.872] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 37.872] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 37.872] compiled for 1.4.99.906, module version = 8.97.2
[ 37.876] ukiDynamicMajor: found major device number 250
[ 37.876] ukiDynamicMajor: found major device number 250
[ 37.876] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 37.876] ukiOpenDevice: node name is /dev/ati/card0
[ 37.876] ukiOpenDevice: open result is 11, (OK)
[ 37.876] ukiOpenByBusid: ukiOpenMinor returns 11
[ 37.876] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.876] (**) fglrx(0): NoAccel = NO
[ 37.876] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 37.877] (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9440)
[ 37.877] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01fc)
[ 37.877] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 37.877] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 37.877] (--) fglrx(0): MMIO registers at 0xfbef0000
[ 37.877] (--) fglrx(0): I/O port at 0x0000d000
[ 37.877] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 37.893] (II) fglrx(0): AC Adapter is used
[ 37.918] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.921] (II) Loading sub module "vbe"
[ 37.921] (II) LoadModule: "vbe"
[ 37.921] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.924] (II) Module vbe: vendor="X.Org Foundation"
[ 37.924] compiled for 1.11.4, module version = 1.1.0
[ 37.924] ABI class: X.Org Video Driver, version 11.0
[ 37.925] (II) fglrx(0): VESA BIOS detected
[ 37.925] (II) fglrx(0): VESA VBE Version 3.0
[ 37.925] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.925] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 37.925] (II) fglrx(0): VESA VBE OEM Software Rev: 11.7
[ 37.925] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 37.925] (II) fglrx(0): VESA VBE OEM Product: RV770
[ 37.925] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.964] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 37.964] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
[ 37.964] (II) fglrx(0): PCIE card detected
[ 37.964] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.964] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.965] (II) fglrx(0): Using adapter: 1:0.0.
[ 37.997] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 38.004] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 38.004] (II) fglrx(0): RandR 1.2 support is enabled!
[ 38.004] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 38.004] (==) fglrx(0): Center Mode is disabled
[ 38.004] (II) Loading sub module "fb"
[ 38.004] (II) LoadModule: "fb"
[ 38.004] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38.015] (II) Module fb: vendor="X.Org Foundation"
[ 38.015] compiled for 1.11.4, module version = 1.0.0
[ 38.015] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.015] (II) Loading sub module "ddc"
[ 38.015] (II) LoadModule: "ddc"
[ 38.015] (II) Module "ddc" already built-in
[ 38.859] (II) fglrx(0): Finished Initialize PPLIB!
[ 38.877] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[ 38.877] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[ 38.877] (**) fglrx(0): Option "Position" "0 0"
[ 38.877] (**) fglrx(0): Option "Disable" "false"
[ 38.877] (**) fglrx(0): Option "Rotate" "normal"
[ 38.877] (**) fglrx(0): Option "TargetRefresh" "60"
[ 38.877] (II) fglrx(0): Output DFP2 using monitor section 0-DFP2
[ 38.877] (**) fglrx(0): Option "Position" "331 1080"
[ 38.877] (**) fglrx(0): Option "Disable" "true"
[ 38.877] (**) fglrx(0): Option "Rotate" "normal"
[ 38.877] (**) fglrx(0): Option "TargetRefresh" "60"
[ 38.877] (II) fglrx(0): Output CRT1 has no monitor section
[ 38.877] (II) fglrx(0): Output CRT2 has no monitor section
[ 38.877] (II) fglrx(0): Output TV has no monitor section
[ 38.877] (II) fglrx(0): Output CV has no monitor section
[ 38.877] (II) Loading sub module "ddc"
[ 38.877] (II) LoadModule: "ddc"
[ 38.877] (II) Module "ddc" already built-in
[ 38.877] (II) fglrx(0): Connected Display0: DFP1
[ 38.877] (II) fglrx(0): Display0 EDID data ---------------------------
[ 38.877] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 38.877] (II) fglrx(0): Year: 2009 Week: 13
[ 38.877] (II) fglrx(0): EDID Version: 1.3
[ 38.877] (II) fglrx(0): Digital Display Input
[ 38.877] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 38.877] (II) fglrx(0): Gamma: 2.20
[ 38.877] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 38.877] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.877] (II) fglrx(0): First detailed timing is preferred mode
[ 38.877] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 38.877] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 38.877] (II) fglrx(0): Supported established timings:
[ 38.877] (II) fglrx(0): 720x400@70Hz
[ 38.877] (II) fglrx(0): 640x480@60Hz
[ 38.877] (II) fglrx(0): 640x480@67Hz
[ 38.878] (II) fglrx(0): 640x480@72Hz
[ 38.878] (II) fglrx(0): 640x480@75Hz
[ 38.878] (II) fglrx(0): 800x600@56Hz
[ 38.878] (II) fglrx(0): 800x600@60Hz
[ 38.878] (II) fglrx(0): 800x600@72Hz
[ 38.878] (II) fglrx(0): 800x600@75Hz
[ 38.878] (II) fglrx(0): 832x624@75Hz
[ 38.878] (II) fglrx(0): 1024x768@60Hz
[ 38.878] (II) fglrx(0): 1024x768@70Hz
[ 38.878] (II) fglrx(0): 1024x768@75Hz
[ 38.878] (II) fglrx(0): 1280x1024@75Hz
[ 38.878] (II) fglrx(0): 1152x864@75Hz
[ 38.878] (II) fglrx(0): Manufacturer's mask: 0
[ 38.878] (II) fglrx(0): Supported standard timings:
[ 38.878] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 38.878] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 38.878] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 38.878] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 38.878] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 38.878] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 38.878] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 38.878] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 38.878] (II) fglrx(0): Supported detailed timing:
[ 38.878] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 38.878] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 38.878] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 38.878] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 38.878] (II) fglrx(0): Monitor name: H213H
[ 38.878] (II) fglrx(0): Serial No: LF80D0028500
[ 38.878] (II) fglrx(0): EDID (in hex):
[ 38.878] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 38.878] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 38.878] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 38.878] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 38.878] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 38.878] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 38.878] (II) fglrx(0): 323133480a20202020202020000000ff
[ 38.878] (II) fglrx(0): 004c46383044303032383530300a001a
[ 38.878] (II) fglrx(0): End of Display0 EDID data --------------------
[ 38.878] (II) fglrx(0): Connected Display1: DFP2
[ 38.878] (II) fglrx(0): Display1 EDID data ---------------------------
[ 38.878] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 38.878] (II) fglrx(0): Year: 2008 Week: 5
[ 38.878] (II) fglrx(0): EDID Version: 1.3
[ 38.878] (II) fglrx(0): Digital Display Input
[ 38.878] (II) fglrx(0): DFP 1.x compatible TMDS
[ 38.878] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 38.878] (II) fglrx(0): Gamma: 2.20
[ 38.878] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 38.878] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 38.878] (II) fglrx(0): First detailed timing is preferred mode
[ 38.878] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 38.878] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 38.878] (II) fglrx(0): Supported established timings:
[ 38.878] (II) fglrx(0): 720x400@70Hz
[ 38.878] (II) fglrx(0): 640x480@60Hz
[ 38.878] (II) fglrx(0): 640x480@75Hz
[ 38.878] (II) fglrx(0): 800x600@60Hz
[ 38.878] (II) fglrx(0): 800x600@72Hz
[ 38.878] (II) fglrx(0): 800x600@75Hz
[ 38.878] (II) fglrx(0): 832x624@75Hz
[ 38.878] (II) fglrx(0): 1024x768@60Hz
[ 38.878] (II) fglrx(0): 1024x768@70Hz
[ 38.878] (II) fglrx(0): 1024x768@75Hz
[ 38.878] (II) fglrx(0): Manufacturer's mask: 0
[ 38.878] (II) fglrx(0): Supported standard timings:
[ 38.878] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 38.878] (II) fglrx(0): Supported detailed timing:
[ 38.878] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 38.878] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 38.878] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 38.878] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 38.878] (II) fglrx(0): Serial No: 8AC005284
[ 38.878] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 38.878] (II) fglrx(0): EDID (in hex):
[ 38.878] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 38.878] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 38.878] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 38.878] (II) fglrx(0): 0101010101019420009051201c30c888
[ 38.878] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 38.878] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 38.878] (II) fglrx(0): 414330303532383420202020000000fc
[ 38.878] (II) fglrx(0): 0043696e74697120313257580a200023
[ 38.878] (II) fglrx(0): End of Display1 EDID data --------------------
[ 39.178] (II) fglrx(0): EDID for output DFP1
[ 39.178] (II) fglrx(0): Manufacturer: ACR Model: 87 Serial#: 2435877271
[ 39.178] (II) fglrx(0): Year: 2009 Week: 13
[ 39.178] (II) fglrx(0): EDID Version: 1.3
[ 39.178] (II) fglrx(0): Digital Display Input
[ 39.178] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 39.178] (II) fglrx(0): Gamma: 2.20
[ 39.178] (II) fglrx(0): DPMS capabilities: StandBy Suspend
[ 39.178] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 39.178] (II) fglrx(0): First detailed timing is preferred mode
[ 39.178] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 39.178] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 39.178] (II) fglrx(0): Supported established timings:
[ 39.178] (II) fglrx(0): 720x400@70Hz
[ 39.178] (II) fglrx(0): 640x480@60Hz
[ 39.178] (II) fglrx(0): 640x480@67Hz
[ 39.178] (II) fglrx(0): 640x480@72Hz
[ 39.178] (II) fglrx(0): 640x480@75Hz
[ 39.178] (II) fglrx(0): 800x600@56Hz
[ 39.178] (II) fglrx(0): 800x600@60Hz
[ 39.178] (II) fglrx(0): 800x600@72Hz
[ 39.178] (II) fglrx(0): 800x600@75Hz
[ 39.178] (II) fglrx(0): 832x624@75Hz
[ 39.178] (II) fglrx(0): 1024x768@60Hz
[ 39.178] (II) fglrx(0): 1024x768@70Hz
[ 39.178] (II) fglrx(0): 1024x768@75Hz
[ 39.178] (II) fglrx(0): 1280x1024@75Hz
[ 39.178] (II) fglrx(0): 1152x864@75Hz
[ 39.178] (II) fglrx(0): Manufacturer's mask: 0
[ 39.178] (II) fglrx(0): Supported standard timings:
[ 39.178] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 39.178] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 39.178] (II) fglrx(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 39.178] (II) fglrx(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 39.178] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 39.178] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 39.178] (II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 39.178] (II) fglrx(0): #7: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 39.178] (II) fglrx(0): Supported detailed timing:
[ 39.178] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 39.178] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 39.178] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1110 v_border: 0
[ 39.178] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[ 39.178] (II) fglrx(0): Monitor name: H213H
[ 39.178] (II) fglrx(0): Serial No: LF80D0028500
[ 39.178] (II) fglrx(0): EDID (in hex):
[ 39.178] (II) fglrx(0): 00ffffffffffff000472870097893091
[ 39.178] (II) fglrx(0): 0d13010380301b78caee95a3544c9926
[ 39.178] (II) fglrx(0): 0f5054bfef80714f8180b300d1c09500
[ 39.178] (II) fglrx(0): a940814081c01a3680a070381e403020
[ 39.178] (II) fglrx(0): 3500132b21000018000000fd00384c1f
[ 39.178] (II) fglrx(0): 5311000a202020202020000000fc0048
[ 39.178] (II) fglrx(0): 323133480a20202020202020000000ff
[ 39.178] (II) fglrx(0): 004c46383044303032383530300a001a
[ 39.178] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 39.193] (II) fglrx(0): Using EDID range info for horizontal sync
[ 39.193] (II) fglrx(0): Using EDID range info for vertical refresh
[ 39.193] (II) fglrx(0): Printing DDC gathered Modelines:
[ 39.193] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 39.193] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 39.193] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 39.193] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 39.193] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 39.193] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 39.193] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 39.193] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 39.193] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 39.193] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 39.193] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 39.193] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 39.193] (II) fglrx(0): Printing probed modes for output DFP1
[ 39.193] (II) fglrx(0): Modeline "1920x1080"x60.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 +hsync +vsync (66.6 kHz)
[ 39.193] (II) fglrx(0): Modeline "1776x1000"x60.0 147.05 1776 1880 2072 2368 1000 1001 1004 1035 +hsync -vsync (62.1 kHz)
[ 39.193] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[ 39.193] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 39.193] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 39.193] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 39.194] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 39.194] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 39.194] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 39.194] (II) fglrx(0): EDID for output DFP2
[ 39.194] (II) fglrx(0): Manufacturer: WAC Model: 1019 Serial#: 5284
[ 39.194] (II) fglrx(0): Year: 2008 Week: 5
[ 39.194] (II) fglrx(0): EDID Version: 1.3
[ 39.194] (II) fglrx(0): Digital Display Input
[ 39.194] (II) fglrx(0): DFP 1.x compatible TMDS
[ 39.194] (II) fglrx(0): Max Image Size [cm]: horiz.: 27 vert.: 17
[ 39.194] (II) fglrx(0): Gamma: 2.20
[ 39.194] (II) fglrx(0): DPMS capabilities: StandBy Off
[ 39.194] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 39.194] (II) fglrx(0): First detailed timing is preferred mode
[ 39.194] (II) fglrx(0): redX: 0.589 redY: 0.341 greenX: 0.321 greenY: 0.535
[ 39.194] (II) fglrx(0): blueX: 0.157 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 39.194] (II) fglrx(0): Supported established timings:
[ 39.194] (II) fglrx(0): 720x400@70Hz
[ 39.194] (II) fglrx(0): 640x480@60Hz
[ 39.194] (II) fglrx(0): 640x480@75Hz
[ 39.194] (II) fglrx(0): 800x600@60Hz
[ 39.194] (II) fglrx(0): 800x600@72Hz
[ 39.194] (II) fglrx(0): 800x600@75Hz
[ 39.194] (II) fglrx(0): 832x624@75Hz
[ 39.194] (II) fglrx(0): 1024x768@60Hz
[ 39.194] (II) fglrx(0): 1024x768@70Hz
[ 39.194] (II) fglrx(0): 1024x768@75Hz
[ 39.194] (II) fglrx(0): Manufacturer's mask: 0
[ 39.194] (II) fglrx(0): Supported standard timings:
[ 39.194] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 39.194] (II) fglrx(0): Supported detailed timing:
[ 39.194] (II) fglrx(0): clock: 83.4 MHz Image Size: 261 x 163 mm
[ 39.194] (II) fglrx(0): h_active: 1280 h_sync: 1480 h_sync_end 1616 h_blank_end 1680 h_border: 0
[ 39.194] (II) fglrx(0): v_active: 800 v_sync: 824 v_sync_end 827 v_blanking: 828 v_border: 0
[ 39.194] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 82 kHz, PixClock max 145 MHz
[ 39.194] (II) fglrx(0): Serial No: 8AC005284
[ 39.194] (II) fglrx(0): Monitor name: Cintiq 12WX
[ 39.194] (II) fglrx(0): EDID (in hex):
[ 39.194] (II) fglrx(0): 00ffffffffffff005c231910a4140000
[ 39.194] (II) fglrx(0): 05120103811b1178aad4459657528928
[ 39.194] (II) fglrx(0): 255054a5ee0081000101010101010101
[ 39.194] (II) fglrx(0): 0101010101019420009051201c30c888
[ 39.194] (II) fglrx(0): 830405a31000001e000000fd00384b1f
[ 39.194] (II) fglrx(0): 520e000a202020202020000000ff0038
[ 39.194] (II) fglrx(0): 414330303532383420202020000000fc
[ 39.194] (II) fglrx(0): 0043696e74697120313257580a200023
[ 39.194] (II) fglrx(0): Printing probed modes for output DFP2
[ 39.194] (II) fglrx(0): Modeline "1280x800"x60.0 83.40 1280 1480 1616 1680 800 824 827 828 -hsync -vsync (49.6 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 39.194] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 39.194] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 39.194] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 39.194] (II) fglrx(0): EDID for output CRT1
[ 39.194] (II) fglrx(0): EDID for output CRT2
[ 39.194] (II) fglrx(0): EDID for output TV
[ 39.194] (II) fglrx(0): EDID for output CV
[ 39.194] (II) fglrx(0): Output DFP1 connected
[ 39.194] (II) fglrx(0): Output DFP2 disabled by config file
[ 39.194] (II) fglrx(0): Output CRT1 disconnected
[ 39.194] (II) fglrx(0): Output CRT2 disconnected
[ 39.194] (II) fglrx(0): Output TV disconnected
[ 39.194] (II) fglrx(0): Output CV disconnected
[ 39.194] (II) fglrx(0): Using user preference for initial modes
[ 39.194] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[ 39.194] (II) fglrx(0): Display dimensions: (480, 270) mm
[ 39.194] (II) fglrx(0): DPI set to (101, 101)
[ 39.194] (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 2 displays connected.
[ 39.194] (==) fglrx(0): PseudoColor visuals disabled
[ 39.194] (II) Loading sub module "ramdac"
[ 39.194] (II) LoadModule: "ramdac"
[ 39.194] (II) Module "ramdac" already built-in
[ 39.194] (==) fglrx(0): NoDRI = NO
[ 39.194] (==) fglrx(0): Capabilities: 0x00000000
[ 39.194] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 39.194] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 39.194] (==) fglrx(0): UseFastTLS=0
[ 39.194] (==) fglrx(0): BlockSignalsOnLock=1
[ 39.194] (II) fglrx(0): Desktop Vsync is enabled.
[ 39.194] (--) Depth 24 pixmap format is 32 bpp
[ 39.195] (II) Loading extension ATIFGLRXDRI
[ 39.195] (II) fglrx(0): doing swlDriScreenInit
[ 39.195] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 39.195] ukiDynamicMajor: found major device number 250
[ 39.195] ukiDynamicMajor: found major device number 250
[ 39.195] ukiDynamicMajor: found major device number 250
[ 39.195] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.195] ukiOpenDevice: node name is /dev/ati/card0
[ 39.195] ukiOpenDevice: open result is 16, (OK)
[ 39.195] ukiOpenByBusid: ukiOpenMinor returns 16
[ 39.195] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.195] (II) fglrx(0): [uki] DRM interface version 1.0
[ 39.195] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 39.195] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 39.195] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f0a1c1d9000
[ 39.195] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 39.195] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 39.195] (II) fglrx(0): swlDriScreenInit done
[ 39.195] (II) fglrx(0): Kernel Module Version Information:
[ 39.195] (II) fglrx(0): Name: fglrx
[ 39.195] (II) fglrx(0): Version: 8.97.2
[ 39.195] (II) fglrx(0): Date: Jul 4 2012
[ 39.195] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 39.195] (II) fglrx(0): Kernel Module version matches driver.
[ 39.195] (II) fglrx(0): Kernel Module Build Time Information:
[ 39.195] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.6.4-1-ARCH
[ 39.195] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 39.195] (II) fglrx(0): Build-Kernel __SMP__: no
[ 39.195] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 39.195] (II) fglrx(0): [uki] register handle = 0x00004000
[ 39.218] (II) fglrx(0): DRI initialization successfull
[ 39.219] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 39.220] (==) fglrx(0): Backing store disabled
[ 39.220] (II) Loading extension FGLRXEXTENSION
[ 39.221] (==) fglrx(0): DPMS enabled
[ 39.221] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 39.221] (**) fglrx(0): Textured Video is enabled.
[ 39.221] (II) LoadModule: "glesx"
[ 39.221] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 39.347] (II) Module glesx: vendor="X.Org Foundation"
[ 39.347] compiled for 1.4.99.906, module version = 1.0.0
[ 39.347] (II) Loading extension GLESX
[ 39.347] (II) fglrx(0): GLESX enableFlags = 528
[ 39.358] (II) fglrx(0): GLESX is enabled
[ 39.358] (II) LoadModule: "amdxmm"
[ 39.358] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 39.368] (II) Module amdxmm: vendor="X.Org Foundation"
[ 39.368] compiled for 1.4.99.906, module version = 2.0.0
[ 39.368] (II) Loading extension AMDXVOPL
[ 39.368] (II) Loading extension AMDXVBA
[ 39.384] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 39.393] (II) fglrx(0): Enable composite support successfully
[ 39.393] (II) fglrx(0): X context handle = 0x1
[ 39.393] (II) fglrx(0): [DRI] installation complete
[ 39.393] (==) fglrx(0): Silken mouse enabled
[ 39.394] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 39.394] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 39.394] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 39.394] (II) fglrx(0): Cannot set TV horizontal size.
[ 39.394] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 39.394] (II) fglrx(0): Cannot set TV horizontal position.
[ 39.394] (II) fglrx(0): Cannot set TV vertical position.
[ 39.416] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[ 39.494] (--) RandR disabled
[ 39.494] (II) Initializing built-in extension Generic Event Extension
[ 39.494] (II) Initializing built-in extension SHAPE
[ 39.494] (II) Initializing built-in extension MIT-SHM
[ 39.494] (II) Initializing built-in extension XInputExtension
[ 39.494] (II) Initializing built-in extension XTEST
[ 39.494] (II) Initializing built-in extension BIG-REQUESTS
[ 39.494] (II) Initializing built-in extension SYNC
[ 39.494] (II) Initializing built-in extension XKEYBOARD
[ 39.494] (II) Initializing built-in extension XC-MISC
[ 39.494] (II) Initializing built-in extension SECURITY
[ 39.494] (II) Initializing built-in extension XINERAMA
[ 39.494] (II) Initializing built-in extension XFIXES
[ 39.494] (II) Initializing built-in extension RENDER
[ 39.494] (II) Initializing built-in extension RANDR
[ 39.494] (II) Initializing built-in extension COMPOSITE
[ 39.494] (II) Initializing built-in extension DAMAGE
[ 39.496] ukiDynamicMajor: found major device number 250
[ 39.496] ukiDynamicMajor: found major device number 250
[ 39.496] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.496] ukiOpenDevice: node name is /dev/ati/card0
[ 39.496] ukiOpenDevice: open result is 17, (OK)
[ 39.496] ukiOpenByBusid: ukiOpenMinor returns 17
[ 39.496] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 40.169] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 40.287] (II) fglrx(0): Enable the clock gating!
[ 40.325] (II) fglrx(0): Desktop Vsync is enabled.
[ 40.325] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 40.599] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 40.599] (**) Power Button: Applying InputClass "system-keyboard"
[ 40.599] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.599] (II) LoadModule: "evdev"
[ 40.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.607] (II) Module evdev: vendor="X.Org Foundation"
[ 40.607] compiled for 1.10.99.902, module version = 2.6.0
[ 40.607] Module class: X.Org XInput Driver
[ 40.607] ABI class: X.Org XInput driver, version 13.0
[ 40.607] (II) Using input driver 'evdev' for 'Power Button'
[ 40.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.607] (**) Power Button: always reports core events
[ 40.607] (**) Power Button: Device: "/dev/input/event1"
[ 40.607] (--) Power Button: Found keys
[ 40.607] (II) Power Button: Configuring as keyboard
[ 40.607] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 40.607] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.607] (**) Option "xkb_rules" "evdev"
[ 40.607] (**) Option "xkb_model" "pc105+inet"
[ 40.607] (**) Option "xkb_layout" "us"
[ 40.607] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.644] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 40.644] (**) Power Button: Applying InputClass "system-keyboard"
[ 40.644] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.644] (II) Using input driver 'evdev' for 'Power Button'
[ 40.644] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.644] (**) Power Button: always reports core events
[ 40.644] (**) Power Button: Device: "/dev/input/event0"
[ 40.644] (--) Power Button: Found keys
[ 40.644] (II) Power Button: Configuring as keyboard
[ 40.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 40.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 40.644] (**) Option "xkb_rules" "evdev"
[ 40.645] (**) Option "xkb_model" "pc105+inet"
[ 40.645] (**) Option "xkb_layout" "us"
[ 40.645] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.646] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[ 40.646] (II) No input driver specified, ignoring this device.
[ 40.646] (II) This device may have been added with another device file.
[ 40.646] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/event3)
[ 40.646] (**) Wacom Cintiq 12WX: Applying InputClass "evdev tablet catchall"
[ 40.646] (**) Wacom Cintiq 12WX: Applying InputClass "Wacom class"
[ 40.646] (II) LoadModule: "wacom"
[ 40.646] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 40.651] (II) Module wacom: vendor="X.Org Foundation"
[ 40.651] compiled for 1.11.3, module version = 0.13.0
[ 40.651] Module class: X.Org XInput Driver
[ 40.651] ABI class: X.Org XInput driver, version 13.0
[ 40.651] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX'
[ 40.651] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 40.651] (**) Wacom Cintiq 12WX: always reports core events
[ 40.651] (**) Option "Device" "/dev/input/event3"
[ 40.651] (II) Wacom Cintiq 12WX: type not specified, assuming 'stylus'.
[ 40.651] (II) Wacom Cintiq 12WX: other types will be automatically added.
[ 40.651] (--) Wacom Cintiq 12WX stylus: using pressure threshold of 27 for button 1
[ 40.651] (--) Wacom Cintiq 12WX stylus: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 40.651] (II) Wacom Cintiq 12WX stylus: hotplugging dependent devices.
[ 40.651] (EE) Wacom Cintiq 12WX stylus: Invalid type 'cursor' for this device.
[ 40.651] (EE) Wacom Cintiq 12WX stylus: Invalid type 'touch' for this device.
[ 40.651] (II) Wacom Cintiq 12WX stylus: hotplugging completed.
[ 40.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 40.653] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX stylus" (type: STYLUS, id 8)
[ 40.653] (**) Wacom Cintiq 12WX stylus: (accel) keeping acceleration scheme 1
[ 40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration profile 0
[ 40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration factor: 2.000
[ 40.653] (**) Wacom Cintiq 12WX stylus: (accel) acceleration threshold: 4
[ 40.654] (II) config/udev: Adding input device Wacom Cintiq 12WX (/dev/input/mouse0)
[ 40.654] (II) No input driver specified, ignoring this device.
[ 40.654] (II) This device may have been added with another device file.
[ 40.654] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event5)
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[ 40.654] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[ 40.654] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event5"
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[ 40.654] (--) Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[ 40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[ 40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[ 40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 40.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input5/event5"
[ 40.654] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[ 40.654] (**) Option "xkb_rules" "evdev"
[ 40.654] (**) Option "xkb_model" "pc105+inet"
[ 40.654] (**) Option "xkb_layout" "us"
[ 40.654] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.654] (II) Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[ 40.654] (WW) Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[ 40.654] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[ 40.655] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[ 40.655] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 40.655] (II) No input driver specified, ignoring this device.
[ 40.655] (II) This device may have been added with another device file.
[ 40.655] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse1)
[ 40.655] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "system-keyboard"
[ 40.655] (II) No input driver specified, ignoring this device.
[ 40.655] (II) This device may have been added with another device file.
[ 40.655] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event6)
[ 40.655] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 40.655] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 40.655] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 40.655] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.655] (**) Logitech USB Keyboard: always reports core events
[ 40.655] (**) Logitech USB Keyboard: Device: "/dev/input/event6"
[ 40.655] (--) Logitech USB Keyboard: Found keys
[ 40.655] (II) Logitech USB Keyboard: Configuring as keyboard
[ 40.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input6/event6"
[ 40.655] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 40.655] (**) Option "xkb_rules" "evdev"
[ 40.655] (**) Option "xkb_model" "pc105+inet"
[ 40.655] (**) Option "xkb_layout" "us"
[ 40.655] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.655] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[ 40.655] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 40.655] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 40.655] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 40.655] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.655] (**) Logitech USB Keyboard: always reports core events
[ 40.655] (**) Logitech USB Keyboard: Device: "/dev/input/event7"
[ 40.655] (--) Logitech USB Keyboard: Found absolute axes
[ 40.655] (--) Logitech USB Keyboard: Found keys
[ 40.655] (II) Logitech USB Keyboard: Configuring as mouse
[ 40.655] (II) Logitech USB Keyboard: Configuring as keyboard
[ 40.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input7/event7"
[ 40.656] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 40.656] (**) Option "xkb_rules" "evdev"
[ 40.656] (**) Option "xkb_model" "pc105+inet"
[ 40.656] (**) Option "xkb_layout" "us"
[ 40.656] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.656] (II) Logitech USB Keyboard: initialized for absolute axes.
[ 40.656] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 40.656] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 40.656] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 40.656] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 40.656] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event4)
[ 40.656] (**) USB 2.0 Camera: Applying InputClass "system-keyboard"
[ 40.656] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 40.656] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 40.656] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.656] (**) USB 2.0 Camera: always reports core events
[ 40.656] (**) USB 2.0 Camera: Device: "/dev/input/event4"
[ 40.656] (--) USB 2.0 Camera: Found keys
[ 40.656] (II) USB 2.0 Camera: Configuring as keyboard
[ 40.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input4/event4"
[ 40.656] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 12)
[ 40.656] (**) Option "xkb_rules" "evdev"
[ 40.656] (**) Option "xkb_model" "pc105+inet"
[ 40.656] (**) Option "xkb_layout" "us"
[ 40.656] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.657] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
[ 40.657] (II) No input driver specified, ignoring this device.
[ 40.657] (II) This device may have been added with another device file.
[ 40.657] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event11)
[ 40.657] (II) No input driver specified, ignoring this device.
[ 40.657] (II) This device may have been added with another device file.
[ 40.657] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[ 40.657] (II) No input driver specified, ignoring this device.
[ 40.657] (II) This device may have been added with another device file.
[ 40.657] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event13)
[ 40.657] (II) No input driver specified, ignoring this device.
[ 40.657] (II) This device may have been added with another device file.
[ 40.658] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event14)
[ 40.658] (II) No input driver specified, ignoring this device.
[ 40.658] (II) This device may have been added with another device file.
[ 40.658] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event15)
[ 40.658] (II) No input driver specified, ignoring this device.
[ 40.658] (II) This device may have been added with another device file.
[ 40.658] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[ 40.658] (II) No input driver specified, ignoring this device.
[ 40.658] (II) This device may have been added with another device file.
[ 40.659] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event9)
[ 40.659] (II) No input driver specified, ignoring this device.
[ 40.659] (II) This device may have been added with another device file.
[ 40.659] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 40.659] (II) No input driver specified, ignoring this device.
[ 40.659] (II) This device may have been added with another device file.
[ 40.675] (**) Wacom Cintiq 12WX eraser: Applying InputClass "evdev tablet catchall"
[ 40.675] (**) Wacom Cintiq 12WX eraser: Applying InputClass "Wacom class"
[ 40.675] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX eraser'
[ 40.675] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 40.675] (**) Wacom Cintiq 12WX eraser: always reports core events
[ 40.675] (**) Option "Device" "/dev/input/event3"
[ 40.675] (**) Option "Type" "eraser"
[ 40.675] (--) Wacom Cintiq 12WX eraser: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 40.693] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 40.693] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX eraser" (type: ERASER, id 13)
[ 40.693] (**) Wacom Cintiq 12WX eraser: (accel) keeping acceleration scheme 1
[ 40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration profile 0
[ 40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration factor: 2.000
[ 40.693] (**) Wacom Cintiq 12WX eraser: (accel) acceleration threshold: 4
[ 40.693] (**) Wacom Cintiq 12WX pad: Applying InputClass "evdev tablet catchall"
[ 40.693] (**) Wacom Cintiq 12WX pad: Applying InputClass "Wacom class"
[ 40.693] (II) Using input driver 'wacom' for 'Wacom Cintiq 12WX pad'
[ 40.693] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 40.693] (**) Wacom Cintiq 12WX pad: always reports core events
[ 40.693] (**) Option "Device" "/dev/input/event3"
[ 40.693] (**) Option "Type" "pad"
[ 40.693] (--) Wacom Cintiq 12WX pad: Wacom USB CintiqV5 tablet maxX=53020 maxY=33440 maxZ=1023 resX=200000 resY=200000 tilt=enabled
[ 40.693] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3/event3"
[ 40.693] (II) XINPUT: Adding extended input device "Wacom Cintiq 12WX pad" (type: PAD, id 14)
[ 40.694] (**) Wacom Cintiq 12WX pad: (accel) keeping acceleration scheme 1
[ 40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration profile 0
[ 40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration factor: 2.000
[ 40.694] (**) Wacom Cintiq 12WX pad: (accel) acceleration threshold: 4
[ 40.694] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 44.944] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 44.944] (II) fglrx(0): Using hsync ranges from config file
[ 44.944] (II) fglrx(0): Using vrefresh ranges from config file
[ 44.944] (II) fglrx(0): Printing DDC gathered Modelines:
[ 44.944] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 44.944] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 44.944] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 44.944] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 44.944] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 44.944] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 44.944] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 44.944] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 44.944] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 44.944] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 44.944] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 44.944] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 44.944] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 45.477] (WW) fglrx(0): Cannot get updated TV attributes.
[ 49.557] (II) fglrx(0): EDID vendor "ACR", prod id 135
[ 49.557] (II) fglrx(0): Using hsync ranges from config file
[ 49.557] (II) fglrx(0): Using vrefresh ranges from config file
[ 49.557] (II) fglrx(0): Printing DDC gathered Modelines:
[ 49.557] (II) fglrx(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1110 -hsync -vsync (66.6 kHz)
[ 49.557] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 49.557] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 49.557] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 49.557] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 49.557] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 49.557] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 49.557] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 49.557] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 49.557] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 49.557] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 49.557] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 49.557] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
[ 50.548] (WW) fglrx(0): Cannot get updated TV attributes.
If you notice, the meaningful X errors in the first one are:
[ 2789.156] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 2789.156] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 2789.156]
Fatal server error:
[ 2789.156] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 2789.156]
[ 2789.156]
But I'm just coming up short as to how to fix them. Any help would be greatly appreciated.
ps. Right before I wiped my system and reinstalled Win8/ArchLinux, I was running a Arch Linux with Gnome Shell 3.4.2 successfully, and, when 3.6.1 was released, I upgraded to that. One of the reasons I wiped my system was because I could login to GDM after the upgrade. However the problem was different, GDM started just fine (I was using Grub Legacy and Initscript) and it would start to render the background, but then it would say "Something went wrong" and retry (forever). I was running the same Xorg and Catalyst version as well, so I'm thinking it's something to do with systemd and/or grub2 (I did have a Swap partition, but that's the only other variable I can think of)
Offline
Hello: My english is very bad.
But, look for is:
systemctl enable gdm.service.
system enable NetworkManager.service
Offline
Hello: My english is very bad.
But, look for is:
systemctl enable gdm.service.
system enable NetworkManager.service
Both GDM an NetworkManager daemons have been started, that's not the problem. GDM fails to start due to Xorg errors.
I was going to post the results of "# journalctl", but Chromium constantly fails when I try to post it.
Offline
The latest entry in the readout from "$ journalctl":
Nov 02 10:39:12 philip-linux pulseaudio[500]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.system
Nov 02 10:39:15 philip-linux pulseaudio[544]: [pulseaudio] pid.c: Daemon already running.
Nov 02 10:39:18 philip-linux goa[569]: goa-daemon version 3.6.0 starting [main.c:112, main()]
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
and from "$ sudo journalctl":
...skipping...
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
...skipping...
Nov 02 10:39:18 philip-linux systemd[1]: Starting Disk Manager...
Nov 02 10:39:18 philip-linux udisksd[577]: udisks daemon version 2.0.0 starting
Nov 02 10:39:18 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 02 10:39:18 philip-linux udisksd[577]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 02 10:39:18 philip-linux systemd[1]: Started Disk Manager.
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='acc
Nov 02 10:39:20 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.servi
Nov 02 10:39:20 philip-linux systemd[1]: Starting Accounts Service...
Nov 02 10:39:20 philip-linux accounts-daemon[598]: started daemon version 0.6.25
Nov 02 10:39:20 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 02 10:39:20 philip-linux systemd[1]: Started Accounts Service.
Nov 02 10:39:20 philip-linux gnome-keyring-daemon[420]: keyring alias directory: /home/philip/.local/share/keyrings
Nov 02 10:39:20 philip-linux polkitd[268]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell],
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:39:23 philip-linux gnome-keyring-daemon[420]: Gkm: unsupported key algorithm in certificate: 1.2.840.10045.2.1
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 10:41:27 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 10:41:27 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 10:41:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 10:41:27 philip-linux systemd[1]: Started Hostname Service.
Nov 02 10:42:30 philip-linux sudo[876]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 10:42:30 philip-linux sudo[876]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 10:42:35 philip-linux sudo[876]: pam_unix(sudo:session): session closed for user root
Nov 02 10:53:18 philip-linux systemd[1]: Starting Cleanup of Temporary Directories...
Nov 02 10:53:18 philip-linux systemd-tmpfiles[958]: stat(/run/user/1000/gvfs) failed: Permission denied
Nov 02 10:53:18 philip-linux systemd[1]: Started Cleanup of Temporary Directories.
Nov 02 11:01:01 philip-linux /usr/sbin/crond[966]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[967]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 11:01:01 philip-linux /USR/SBIN/CROND[966]: pam_unix(crond:session): session closed for user root
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='db
Nov 02 11:23:13 philip-linux dbus[251]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop
Nov 02 11:23:13 philip-linux systemd[1]: Starting Hostname Service...
Nov 02 11:23:13 philip-linux dbus-daemon[251]: dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux dbus[251]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 02 11:23:13 philip-linux systemd[1]: Started Hostname Service.
Nov 02 11:33:58 philip-linux sudo[1163]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status smbd
Nov 02 11:33:58 philip-linux sudo[1163]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:33:59 philip-linux sudo[1163]: pam_unix(sudo:session): session closed for user root
Nov 02 11:34:23 philip-linux sudo[1165]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/systemctl status nmbd
Nov 02 11:34:23 philip-linux sudo[1165]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Nov 02 11:34:24 philip-linux sudo[1165]: pam_unix(sudo:session): session closed for user root
Nov 02 11:45:38 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:45:38 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 11:53:27 philip-linux dbus-daemon[251]: dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.
Nov 02 11:53:27 philip-linux dbus[251]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=249
Nov 02 12:01:01 philip-linux /usr/sbin/crond[1356]: pam_unix(crond:session): session opened for user root by (uid=0)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1357]: (root) CMD (run-parts /etc/cron.hourly)
Nov 02 12:01:01 philip-linux /USR/SBIN/CROND[1356]: pam_unix(crond:session): session closed for user root
Nov 02 12:13:25 philip-linux sudo[1475]: philip : TTY=pts/0 ; PWD=/home/philip ; USER=root ; COMMAND=/usr/bin/journalctl
Nov 02 12:13:25 philip-linux sudo[1475]: pam_unix(sudo:session): session opened for user root by philip(uid=0)
Offline
and the result of "$ sudo systemctl --all"
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount
dev-cdrom.device loaded active plugged ASUS_DRW-2014S1T
dev-disk-by\x2did-ata\x2dASUS_DRW\x2d2014S1T.device loaded active plugged ASUS_DRW-2014S1T
dev-disk-by\x2did-ata\x2dST3640323AS_5VK08QX9.device loaded active plugged ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart1.device loaded active plugged ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart2.device loaded active plugged ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart3.device loaded active plugged ST3640323AS
dev-disk-by\x2did...3640323AS_5VK08QX9\x2dpart4.device loaded active plugged ST3640323AS
dev-disk-by\x2did..._2.0_FD_6E820B0B2944\x2d0:0.device loaded active plugged USB_2.0_FD
dev-disk-by\x2did-wwn\x2d0x5000c500141563f8.device loaded active plugged ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart1.device loaded active plugged ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart2.device loaded active plugged ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart3.device loaded active plugged ST3640323AS
dev-disk-by\x2did...0x5000c500141563f8\x2dpart4.device loaded active plugged ST3640323AS
dev-disk-by\x2dlabel-System\x5cx20Reserved.device loaded active plugged ST3640323AS
dev-disk-by\x2dpa...d0:6:1.0\x2dscsi\x2d0:0:0:0.device loaded active plugged USB_2.0_FD
dev-disk-by\x2duu...2a4\x2da6f5\x2d484c32e4641f.device loaded active plugged ST3640323AS
dev-disk-by\x2duuid-82BED47FBED46D63.device loaded active plugged ST3640323AS
dev-disk-by\x2duuid-9076D1D376D1BA64.device loaded active plugged ST3640323AS
dev-disk-by\x2duu...3c0\x2d9d61\x2d4770c2e40d0c.device loaded active plugged ST3640323AS
dev-sda.device loaded active plugged ST3640323AS
dev-sda1.device loaded active plugged ST3640323AS
dev-sda2.device loaded active plugged ST3640323AS
dev-sda3.device loaded active plugged ST3640323AS
dev-sda4.device loaded active plugged ST3640323AS
dev-sdb.device loaded active plugged USB_2.0_FD
dev-sr0.device loaded active plugged ASUS_DRW-2014S1T
dev-ttyS0.device loaded active plugged /dev/ttyS0
dev-ttyS1.device loaded active plugged /dev/ttyS1
dev-ttyS2.device loaded active plugged /dev/ttyS2
dev-ttyS3.device loaded active plugged /dev/ttyS3
sys-devices-pci00....0-0000:01:00.1-sound-card2.device loaded active plugged RV770 HDMI Audio [Radeon HD 4850/4870]
sys-devices-pci00...:06.0-0000:02:00.0-net-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged ST3640323AS
sys-devices-pci00...:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged ST3640323AS
sys-devices-pci00...rget0:0:0-0:0:0:0-block-sda.device loaded active plugged ST3640323AS
sys-devices-pci00...rget2:0:0-2:0:0:0-block-sr0.device loaded active plugged ASUS_DRW-2014S1T
sys-devices-pci00...x2d1-1\x2d1:1.2-sound-card0.device loaded active plugged MSI Starcam Racer
sys-devices-pci00...rget6:0:0-6:0:0:0-block-sdb.device loaded active plugged USB_2.0_FD
sys-devices-pci0000:00-0000:00:14.2-sound-card1.device loaded active plugged SBx00 Azalia (Intel HDA)
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:09-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:09/tty/ttyS0
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
...skipping...
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp-runlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-update-utmp-shutdown.service loaded inactive dead Update UTMP about System Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
winbindd.service loaded failed failed Samba Winbind daemon
dbus.socket loaded active running D-Bus System Message Bus Socket
syslog.socket loaded inactive dead Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs.target loaded active active Remote File Systems
rescue.target loaded inactive dead Rescue Mode
shutdown.target loaded inactive dead Shutdown
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded inactive dead Syslog
umount.target loaded inactive dead Unmount All Filesystems
systemd-readahead-done.timer loaded inactive dead Stop Read-Ahead Data Collection 10s After Completed Sta
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
138 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.
Offline
Post in association of this problem on AMD Bar 'n Grill:
https://bbs.archlinux.org/viewtopic.php … 7#p1187257
Looks like this is a special problem with Xorg 1.11, systemd, and GDM 3.6.x
Offline
Pages: 1