You are not logged in.

#1 2012-12-07 15:56:45

ould
Member
Registered: 2007-05-22
Posts: 122

Kernel Stack Trace upon boot, SCSI/ATA errors

Hello all,

The last 2 times I have tried upgrading my file/media server I am running into some kernel issues which seem related to SCSI/ATA. I have never had this issue before but downgraded to my last working kernel solves the issue. I took a picture of the stack trace as I am not sure how to get this info otherwise. Obviously I can only see what is on the screen at the time of the lockup, I can't see what came before. If someone can point me to where I can find a log of this then I can post it. In the meantime here is a screenshot.

https://www.dropbox.com/s/3be7coziogu3m … -00015.jpg

I hope someone can help as I am afraid to update my system now. I guess I will just put the kernel stuff into ignore for the time being. :-(

Last working kernel version was linux-3.5.4-1

I am not sure what other info might be needed, let me know and I can post up whatever logs/info is requested.

Thanks,

Kevin

Offline

#2 2012-12-07 16:20:40

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: Kernel Stack Trace upon boot, SCSI/ATA errors

I think you need to provide more information.  Like what is the actual hardware you are running on, maybe post the output of lspci -v?  Also, a detailed description of what happens when you boot.  Does the kernel seem to load, the initramfs, does it start to boot, are there messages during the boot process, where are my pants?  If it is loading the initramfs, what is in your mkinitcpio.conf?

If you continue on a path of ignoring the kernel updates, keep in mind that there are packages of modules that are built against the current kernel. So for instance, my ethernet needs the r8168 module which is available in community.  So I would need to ignore that as well.

Offline

#3 2012-12-07 16:39:04

ould
Member
Registered: 2007-05-22
Posts: 122

Re: Kernel Stack Trace upon boot, SCSI/ATA errors

Just to update, I fixed the issue by removing pata_acpi and pata_amd from mkinitcpio.conf. I don't use any pata devices on that machine so this is a good fix for now.

The problem would occur almost instantly upon boot up, basically I couldn't see anything before the stack trace popped, so to be honest not sure how far along it got.

lspci:

00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a1)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: <access denied>

00:01.0 ISA bridge: NVIDIA Corporation MCP55 LPC Bridge (rev a2)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: NVIDIA Corporation MCP55 SMBus (rev a2)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at fc00 [size=64]
        I/O ports at 1c00 [size=64]
        I/O ports at 1c40 [size=64]
        Capabilities: <access denied>
        Kernel driver in use: nForce2_smbus

00:02.0 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a1) (prog-if 10 [OHCI])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci_hcd

00:02.1 USB controller: NVIDIA Corporation MCP55 USB Controller (rev a2) (prog-if 20 [EHCI])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:04.0 IDE interface: NVIDIA Corporation MCP55 IDE (rev a1) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable)
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable)
        I/O ports at f000 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_amd

00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at dc00 [size=16]
        Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: sata_nv

00:05.1 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        I/O ports at 09e0 [size=8]
        I/O ports at 0be0 [size=4]
        I/O ports at 0960 [size=8]
        I/O ports at 0b60 [size=4]
        I/O ports at c800 [size=16]
        Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: sata_nv

00:05.2 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        I/O ports at c400 [size=8]
        I/O ports at c000 [size=4]
        I/O ports at bc00 [size=8]
        I/O ports at b800 [size=4]
        I/O ports at b400 [size=16]
        Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: sata_nv

00:06.0 PCI bridge: NVIDIA Corporation MCP55 PCI bridge (rev a2) (prog-if 01 [Subtractive decode])
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fdd00000-fddfffff
        Prefetchable memory behind bridge: fde00000-fdefffff
        Capabilities: <access denied>

00:06.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:08.0 Bridge: NVIDIA Corporation MCP55 Ethernet (rev a2)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 45
        Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at b000 [size=8]
        Memory at fe029000 (32-bit, non-prefetchable) [size=256]
        Memory at fe028000 (32-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: forcedeth

00:09.0 Bridge: NVIDIA Corporation MCP55 Ethernet (rev a2)
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at ac00 [size=8]
        Memory at fe026000 (32-bit, non-prefetchable) [size=256]
        Memory at fe025000 (32-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: forcedeth

00:0a.0 PCI bridge: NVIDIA Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00008000-00008fff
        Memory behind bridge: fdc00000-fdcfffff
        Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0c.0 PCI bridge: NVIDIA Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00007000-00007fff
        Memory behind bridge: fda00000-fdafffff
        Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0d.0 PCI bridge: NVIDIA Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: fd800000-fd8fffff
        Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0e.0 PCI bridge: NVIDIA Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: fd600000-fd6fffff
        Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0f.0 PCI bridge: NVIDIA Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: fb000000-fcffffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
        Flags: fast devsel
        Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
        Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
        Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Flags: fast devsel
        Capabilities: <access denied>
        Kernel driver in use: k8temp

01:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] (prog-if 10 [OHCI])
        Subsystem: ABIT Computer Corp. Device 1c20
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
        Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

06:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device 8307
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at ee000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 4c00 [size=128]
        [virtual] Expansion ROM at e0000000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia

06:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
        Subsystem: ASUSTeK Computer Inc. Device 8307
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

mkinitcpio.conf

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES="pata_acpi pata_amd ata_generic scsi_mod sata_nv"

# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish.  This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway.  This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
#    FILES="/etc/modprobe.conf"
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
#    This setup specifies all modules in the MODULES setting above.
#    No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
#    This setup will autodetect all modules for your system and should
#    work as a sane default
#    HOOKS="base udev autodetect pata scsi sata filesystems"
#
#    This is identical to the above, except the old ide subsystem is
#    used for IDE devices instead of the new pata subsystem.
#    HOOKS="base udev autodetect ide scsi sata filesystems"
#
#    This setup will generate a 'full' image which supports most systems.
#    No autodetection is done.
#    HOOKS="base udev pata scsi sata usb filesystems"
#
#    This setup assembles an pata raid array with an encrypted root FS.
#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
#    HOOKS="base udev pata raid encrypt filesystems"
#
#    This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata usbinput keymap filesystems"

Offline

Board footer

Powered by FluxBB