You are not logged in.

#1 2013-02-20 21:57:03

arghhlinux
Member
Registered: 2013-02-20
Posts: 7

[SOLVED] Suspend, temp3 goes from 20C to 100C

EDIT No problems using linux-lts kernel. Maybe 3.8 kernel works too. Thanks!

----
Then fan is running 100%, noise is terrible and nothing that I know of but reboot helps. Sometimes I had this same problem on Ubuntu and all went normal if suspended again, so this should be solvable.

$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +52.0°C  (crit = +105.0°C)
temp2:        +29.7°C  (crit = +108.0°C)
temp3:        +20.0°C  (crit = +110.0°C)
temp4:        +49.0°C  (crit = +256.0°C)
temp5:        +55.0°C  (crit = +108.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +56.0°C  (high = +100.0°C, crit = +100.0°C)

after suspend

$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +53.0°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +108.0°C)
temp3:       +100.0°C  (crit = +110.0°C)
temp4:        +57.0°C  (crit = +256.0°C)
temp5:        +54.0°C  (crit = +108.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +55.0°C  (high = +100.0°C, crit = +100.0°C)

Almost same problem here but not solved. https://bbs.archlinux.org/viewtopic.php?id=156681

Last edited by arghhlinux (2013-02-21 13:25:40)

Offline

#2 2013-02-20 22:55:33

frank604
Member
From: BC, Canada
Registered: 2011-04-20
Posts: 1,065
Website

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

What kernel are you on?  Have you tried older/newer kernels? Does this issue exist across all kernels tested?


github       bible       blog       screenshot

Offline

#3 2013-02-21 00:32:08

arghhlinux
Member
Registered: 2013-02-20
Posts: 7

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

Well 'uname -a' tells 3.7.9-1-ARCH. Haven't tried anything because no idea where to start looking. :-) I guess it's same with every kernel, because Ubuntu 10.04-12.04 had this same problem but occurred randomly, like once a month. Now that happens every time and won't stop until reboot (sure there are better ways but I am very noob).

Last edited by arghhlinux (2013-02-21 00:33:33)

Offline

#4 2013-02-21 01:31:15

the sad clown
Member
From: 192.168.0.X
Registered: 2011-03-20
Posts: 833

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

You should try to offer more information:  What is your computer model and processor, journalctl log from the wakeup period.  Also, make sure all your vents are clean and clear of dust.

Last edited by the sad clown (2013-02-21 01:32:35)


I laugh, yet the joke is on me

Offline

#5 2013-02-21 01:38:31

frank604
Member
From: BC, Canada
Registered: 2011-04-20
Posts: 1,065
Website

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

https://bugs.archlinux.org/task/32025

Use LTS kernel to see if this fixes your issue. Or wait for 3.8 kernel.


github       bible       blog       screenshot

Offline

#6 2013-02-21 01:43:25

Hspasta
Member
Registered: 2011-12-24
Posts: 187
Website

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

Offline

#7 2013-02-21 09:39:21

arghhlinux
Member
Registered: 2013-02-20
Posts: 7

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

the sad clown wrote:

You should try to offer more information:  What is your computer model and processor, journalctl log from the wakeup period.  Also, make sure all your vents are clean and clear of dust.

Well of course I forgot all important information. I opened and cleaned everything half-year ago. Model is HP 550: celeron M 550 and intel X3100 gpu. .

$ cat /proc/cpuinfo

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 22
model name	: Intel(R) Celeron(R) CPU          550  @ 2.00GHz
stepping	: 1
microcode	: 0x33
cpu MHz		: 1995.181
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm
bogomips	: 3991.62
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

$ systemctl

pulseaudio[534]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.L
goa[608]: goa-daemon version 3.6.2 starting [main.c:112, main()]

$ dmesg

[[  255.556929] ACPI: Preparing to enter system sleep state S3
[  255.557031] PM: Saving platform NVS memory
[  255.557188] Disabling non-boot CPUs ...
[  255.557232] Extended CMOS year: 2000
[  255.557232] ACPI: Low-level resume complete
[  255.557232] PM: Restoring platform NVS memory
[  255.557232] Extended CMOS year: 2000
[  255.557232] CPU0: Thermal monitoring handled by SMI
[  255.557232] ACPI: Waking up from system sleep state S3
[  255.706778] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[  255.720043] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[  255.736674] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[  255.750190] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[  255.750255] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[  255.750319] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[  255.763376] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[  255.776853] PM: noirq resume of devices complete after 96.749 msecs
[  255.777029] PM: early resume of devices complete after 0.104 msecs
[  255.777056] i915 0000:00:02.0: setting latency timer to 64
[  255.780005] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[  255.780096] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[  255.782025] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[  255.782055] usb usb3: root hub lost power or was reset
[  255.782079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[  255.782146] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  255.782201] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  255.782231] usb usb4: root hub lost power or was reset
[  255.782251] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  255.782280] usb usb5: root hub lost power or was reset
[  255.782300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  255.782329] usb usb6: root hub lost power or was reset
[  255.782351] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  255.782369] pci 0000:00:1e.0: setting latency timer to 64
[  255.782386] ata_piix 0000:00:1f.1: setting latency timer to 64
[  255.782404] ahci 0000:00:1f.2: setting latency timer to 64
[  255.802391] ata2: port disabled--ignoring
[  256.126694] ata5: SATA link down (SStatus 0 SControl 300)
[  256.126721] ata4: SATA link down (SStatus 0 SControl 300)
[  256.266684] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
[  256.547061] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered ou
t
[  256.547063] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered ou
t
[  256.593604] ata1.00: configured for MWDMA2
[  257.380800] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: R
x/Tx
[  257.380803] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  258.153366] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  258.657742] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) fil
tered out
[  258.657744] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVER
LAY) filtered out
[  258.657791] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succee
ded
[  258.657847] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) rejected by
 device (Stat=0x51 Err=0x04)
[  258.659608] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) fil
tered out
[  258.659611] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVER
LAY) filtered out
[  258.659650] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succee
ded
[  258.659702] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) rejected by
 device (Stat=0x51 Err=0x04)
[  258.659938] ata3.00: configured for UDMA/100
[  258.683389] sd 2:0:0:0: [sda] Starting disk
[  258.697514] PM: resume of devices complete after 2920.480 msecs
[  258.697811] PM: Finishing wakeup.
[  258.697813] Restarting tasks ... done.
[  258.730008] video LNXVIDEO:00: Restoring backlight state

Last edited by arghhlinux (2013-02-21 09:48:03)

Offline

#8 2013-02-21 12:37:02

frank604
Member
From: BC, Canada
Registered: 2011-04-20
Posts: 1,065
Website

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

did you try the suggestions?


github       bible       blog       screenshot

Offline

#9 2013-02-21 13:18:39

arghhlinux
Member
Registered: 2013-02-20
Posts: 7

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

Yeah thanks fellas, lts-kernel works well. I'll try 3.8 when it comes.

Last edited by arghhlinux (2013-02-21 13:24:02)

Offline

#10 2013-02-21 18:15:13

frank604
Member
From: BC, Canada
Registered: 2011-04-20
Posts: 1,065
Website

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

Nice name by the way lol.


github       bible       blog       screenshot

Offline

#11 2013-02-22 01:35:16

the sad clown
Member
From: 192.168.0.X
Registered: 2011-03-20
Posts: 833

Re: [SOLVED] Suspend, temp3 goes from 20C to 100C

You can look into this bug report as well:

https://bugzilla.redhat.com/show_bug.cgi?id=895276#c6


I laugh, yet the joke is on me

Offline

Board footer

Powered by FluxBB