You are not logged in.

#1 2013-03-21 16:15:14

wudu
Member
Registered: 2010-03-08
Posts: 78

[solved] Graphic output freezes every ~12 seconds

Hi,
I have got an old Laptop, HP compaq nx6110. I installed arch linux and LXDE. Tested the following with Openbox only as well.

The whole screen freezes every ~12 seconds for ~1 second (mouse, terminal, youtube vid). It seems to only affect graphics output because audio works uninterrupted. Tried with a youtube video, audio plays uninterrupted and video freezes.
First I thought it could be something hardware related so I made a HDD image and installed LUbuntu. LUbuntu doesn't have that problem.
So it has to do something with Arch but I have no idea what it could be.

Graphics card is an Inel Mobile 915GM. The i915 is loaded.

Hope someone can help me because it is anoying to work with these interrupts and I don't want to use LUbuntu...

Last edited by wudu (2013-03-26 19:49:36)

Offline

#2 2013-03-21 16:52:16

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

Can you attach your /var/log/Xorg.0.log ?

dmesg > ~/dmesg.log and attach dmesg.log from your home directory too...

Offline

#3 2013-03-21 17:14:57

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

Sure

[wudu@Laptop ~]$ cat /var/log/Xorg.0.log
[    13.917] 
X.Org X Server 1.14.0
Release Date: 2013-03-05
[    13.920] X Protocol Version 11, Revision 0
[    13.920] Build Operating System: Linux 3.8.2-1-ARCH i686 
[    13.920] Current Operating System: Linux Laptop 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[    13.920] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f7e272ab-1abd-46a4-bc88-b4e7e34ff26a ro reboot=pci
[    13.920] Build Date: 09 March 2013  11:46:22AM
[    13.920]  
[    13.920] Current version of pixman: 0.28.2
[    13.920] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.920] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.920] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 22:59:23 2013
[    14.021] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.023] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.150] (==) No Layout section.  Using the first Screen section.
[    14.150] (==) No screen section available. Using defaults.
[    14.150] (**) |-->Screen "Default Screen Section" (0)
[    14.150] (**) |   |-->Monitor "<default monitor>"
[    14.164] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.164] (==) Automatically adding devices
[    14.164] (==) Automatically enabling devices
[    14.164] (==) Automatically adding GPU devices
[    14.215] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.215] 	Entry deleted from font path.
[    14.215] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    14.215] 	Entry deleted from font path.
[    14.215] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.215] 	Entry deleted from font path.
[    14.215] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.215] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.215] 	Entry deleted from font path.
[    14.215] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.215] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    14.215] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.215] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.230] (II) Loader magic: 0x825b620
[    14.230] (II) Module ABI versions:
[    14.230] 	X.Org ANSI C Emulation: 0.4
[    14.230] 	X.Org Video Driver: 14.1
[    14.230] 	X.Org XInput driver : 19.1
[    14.230] 	X.Org Server Extension : 7.0
[    14.230] (II) config/udev: Adding drm device (/dev/dri/card0)
[    14.232] (--) PCI:*(0:0:2:0) 8086:2592:103c:099c rev 3, Mem @ 0xd0100000/524288, 0xc0000000/268435456, 0xd0180000/262144, I/O @ 0x00002000/8
[    14.232] (--) PCI: (0:0:2:1) 8086:2792:103c:099c rev 3, Mem @ 0xd0200000/524288
[    14.234] Initializing built-in extension Generic Event Extension
[    14.234] Initializing built-in extension SHAPE
[    14.234] Initializing built-in extension MIT-SHM
[    14.234] Initializing built-in extension XInputExtension
[    14.234] Initializing built-in extension XTEST
[    14.234] Initializing built-in extension BIG-REQUESTS
[    14.234] Initializing built-in extension SYNC
[    14.234] Initializing built-in extension XKEYBOARD
[    14.234] Initializing built-in extension XC-MISC
[    14.234] Initializing built-in extension SECURITY
[    14.234] Initializing built-in extension XINERAMA
[    14.234] Initializing built-in extension XFIXES
[    14.234] Initializing built-in extension RENDER
[    14.234] Initializing built-in extension RANDR
[    14.234] Initializing built-in extension COMPOSITE
[    14.234] Initializing built-in extension DAMAGE
[    14.234] Initializing built-in extension MIT-SCREEN-SAVER
[    14.234] Initializing built-in extension DOUBLE-BUFFER
[    14.234] Initializing built-in extension RECORD
[    14.234] Initializing built-in extension DPMS
[    14.234] Initializing built-in extension X-Resource
[    14.234] Initializing built-in extension XVideo
[    14.234] Initializing built-in extension XVideo-MotionCompensation
[    14.234] Initializing built-in extension XFree86-VidModeExtension
[    14.234] Initializing built-in extension XFree86-DGA
[    14.234] Initializing built-in extension XFree86-DRI
[    14.234] Initializing built-in extension DRI2
[    14.234] (II) "glx" will be loaded by default.
[    14.234] (II) LoadModule: "dri2"
[    14.234] (II) Module "dri2" already built-in
[    14.234] (II) LoadModule: "glamoregl"
[    14.246] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    14.526] (II) Module glamoregl: vendor="X.Org Foundation"
[    14.526] 	compiled for 1.14.0, module version = 0.5.0
[    14.526] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.526] (II) LoadModule: "glx"
[    14.533] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.580] (II) Module glx: vendor="X.Org Foundation"
[    14.580] 	compiled for 1.14.0, module version = 1.0.0
[    14.580] 	ABI class: X.Org Server Extension, version 7.0
[    14.580] (==) AIGLX enabled
[    14.581] Loading extension GLX
[    14.581] (==) Matched intel as autoconfigured driver 0
[    14.581] (==) Matched intel as autoconfigured driver 1
[    14.581] (==) Matched vesa as autoconfigured driver 2
[    14.582] (==) Matched modesetting as autoconfigured driver 3
[    14.582] (==) Matched fbdev as autoconfigured driver 4
[    14.582] (==) Assigned the driver to the xf86ConfigLayout
[    14.582] (II) LoadModule: "intel"
[    14.582] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.651] (II) Module intel: vendor="X.Org Foundation"
[    14.651] 	compiled for 1.14.0, module version = 2.21.4
[    14.651] 	Module class: X.Org Video Driver
[    14.651] 	ABI class: X.Org Video Driver, version 14.1
[    14.651] (II) LoadModule: "vesa"
[    14.651] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    14.661] (II) Module vesa: vendor="X.Org Foundation"
[    14.661] 	compiled for 1.14.0, module version = 2.3.2
[    14.661] 	Module class: X.Org Video Driver
[    14.661] 	ABI class: X.Org Video Driver, version 14.1
[    14.661] (II) LoadModule: "modesetting"
[    14.662] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.666] (II) Module modesetting: vendor="X.Org Foundation"
[    14.666] 	compiled for 1.14.0, module version = 0.6.0
[    14.666] 	Module class: X.Org Video Driver
[    14.666] 	ABI class: X.Org Video Driver, version 14.1
[    14.666] (II) LoadModule: "fbdev"
[    14.666] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    14.673] (II) Module fbdev: vendor="X.Org Foundation"
[    14.673] 	compiled for 1.14.0, module version = 0.4.3
[    14.673] 	Module class: X.Org Video Driver
[    14.673] 	ABI class: X.Org Video Driver, version 14.1
[    14.673] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    14.674] (II) VESA: driver for VESA chipsets: vesa
[    14.674] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.674] (II) FBDEV: driver for framebuffer: fbdev
[    14.674] (++) using VT number 7

[    14.680] (WW) Falling back to old probe method for vesa
[    14.680] (WW) Falling back to old probe method for modesetting
[    14.680] (WW) Falling back to old probe method for fbdev
[    14.680] (II) Loading sub module "fbdevhw"
[    14.680] (II) LoadModule: "fbdevhw"
[    14.680] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    14.690] (II) Module fbdevhw: vendor="X.Org Foundation"
[    14.690] 	compiled for 1.14.0, module version = 0.0.2
[    14.690] 	ABI class: X.Org Video Driver, version 14.1
[    14.690] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.690] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    14.690] (==) intel(0): RGB weight 888
[    14.690] (==) intel(0): Default visual is TrueColor
[    14.690] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[    14.690] (**) intel(0): Relaxed fencing disabled
[    14.690] (**) intel(0): Wait on SwapBuffers? enabled
[    14.690] (**) intel(0): Triple buffering? enabled
[    14.690] (**) intel(0): Framebuffer tiled
[    14.690] (**) intel(0): Pixmaps tiled
[    14.690] (**) intel(0): 3D buffers tiled
[    14.708] (**) intel(0): SwapBuffers wait enabled
[    14.708] (==) intel(0): video overlay key set to 0x101fe
[    14.708] (II) intel(0): Output LVDS1 has no monitor section
[    14.708] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    19.852] (II) intel(0): Output VGA1 has no monitor section
[    20.211] (II) intel(0): Output TV1 has no monitor section
[    20.211] (II) intel(0): EDID for output LVDS1
[    20.211] (II) intel(0): Manufacturer: AUO  Model: f06  Serial#: 0
[    20.211] (II) intel(0): Year: 2004  Week: 1
[    20.211] (II) intel(0): EDID Version: 1.2
[    20.211] (II) intel(0): Digital Display Input
[    20.211] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[    20.211] (II) intel(0): Gamma: 2.20
[    20.211] (II) intel(0): No DPMS capabilities specified
[    20.211] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.211] (II) intel(0): First detailed timing is preferred mode
[    20.211] (II) intel(0): redX: 0.566 redY: 0.321   greenX: 0.320 greenY: 0.537
[    20.211] (II) intel(0): blueX: 0.155 blueY: 0.143   whiteX: 0.313 whiteY: 0.329
[    20.211] (II) intel(0): Manufacturer's mask: 0
[    20.211] (II) intel(0): Supported detailed timing:
[    20.211] (II) intel(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[    20.211] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    20.211] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    20.211] (II) intel(0): Unknown vendor-specific block f
[    20.211] (II) intel(0):  AUO
[    20.211] (II) intel(0):  B150XG01V2
[    20.211] (II) intel(0): EDID (in hex):
[    20.211] (II) intel(0): 	00ffffffffffff0006af060f00000000
[    20.211] (II) intel(0): 	010e0102801e17780a12e59152528927
[    20.211] (II) intel(0): 	24505400000001010101010101010101
[    20.211] (II) intel(0): 	01010101010164190040410026301888
[    20.211] (II) intel(0): 	360030e4100000180000000f00067708
[    20.211] (II) intel(0): 	ff010f052e2dff053f01000000fe0041
[    20.211] (II) intel(0): 	554f0a202020202020202020000000fe
[    20.211] (II) intel(0): 	00423135305847303156320a202000dd
[    20.211] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    20.211] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    20.211] (II) intel(0): Printing probed modes for output LVDS1
[    20.211] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[    20.211] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    20.211] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    20.211] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    29.975] (II) intel(0): EDID for output VGA1
[    30.334] (II) intel(0): EDID for output TV1
[    30.334] (II) intel(0): Output LVDS1 connected
[    30.334] (II) intel(0): Output VGA1 disconnected
[    30.334] (II) intel(0): Output TV1 disconnected
[    30.334] (II) intel(0): Using exact sizes for initial modes
[    30.334] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    30.334] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    30.334] (II) intel(0): Kernel page flipping support detected, enabling
[    30.334] (==) intel(0): DPI set to (96, 96)
[    30.334] (II) Loading sub module "fb"
[    30.334] (II) LoadModule: "fb"
[    30.334] (II) Loading /usr/lib/xorg/modules/libfb.so
[    30.351] (II) Module fb: vendor="X.Org Foundation"
[    30.351] 	compiled for 1.14.0, module version = 1.0.0
[    30.351] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    30.351] (II) Loading sub module "dri2"
[    30.351] (II) LoadModule: "dri2"
[    30.351] (II) Module "dri2" already built-in
[    30.351] (II) UnloadModule: "vesa"
[    30.351] (II) Unloading vesa
[    30.351] (II) UnloadModule: "modesetting"
[    30.351] (II) Unloading modesetting
[    30.351] (II) UnloadModule: "fbdev"
[    30.351] (II) Unloading fbdev
[    30.351] (II) UnloadSubModule: "fbdevhw"
[    30.351] (II) Unloading fbdevhw
[    30.352] (==) Depth 24 pixmap format is 32 bpp
[    30.365] (II) intel(0): [DRI2] Setup complete
[    30.365] (II) intel(0): [DRI2]   DRI driver: i915
[    30.365] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    30.386] (II) UXA(0): Driver registered support for the following operations:
[    30.386] (II)         solid
[    30.386] (II)         copy
[    30.386] (II)         composite (RENDER acceleration)
[    30.386] (II)         put_image
[    30.386] (II)         get_image
[    30.386] (==) intel(0): Backing store disabled
[    30.386] (==) intel(0): Silken mouse enabled
[    30.386] (II) intel(0): Initializing HW Cursor
[    30.387] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    30.408] (==) intel(0): DPMS enabled
[    30.408] (==) intel(0): Intel XvMC decoder disabled
[    30.408] (II) intel(0): Set up textured video
[    30.408] (II) intel(0): Set up overlay video
[    30.408] (II) intel(0): direct rendering: DRI2 Enabled
[    30.408] (==) intel(0): hotplug detection: "enabled"
[    30.426] (--) RandR disabled
[    30.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.650] (II) AIGLX: enabled GLX_ARB_create_context
[    30.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    30.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    30.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    30.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.650] (II) AIGLX: Loaded and initialized i915
[    30.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.652] (II) intel(0): Setting screen physical size to 270 x 203
[    31.065] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    31.065] (**) Power Button: Applying InputClass "keyboard-layout"
[    31.065] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.065] (II) LoadModule: "evdev"
[    31.065] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.140] (II) Module evdev: vendor="X.Org Foundation"
[    31.140] 	compiled for 1.14.0, module version = 2.7.3
[    31.140] 	Module class: X.Org XInput Driver
[    31.140] 	ABI class: X.Org XInput driver, version 19.1
[    31.140] (II) Using input driver 'evdev' for 'Power Button'
[    31.140] (**) Power Button: always reports core events
[    31.140] (**) evdev: Power Button: Device: "/dev/input/event6"
[    31.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.140] (--) evdev: Power Button: Found keys
[    31.140] (II) evdev: Power Button: Configuring as keyboard
[    31.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    31.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.140] (**) Option "xkb_rules" "evdev"
[    31.140] (**) Option "xkb_model" "evdev"
[    31.140] (**) Option "xkb_layout" "de"
[    31.227] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    31.227] (**) Video Bus: Applying InputClass "keyboard-layout"
[    31.227] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.227] (II) Using input driver 'evdev' for 'Video Bus'
[    31.227] (**) Video Bus: always reports core events
[    31.227] (**) evdev: Video Bus: Device: "/dev/input/event3"
[    31.227] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.227] (--) evdev: Video Bus: Found keys
[    31.227] (II) evdev: Video Bus: Configuring as keyboard
[    31.227] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[    31.227] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.227] (**) Option "xkb_rules" "evdev"
[    31.227] (**) Option "xkb_model" "evdev"
[    31.227] (**) Option "xkb_layout" "de"
[    31.228] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[    31.228] (II) No input driver specified, ignoring this device.
[    31.228] (II) This device may have been added with another device file.
[    31.228] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    31.228] (**) Sleep Button: Applying InputClass "keyboard-layout"
[    31.228] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.228] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.228] (**) Sleep Button: always reports core events
[    31.228] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    31.228] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.228] (--) evdev: Sleep Button: Found keys
[    31.228] (II) evdev: Sleep Button: Configuring as keyboard
[    31.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[    31.228] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    31.228] (**) Option "xkb_rules" "evdev"
[    31.228] (**) Option "xkb_model" "evdev"
[    31.228] (**) Option "xkb_layout" "de"
[    31.228] (II) config/udev: Adding drm device (/dev/dri/card0)
[    31.229] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    31.229] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    31.229] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    31.229] (**) Logitech USB Receiver: always reports core events
[    31.229] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    31.229] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    31.229] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    31.229] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    31.229] (--) evdev: Logitech USB Receiver: Found relative axes
[    31.229] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    31.229] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    31.229] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    31.229] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    31.229] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.229] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1/event1"
[    31.229] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    31.229] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    31.229] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    31.229] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    31.229] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    31.229] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    31.230] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    31.230] (II) No input driver specified, ignoring this device.
[    31.230] (II) This device may have been added with another device file.
[    31.230] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    31.230] (**) Logitech USB Receiver: Applying InputClass "keyboard-layout"
[    31.230] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    31.230] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    31.230] (**) Logitech USB Receiver: always reports core events
[    31.230] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    31.230] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    31.230] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    31.230] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    31.230] (--) evdev: Logitech USB Receiver: Found relative axes
[    31.230] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    31.230] (--) evdev: Logitech USB Receiver: Found absolute axes
[    31.230] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    31.230] (--) evdev: Logitech USB Receiver: Found keys
[    31.230] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    31.230] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    31.230] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    31.230] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    31.230] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input2/event2"
[    31.230] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    31.230] (**) Option "xkb_rules" "evdev"
[    31.230] (**) Option "xkb_model" "evdev"
[    31.230] (**) Option "xkb_layout" "de"
[    31.231] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    31.231] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    31.231] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    31.231] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    31.231] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    31.231] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    31.231] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    31.231] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
[    31.231] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.231] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.231] (**) AT Translated Set 2 keyboard: always reports core events
[    31.231] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    31.231] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.231] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.231] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.231] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    31.231] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    31.231] (**) Option "xkb_rules" "evdev"
[    31.231] (**) Option "xkb_model" "evdev"
[    31.231] (**) Option "xkb_layout" "de"
[    31.232] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    31.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Synaptics touchpads"
[    31.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.232] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    31.232] (II) LoadModule: "synaptics"
[    31.232] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.245] (II) Module synaptics: vendor="X.Org Foundation"
[    31.245] 	compiled for 1.14.0, module version = 1.6.3
[    31.245] 	Module class: X.Org XInput Driver
[    31.245] 	ABI class: X.Org XInput driver, version 19.1
[    31.245] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.245] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.245] (**) Option "Device" "/dev/input/event8"
[    31.246] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.246] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.246] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.246] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.246] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    31.247] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.247] (**) Option "EmulateTwoFingerMinZ" "40"
[    31.247] (**) Option "EmulateTwoFingerMinW" "8"
[    31.247] (**) Option "VertEdgeScroll" "on"
[    31.247] (**) Option "HorizEdgeScroll" "on"
[    31.247] (**) Option "VertTwoFingerScroll" "on"
[    31.247] (**) Option "HorizTwoFingerScroll" "on"
[    31.247] (**) Option "TapButton1" "1"
[    31.247] (**) Option "TapButton2" "2"
[    31.247] (**) Option "TapButton3" "3"
[    31.247] (**) Option "CircularScrolling" "on"
[    31.247] (**) Option "CircScrollTrigger" "2"
[    31.247] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.247] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.250] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    31.250] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    31.250] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.250] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.250] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.250] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.250] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.251] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    31.251] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    31.252] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[    31.252] (**) HP WMI hotkeys: Applying InputClass "keyboard-layout"
[    31.252] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    31.252] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    31.252] (**) HP WMI hotkeys: always reports core events
[    31.252] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[    31.252] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    31.252] (--) evdev: HP WMI hotkeys: Found keys
[    31.252] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    31.252] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[    31.252] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    31.252] (**) Option "xkb_rules" "evdev"
[    31.252] (**) Option "xkb_model" "evdev"
[    31.252] (**) Option "xkb_layout" "de"
[   276.275] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event10)
[   276.275] (**) Logitech USB Keyboard: Applying InputClass "keyboard-layout"
[   276.275] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   276.275] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   276.275] (**) Logitech USB Keyboard: always reports core events
[   276.275] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event10"
[   276.275] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   276.275] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   276.275] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   276.275] (--) evdev: Logitech USB Keyboard: Found keys
[   276.275] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   276.275] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   276.275] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   276.275] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input10/event10"
[   276.275] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 14)
[   276.275] (**) Option "xkb_rules" "evdev"
[   276.275] (**) Option "xkb_model" "evdev"
[   276.275] (**) Option "xkb_layout" "de"
[   276.276] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   276.280] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   276.280] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   276.280] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   276.280] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   276.293] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event11)
[   276.293] (**) Logitech USB Keyboard: Applying InputClass "evdev pointer catchall"
[   276.293] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   276.293] (**) Logitech USB Keyboard: always reports core events
[   276.293] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event11"
[   276.293] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   276.293] (--) evdev: Logitech USB Keyboard: Found 9 mouse buttons
[   276.293] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[   276.293] (--) evdev: Logitech USB Keyboard: Found relative axes
[   276.293] (--) evdev: Logitech USB Keyboard: Found x and y relative axes
[   276.293] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   276.293] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[   276.293] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[   276.293] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   276.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.2/input/input11/event11"
[   276.293] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: MOUSE, id 15)
[   276.294] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[   276.294] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   276.294] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   276.294] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   276.294] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   276.304] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/mouse2)
[   276.304] (II) No input driver specified, ignoring this device.
[   276.304] (II) This device may have been added with another device file.
[   276.312] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event9)
[   276.312] (**) Logitech USB Keyboard: Applying InputClass "keyboard-layout"
[   276.313] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   276.313] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   276.313] (**) Logitech USB Keyboard: always reports core events
[   276.313] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event9"
[   276.313] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   276.313] (--) evdev: Logitech USB Keyboard: Found keys
[   276.313] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   276.313] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9/event9"
[   276.313] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 16)
[   276.313] (**) Option "xkb_rules" "evdev"
[   276.313] (**) Option "xkb_model" "evdev"
[   276.313] (**) Option "xkb_layout" "de"
[   278.381] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event12)
[   278.381] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[   278.381] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[   278.381] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[   278.381] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event12"
[   278.381] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
[   278.381] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[   278.381] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[   278.381] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[   278.381] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[   278.381] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[   278.381] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[   278.381] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[   278.381] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   278.381] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event12"
[   278.381] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 17)
[   278.381] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[   278.382] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[   278.382] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[   278.382] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[   278.382] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[   278.383] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse3)
[   278.383] (II) No input driver specified, ignoring this device.
[   278.383] (II) This device may have been added with another device file.
[   301.464] (II) config/udev: removing device Logitech USB-PS/2 Optical Mouse
[   301.469] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[   301.469] (II) UnloadModule: "evdev"
[wudu@Laptop ~]$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000004f7cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000004f7d0000-0x000000004f7efbff] reserved
[    0.000000] BIOS-e820: [mem 0x000000004f7efc00-0x000000004f7fafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000004f7fb000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nx6110 (PT600ET#ABD)/3088, BIOS 68DTD Ver. F.14 07/27/2006
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x4f7d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FF0000000 write-back
[    0.000000]   2 base 04F800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[    0.000000] RAMDISK: [mem 0x37ada000-0x37d64fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37573000-0x377fd68f]
[    0.000000] Move RAMDISK from [mem 0x37ada000-0x37d6468f] to [mem 0x37573000-0x377fd68f]
[    0.000000] ACPI: RSDP 000fe270 00014 (v00 HP    )
[    0.000000] ACPI: RSDT 4f7efc84 00034 (v01 HP     099C     27070620 HP   00000001)
[    0.000000] ACPI: FACP 4f7efc00 00084 (v02 HP     099C     00000002 HP   00000001)
[    0.000000] ACPI: DSDT 4f7efd50 07D78 (v01 HP       DAU00  00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 4f7fae80 00040
[    0.000000] ACPI: APIC 4f7efcb8 0005A (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 4f7efd14 0003C (v01 HP     099C     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 4f7f7ac8 00371 (v01 HP       HPQPpc 00001001 MSFT 0100000E)
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] 383MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x4f7cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x4f7cffff]
[    0.000000] On node 0 totalpages: 325471
[    0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6b82200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 768 pages used for memmap
[    0.000000]   HighMem zone: 97490 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfec01000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0x4f800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6b6d000 s32640 r0 d20608 u53248
[    0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 322927
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f7e272ab-1abd-46a4-bc88-b4e7e34ff26a ro reboot=pci
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2604544 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0004f7d0)
[    0.000000] Memory: 1278276k/1302336k available (4184k kernel code, 23608k reserved, 1679k data, 560k init, 393032k highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc15ba000 - 0xc1646000   ( 560 kB)
      .data : 0xc141613e - 0xc15b9d80   (1679 kB)
      .text : 0xc1000000 - 0xc141613e   (4184 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6406000 soft=f6408000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2128.180 MHz processor
[    0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 4258.70 BogoMIPS (lpj=7093933)
[    0.006673] pid_max: default: 32768 minimum: 301
[    0.006715] Security Framework initialized
[    0.006729] AppArmor: AppArmor disabled by boot time parameter
[    0.006742] Mount-cache hash table entries: 512
[    0.006987] Initializing cgroup subsys cpuacct
[    0.006990] Initializing cgroup subsys memory
[    0.007000] Initializing cgroup subsys devices
[    0.007002] Initializing cgroup subsys freezer
[    0.007005] Initializing cgroup subsys net_cls
[    0.007008] Initializing cgroup subsys blkio
[    0.007038] Disabled fast string operations
[    0.007046] mce: CPU supports 5 MCE banks
[    0.007055] CPU0: Thermal monitoring enabled (TM2)
[    0.007070] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[    0.012242] Freeing SMP alternatives: 16k freed
[    0.013298] ACPI: Core revision 20121018
[    0.020046] ftrace: allocating 18273 entries in 36 pages
[    0.030111] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.030555] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064771] smpboot: CPU0: Intel(R) Pentium(R) M processor 2.13GHz (fam: 06, model: 0d, stepping: 08)
[    0.066666] Performance Events: p6 PMU driver.
[    0.066666] ... version:                0
[    0.066666] ... bit width:              32
[    0.066666] ... generic registers:      2
[    0.066666] ... value mask:             00000000ffffffff
[    0.066666] ... max period:             000000007fffffff
[    0.066666] ... fixed-purpose events:   0
[    0.066666] ... event mask:             0000000000000003
[    0.084897] Brought up 1 CPUs
[    0.084900] smpboot: Total of 1 processors activated (4258.70 BogoMIPS)
[    0.086110] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.086276] devtmpfs: initialized
[    0.086527] PM: Registering ACPI NVS region [mem 0x4f7efc00-0x4f7fafff] (46080 bytes)
[    0.087748] RTC time: 21:59:10, date: 03/21/13
[    0.087802] NET: Registered protocol family 16
[    0.088007] ACPI: bus type pci registered
[    0.088081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.088086] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.088087] PCI: Using MMCONFIG for extended config space
[    0.088089] PCI: Using configuration type 1 for base access
[    0.088806] bio: create slab <bio-0> at 0
[    0.088878] ACPI: Added _OSI(Module Device)
[    0.088880] ACPI: Added _OSI(Processor Device)
[    0.088883] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088885] ACPI: Added _OSI(Processor Aggregator Device)
[    0.090103] ACPI: EC: Look up EC in DSDT
[    0.110057] ACPI: Interpreter enabled
[    0.110071] ACPI: (supports S0 S3 S4 S5)
[    0.110088] ACPI: Using IOAPIC for interrupt routing
[    0.111581] ACPI: Power Resource [C1C5] (on)
[    0.115754] ACPI: Power Resource [C249] (off)
[    0.115816] ACPI: Power Resource [C24A] (off)
[    0.115878] ACPI: Power Resource [C24B] (off)
[    0.115942] ACPI: Power Resource [C24C] (off)
[    0.116481] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.116618] ACPI: No dock devices found.
[    0.116626] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.120005] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.120009] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[    0.120170] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.120173] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.126886] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.126889] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.126892] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.126895] pci_root PNP0A08:00: host bridge window [mem 0x4f800000-0xfec00fff] (ignored)
[    0.126898] pci_root PNP0A08:00: host bridge window [mem 0xfec02000-0xffffffff] (ignored)
[    0.126901] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.126904] PCI: root bus 00: using default resources
[    0.126945] PCI host bridge to bus 0000:00
[    0.126949] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.126952] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.126955] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.126968] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.127014] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[    0.127024] pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd017ffff]
[    0.127031] pci 0000:00:02.0: reg 14: [io  0x2000-0x2007]
[    0.127037] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.127043] pci 0000:00:02.0: reg 1c: [mem 0xd0180000-0xd01bffff]
[    0.127075] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[    0.127083] pci 0000:00:02.1: reg 10: [mem 0xd0200000-0xd027ffff]
[    0.127167] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.127219] pci 0000:00:1d.0: reg 20: [io  0x2020-0x203f]
[    0.127259] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.127310] pci 0000:00:1d.1: reg 20: [io  0x2040-0x205f]
[    0.127351] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.127402] pci 0000:00:1d.2: reg 20: [io  0x2060-0x207f]
[    0.127442] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.127493] pci 0000:00:1d.3: reg 20: [io  0x2080-0x209f]
[    0.127543] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.127566] pci 0000:00:1d.7: reg 10: [mem 0xd0280000-0xd02803ff]
[    0.127663] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.127689] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.127775] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[    0.127795] pci 0000:00:1e.2: reg 10: [io  0x2100-0x21ff]
[    0.127807] pci 0000:00:1e.2: reg 14: [io  0x2200-0x223f]
[    0.127819] pci 0000:00:1e.2: reg 18: [mem 0xd0281000-0xd02811ff]
[    0.127830] pci 0000:00:1e.2: reg 1c: [mem 0xd0282000-0xd02820ff]
[    0.127889] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.127911] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[    0.127931] pci 0000:00:1e.3: reg 10: [io  0x2400-0x24ff]
[    0.127942] pci 0000:00:1e.3: reg 14: [io  0x2500-0x257f]
[    0.128019] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.128044] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.128146] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.128156] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.128162] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.128167] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0500-057f
[    0.128190] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.128206] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.128218] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.128229] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.128241] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.128253] pci 0000:00:1f.1: reg 20: [io  0x2580-0x258f]
[    0.128337] pci 0000:02:04.0: [14e4:4320] type 00 class 0x028000
[    0.128354] pci 0000:02:04.0: reg 10: [mem 0xd0000000-0xd0001fff]
[    0.128441] pci 0000:02:06.0: [104c:8031] type 02 class 0x060700
[    0.128466] pci 0000:02:06.0: reg 10: [mem 0xd0002000-0xd0002fff]
[    0.128507] pci 0000:02:06.0: supports D1 D2
[    0.128510] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128538] pci 0000:02:06.2: [104c:8032] type 00 class 0x0c0010
[    0.128563] pci 0000:02:06.2: reg 10: [mem 0xd0003000-0xd00037ff]
[    0.128577] pci 0000:02:06.2: reg 14: [mem 0xd0004000-0xd0007fff]
[    0.128678] pci 0000:02:06.2: supports D1 D2
[    0.128680] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[    0.128725] pci 0000:02:0e.0: [14e4:170c] type 00 class 0x020000
[    0.128745] pci 0000:02:0e.0: reg 10: [mem 0xd0008000-0xd0009fff]
[    0.128835] pci 0000:02:0e.0: supports D1 D2
[    0.128837] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128876] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.128884] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.128892] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.128895] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.128941] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.128947] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.128950] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.128955] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.128967] pci_bus 0000:00: on NUMA node 0
[    0.128980] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
[    0.129109] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.140329] ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
[    0.140419] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[    0.140506] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[    0.140592] ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
[    0.140674] ACPI: PCI Interrupt Link [C0EE] (IRQs 10 11) *0, disabled.
[    0.140761] ACPI: PCI Interrupt Link [C0EF] (IRQs 10 *11)
[    0.140847] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
[    0.140926] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
[    0.141024] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.141028] vgaarb: loaded
[    0.141030] vgaarb: bridge control possible 0000:00:02.0
[    0.141077] PCI: Using ACPI for IRQ routing
[    0.150927] PCI: pci_cache_line_size set to 64 bytes
[    0.150984] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.150987] e820: reserve RAM buffer [mem 0x4f7d0000-0x4fffffff]
[    0.151108] NetLabel: Initializing
[    0.151110] NetLabel:  domain hash size = 128
[    0.151111] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.151127] NetLabel:  unlabeled traffic allowed by default
[    0.151265] hpet clockevent registered
[    0.151269] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.151275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.151280] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.156680] Switching to clocksource hpet
[    0.163641] pnp: PnP ACPI init
[    0.163672] ACPI: bus type pnp registered
[    0.163909] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.163914] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.163917] system 00:00: [mem 0x00100000-0x4f7fffff] could not be reserved
[    0.163923] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.164289] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.164304] pnp 00:02: [dma 4]
[    0.164329] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.164362] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.164410] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.164449] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.164487] pnp 00:06: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
[    0.164651] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.164655] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.164659] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.164663] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165267] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.165271] system 00:08: [io  0x1000-0x107f] has been reserved
[    0.165274] system 00:08: [io  0x1100-0x113f] has been reserved
[    0.165277] system 00:08: [io  0x1200-0x121f] has been reserved
[    0.165280] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.165284] system 00:08: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.165287] system 00:08: [mem 0xfed20000-0xff41ffff] could not be reserved
[    0.165290] system 00:08: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.165294] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165534] system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.165537] system 00:09: [mem 0xfec01000-0xfec01fff] has been reserved
[    0.165542] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165556] pnp: PnP ACPI: found 10 devices
[    0.165557] ACPI: ACPI bus type pnp unregistered
[    0.202301] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.202304] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.202309] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.202314] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.202318] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000
[    0.202326] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.202329] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.202337] pci 0000:00:1e.0: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[    0.202341] pci 0000:00:1e.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.202346] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.202350] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.202353] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.202356] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.202359] pci 0000:02:06.0: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
[    0.202363] pci 0000:02:06.0: BAR 16: assigned [mem 0x54000000-0x57ffffff]
[    0.202366] pci 0000:02:06.0: BAR 13: assigned [io  0x3000-0x30ff]
[    0.202369] pci 0000:02:06.0: BAR 14: assigned [io  0x3400-0x34ff]
[    0.202372] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.202375] pci 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[    0.202381] pci 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[    0.202387] pci 0000:02:06.0:   bridge window [mem 0x50000000-0x53ffffff pref]
[    0.202393] pci 0000:02:06.0:   bridge window [mem 0x54000000-0x57ffffff]
[    0.202399] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.202403] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.202410] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.202415] pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x53ffffff pref]
[    0.202435] pci 0000:00:1e.0: setting latency timer to 64
[    0.202462] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.202465] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.202468] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.202471] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.202474] pci_bus 0000:02: resource 2 [mem 0x50000000-0x53ffffff pref]
[    0.202476] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.202479] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.202482] pci_bus 0000:03: resource 0 [io  0x3000-0x30ff]
[    0.202485] pci_bus 0000:03: resource 1 [io  0x3400-0x34ff]
[    0.202488] pci_bus 0000:03: resource 2 [mem 0x50000000-0x53ffffff pref]
[    0.202491] pci_bus 0000:03: resource 3 [mem 0x54000000-0x57ffffff]
[    0.202544] NET: Registered protocol family 2
[    0.202738] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.202802] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.202866] TCP: Hash tables configured (established 8192 bind 8192)
[    0.202910] TCP: reno registered
[    0.202914] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.202930] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.203011] NET: Registered protocol family 1
[    0.203030] pci 0000:00:02.0: Boot video device
[    0.203192] PCI: CLS 64 bytes, default 64
[    0.203261] Unpacking initramfs...
[    0.272577] Freeing initrd memory: 2604k freed
[    0.275107] apm: BIOS not found.
[    0.275516] audit: initializing netlink socket (disabled)
[    0.275543] type=2000 audit(1363903149.273:1): initialized
[    0.287655] bounce pool size: 64 pages
[    0.287670] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.289700] VFS: Disk quotas dquot_6.5.2
[    0.289765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.290039] msgmni has been set to 1734
[    0.290290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.290320] io scheduler noop registered
[    0.290322] io scheduler deadline registered
[    0.290330] io scheduler cfq registered (default)
[    0.290516] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.290518] vesafb: scrolling: redraw
[    0.290521] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.290692] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
[    0.320687] Console: switching to colour frame buffer device 128x48
[    0.350525] fb0: VESA VGA frame buffer device
[    0.350556] intel_idle: does not run on family 6 model 13
[    0.350599] GHES: HEST is not enabled!
[    0.350614] isapnp: Scanning for PnP cards...
[    0.663512] isapnp: No Plug & Play device found
[    0.663562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.664216] i8042: PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12
[    0.665817] i8042: Detected active multiplexing controller, rev 1.1
[    0.666477] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.666512] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.666540] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.666571] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.666598] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.666720] mousedev: PS/2 mouse device common for all mice
[    0.666815] rtc_cmos 00:04: RTC can wake from S4
[    0.666968] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.667002] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.667029] cpuidle: using governor ladder
[    0.667031] cpuidle: using governor menu
[    0.667033] EFI Variables Facility v0.08 2004-May-17
[    0.667064] drop_monitor: Initializing network drop monitor service
[    0.667176] TCP: cubic registered
[    0.667312] NET: Registered protocol family 10
[    0.667532] NET: Registered protocol family 17
[    0.667547] Key type dns_resolver registered
[    0.667669] Using IPI No-Shortcut mode
[    0.667764] PM: Hibernation image not present or could not be loaded.
[    0.667776] registered taskstats version 1
[    0.668205]   Magic number: 5:231:1006
[    0.668234] system 00:08: hash matches
[    0.668324] rtc_cmos 00:04: setting system clock to 2013-03-21 21:59:10 UTC (1363903150)
[    0.668596] Freeing unused kernel memory: 560k freed
[    0.668860] Write protecting the kernel text: 4188k
[    0.668885] Write protecting the kernel read-only data: 1284k
[    0.679157] systemd-udevd[39]: starting version 198
[    0.688188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.732792] ACPI: bus type usb registered
[    0.732829] usbcore: registered new interface driver usbfs
[    0.732845] usbcore: registered new interface driver hub
[    0.736995] usbcore: registered new device driver usb
[    0.737682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.738049] uhci_hcd: USB Universal Host Controller Interface driver
[    0.738112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.738117] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.738125] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.738181] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002020
[    0.738907] ehci-pci: EHCI PCI platform driver
[    0.739151] hub 1-0:1.0: USB hub found
[    0.739157] hub 1-0:1.0: 2 ports detected
[    0.739354] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.739359] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.739366] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    0.739412] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00002040
[    0.739587] hub 2-0:1.0: USB hub found
[    0.739591] hub 2-0:1.0: 2 ports detected
[    0.739742] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.739746] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.739753] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    0.739789] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
[    0.739947] hub 3-0:1.0: USB hub found
[    0.739951] hub 3-0:1.0: 2 ports detected
[    0.740141] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.740145] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.740152] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    0.740166] ehci-pci 0000:00:1d.7: debug port 1
[    0.748361] SCSI subsystem initialized
[    0.750628] ACPI: bus type scsi registered
[    0.752306] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.752320] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0280000
[    0.753601] libata version 3.00 loaded.
[    0.760039] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.760273] hub 4-0:1.0: USB hub found
[    0.760281] hub 4-0:1.0: 8 ports detected
[    0.761042] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.761047] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.761055] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.761101] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00002080
[    0.761256] hub 5-0:1.0: USB hub found
[    0.761261] hub 5-0:1.0: 2 ports detected
[    0.761788] ata_piix 0000:00:1f.1: version 2.13
[    0.761851] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.765347] scsi0 : ata_piix
[    0.768935] scsi1 : ata_piix
[    0.769004] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2580 irq 14
[    0.769006] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2588 irq 15
[    0.772252] ata2: port disabled--ignoring
[    0.800106] firewire_ohci 0000:02:06.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.040383] ata1.00: ATA-6: ST94011A, 5.11, max UDMA/100
[    1.040386] ata1.00: 78140160 sectors, multi 16: LBA48 
[    1.040410] ata1.01: ATAPI: SONY CD-RW/DVD-ROM CRX835E, KPK4, max MWDMA2
[    1.053582] ata1.00: configured for UDMA/100
[    1.066946] ata1.01: configured for MWDMA2
[    1.067378] scsi 0:0:0:0: Direct-Access     ATA      ST94011A         5.11 PQ: 0 ANSI: 5
[    1.068184] scsi 0:0:1:0: CD-ROM            SONY     CD-RW  CRX835E   KPK4 PQ: 0 ANSI: 5
[    1.071434] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.071487] sd 0:0:0:0: [sda] Write Protect is off
[    1.071490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.071513] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.276681] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    1.276688] Switching to clocksource tsc
[    1.291703]  sda: sda1 sda2 sda3
[    1.292471] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[    1.292474] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.292608] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.293410] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[    1.293709] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.300319] firewire_core 0000:02:06.2: created device fw0: GUID 718b500029491ca6, S400
[    1.482953] usbcore: registered new interface driver usbhid
[    1.482958] usbhid: USB HID core driver
[    1.483314] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
[    1.483810] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    1.488289] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input2
[    1.488733] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    1.834706] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.572841] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[    2.716719] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.769692] systemd[1]: Set hostname to <Laptop>.
[    3.523934] systemd[1]: Cannot add dependency job for unit lastmin.service, ignoring: Unit lastmin.service failed to load: No such file or directory. See system logs and 'systemctl status lastmin.service' for details.
[    3.523954] systemd[1]: Cannot add dependency job for unit autologin@tty1.service, ignoring: Unit autologin@tty1.service failed to load: No such file or directory. See system logs and 'systemctl status autologin@tty1.service' for details.
[    3.524216] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.524303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.524319] systemd[1]: Starting Login Prompts.
[    3.525332] systemd[1]: Reached target Login Prompts.
[    3.525346] systemd[1]: Starting Remote File Systems.
[    3.525698] systemd[1]: Reached target Remote File Systems.
[    3.525712] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.526127] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.526140] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.526570] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.526583] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.527041] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.527054] systemd[1]: Starting Delayed Shutdown Socket.
[    3.527431] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.527445] systemd[1]: Starting Journal Socket.
[    3.527804] systemd[1]: Listening on Journal Socket.
[    3.527824] systemd[1]: Starting Setup Virtual Console...
[    3.577823] systemd[1]: Starting Apply Kernel Variables...
[    3.633550] systemd[1]: Mounting Huge Pages File System...
[    3.670097] systemd[1]: Starting Journal Service...
[    3.671344] systemd[1]: Started Journal Service.
[    3.722287] systemd[1]: Starting Load Kernel Modules...
[    4.066161] systemd[1]: Mounting Debug File System...
[    4.068021] systemd[1]: Mounting POSIX Message Queue File System...
[    4.070213] systemd[1]: Starting udev Kernel Socket.
[    4.070575] systemd[1]: Listening on udev Kernel Socket.
[    4.070646] systemd[1]: Starting udev Control Socket.
[    4.070994] systemd[1]: Listening on udev Control Socket.
[    4.071061] systemd[1]: Starting udev Kernel Device Manager...
[    4.073680] systemd[1]: Starting udev Coldplug all Devices...
[    4.076838] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.076905] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.076921] systemd[1]: Starting Encrypted Volumes.
[    4.077314] systemd[1]: Reached target Encrypted Volumes.
[    4.077343] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.078020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.121858] systemd[1]: Started Set Up Additional Binary Formats.
[    4.121889] systemd[1]: Expecting device dev-disk-by\x2duuid-68030114\x2dd494\x2d4a26\x2d86d4\x2d4e74afbad634.device...
[    4.122524] systemd[1]: Starting File System Check on Root Device...
[    4.123680] systemd[1]: Mounting Temporary Directory...
[    4.151887] systemd[1]: Expecting device dev-disk-by\x2duuid-b500d968\x2d4cd3\x2d41df\x2d896c\x2db9ae0ed280c7.device...
[    4.154282] systemd[1]: Started Apply Kernel Variables.
[    4.214414] systemd-udevd[102]: starting version 198
[    5.572334] EXT4-fs (sda2): re-mounted. Opts: (null)
[    6.011571] ACPI: Video Device [C055] (multi-head: yes  rom: no  post: no)
[    6.011649] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    6.051961] wmi: Mapper loaded
[    6.269744] ACPI: AC Adapter [C172] (on-line)
[    6.296028] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    6.319664] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.368343] ACPI: Requesting acpi_cpufreq
[    6.402562] thermal LNXTHERM:00: registered as thermal_zone0
[    6.402567] ACPI: Thermal Zone [TZ1] (54 C)
[    6.402668] ACPI: Fan [C24D] (off)
[    6.402910] ACPI: Fan [C24E] (off)
[    6.403165] ACPI: Fan [C24F] (off)
[    6.403705] ACPI: Fan [C250] (off)
[    6.423209] thermal LNXTHERM:01: registered as thermal_zone1
[    6.423213] ACPI: Thermal Zone [TZ2] (41 C)
[    6.427560] ACPI: Battery Slot [C174] (battery present)
[    6.427637] ACPI: Battery Slot [C173] (battery absent)
[    6.427863] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    6.428198] ACPI: Sleep Button [C1E8]
[    6.428661] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    6.428734] ACPI: Lid Switch [C1E9]
[    6.442703] thermal LNXTHERM:02: registered as thermal_zone2
[    6.442709] ACPI: Thermal Zone [TZ3] (29 C)
[    6.448315] thermal LNXTHERM:03: registered as thermal_zone3
[    6.448318] ACPI: Thermal Zone [TZ4] (28 C)
[    6.467493] tsc: Marking TSC unstable due to TSC halts in idle
[    6.467562] ACPI: acpi_idle registered with cpuidle
[    6.470183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    6.470221] Switching to clocksource hpet
[    6.470275] ACPI: Power Button [PWRF]
[    6.705083] intel_rng: FWH not detected
[    6.708123] Linux agpgart interface v0.103
[    6.732500] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    6.732554] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    6.733081] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    6.734308] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    6.749306] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C002.C003.C086 1 (20121018/utaddress-251)
[    6.749318] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.749325] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C002.C003.C097 1 (20121018/utaddress-251)
[    6.749334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.749338] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C002.C003.C097 1 (20121018/utaddress-251)
[    6.749346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.749350] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.774738] input: HP WMI hotkeys as /devices/virtual/input/input7
[    6.800616] iTCO_vendor_support: vendor-support=0
[    6.801501] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.801535] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[    6.802383] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.957041] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[    7.027902] [drm] Initialized drm 1.1.0 20060810
[    7.191265] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:099c]
[    7.191300] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[    7.191307] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[    7.191319] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[    7.325212] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 35334
[    7.325231] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    7.364448] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    7.420851] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
[    7.420864] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[    7.420873] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[    7.420891] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[    7.420900] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff:
[    7.422413]  excluding 0x3000-0x30ff 0x3400-0x34ff
[    7.429208] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd00fffff]
[    7.429219] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd00fffff:
[    7.429227]  excluding 0xd0000000-0xd000ffff
[    7.429254] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x50000000-0x53ffffff pref]
[    7.429263] pcmcia_socket pcmcia_socket0: cs: memory probe 0x50000000-0x53ffffff:
[    7.429286]  excluding 0x50000000-0x53ffffff
[    7.429940] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[    7.429954] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[    7.429965] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[    7.429975] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[    7.429986] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[    7.429996] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[    7.439082] ssb: Sonics Silicon Backplane found on PCI device 0000:02:04.0
[    7.524014] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[    7.524031] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[    7.524043] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[    7.524053] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[    7.556663] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[    7.558125]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[    7.558921] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[    7.559319]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[    7.559713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[    7.561290] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[    7.561622]  clean.
[    7.561683] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[    7.562338]  clean.
[    7.562395] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    7.562404]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[    7.562476] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    7.562507]  clean.
[    7.562555] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    7.562585]  clean.
[    7.562633] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[    7.563306]  clean.
[    7.566074] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[    7.582883] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:12:79:be:fe:79
[    7.876093] Adding 979928k swap on /dev/sda1.  Priority:-1 extents:1 across:979928k 
[    7.877809] intel8x0_measure_ac97_clock: measured 53656 usecs (2585 samples)
[    7.877816] intel8x0: clocking to 48000
[    7.885263] snd_intel8x0m 0000:00:1e.3: setting latency timer to 64
[    7.897397] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    7.897399] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    7.902124] Console: switching to colour dummy device 80x25
[    7.902433] i915 0000:00:02.0: setting latency timer to 64
[    7.904099] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.904100] [drm] Driver supports precise vblank timestamp query.
[    7.904165] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.081041] [drm] initialized overlay support
[    8.633382] Raw EDID:
[    8.633403]  	d0 ff ff ff ff 20 bd f7 5c 7c 2f f7 36 7f 3b 5b
[    8.633418]  	77 7f bf 0b f9 ff 77 73 cf 0f 3b 1f cf fc 7c 8e
[    8.633433]  	16 cf df 9f 9f bf a9 c7 ff 9b 3f 3b c7 ff 9d 9c
[    8.633447]  	3b bf 9d 3f be 0d 83 3d 7e bf 9b 3f 9e 7f bf 3f
[    8.633462]  	39 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e
[    8.633476]  	51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
[    8.633490]  	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
[    8.633505]  	00 48 39 58 51 32 30 31 37 35 32 0a 20 20 00 cf
[    8.674014] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    8.768859] systemd-journald[96]: Received SIGUSR1
[    8.816722] Raw EDID:
[    8.816740]  	d0 ff ff ff ff 20 bd f7 5c 7c 2f f7 36 7f 3b 5b
[    8.816755]  	77 7f bf 0b f9 ff 77 73 cf 0f 3b 1f cf fc 7c 8e
[    8.816769]  	16 cf df 9f 9f bf a9 c7 ff 9b 3f 3b c7 ff 9d 9c
[    8.816784]  	3b bf 9d 3f be 0d 83 3d 7e bf 9b 3f 9e 7f bf 3f
[    8.816798]  	39 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e
[    8.816812]  	51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
[    8.816827]  	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
[    8.816841]  	00 48 39 58 51 32 30 31 37 35 32 0a 20 20 00 cf
[    9.023388] Raw EDID:
[    9.023406]  	d0 ff ff ff ff 20 bd f7 5c 7c 2f f7 36 7f 3b 5b
[    9.023421]  	77 7f bf 0b f9 ff 77 73 cf 0f 3b 1f cf fc 7c 8e
[    9.023436]  	16 cf df 9f 9f bf a9 c7 ff 9b 3f 3b c7 ff 9d 9c
[    9.023450]  	3b bf 9d 3f be 0d 83 3d 7e bf 9b 3f 9e 7f bf 3f
[    9.023465]  	39 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e
[    9.023479]  	51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
[    9.023493]  	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
[    9.023508]  	00 48 39 58 51 32 30 31 37 35 32 0a 20 20 00 cf
[    9.170067] Raw EDID:
[    9.170086]  	d0 ff ff ff ff 20 bd f7 5c 7c 2f f7 36 7f 3b 5b
[    9.170101]  	77 7f bf 0b f9 ff 77 73 cf 0f 3b 1f cf fc 7c 8e
[    9.170116]  	16 cf df 9f 9f bf a9 c7 ff 9b 3f 3b c7 ff 9d 9c
[    9.170130]  	3b bf 9d 3f be 0d 83 3d 7e bf 9b 3f 9e 7f bf 3f
[    9.170145]  	39 00 da 28 11 00 00 1a 00 00 00 fd 00 38 4b 1e
[    9.170159]  	51 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
[    9.170173]  	79 6e 63 4d 61 73 74 65 72 0a 20 20 00 00 00 ff
[    9.170188]  	00 48 39 58 51 32 30 31 37 35 32 0a 20 20 00 cf
[    9.170210] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
[    9.364849] systemd[1]: PID file /var/run/haveged.pid not readable (yet?) after start.
[   10.137482] fbcon: inteldrmfb (fb0) is primary device
[   10.183408] Console: switching to colour frame buffer device 128x48
[   10.192568] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.192575] i915 0000:00:02.0: registered panic notifier
[   10.192590] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.898774] systemd-logind[232]: Watching system buttons on /dev/input/event6 (Power Button)
[   10.899033] systemd-logind[232]: Watching system buttons on /dev/input/event3 (Video Bus)
[   10.899271] systemd-logind[232]: Watching system buttons on /dev/input/event5 (Lid Switch)
[   10.899509] systemd-logind[232]: Watching system buttons on /dev/input/event4 (Sleep Button)
[   13.653665] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.350249] b44 ssb1:0 eth0: Link is up at 100 Mbps, full duplex
[   17.350261] b44 ssb1:0 eth0: Flow control is off for TX and off for RX
[   17.350369] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  275.580068] usb 1-1: new full-speed USB device number 3 using uhci_hcd
[  275.727808] hub 1-1:1.0: USB hub found
[  275.729669] hub 1-1:1.0: 4 ports detected
[  276.004686] usb 1-1.1: new full-speed USB device number 4 using uhci_hcd
[  276.166899] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
[  276.167304] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[  276.205977] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input10
[  276.206360] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input1
[  276.224290] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.2/input/input11
[  276.224886] hid-generic 0003:046D:C31C.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input2
[  278.224764] usb 1-1.2: new low-speed USB device number 5 using uhci_hcd
[  278.372141] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
[  278.372868] hid-generic 0003:046D:C050.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[  301.460533] usb 1-1.2: USB disconnect, device number 5

Offline

#4 2013-03-21 17:36:35

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

All clean there, as far as I can tell,

run as root

cat /sys/kernel/debug/dri/0/i915_error_state

what does it say ?

If it says no error state collected than it shouldn't be a video driver  issue, probably related to either interrupts or high CPU usage. The easiest thing is to watch for processes that consumes a lot of CPU time with top utility. You could install smartmontools and do

smartctl -a /dev/sda

and check for any signs of errors.

If all of this fails, you could try to increase verbosity in dmesg as explained here: https://wiki.archlinux.org/index.php/Boot_Debugging

But be warned, increasing log levels gives a lot of debugging info so please, paste it to a file and attach it here if it comes down to that.

/edit: reboot=pci kernel parameter, you intentionaly added that, had any problems before ?

Last edited by combuster (2013-03-21 17:38:53)

Offline

#5 2013-03-21 18:17:51

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

First of all, thanks for helping.

cat /sys/kernel/debug/dri/0/i915_error_state gives no error state collected.
smartctl -a /dev/sda gives me some pre-fail warnings but all values are above the threshold. Waiting for the long self test to finish...

Will try the verbosity thing later this day or tomorrow.

Rebooting ended with a message "Power down" or so. Laptop still running but nothing happened anymore and reboot=pci was the solution for this.

Offline

#6 2013-03-21 20:13:27

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

OK, I've found this (look at the end of the bug report)

https://bugzilla.kernel.org/show_bug.cgi?id=43267

and this

https://bugzilla.kernel.org/show_bug.cgi?id=51161

I was hoping that we will see any of the GPU hung messages in dmesg, are you sure that those are the messages when display freezed out at least once ?

One last thing you could try is to enable SNA: https://wiki.archlinux.org/index.php/In … ion_method

Last edited by combuster (2013-03-21 20:24:56)

Offline

#7 2013-03-22 04:35:43

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

It seems that I made a mistake looking for the cause of the freezes. Shame on me.

It's hard to tell if there's a short freeze when watching pacman updating the system or watching a video on youtube so I was moving the mouse constantly. This way I knew that it happens if the mouse pointer stops moving.
So these freezes just happen when moving the mouse. There's no difference between touchpad and usb mouse. It seems that there are also extremely short freezes when I hold a key pressed but I'm not 100% sure about that.

So I think this couldn't be a problem with the graphics card. Perhaps some interrupt thing.
It definely happens every 10 - 11 seconds but only if I move the mouse. It doesn't matter if I stop moving the mouse between two freezes. So there has to happen something periodical which causes this but only if I move the mouse (or pess a key).

I tried with nothing else than top running in lxterminal after starting Openbox with CPU idle at 96%. Then I ran stress and had the same behaviour at 100% CPU load (also same time between freezes).

Offline

#8 2013-03-22 06:34:15

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

OK this is a stretch (because you report that the same thing happens with usb mouse) but try with some of these kernel parameters (in the same way as reboot=pci)

i8042.noaux     [HW] Don't check for auxiliary (== mouse) port

i8042.nomux     [HW] Don't check presence of an active multiplexing
                             controller
i8042.nopnp     [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
                             controllers
       
i8042.reset     [HW] Reset the controller during init and cleanup

most of all reset and nomux.

Offline

#9 2013-03-23 12:42:18

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

Hi
I tried all these options but that changed  anything. So I decided to blacklist all the modules not needed for booting and finally the i915.
After blacklisting i915 there was no freeze anymore. So the problem has to do directly with the i915 driver.

What I did then was looking which module options got set in Lubuntu and changed those on arch to fit.
No success with that. Then I figured out that on arch there is an option Lubuntu doesn't have. It's called preliminary_hw_support. No plan what this does. It was set to 0 so I tried with setting it to 1 but no difference.

The kernel version Lubuntu uses on my installation is 3.5 so perhaps there was a change or arch/Lubuntu pached this driver?

Offline

#10 2013-03-23 21:09:58

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

Preliminary hw support is support for Haswell and Valley View IGP's - so this shouldn't have any effect on your setup.

I don't know what you could do next except this:

debug ignore_loglevel log_buf_len=10M print_fatal_signals=1 LOGLEVEL=8 earlyprintk=vga,keep sched_debug

to add next to the reboot=pci kernel parameter. Brace yourself for some serious printk flooding, when output starts to freeze do a:

dmesg > ~/dmesg.txt and attach this file somewhere for us to see.

I suggest you add these lines in grub by pressing key "E" on the Arch Linux menu item. If you do this in grub.cfg you will have it on the next bootup and I don't think you want this debug level as default smile

If we don't find any errors in logs there is no way we could have the slightest idea what's wrong.

Offline

#11 2013-03-26 15:38:36

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

Did that. Here's the file: http://www.speedshare.org/download.php?id=8A16573C1

Edit: When I don't blacklist i915 openbox needs ~20 seconds to start after login. With i915 blacklisted it needs ~5 seconds.

Last edited by wudu (2013-03-26 15:47:07)

Offline

#12 2013-03-26 17:58:11

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

OK I've missed corrupted EDID message sad

I don't know why it tries to load EDID from VGA1 output when I presume you have only LVDS connected (laptop screen).

What does

xrandr --query --verbose

give ? If it reads that VGA-1 is connected (and it isn't) try to disable VGA-1 output with video=VGA-1:d kernel parameter.

I don't know if you gave a chance for video to freeze when you posted dmesg.txt, cause it's showing only 22sec since the kernel image loaded... You would have to wait at least couple of minutes before doing dmesg > dmesg.txt for eventual error to show up in dmesg.

Spurious TV/VGA output detection was giving me headaches back in the days with the 965GM chipset, had to do the exact same thing with video kernel parameter.

Also you could try to fire up KMS early as described in https://wiki.archlinux.org/index.php/In … Setting.29

Offline

#13 2013-03-26 19:49:13

wudu
Member
Registered: 2010-03-08
Posts: 78

Re: [solved] Graphic output freezes every ~12 seconds

OMG, I had my KVM switch connected all the time. Did that after I got the laptop but I didn't really use it because it just cloned the output and streched it to the higher resolution what made it fuzzy. When I switch to the port the laptop is connected at the problem suddenly stops so it seems that I have a buggy KVM switch (though I have no problems with other devices).

I'm sorry for not thinking about that and wasting your time on this.
Thanks, I greatly appreciate your effort.

Offline

#14 2013-03-26 21:55:35

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: [solved] Graphic output freezes every ~12 seconds

No problem wudu, if I had noticed EDID error on VGA-1 for the first time you've posted dmesg output we would find the culprit already smile Most important is that both of us learned something new in the process and that the problem is solved...

/edit: Try to swap VGA cable from laptop to KVM and see if that helps, maybe it's damaged...

Last edited by combuster (2013-03-26 21:58:29)

Offline

Board footer

Powered by FluxBB