You are not logged in.

#1 2013-03-21 21:29:29

AxGS
Member
From: Mexico
Registered: 2011-11-06
Posts: 12
Website

Screen flickering and system freezes when using Nouveau driver.

I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.

I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.

dmesg output:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM         , BIOS R01-B4 06/15/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[    0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[    0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[    0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[    0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[    0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 57ff0000 00040
[    0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[    0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[    0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 519MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x57feffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x57feffff]
[    0.000000] On node 0 totalpages: 360319
[    0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1040 pages used for memmap
[    0.000000]   HighMem zone: 132066 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[    0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 357503
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2883328 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[    0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc15ba000 - 0xc1646000   ( 560 kB)
      .data : 0xc141613e - 0xc15b9d80   (1679 kB)
      .text : 0xc1000000 - 0xc141613e   (4184 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1908.551 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[    0.003343] pid_max: default: 32768 minimum: 301
[    0.003404] Security Framework initialized
[    0.003415] AppArmor: AppArmor disabled by boot time parameter
[    0.003432] Mount-cache hash table entries: 512
[    0.006819] Initializing cgroup subsys cpuacct
[    0.006822] Initializing cgroup subsys memory
[    0.006834] Initializing cgroup subsys devices
[    0.006837] Initializing cgroup subsys freezer
[    0.006840] Initializing cgroup subsys net_cls
[    0.006842] Initializing cgroup subsys blkio
[    0.006879] CPU: Physical Processor ID: 0
[    0.006882] CPU: Processor Core ID: 0
[    0.006885] mce: CPU supports 5 MCE banks
[    0.006896] LVT offset 0 assigned for vector 0xf9
[    0.006902] process: using AMD E400 aware idle routine
[    0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[    0.007021] Freeing SMP alternatives: 16k freed
[    0.007977] ACPI: Core revision 20121018
[    0.015366] ftrace: allocating 18273 entries in 36 pages
[    0.023490] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[    0.059999] Performance Events: AMD PMU driver.
[    0.059999] ... version:                0
[    0.059999] ... bit width:              48
[    0.059999] ... generic registers:      4
[    0.059999] ... value mask:             0000ffffffffffff
[    0.059999] ... max period:             00007fffffffffff
[    0.059999] ... fixed-purpose events:   0
[    0.059999] ... event mask:             000000000000000f
[    0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[    0.083412] smpboot: Booting Node   0, Processors  #1 OK
[    0.006666] Initializing CPU#1
[    0.176732] Brought up 2 CPUs
[    0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[    0.177423] devtmpfs: initialized
[    0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[    0.178162] RTC time: 21:06:38, date: 03/21/13
[    0.178225] NET: Registered protocol family 16
[    0.178397] node 0 link 0: io port [8000, ffff]
[    0.178401] TOM: 0000000060000000 aka 1536M
[    0.178404] node 0 link 0: mmio [a0000, bffff]
[    0.178408] node 0 link 0: mmio [60000000, efffffff]
[    0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[    0.178418] bus: [bus 00-04] on node 0 link 0
[    0.178421] bus: 00 [io  0x0000-0xffff]
[    0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[    0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[    0.178495] ACPI: bus type pci registered
[    0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.178581] PCI: Using MMCONFIG for extended config space
[    0.178583] PCI: Using configuration type 1 for base access
[    0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.178679] mtrr: probably your BIOS does not setup all CPUs.
[    0.178681] mtrr: corrected configuration.
[    0.180670] bio: create slab <bio-0> at 0
[    0.180670] ACPI: Added _OSI(Module Device)
[    0.180670] ACPI: Added _OSI(Processor Device)
[    0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[    0.181260] ACPI: EC: Look up EC in DSDT
[    0.186070] ACPI: Interpreter enabled
[    0.186077] ACPI: (supports S0 S3 S4 S5)
[    0.186098] ACPI: Using IOAPIC for interrupt routing
[    0.193127] ACPI: No dock devices found.
[    0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[    0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.195031] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
[    0.195034] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
[    0.195037] pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff] (ignored)
[    0.195040] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
[    0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[    0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[    0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[    0.195057] pci_root PNP0A08:00: host bridge window [io  0x4700-0x470b] (ignored)
[    0.195060] pci_root PNP0A08:00: host bridge window [io  0x1c00-0x1c80] (ignored)
[    0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[    0.195066] PCI: root bus 00: hardware-probed resources
[    0.195117] PCI host bridge to bus 0000:00
[    0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[    0.195124] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[    0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[    0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.195397] pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc3f]
[    0.195414] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.195421] pci 0000:00:01.1: reg 24: [io  0xf400-0xf43f]
[    0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[    0.195564] pci 0000:00:02.0: supports D1 D2
[    0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[    0.195639] pci 0000:00:02.1: supports D1 D2
[    0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[    0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.195814] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.195860] pci 0000:00:08.0: reg 10: [io  0x09f0-0x09f7]
[    0.195866] pci 0000:00:08.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.195872] pci 0000:00:08.0: reg 18: [io  0x0970-0x0977]
[    0.195877] pci 0000:00:08.0: reg 1c: [io  0x0b70-0x0b73]
[    0.195883] pci 0000:00:08.0: reg 20: [io  0xdc00-0xdc0f]
[    0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[    0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.195932] pci 0000:00:08.1: reg 10: [io  0x09e0-0x09e7]
[    0.195938] pci 0000:00:08.1: reg 14: [io  0x0be0-0x0be3]
[    0.195944] pci 0000:00:08.1: reg 18: [io  0x0960-0x0967]
[    0.195949] pci 0000:00:08.1: reg 1c: [io  0x0b60-0x0b63]
[    0.195955] pci 0000:00:08.1: reg 20: [io  0xc800-0xc80f]
[    0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[    0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[    0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[    0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[    0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[    0.196412] pci 0000:01:09.0: supports D1 D2
[    0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[    0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.196448] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.196452] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.196456] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.196459] pci 0000:00:04.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.196462] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.196465] pci 0000:00:04.0:   bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[    0.196469] pci 0000:00:04.0:   bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[    0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.196498] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.196501] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.196506] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[    0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[    0.196575] pci 0000:03:00.0: reg 18: [io  0x9c00-0x9cff]
[    0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.196648] pci 0000:03:00.0: supports D1 D2
[    0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.203357] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.203361] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.203365] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.203394] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.203398] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.203402] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.203413] pci_bus 0000:00: on NUMA node 0
[    0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[    0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[    0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[    0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[    0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[    0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[    0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[    0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[    0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[    0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245086] vgaarb: loaded
[    0.245086] vgaarb: bridge control possible 0000:00:0d.0
[    0.245086] PCI: Using ACPI for IRQ routing
[    0.246696] PCI: pci_cache_line_size set to 64 bytes
[    0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[    0.246902] NetLabel: Initializing
[    0.246904] NetLabel:  domain hash size = 128
[    0.246906] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.246923] NetLabel:  unlabeled traffic allowed by default
[    0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.256702] Switching to clocksource hpet
[    0.264319] pnp: PnP ACPI init
[    0.264346] ACPI: bus type pnp registered
[    0.264605] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.264609] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.264613] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.264616] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.264620] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.264623] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[    0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[    0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.265431] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.265434] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.265438] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.265458] pnp 00:02: [dma 4]
[    0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[    0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[    0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[    0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[    0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[    0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.267589] pnp: PnP ACPI: found 14 devices
[    0.267590] ACPI: ACPI bus type pnp unregistered
[    0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[    0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.305603] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.305608] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.305612] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfd8fffff pref]
[    0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.305621] pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
[    0.305625] pci 0000:00:09.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.305629] pci 0000:00:09.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[    0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.305641] pci 0000:00:0b.0:   bridge window [io  0x9000-0x9fff]
[    0.305645] pci 0000:00:0b.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.305649] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.305657] pci 0000:00:0c.0:   bridge window [io  0x8000-0x8fff]
[    0.305661] pci 0000:00:0c.0:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.305665] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.305677] pci 0000:00:04.0: setting latency timer to 64
[    0.305686] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[    0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[    0.305699] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[    0.305709] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[    0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[    0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[    0.305722] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.305732] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.305742] pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
[    0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.305804] NET: Registered protocol family 2
[    0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[    0.306184] TCP: reno registered
[    0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.306279] NET: Registered protocol family 1
[    0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.370606] pci 0000:00:0d.0: Boot video device
[    0.370621] PCI: CLS 64 bytes, default 64
[    0.370687] Unpacking initramfs...
[    0.455995] Freeing initrd memory: 2900k freed
[    0.459106] apm: BIOS not found.
[    0.459448] audit: initializing netlink socket (disabled)
[    0.459468] type=2000 audit(1363899998.456:1): initialized
[    0.474029] bounce pool size: 64 pages
[    0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.476263] VFS: Disk quotas dquot_6.5.2
[    0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.476593] msgmni has been set to 1731
[    0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.477042] io scheduler noop registered
[    0.477044] io scheduler deadline registered
[    0.477053] io scheduler cfq registered (default)
[    0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.477471] vesafb: scrolling: redraw
[    0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[    0.484141] Console: switching to colour frame buffer device 80x30
[    0.490611] fb0: VESA VGA frame buffer device
[    0.490704] GHES: HEST is not enabled!
[    0.490719] isapnp: Scanning for PnP cards...
[    0.802592] isapnp: No Plug & Play device found
[    0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.845087] mousedev: PS/2 mouse device common for all mice
[    0.845182] rtc_cmos 00:04: RTC can wake from S4
[    0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.845435] cpuidle: using governor ladder
[    0.845437] cpuidle: using governor menu
[    0.845439] EFI Variables Facility v0.08 2004-May-17
[    0.845489] drop_monitor: Initializing network drop monitor service
[    0.845593] TCP: cubic registered
[    0.845736] NET: Registered protocol family 10
[    0.845940] NET: Registered protocol family 17
[    0.845958] Key type dns_resolver registered
[    0.846129] Using IPI No-Shortcut mode
[    0.846264] PM: Hibernation image not present or could not be loaded.
[    0.846279] registered taskstats version 1
[    0.846851]   Magic number: 5:851:146
[    0.846912] acpi device:17: hash matches
[    0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[    0.847246] Freeing unused kernel memory: 560k freed
[    0.847645] Write protecting the kernel text: 4188k
[    0.847679] Write protecting the kernel read-only data: 1284k
[    0.858078] systemd-udevd[45]: starting version 198
[    0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.904637] ACPI: bus type usb registered
[    0.904681] usbcore: registered new interface driver usbfs
[    0.904697] usbcore: registered new interface driver hub
[    0.904815] usbcore: registered new device driver usb
[    0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.910252] ehci-pci: EHCI PCI platform driver
[    0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[    0.912040] SCSI subsystem initialized
[    0.915768] ACPI: bus type scsi registered
[    0.918637] libata version 3.00 loaded.
[    0.962268] hub 1-0:1.0: USB hub found
[    0.962279] hub 1-0:1.0: 10 ports detected
[    0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[    0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[    0.962559] ehci-pci 0000:00:02.1: debug port 1
[    0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.970261] hub 2-0:1.0: USB hub found
[    0.970268] hub 2-0:1.0: 10 ports detected
[    0.970681] pata_amd 0000:00:06.0: version 0.4.1
[    0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.971618] scsi0 : pata_amd
[    0.972200] scsi1 : pata_amd
[    0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.972517] sata_nv 0000:00:08.0: version 3.5
[    0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[    0.973161] scsi2 : sata_nv
[    0.973470] scsi3 : sata_nv
[    0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[    0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[    0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[    0.974209] scsi4 : sata_nv
[    0.974369] scsi5 : sata_nv
[    0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[    0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[    1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[    1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[    1.143604] ata1.00: configured for UDMA/66
[    1.149515] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM_GSA-H40N  RA00 PQ: 0 ANSI: 5
[    1.149876] ata2: port disabled--ignoring
[    1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[    1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[    1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[    1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[    1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[    1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[    1.936808] usbcore: registered new interface driver usbhid
[    1.936814] usbhid: USB HID core driver
[    2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[    2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.120325] ata6.00: configured for UDMA/133
[    2.120524] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[    2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[    2.125119] sd 5:0:0:0: [sda] Write Protect is off
[    2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.146217]  sda: sda1 sda2 sda3
[    2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[    2.407819] Initializing USB Mass Storage driver...
[    2.408184] scsi6 : usb-storage 1-8:1.0
[    2.408335] usbcore: registered new interface driver usb-storage
[    2.408337] USB Mass Storage support registered.
[    2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[    3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.097800] systemd[1]: Set hostname to <acer-aspire>.
[    3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[    3.353005] systemd[1]: Starting Remote File Systems.
[    3.353024] systemd[1]: Reached target Remote File Systems.
[    3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[    3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.353274] systemd[1]: Starting Journal Socket.
[    3.353366] systemd[1]: Listening on Journal Socket.
[    3.354821] systemd[1]: Starting Apply Kernel Variables...
[    3.357143] systemd[1]: Mounting Huge Pages File System...
[    3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[    3.370154] systemd[1]: Mounting Debug File System...
[    3.385832] systemd[1]: Starting Journal Service...
[    3.393610] systemd[1]: Started Journal Service.
[    3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[    3.407389] systemd[1]: Starting Encrypted Volumes.
[    3.407409] systemd[1]: Reached target Encrypted Volumes.
[    3.407431] systemd[1]: Starting Setup Virtual Console...
[    3.410492] systemd[1]: Starting udev Kernel Socket.
[    3.410553] systemd[1]: Listening on udev Kernel Socket.
[    3.410641] systemd[1]: Starting udev Control Socket.
[    3.410689] systemd[1]: Listening on udev Control Socket.
[    3.410760] systemd[1]: Starting udev Coldplug all Devices...
[    3.417037] systemd[1]: Starting udev Kernel Device Manager...
[    3.418761] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.436758] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.441505] systemd[1]: Started Load Kernel Modules.
[    3.441546] systemd[1]: Mounted FUSE Control File System.
[    3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.441693] systemd[1]: Mounting Configuration File System...
[    3.465751] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.505747] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[    3.553856] systemd[1]: Mounting Temporary Directory...
[    3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    3.744908] systemd-udevd[126]: starting version 198
[    3.777101] systemd[1]: Started File System Check on Root Device.
[    3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.790819] systemd[1]: Started udev Kernel Device Manager.
[    3.800185] systemd[1]: Started Apply Kernel Variables.
[    4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    4.205364] systemd-journald[122]: Received SIGUSR1
[    5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[    5.423033] ACPI: Thermal Zone [THRM] (40 C)
[    5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    5.484570] ACPI: Power Button [PWRB]
[    5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.484697] ACPI: Power Button [PWRF]
[    5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[    5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[    5.547898] Linux agpgart interface v0.103
[    5.558914] ACPI: Fan [FAN] (on)
[    5.559089] [drm] Initialized drm 1.1.0 20060810
[    5.565468] microcode: AMD CPU family 0xf not supported
[    5.567533] microcode: AMD CPU family 0xf not supported
[    5.642735] wmi: Mapper loaded
[    5.645076] kvm: Nested Virtualization enabled
[    5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[    5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[    5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[    5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[    5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[    5.685594] Console: switching to colour dummy device 80x25
[    5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[    5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[    5.686707] nouveau  [  DEVICE][0000:00:0d.0] BOOT0  : 0x04c000a2
[    5.686715] nouveau  [  DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[    5.686722] nouveau  [  DEVICE][0000:00:0d.0] Family : NV40
[    5.687642] nouveau  [   VBIOS][0000:00:0d.0] checking PRAMIN for image...
[    5.733281] nouveau  [   VBIOS][0000:00:0d.0] ... appears to be valid
[    5.733287] nouveau  [   VBIOS][0000:00:0d.0] using image from PRAMIN
[    5.733560] nouveau  [   VBIOS][0000:00:0d.0] BIT signature found
[    5.733565] nouveau  [   VBIOS][0000:00:0d.0] version 05.61.32.25.04
[    5.733746] nouveau  [     PFB][0000:00:0d.0] RAM type: unknown
[    5.733749] nouveau  [     PFB][0000:00:0d.0] RAM size: 128 MiB
[    5.733752] nouveau  [     PFB][0000:00:0d.0]    ZCOMP: 0 tags
[    5.761373] [TTM] Zone  kernel: Available graphics memory: 443504 kiB
[    5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[    5.761381] [TTM] Initializing pool allocator
[    5.761831] nouveau  [     DRM] VRAM: 125 MiB
[    5.761838] nouveau  [     DRM] GART: 512 MiB
[    5.761844] nouveau  [     DRM] BIT BIOS found
[    5.761848] nouveau  [     DRM] Bios version 05.61.32.25
[    5.761852] nouveau  [     DRM] TMDS table version 1.1
[    5.761855] nouveau  [     DRM] DCB version 3.0
[    5.761859] nouveau  [     DRM] DCB outp 00: 01000310 00000023
[    5.761863] nouveau  [     DRM] DCB outp 01: 00110204 98830003
[    5.761865] nouveau  [     DRM] DCB conn 00: 0000
[    5.761869] nouveau  [     DRM] DCB conn 01: 1131
[    5.761872] nouveau  [     DRM] DCB conn 02: 0110
[    5.761875] nouveau  [     DRM] DCB conn 03: 0111
[    5.761877] nouveau  [     DRM] DCB conn 04: 0113
[    5.762420] nouveau W[     DRM] DCB type 4 not known
[    5.762425] nouveau W[     DRM] Unknown-1 has no encoders, removing
[    5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.763283] [drm] No driver support for vblank timestamp query.
[    5.763931] nouveau  [     DRM] 1 available performance level(s)
[    5.763937] nouveau  [     DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[    5.763939] nouveau  [     DRM] c:
[    5.765435] nouveau  [     DRM] MM: using M2MF for buffer copies
[    5.811870] sky2: driver version 1.30
[    5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[    5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[    5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[    5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[    5.814804] composite sync not supported
[    5.815267] nouveau  [     DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[    5.815425] fbcon: nouveaufb (fb0) is primary device
[    5.829143] IT8726 SuperIO detected.
[    5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[    5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    5.856121] ppdev: user-space parallel port driver
[    5.877128] Console: switching to colour frame buffer device 180x56
[    5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[    5.878929] nouveau 0000:00:0d.0: registered panic notifier
[    5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[    5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[    5.879730] hda_intel: Disabling MSI
[    5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[    6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[    6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[    6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[    6.533068] Adding 997756k swap on /dev/sda3.  Priority:-1 extents:1 across:997756k 
[    6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[    6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[    7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[    7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[    7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[    7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[    7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[    7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[    7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[    7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[    8.208529] composite sync not supported
[    8.244451] composite sync not supported
[    8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[    8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   20.811802] composite sync not supported
[   23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[   84.047784] usb 1-4: USB disconnect, device number 2
[   85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[   85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[   85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[  389.250323] composite sync not supported

Xorg log:

[     7.949] 
X.Org X Server 1.14.0
Release Date: 2013-03-05
[     7.949] X Protocol Version 11, Revision 0
[     7.949] Build Operating System: Linux 3.8.2-1-ARCH i686 
[     7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[     7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[     7.949] Build Date: 09 March 2013  11:46:22AM
[     7.949]  
[     7.949] Current version of pixman: 0.28.2
[     7.949] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.949] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[     7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.001] (==) No Layout section.  Using the first Screen section.
[     8.001] (==) No screen section available. Using defaults.
[     8.001] (**) |-->Screen "Default Screen Section" (0)
[     8.001] (**) |   |-->Monitor "<default monitor>"
[     8.011] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.011] (==) Automatically adding devices
[     8.011] (==) Automatically enabling devices
[     8.011] (==) Automatically adding GPU devices
[     8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     8.060] 	Entry deleted from font path.
[     8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     8.060] 	Entry deleted from font path.
[     8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     8.060] 	Entry deleted from font path.
[     8.060] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     8.060] 	Entry deleted from font path.
[     8.060] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     8.060] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[     8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.060] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.069] (II) Loader magic: 0x825b620
[     8.069] (II) Module ABI versions:
[     8.069] 	X.Org ANSI C Emulation: 0.4
[     8.069] 	X.Org Video Driver: 14.1
[     8.069] 	X.Org XInput driver : 19.1
[     8.069] 	X.Org Server Extension : 7.0
[     8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[     8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[     8.073] Initializing built-in extension Generic Event Extension
[     8.073] Initializing built-in extension SHAPE
[     8.073] Initializing built-in extension MIT-SHM
[     8.073] Initializing built-in extension XInputExtension
[     8.073] Initializing built-in extension XTEST
[     8.073] Initializing built-in extension BIG-REQUESTS
[     8.073] Initializing built-in extension SYNC
[     8.073] Initializing built-in extension XKEYBOARD
[     8.073] Initializing built-in extension XC-MISC
[     8.073] Initializing built-in extension SECURITY
[     8.073] Initializing built-in extension XINERAMA
[     8.073] Initializing built-in extension XFIXES
[     8.073] Initializing built-in extension RENDER
[     8.073] Initializing built-in extension RANDR
[     8.073] Initializing built-in extension COMPOSITE
[     8.073] Initializing built-in extension DAMAGE
[     8.073] Initializing built-in extension MIT-SCREEN-SAVER
[     8.073] Initializing built-in extension DOUBLE-BUFFER
[     8.073] Initializing built-in extension RECORD
[     8.073] Initializing built-in extension DPMS
[     8.073] Initializing built-in extension X-Resource
[     8.073] Initializing built-in extension XVideo
[     8.073] Initializing built-in extension XVideo-MotionCompensation
[     8.073] Initializing built-in extension XFree86-VidModeExtension
[     8.073] Initializing built-in extension XFree86-DGA
[     8.073] Initializing built-in extension XFree86-DRI
[     8.073] Initializing built-in extension DRI2
[     8.073] (II) LoadModule: "glx"
[     8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.133] (II) Module glx: vendor="X.Org Foundation"
[     8.133] 	compiled for 1.14.0, module version = 1.0.0
[     8.133] 	ABI class: X.Org Server Extension, version 7.0
[     8.133] (==) AIGLX enabled
[     8.134] Loading extension GLX
[     8.134] (==) Matched nouveau as autoconfigured driver 0
[     8.134] (==) Matched nvidia as autoconfigured driver 1
[     8.134] (==) Matched nv as autoconfigured driver 2
[     8.134] (==) Matched nouveau as autoconfigured driver 3
[     8.134] (==) Matched nvidia as autoconfigured driver 4
[     8.134] (==) Matched nv as autoconfigured driver 5
[     8.134] (==) Matched vesa as autoconfigured driver 6
[     8.134] (==) Matched modesetting as autoconfigured driver 7
[     8.134] (==) Matched fbdev as autoconfigured driver 8
[     8.134] (==) Assigned the driver to the xf86ConfigLayout
[     8.134] (II) LoadModule: "nouveau"
[     8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     8.154] (II) Module nouveau: vendor="X.Org Foundation"
[     8.154] 	compiled for 1.14.0, module version = 1.0.6
[     8.154] 	Module class: X.Org Video Driver
[     8.154] 	ABI class: X.Org Video Driver, version 14.1
[     8.154] (II) LoadModule: "nvidia"
[     8.155] (WW) Warning, couldn't open module nvidia
[     8.155] (II) UnloadModule: "nvidia"
[     8.155] (II) Unloading nvidia
[     8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[     8.155] (II) LoadModule: "nv"
[     8.155] (WW) Warning, couldn't open module nv
[     8.155] (II) UnloadModule: "nv"
[     8.155] (II) Unloading nv
[     8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[     8.155] (II) LoadModule: "vesa"
[     8.156] (WW) Warning, couldn't open module vesa
[     8.156] (II) UnloadModule: "vesa"
[     8.156] (II) Unloading vesa
[     8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[     8.156] (II) LoadModule: "modesetting"
[     8.156] (WW) Warning, couldn't open module modesetting
[     8.156] (II) UnloadModule: "modesetting"
[     8.156] (II) Unloading modesetting
[     8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     8.157] (II) LoadModule: "fbdev"
[     8.157] (WW) Warning, couldn't open module fbdev
[     8.157] (II) UnloadModule: "fbdev"
[     8.157] (II) Unloading fbdev
[     8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     8.157] (II) NOUVEAU driver 
[     8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[     8.157] 	RIVA TNT        (NV04)
[     8.157] 	RIVA TNT2       (NV05)
[     8.157] 	GeForce 256     (NV10)
[     8.157] 	GeForce 2       (NV11, NV15)
[     8.157] 	GeForce 4MX     (NV17, NV18)
[     8.157] 	GeForce 3       (NV20)
[     8.158] 	GeForce 4Ti     (NV25, NV28)
[     8.158] 	GeForce FX      (NV3x)
[     8.158] 	GeForce 6       (NV4x)
[     8.158] 	GeForce 7       (G7x)
[     8.158] 	GeForce 8       (G8x)
[     8.158] 	GeForce GTX 200 (NVA0)
[     8.158] 	GeForce GTX 400 (NVC0)
[     8.158] (++) using VT number 7

[     8.175] (II) [drm] nouveau interface version: 1.1.0
[     8.175] (II) Loading sub module "dri"
[     8.175] (II) LoadModule: "dri"
[     8.175] (II) Module "dri" already built-in
[     8.175] (II) NOUVEAU(0): Loaded DRI module
[     8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[     8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     8.175] (==) NOUVEAU(0): RGB weight 888
[     8.175] (==) NOUVEAU(0): Default visual is TrueColor
[     8.175] (==) NOUVEAU(0): Using HW cursor
[     8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[     8.175] (==) NOUVEAU(0): Page flipping enabled
[     8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[     8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     8.244] (II) NOUVEAU(0): EDID for output VGA-1
[     8.244] (II) NOUVEAU(0): Manufacturer: ACR  Model: ada8  Serial#: 1937803344
[     8.244] (II) NOUVEAU(0): Year: 2007  Week: 38
[     8.244] (II) NOUVEAU(0): EDID Version: 1.3
[     8.244] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[     8.244] (II) NOUVEAU(0): Sync:  Separate  Composite
[     8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[     8.245] (II) NOUVEAU(0): Gamma: 2.20
[     8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     8.245] (II) NOUVEAU(0): Default color space is primary color space
[     8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[     8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349   greenX: 0.328 greenY: 0.547
[     8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138   whiteX: 0.313 whiteY: 0.329
[     8.245] (II) NOUVEAU(0): Supported established timings:
[     8.245] (II) NOUVEAU(0): 720x400@70Hz
[     8.245] (II) NOUVEAU(0): 640x480@60Hz
[     8.245] (II) NOUVEAU(0): 640x480@67Hz
[     8.245] (II) NOUVEAU(0): 640x480@72Hz
[     8.245] (II) NOUVEAU(0): 640x480@75Hz
[     8.245] (II) NOUVEAU(0): 800x600@56Hz
[     8.245] (II) NOUVEAU(0): 800x600@60Hz
[     8.245] (II) NOUVEAU(0): 800x600@72Hz
[     8.245] (II) NOUVEAU(0): 800x600@75Hz
[     8.245] (II) NOUVEAU(0): 832x624@75Hz
[     8.245] (II) NOUVEAU(0): 1024x768@60Hz
[     8.245] (II) NOUVEAU(0): 1024x768@70Hz
[     8.245] (II) NOUVEAU(0): 1024x768@75Hz
[     8.245] (II) NOUVEAU(0): 1152x864@75Hz
[     8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[     8.245] (II) NOUVEAU(0): Supported standard timings:
[     8.245] (II) NOUVEAU(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[     8.245] (II) NOUVEAU(0): #1: hsize: 1280  vsize 800  refresh: 75  vid: 3969
[     8.245] (II) NOUVEAU(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[     8.245] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[     8.245] (II) NOUVEAU(0): Supported detailed timing:
[     8.245] (II) NOUVEAU(0): clock: 106.5 MHz   Image Size:  367 x 229 mm
[     8.245] (II) NOUVEAU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[     8.245] (II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[     8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[     8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[     8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[     8.245] (II) NOUVEAU(0): EDID (in hex):
[     8.245] (II) NOUVEAU(0): 	00ffffffffffff000472a8ad50888073
[     8.245] (II) NOUVEAU(0): 	261101036c251778ee10d59759548c27
[     8.246] (II) NOUVEAU(0): 	235054bfee8081c0810f9500950f0101
[     8.246] (II) NOUVEAU(0): 	0101010101019a29a0d0518422305098
[     8.246] (II) NOUVEAU(0): 	36006fe510000006000000fd00384c1f
[     8.246] (II) NOUVEAU(0): 	5315000a202020202020000000fc0041
[     8.246] (II) NOUVEAU(0): 	63657220414c31373136570a000000ff
[     8.246] (II) NOUVEAU(0): 	004c41383034303334343330330a00aa
[     8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 +hsync +vsync (55.9 kHz eP)
[     8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[     8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.246] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     8.246] (II) NOUVEAU(0): Output VGA-1 connected
[     8.246] (II) NOUVEAU(0): Using exact sizes for initial modes
[     8.246] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
[     8.247] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     8.247] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[     8.247] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 +hsync +vsync (55.9 kHz eP)
[     8.247] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     8.247] (**) NOUVEAU(0):  Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[     8.247] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[     8.247] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[     8.247] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     8.247] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[     8.247] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[     8.247] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[     8.247] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     8.247] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[     8.247] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.248] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[     8.248] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     8.248] (==) NOUVEAU(0): DPI set to (96, 96)
[     8.248] (II) Loading sub module "fb"
[     8.248] (II) LoadModule: "fb"
[     8.248] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.284] (II) Module fb: vendor="X.Org Foundation"
[     8.284] 	compiled for 1.14.0, module version = 1.0.0
[     8.284] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.284] (II) Loading sub module "exa"
[     8.284] (II) LoadModule: "exa"
[     8.284] (II) Loading /usr/lib/xorg/modules/libexa.so
[     8.294] (II) Module exa: vendor="X.Org Foundation"
[     8.294] 	compiled for 1.14.0, module version = 2.6.0
[     8.294] 	ABI class: X.Org Video Driver, version 14.1
[     8.294] (II) Loading sub module "shadowfb"
[     8.294] (II) LoadModule: "shadowfb"
[     8.294] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     8.301] (II) Module shadowfb: vendor="X.Org Foundation"
[     8.301] 	compiled for 1.14.0, module version = 1.0.0
[     8.301] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.301] (--) Depth 24 pixmap format is 32 bpp
[     8.303] (II) NOUVEAU(0): Opened GPU channel 0
[     8.305] (II) NOUVEAU(0): [DRI2] Setup complete
[     8.306] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     8.306] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     8.333] (II) EXA(0): Driver allocated offscreen pixmaps
[     8.333] (II) EXA(0): Driver registered support for the following operations:
[     8.333] (II)         Solid
[     8.333] (II)         Copy
[     8.333] (II)         Composite (RENDER acceleration)
[     8.333] (II)         UploadToScreen
[     8.333] (II)         DownloadFromScreen
[     8.333] (==) NOUVEAU(0): Backing store disabled
[     8.333] (==) NOUVEAU(0): Silken mouse enabled
[     8.334] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[     8.334] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     8.334] (==) NOUVEAU(0): DPMS enabled
[     8.334] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.335] (--) RandR disabled
[     9.064] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.064] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.064] (II) AIGLX: enabled GLX_ARB_create_context
[     9.064] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     9.064] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     9.064] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.064] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.066] (II) AIGLX: Loaded and initialized nouveau
[     9.067] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.074] (II) NOUVEAU(0): NVEnterVT is called.
[     9.074] (II) NOUVEAU(0): Setting screen physical size to 380 x 238
[     9.074] resize called 1440 900
[     9.392] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     9.392] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.392] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     9.393] (II) LoadModule: "evdev"
[     9.393] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     9.407] (II) Module evdev: vendor="X.Org Foundation"
[     9.407] 	compiled for 1.14.0, module version = 2.7.3
[     9.407] 	Module class: X.Org XInput Driver
[     9.407] 	ABI class: X.Org XInput driver, version 19.1
[     9.407] (II) Using input driver 'evdev' for 'Power Button'
[     9.407] (**) Power Button: always reports core events
[     9.407] (**) evdev: Power Button: Device: "/dev/input/event3"
[     9.407] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.407] (--) evdev: Power Button: Found keys
[     9.407] (II) evdev: Power Button: Configuring as keyboard
[     9.407] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     9.407] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.407] (**) Option "xkb_rules" "evdev"
[     9.408] (**) Option "xkb_model" "evdev"
[     9.408] (**) Option "xkb_layout" "es"
[     9.486] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     9.486] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.486] (**) Power Button: Applying InputClass "Keyboard Defaults"
[     9.486] (II) Using input driver 'evdev' for 'Power Button'
[     9.486] (**) Power Button: always reports core events
[     9.486] (**) evdev: Power Button: Device: "/dev/input/event2"
[     9.487] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.487] (--) evdev: Power Button: Found keys
[     9.487] (II) evdev: Power Button: Configuring as keyboard
[     9.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     9.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     9.487] (**) Option "xkb_rules" "evdev"
[     9.487] (**) Option "xkb_model" "evdev"
[     9.487] (**) Option "xkb_layout" "es"
[     9.488] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event4)
[     9.488] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[     9.488] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[     9.488] (**) PIXART USB OPTICAL MOUSE: always reports core events
[     9.488] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4"
[     9.488] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[     9.488] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[     9.489] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[     9.489] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[     9.489] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[     9.489] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[     9.489] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[     9.489] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[     9.489] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     9.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4/event4"
[     9.489] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 8)
[     9.489] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[     9.489] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[     9.489] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[     9.489] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[     9.489] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[     9.490] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[     9.490] (II) No input driver specified, ignoring this device.
[     9.490] (II) This device may have been added with another device file.
[     9.491] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[     9.491] (II) No input driver specified, ignoring this device.
[     9.491] (II) This device may have been added with another device file.
[     9.491] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event10)
[     9.491] (II) No input driver specified, ignoring this device.
[     9.491] (II) This device may have been added with another device file.
[     9.492] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event11)
[     9.492] (II) No input driver specified, ignoring this device.
[     9.492] (II) This device may have been added with another device file.
[     9.493] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event12)
[     9.493] (II) No input driver specified, ignoring this device.
[     9.493] (II) This device may have been added with another device file.
[     9.493] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event13)
[     9.493] (II) No input driver specified, ignoring this device.
[     9.493] (II) This device may have been added with another device file.
[     9.494] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[     9.494] (II) No input driver specified, ignoring this device.
[     9.494] (II) This device may have been added with another device file.
[     9.494] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7)
[     9.494] (II) No input driver specified, ignoring this device.
[     9.495] (II) This device may have been added with another device file.
[     9.495] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[     9.495] (II) No input driver specified, ignoring this device.
[     9.495] (II) This device may have been added with another device file.
[     9.496] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[     9.496] (II) No input driver specified, ignoring this device.
[     9.496] (II) This device may have been added with another device file.
[     9.496] (II) config/udev: Adding drm device (/dev/dri/card0)
[     9.497] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     9.497] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.497] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[     9.497] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.497] (**) AT Translated Set 2 keyboard: always reports core events
[     9.497] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     9.497] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     9.497] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     9.497] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     9.497] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     9.498] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[     9.498] (**) Option "xkb_rules" "evdev"
[     9.498] (**) Option "xkb_model" "evdev"
[     9.498] (**) Option "xkb_layout" "es"
[     9.499] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[     9.499] (II) No input driver specified, ignoring this device.
[     9.499] (II) This device may have been added with another device file.
[    20.811] (II) NOUVEAU(0): EDID vendor "ACR", prod id 44456
[    20.812] (II) NOUVEAU(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[    20.812] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    20.812] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    20.812] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    20.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync +vsync (55.9 kHz eP)
[    20.812] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1280x800"x0.0  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    20.812] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    20.842] resize called 1440 900
[    24.055] (II) AIGLX: Suspending AIGLX clients for VT switch
[    24.055] (II) NOUVEAU(0): NVLeaveVT is called.
[    84.052] (II) config/udev: removing device PIXART USB OPTICAL MOUSE
[    84.052] (II) evdev: PIXART USB OPTICAL MOUSE: Close
[    84.052] (II) UnloadModule: "evdev"
[    85.831] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[    85.831] (II) No input driver specified, ignoring this device.
[    85.831] (II) This device may have been added with another device file.
[    85.832] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event4)
[    85.832] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    85.832] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[    85.832] (**) PIXART USB OPTICAL MOUSE: always reports core events
[    85.832] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4"
[    85.832] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[    85.832] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[    85.832] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[    85.833] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[    85.833] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[    85.833] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[    85.833] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[    85.833] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    85.833] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    85.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14/event4"
[    85.833] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 8)
[    85.833] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[    85.834] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    85.834] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[    85.834] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    85.834] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[   389.199] (II) AIGLX: Resuming AIGLX clients after VT switch
[   389.199] (II) NOUVEAU(0): NVEnterVT is called.
[   389.250] (II) NOUVEAU(0): EDID vendor "ACR", prod id 44456
[   389.250] (II) NOUVEAU(0): DDCModeFromDetailedTiming: 1440x900 Warning: We only handle separate sync.
[   389.250] (II) NOUVEAU(0): Using hsync ranges from config file
[   389.250] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   389.250] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   389.250] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync +vsync (55.9 kHz eP)
[   389.250] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1280x800"x0.0  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   389.250] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

If I'm missing something, please let me know.

Thanks.


Amateur game developer, who needs help with pixel art or a team for make games as a hobby.

Offline

#2 2013-03-23 09:52:38

berbae
Member
From: France
Registered: 2007-02-12
Posts: 1,128

Re: Screen flickering and system freezes when using Nouveau driver.

I have seen the same frozen system problem this morning; I use the 'nouveau' driver since yesterday.
It happened when I clicked on the firefox icon of wbar, and there is no error message in the logs; only the power button could force an unclean poweroff.
So you are not alone; I'm searching the web for infos about that. But that's not good sad

Last edited by berbae (2013-03-23 10:33:45)

Offline

#3 2013-03-23 16:12:16

berbae
Member
From: France
Registered: 2007-02-12
Posts: 1,128

Re: Screen flickering and system freezes when using Nouveau driver.

This is probably linked to 3D acceleration which is enabled by default and uses the nouveau-dri mesa driver.
From http://nouveau.freedesktop.org/wiki/MesaDrivers:

While the drivers include a significant amount of functionality and probably work on the common Linux games shipped with distributions, there are still some serious issues and they are not too optimized for performance. OpenGL applications that work at first may crash sooner or later. Some applications may crash X itself or hang the GPU. You should be prepared to face issues, and be able to recover from them yourself. If the GPU hangs, you can either reboot or suspend

So the nouveau-dri mesa driver is not stable yet; but how reliable it is in normal use, I don't know; and which applications may cause a full system crash, I don't know. Presently I only removed the wbar graphical launcher, and I will use only the openbox menu. I will see if there is no more hangs in my normal daily usage. I don't like very much this uncertainty of the nouveau dri stability, and with the broken access to virtual tty consoles introduced by the 304-84 nvidia driver, we are not very happy in these days using Nvidia gpus.

I found on the web the 'nouveau.noaccel=1' parameter which can be added to the Kernel command line to prevent the mesa dri driver to be used.
I didn't try it yet. But could someone using it tell me if videos in flash or mplayer work well with nouveau and no 3D acceleration?

Offline

#4 2013-03-27 09:55:45

berbae
Member
From: France
Registered: 2007-02-12
Posts: 1,128

Re: Screen flickering and system freezes when using Nouveau driver.

I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'

...
[    30.761] (II) UnloadModule: "nv"
[    30.761] (II) Unloading nv
[    30.761] (--) Depth 24 pixmap format is 32 bpp
[    30.762] (II) NOUVEAU(0): Opened GPU channel 0
[    30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[    30.765] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    30.765] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[    30.777] (II) EXA(0): Driver registered support for the following operations:
[    30.777] (II)         Solid
[    30.777] (II)         Copy
[    30.777] (II)         Composite (RENDER acceleration)
[    30.777] (II)         UploadToScreen
[    30.777] (II)         DownloadFromScreen
[    30.777] (==) NOUVEAU(0): Backing store disabled
[    30.777] (==) NOUVEAU(0): Silken mouse enabled
...

with 'nouveau.noaccel=1'

...
[  1191.621] (II) UnloadModule: "nv"
[  1191.621] (II) Unloading nv
[  1191.621] (--) Depth 24 pixmap format is 32 bpp
[  1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[  1191.621] (EE) NOUVEAU(0): Error initialising acceleration.  Falling back to NoAccel
[  1191.621] (==) NOUVEAU(0): Backing store disabled
[  1191.621] (==) NOUVEAU(0): Silken mouse enabled
[  1191.621] (==) NOUVEAU(0): DPMS enabled
...

So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.

Last edited by berbae (2013-03-27 10:07:42)

Offline

#5 2013-04-01 09:59:19

berbae
Member
From: France
Registered: 2007-02-12
Posts: 1,128

Re: Screen flickering and system freezes when using Nouveau driver.

Since I disabled 3D acceleration with nouveau, my system is stable again.

I am just afraid now that I get a heating issue with streaming videos resulting in automatic poweroff by the acpi "stupid" feature (it already happened once!?).

I also could not use gvim anymore due to displayed text disappearance, but I switched to gedit as a replacement for graphical text editor with tab capability and syntax coloring.

So I will keep nouveau for now, instead of nvidia 304-84.

@AxGS: Can you tell what you decided since your opening post?

Offline

Board footer

Powered by FluxBB