You are not logged in.
- Topics: Active | Unanswered
#1 2014-02-28 07:00:32
- jds02006
- Member
- Registered: 2014-02-23
- Posts: 5
X fails to display, but runs without errors with Dual-Link DVI adapter
I am trying to use a Thunderbolt to Dual-Link DVI adapter to connect to a Dell U2711 on my 10,x Macbook Pro, using Nouveau drivers. When I boot into Arch with the adapter plugged in and run `startx`, X loads its extensions, then seems to hang.
The strange thing is that (as far as I can tell) according to /var/log/Xorg.0.log, things are working fine:
[ 19.342]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 19.342] X Protocol Version 11, Revision 0
[ 19.342] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 19.342] Current Operating System: Linux archraptor 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
[ 19.342] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c908d3ee-eda7-4b54-a9ad-9c5a5e1a3985 rw quiet rootflags=data=writeback
[ 19.342] Build Date: 09 January 2014 08:47:24AM
[ 19.342]
[ 19.342] Current version of pixman: 0.32.4
[ 19.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.342] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 27 22:43:12 2014
[ 19.344] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.345] (==) No Layout section. Using the first Screen section.
[ 19.345] (==) No screen section available. Using defaults.
[ 19.345] (**) |-->Screen "Default Screen Section" (0)
[ 19.345] (**) | |-->Monitor "<default monitor>"
[ 19.346] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.346] (==) Automatically adding devices
[ 19.346] (==) Automatically enabling devices
[ 19.346] (==) Automatically adding GPU devices
[ 19.347] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.347] Entry deleted from font path.
[ 19.347] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 19.347] Entry deleted from font path.
[ 19.347] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.347] Entry deleted from font path.
[ 19.347] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.348] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.348] Entry deleted from font path.
[ 19.348] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.348] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 19.348] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.348] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.348] (II) Loader magic: 0x804c80
[ 19.348] (II) Module ABI versions:
[ 19.348] X.Org ANSI C Emulation: 0.4
[ 19.348] X.Org Video Driver: 15.0
[ 19.348] X.Org XInput driver : 20.0
[ 19.348] X.Org Server Extension : 8.0
[ 19.348] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.348] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 19.350] (--) PCI: (0:0:2:0) 8086:0166:106b:00f7 rev 9, Mem @ 0xc1400000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
[ 19.350] (--) PCI:*(0:1:0:0) 10de:0fd5:106b:00f2 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 19.350] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.350] Initializing built-in extension Generic Event Extension
[ 19.350] Initializing built-in extension SHAPE
[ 19.350] Initializing built-in extension MIT-SHM
[ 19.350] Initializing built-in extension XInputExtension
[ 19.350] Initializing built-in extension XTEST
[ 19.350] Initializing built-in extension BIG-REQUESTS
[ 19.350] Initializing built-in extension SYNC
[ 19.350] Initializing built-in extension XKEYBOARD
[ 19.350] Initializing built-in extension XC-MISC
[ 19.350] Initializing built-in extension SECURITY
[ 19.350] Initializing built-in extension XINERAMA
[ 19.350] Initializing built-in extension XFIXES
[ 19.350] Initializing built-in extension RENDER
[ 19.351] Initializing built-in extension RANDR
[ 19.351] Initializing built-in extension COMPOSITE
[ 19.351] Initializing built-in extension DAMAGE
[ 19.351] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.351] Initializing built-in extension DOUBLE-BUFFER
[ 19.351] Initializing built-in extension RECORD
[ 19.351] Initializing built-in extension DPMS
[ 19.351] Initializing built-in extension Present
[ 19.351] Initializing built-in extension DRI3
[ 19.351] Initializing built-in extension X-Resource
[ 19.351] Initializing built-in extension XVideo
[ 19.351] Initializing built-in extension XVideo-MotionCompensation
[ 19.351] Initializing built-in extension XFree86-VidModeExtension
[ 19.351] Initializing built-in extension XFree86-DGA
[ 19.351] Initializing built-in extension XFree86-DRI
[ 19.351] Initializing built-in extension DRI2
[ 19.351] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19.351] (II) LoadModule: "glx"
[ 19.352] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.362] (II) Module glx: vendor="X.Org Foundation"
[ 19.362] compiled for 1.15.0, module version = 1.0.0
[ 19.362] ABI class: X.Org Server Extension, version 8.0
[ 19.362] (==) AIGLX enabled
[ 19.362] Loading extension GLX
[ 19.362] (==) Matched nouveau as autoconfigured driver 0
[ 19.362] (==) Matched nvidia as autoconfigured driver 1
[ 19.362] (==) Matched nv as autoconfigured driver 2
[ 19.362] (==) Matched intel as autoconfigured driver 3
[ 19.362] (==) Matched nouveau as autoconfigured driver 4
[ 19.362] (==) Matched nvidia as autoconfigured driver 5
[ 19.362] (==) Matched nv as autoconfigured driver 6
[ 19.362] (==) Matched modesetting as autoconfigured driver 7
[ 19.362] (==) Matched fbdev as autoconfigured driver 8
[ 19.362] (==) Matched vesa as autoconfigured driver 9
[ 19.362] (==) Assigned the driver to the xf86ConfigLayout
[ 19.362] (II) LoadModule: "nouveau"
[ 19.363] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 19.365] (II) Module nouveau: vendor="X.Org Foundation"
[ 19.365] compiled for 1.15.0, module version = 1.0.10
[ 19.365] Module class: X.Org Video Driver
[ 19.365] ABI class: X.Org Video Driver, version 15.0
[ 19.365] (II) LoadModule: "nvidia"
[ 19.366] (WW) Warning, couldn't open module nvidia
[ 19.366] (II) UnloadModule: "nvidia"
[ 19.366] (II) Unloading nvidia
[ 19.366] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 19.366] (II) LoadModule: "nv"
[ 19.366] (WW) Warning, couldn't open module nv
[ 19.366] (II) UnloadModule: "nv"
[ 19.366] (II) Unloading nv
[ 19.366] (EE) Failed to load module "nv" (module does not exist, 0)
[ 19.366] (II) LoadModule: "intel"
[ 19.366] (WW) Warning, couldn't open module intel
[ 19.366] (II) UnloadModule: "intel"
[ 19.366] (II) Unloading intel
[ 19.366] (EE) Failed to load module "intel" (module does not exist, 0)
[ 19.366] (II) LoadModule: "modesetting"
[ 19.367] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 19.367] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.367] compiled for 1.15.0, module version = 0.8.1
[ 19.367] Module class: X.Org Video Driver
[ 19.367] ABI class: X.Org Video Driver, version 15.0
[ 19.367] (II) LoadModule: "fbdev"
[ 19.367] (WW) Warning, couldn't open module fbdev
[ 19.367] (II) UnloadModule: "fbdev"
[ 19.367] (II) Unloading fbdev
[ 19.367] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 19.367] (II) LoadModule: "vesa"
[ 19.367] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 19.368] (II) Module vesa: vendor="X.Org Foundation"
[ 19.368] compiled for 1.15.0, module version = 2.3.2
[ 19.368] Module class: X.Org Video Driver
[ 19.368] ABI class: X.Org Video Driver, version 15.0
[ 19.368] (II) NOUVEAU driver
[ 19.368] (II) NOUVEAU driver for NVIDIA chipset families :
[ 19.368] RIVA TNT (NV04)
[ 19.368] RIVA TNT2 (NV05)
[ 19.368] GeForce 256 (NV10)
[ 19.368] GeForce 2 (NV11, NV15)
[ 19.368] GeForce 4MX (NV17, NV18)
[ 19.368] GeForce 3 (NV20)
[ 19.368] GeForce 4Ti (NV25, NV28)
[ 19.368] GeForce FX (NV3x)
[ 19.368] GeForce 6 (NV4x)
[ 19.368] GeForce 7 (G7x)
[ 19.368] GeForce 8 (G8x)
[ 19.368] GeForce GTX 200 (NVA0)
[ 19.368] GeForce GTX 400 (NVC0)
[ 19.368] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.368] (II) VESA: driver for VESA chipsets: vesa
[ 19.368] (++) using VT number 1
[ 19.369] (II) [drm] nouveau interface version: 1.1.1
[ 19.369] (II) modesetting(G0): using drv /dev/dri/card1
[ 19.369] (WW) Falling back to old probe method for modesetting
[ 19.369] (WW) Falling back to old probe method for vesa
[ 19.369] (II) Loading sub module "dri2"
[ 19.369] (II) LoadModule: "dri2"
[ 19.369] (II) Module "dri2" already built-in
[ 19.369] (--) NOUVEAU(0): Chipset: "NVIDIA NVE7"
[ 19.369] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.369] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 19.369] (==) NOUVEAU(0): RGB weight 888
[ 19.369] (==) NOUVEAU(0): Default visual is TrueColor
[ 19.369] (==) NOUVEAU(0): Using HW cursor
[ 19.369] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 19.369] (==) NOUVEAU(0): Page flipping enabled
[ 19.369] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 19.377] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 19.414] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 19.419] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 19.421] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 19.425] (II) NOUVEAU(0): EDID for output eDP-1
[ 19.425] (II) NOUVEAU(0): Manufacturer: APP Model: a00f Serial#: 0
[ 19.425] (II) NOUVEAU(0): Year: 2011 Week: 16
[ 19.425] (II) NOUVEAU(0): EDID Version: 1.4
[ 19.425] (II) NOUVEAU(0): Digital Display Input
[ 19.425] (II) NOUVEAU(0): 8 bits per channel
[ 19.425] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 19.425] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 19.425] (II) NOUVEAU(0): Gamma: 2.20
[ 19.425] (II) NOUVEAU(0): No DPMS capabilities specified
[ 19.425] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4
[ 19.425] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 19.425] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 19.425] (II) NOUVEAU(0): redX: 0.653 redY: 0.334 greenX: 0.300 greenY: 0.620
[ 19.425] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.050 whiteX: 0.312 whiteY: 0.329
[ 19.425] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 19.425] (II) NOUVEAU(0): Supported detailed timing:
[ 19.425] (II) NOUVEAU(0): clock: 337.8 MHz Image Size: 331 x 207 mm
[ 19.425] (II) NOUVEAU(0): h_active: 2880 h_sync: 2928 h_sync_end 2960 h_blank_end 3040 h_border: 0
[ 19.425] (II) NOUVEAU(0): v_active: 1800 v_sync: 1803 v_sync_end 1809 v_blanking: 1852 v_border: 0
[ 19.425] (II) NOUVEAU(0): Monitor name: Color LCD
[ 19.425] (II) NOUVEAU(0): EDID (in hex):
[ 19.425] (II) NOUVEAU(0): 00ffffffffffff0006100fa000000000
[ 19.425] (II) NOUVEAU(0): 10150104a5211578026fb1a7554c9e25
[ 19.425] (II) NOUVEAU(0): 0c505400000001010101010101010101
[ 19.425] (II) NOUVEAU(0): 010101010101ef8340a0b00834703020
[ 19.425] (II) NOUVEAU(0): 36004bcf1000001a000000fc00436f6c
[ 19.425] (II) NOUVEAU(0): 6f72204c43440a202020000000100000
[ 19.425] (II) NOUVEAU(0): 00000000000000000000000000000010
[ 19.425] (II) NOUVEAU(0): 000000000000000000000000000000e7
[ 19.425] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 19.425] (II) NOUVEAU(0): Modeline "2880x1800"x60.0 337.75 2880 2928 2960 3040 1800 1803 1809 1852 +hsync -vsync (111.1 kHz eP)
[ 19.425] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 19.425] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 19.426] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 19.462] (II) NOUVEAU(0): EDID for output DP-1
[ 19.462] (II) NOUVEAU(0): Manufacturer: DEL Model: a055 Serial#: 825448780
[ 19.462] (II) NOUVEAU(0): Year: 2010 Week: 47
[ 19.462] (II) NOUVEAU(0): EDID Version: 1.3
[ 19.462] (II) NOUVEAU(0): Digital Display Input
[ 19.462] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 19.462] (II) NOUVEAU(0): Gamma: 2.20
[ 19.462] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 19.462] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.462] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 19.462] (II) NOUVEAU(0): redX: 0.678 redY: 0.309 greenX: 0.202 greenY: 0.689
[ 19.462] (II) NOUVEAU(0): blueX: 0.148 blueY: 0.051 whiteX: 0.313 whiteY: 0.329
[ 19.462] (II) NOUVEAU(0): Supported established timings:
[ 19.462] (II) NOUVEAU(0): 720x400@70Hz
[ 19.462] (II) NOUVEAU(0): 640x480@60Hz
[ 19.462] (II) NOUVEAU(0): 640x480@75Hz
[ 19.462] (II) NOUVEAU(0): 800x600@60Hz
[ 19.462] (II) NOUVEAU(0): 800x600@75Hz
[ 19.462] (II) NOUVEAU(0): 1024x768@60Hz
[ 19.462] (II) NOUVEAU(0): 1024x768@75Hz
[ 19.462] (II) NOUVEAU(0): 1280x1024@75Hz
[ 19.462] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 19.462] (II) NOUVEAU(0): Supported standard timings:
[ 19.462] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 19.462] (II) NOUVEAU(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 19.462] (II) NOUVEAU(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 19.462] (II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 19.462] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 19.462] (II) NOUVEAU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 19.462] (II) NOUVEAU(0): Supported detailed timing:
[ 19.462] (II) NOUVEAU(0): clock: 241.5 MHz Image Size: 597 x 336 mm
[ 19.462] (II) NOUVEAU(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 19.462] (II) NOUVEAU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 19.462] (II) NOUVEAU(0): Serial No: D971T0BH13YL
[ 19.462] (II) NOUVEAU(0): Monitor name: DELL U2711
[ 19.462] (II) NOUVEAU(0): Ranges: V min: 49 V max: 86 Hz, H min: 29 H max: 113 kHz, PixClock max 285 MHz
[ 19.462] (II) NOUVEAU(0): EDID (in hex):
[ 19.462] (II) NOUVEAU(0): 00ffffffffffff0010ac55a04c593331
[ 19.462] (II) NOUVEAU(0): 2f140103803c2278ea8e05ad4f33b026
[ 19.462] (II) NOUVEAU(0): 0d5054a54b008100b300d100714fa940
[ 19.462] (II) NOUVEAU(0): 818001010101565e00a0a0a029503020
[ 19.462] (II) NOUVEAU(0): 350055502100001a000000ff00443937
[ 19.462] (II) NOUVEAU(0): 31543042483133594c0a000000fc0044
[ 19.462] (II) NOUVEAU(0): 454c4c2055323731310a2020000000fd
[ 19.462] (II) NOUVEAU(0): 0031561d711c000a20202020202000c3
[ 19.462] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 19.462] (II) NOUVEAU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 19.462] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.462] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19.467] (II) NOUVEAU(0): EDID for output DP-2
[ 19.469] (II) NOUVEAU(0): EDID for output HDMI-1
[ 19.469] (II) NOUVEAU(0): Output eDP-1 connected
[ 19.469] (II) NOUVEAU(0): Output DP-1 connected
[ 19.469] (II) NOUVEAU(0): Output DP-2 disconnected
[ 19.469] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 19.469] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 19.469] (II) NOUVEAU(0): Output eDP-1 using initial mode 1600x1200
[ 19.469] (II) NOUVEAU(0): Output DP-1 using initial mode 1600x1200
[ 19.469] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.469] (--) NOUVEAU(0): Virtual size is 1600x1200 (pitch 0)
[ 19.469] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 19.469] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.469] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 19.470] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19.470] (**) NOUVEAU(0): Driver mode "2560x1440": 241.5 MHz (scaled from 0.0 MHz), 88.8 kHz, 60.0 Hz
[ 19.470] (II) NOUVEAU(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz eP)
[ 19.470] (**) NOUVEAU(0): Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
[ 19.470] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 19.470] (==) NOUVEAU(0): DPI set to (96, 96)
[ 19.470] (II) Loading sub module "fb"
[ 19.470] (II) LoadModule: "fb"
[ 19.470] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.472] (II) Module fb: vendor="X.Org Foundation"
[ 19.472] compiled for 1.15.0, module version = 1.0.0
[ 19.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.472] (II) Loading sub module "exa"
[ 19.472] (II) LoadModule: "exa"
[ 19.472] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 19.473] (II) Module exa: vendor="X.Org Foundation"
[ 19.473] compiled for 1.15.0, module version = 2.6.0
[ 19.473] ABI class: X.Org Video Driver, version 15.0
[ 19.473] (II) Loading sub module "shadowfb"
[ 19.473] (II) LoadModule: "shadowfb"
[ 19.473] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 19.474] (II) Module shadowfb: vendor="X.Org Foundation"
[ 19.474] compiled for 1.15.0, module version = 1.0.0
[ 19.474] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.474] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 19.474] (==) modesetting(G0): RGB weight 888
[ 19.474] (==) modesetting(G0): Default visual is TrueColor
[ 19.474] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 19.500] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 19.526] (II) modesetting(G0): EDID for output VGA-1-0
[ 19.526] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.526] (==) modesetting(G0): DPI set to (96, 96)
[ 19.526] (II) Loading sub module "fb"
[ 19.526] (II) LoadModule: "fb"
[ 19.526] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.526] (II) Module fb: vendor="X.Org Foundation"
[ 19.526] compiled for 1.15.0, module version = 1.0.0
[ 19.526] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.526] (II) Loading sub module "shadow"
[ 19.526] (II) LoadModule: "shadow"
[ 19.526] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 19.527] (II) Module shadow: vendor="X.Org Foundation"
[ 19.527] compiled for 1.15.0, module version = 1.1.0
[ 19.527] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.527] (II) UnloadModule: "vesa"
[ 19.527] (II) Unloading vesa
[ 19.527] (--) Depth 24 pixmap format is 32 bpp
[ 19.529] (==) modesetting(G0): Backing store enabled
[ 19.529] (==) modesetting(G0): Silken mouse enabled
[ 19.529] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.529] (==) modesetting(G0): DPMS enabled
[ 19.533] (II) NOUVEAU(0): Opened GPU channel 0
[ 19.535] (II) NOUVEAU(0): [DRI2] Setup complete
[ 19.535] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 19.535] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 19.536] (II) EXA(0): Driver allocated offscreen pixmaps
[ 19.536] (II) EXA(0): Driver registered support for the following operations:
[ 19.536] (II) Solid
[ 19.536] (II) Copy
[ 19.536] (II) Composite (RENDER acceleration)
[ 19.536] (II) UploadToScreen
[ 19.536] (II) DownloadFromScreen
[ 19.536] (==) NOUVEAU(0): Backing store enabled
[ 19.536] (==) NOUVEAU(0): Silken mouse enabled
[ 19.536] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 19.536] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 19.536] (==) NOUVEAU(0): DPMS enabled
[ 19.536] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.536] (--) RandR disabled
[ 19.616] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.616] (II) AIGLX: enabled GLX_ARB_create_context
[ 19.616] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 19.616] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 19.616] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.616] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.616] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 19.616] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 19.616] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.617] (II) AIGLX: Loaded and initialized nouveau
[ 19.617] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.617] (II) modesetting(G0): Damage tracking initialized
[ 19.623] (II) NOUVEAU(0): NVEnterVT is called.
[ 27.628] (II) NOUVEAU(0): Setting screen physical size to 423 x 317
[ 27.628] resize called 1600 1200
[ 27.665] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.665] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.665] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.665] (II) LoadModule: "evdev"
[ 27.665] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.667] (II) Module evdev: vendor="X.Org Foundation"
[ 27.667] compiled for 1.15.0, module version = 2.8.2
[ 27.667] Module class: X.Org XInput Driver
[ 27.667] ABI class: X.Org XInput driver, version 20.0
[ 27.667] (II) Using input driver 'evdev' for 'Power Button'
[ 27.667] (**) Power Button: always reports core events
[ 27.667] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 27.667] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.667] (--) evdev: Power Button: Found keys
[ 27.667] (II) evdev: Power Button: Configuring as keyboard
[ 27.667] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 27.667] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.667] (**) Option "xkb_rules" "evdev"
[ 27.667] (**) Option "xkb_model" "pc104"
[ 27.667] (**) Option "xkb_layout" "us"
[ 27.667] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.681] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 27.681] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.681] (**) Video Bus: Applying InputClass "system-keyboard"
[ 27.681] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.681] (**) Video Bus: always reports core events
[ 27.681] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 27.681] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.681] (--) evdev: Video Bus: Found keys
[ 27.681] (II) evdev: Video Bus: Configuring as keyboard
[ 27.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[ 27.681] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.681] (**) Option "xkb_rules" "evdev"
[ 27.681] (**) Option "xkb_model" "pc104"
[ 27.681] (**) Option "xkb_layout" "us"
[ 27.681] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.681] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 27.681] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.681] (**) Video Bus: Applying InputClass "system-keyboard"
[ 27.681] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.681] (**) Video Bus: always reports core events
[ 27.681] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 27.681] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27.681] (--) evdev: Video Bus: Found keys
[ 27.681] (II) evdev: Video Bus: Configuring as keyboard
[ 27.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7/event7"
[ 27.681] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 27.681] (**) Option "xkb_rules" "evdev"
[ 27.681] (**) Option "xkb_model" "pc104"
[ 27.681] (**) Option "xkb_layout" "us"
[ 27.681] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.681] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 27.681] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.681] (**) Power Button: Applying InputClass "system-keyboard"
[ 27.681] (II) Using input driver 'evdev' for 'Power Button'
[ 27.681] (**) Power Button: always reports core events
[ 27.681] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 27.681] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27.681] (--) evdev: Power Button: Found keys
[ 27.681] (II) evdev: Power Button: Configuring as keyboard
[ 27.681] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 27.681] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 27.681] (**) Option "xkb_rules" "evdev"
[ 27.681] (**) Option "xkb_model" "pc104"
[ 27.681] (**) Option "xkb_layout" "us"
[ 27.681] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.682] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 27.682] (II) No input driver specified, ignoring this device.
[ 27.682] (II) This device may have been added with another device file.
[ 27.682] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 27.682] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.682] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 27.682] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.682] (**) Sleep Button: always reports core events
[ 27.682] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 27.682] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27.682] (--) evdev: Sleep Button: Found keys
[ 27.682] (II) evdev: Sleep Button: Configuring as keyboard
[ 27.682] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 27.682] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 27.682] (**) Option "xkb_rules" "evdev"
[ 27.682] (**) Option "xkb_model" "pc104"
[ 27.682] (**) Option "xkb_layout" "us"
[ 27.682] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.682] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.682] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 27.682] (II) No input driver specified, ignoring this device.
[ 27.682] (II) This device may have been added with another device file.
[ 27.682] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 27.682] (II) No input driver specified, ignoring this device.
[ 27.682] (II) This device may have been added with another device file.
[ 27.682] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 27.682] (II) No input driver specified, ignoring this device.
[ 27.682] (II) This device may have been added with another device file.
[ 27.682] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 27.683] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 27.683] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27.683] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 27.683] (**) Logitech USB Optical Mouse: always reports core events
[ 27.683] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 27.683] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 27.683] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 27.683] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 27.683] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 27.683] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 27.683] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 27.683] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 27.683] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27.683] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input6/event6"
[ 27.683] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[ 27.683] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 27.683] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27.683] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 27.683] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27.683] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 27.683] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 27.683] (II) No input driver specified, ignoring this device.
[ 27.683] (II) This device may have been added with another device file.
[ 27.683] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event12)
[ 27.683] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.683] (**) Apple Inc. Apple Keyboard: Applying InputClass "system-keyboard"
[ 27.683] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 27.683] (**) Apple Inc. Apple Keyboard: always reports core events
[ 27.683] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event12"
[ 27.683] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 27.683] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 27.683] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 27.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.2/1-1.1.4.2:1.0/input/input12/event12"
[ 27.683] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 12)
[ 27.683] (**) Option "xkb_rules" "evdev"
[ 27.683] (**) Option "xkb_model" "pc104"
[ 27.683] (**) Option "xkb_layout" "us"
[ 27.683] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.683] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event13)
[ 27.683] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.683] (**) Apple Inc. Apple Keyboard: Applying InputClass "system-keyboard"
[ 27.683] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 27.683] (**) Apple Inc. Apple Keyboard: always reports core events
[ 27.683] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event13"
[ 27.683] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 27.683] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 27.683] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 27.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.2/1-1.1.4.2:1.1/input/input13/event13"
[ 27.684] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 13)
[ 27.684] (**) Option "xkb_rules" "evdev"
[ 27.684] (**) Option "xkb_model" "pc104"
[ 27.684] (**) Option "xkb_layout" "us"
[ 27.684] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.684] (II) config/udev: Adding input device FaceTime HD Camera (Built-in) (/dev/input/event5)
[ 27.684] (**) FaceTime HD Camera (Built-in): Applying InputClass "evdev keyboard catchall"
[ 27.684] (**) FaceTime HD Camera (Built-in): Applying InputClass "system-keyboard"
[ 27.684] (II) Using input driver 'evdev' for 'FaceTime HD Camera (Built-in)'
[ 27.684] (**) FaceTime HD Camera (Built-in): always reports core events
[ 27.684] (**) evdev: FaceTime HD Camera (Built-in): Device: "/dev/input/event5"
[ 27.684] (--) evdev: FaceTime HD Camera (Built-in): Vendor 0x5ac Product 0x8510
[ 27.684] (--) evdev: FaceTime HD Camera (Built-in): Found keys
[ 27.684] (II) evdev: FaceTime HD Camera (Built-in): Configuring as keyboard
[ 27.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input5/event5"
[ 27.684] (II) XINPUT: Adding extended input device "FaceTime HD Camera (Built-in)" (type: KEYBOARD, id 14)
[ 27.684] (**) Option "xkb_rules" "evdev"
[ 27.684] (**) Option "xkb_model" "pc104"
[ 27.684] (**) Option "xkb_layout" "us"
[ 27.684] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.684] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 27.684] (II) No input driver specified, ignoring this device.
[ 27.684] (II) This device may have been added with another device file.
[ 27.684] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
[ 27.684] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 27.684] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "system-keyboard"
[ 27.684] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 27.684] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 27.684] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
[ 27.684] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x262
[ 27.684] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[ 27.684] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[ 27.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.0/input/input10/event10"
[ 27.684] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 15)
[ 27.684] (**) Option "xkb_rules" "evdev"
[ 27.684] (**) Option "xkb_model" "pc104"
[ 27.684] (**) Option "xkb_layout" "us"
[ 27.684] (**) Option "xkb_options" "ctrl:nocaps"
[ 27.685] (II) config/udev: Adding input device bcm5974 (/dev/input/event9)
[ 27.685] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 27.685] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 27.685] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[ 27.685] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[ 27.685] (II) LoadModule: "synaptics"
[ 27.685] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.685] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.685] compiled for 1.15.0, module version = 1.7.3
[ 27.685] Module class: X.Org XInput Driver
[ 27.685] ABI class: X.Org XInput driver, version 20.0
[ 27.686] (II) Using input driver 'synaptics' for 'bcm5974'
[ 27.686] (**) bcm5974: always reports core events
[ 27.686] (**) Option "Device" "/dev/input/event9"
[ 27.811] (II) synaptics: bcm5974: found clickpad property
[ 27.811] (--) synaptics: bcm5974: x-axis range -4750 - 5280 (res 0)
[ 27.811] (--) synaptics: bcm5974: y-axis range -150 - 6730 (res 0)
[ 27.811] (--) synaptics: bcm5974: pressure range 0 - 256
[ 27.811] (--) synaptics: bcm5974: finger width range 0 - 16
[ 27.811] (--) synaptics: bcm5974: buttons: left double triple
[ 27.811] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x262
[ 27.811] (**) Option "BottomEdge" "25"
[ 27.811] (**) Option "TapButton1" "1"
[ 27.811] (**) Option "TapButton2" "2"
[ 27.811] (**) Option "TapButton3" "3"
[ 27.811] (**) Option "ClickFinger1" "1"
[ 27.811] (**) Option "ClickFinger2" "2"
[ 27.811] (**) Option "ClickFinger3" "3"
[ 27.811] (**) Option "PalmDetect" "1"
[ 27.811] (WW) synaptics: bcm5974: TopEdge is bigger than BottomEdge. Fixing.
[ 27.811] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 27.811] (--) synaptics: bcm5974: touchpad found
[ 27.811] (**) bcm5974: always reports core events
[ 27.863] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.2/input/input9/event9"
[ 27.863] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 16)
[ 27.863] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 27.863] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 27.863] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.016
[ 27.864] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 27.864] (**) bcm5974: (accel) acceleration profile 1
[ 27.864] (**) bcm5974: (accel) acceleration factor: 2.000
[ 27.864] (**) bcm5974: (accel) acceleration threshold: 4
[ 27.865] (--) synaptics: bcm5974: touchpad found
[ 27.865] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse1)
[ 27.865] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27.866] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 27.866] (II) No input driver specified, ignoring this device.
[ 27.866] (II) This device may have been added with another device file.
[ 59.426] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 59.426] (II) NOUVEAU(0): NVLeaveVT is called.The only two lines that give me pause are:
[ 27.628] (II) NOUVEAU(0): Setting screen physical size to 423 x 317
[ 27.628] resize called 1600 1200But I'm not sure if those could be the issue.
A selection from ps -A (from tty2) shows the same picture--my WM is running, X seems to have started just fine.
433 tty1 00:00:00 zsh
459 tty1 00:00:00 startx
476 tty1 00:00:00 xinit
480 tty1 00:00:00 xmonad-x86_64-l
481 tty1 00:00:00 syndaemon
498 ? 00:00:01 xmobarSo, at this point, I'm at a loss. Where else can I look to find a clue about what's going wrong?
Lastly, I looked at dmesg, but didn't see anything obvious (to me).
[ 3.366961] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 3.366963] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.366964] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.366966] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 3.366968] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.366970] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 3.366971] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.366973] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 3.366974] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 3.366976] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.369828] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 3.369830] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[ 3.369832] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.369839] pnp: PnP ACPI: found 10 devices
[ 3.369840] ACPI: bus type PNP unregistered
[ 3.376125] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[ 3.376173] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 3.376176] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 3.376179] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 3.376181] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[ 3.376184] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
[ 3.376186] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
[ 3.376191] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
[ 3.376194] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 3.376200] pci 0000:00:01.2: PCI bridge to [bus 02]
[ 3.376204] pci 0000:00:01.2: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 3.376213] pci 0000:03:00.0: BAR 6: assigned [mem 0xc1830000-0xc18307ff pref]
[ 3.376215] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 3.376225] pci 0000:00:1c.0: bridge window [mem 0xc1a00000-0xc1afffff]
[ 3.376230] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
[ 3.376238] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 3.376245] pci 0000:00:1c.1: bridge window [mem 0xc1900000-0xc19fffff]
[ 3.376257] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.376258] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.376260] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.376261] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 3.376263] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 3.376264] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 3.376265] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 3.376267] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 3.376268] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 3.376270] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 3.376271] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 3.376272] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 3.376274] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 3.376275] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 3.376277] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 3.376278] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 3.376280] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff]
[ 3.376281] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 3.376282] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 3.376284] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
[ 3.376285] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[ 3.376287] pci_bus 0000:05: resource 0 [io 0x4000-0x6fff]
[ 3.376288] pci_bus 0000:05: resource 1 [mem 0xc1d00000-0xcdffffff]
[ 3.376290] pci_bus 0000:05: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
[ 3.376291] pci_bus 0000:02: resource 1 [mem 0xc1b00000-0xc1bfffff]
[ 3.376293] pci_bus 0000:03: resource 1 [mem 0xc1a00000-0xc1afffff]
[ 3.376294] pci_bus 0000:03: resource 2 [mem 0xc1800000-0xc18fffff 64bit pref]
[ 3.376296] pci_bus 0000:04: resource 1 [mem 0xc1900000-0xc19fffff]
[ 3.376321] NET: Registered protocol family 2
[ 3.376466] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.376598] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.376701] TCP: Hash tables configured (established 65536 bind 65536)
[ 3.376714] TCP: reno registered
[ 3.376725] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.376750] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.376807] NET: Registered protocol family 1
[ 3.376820] pci 0000:00:02.0: Boot video device
[ 3.376830] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 3.376892] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 3.376894] pci 0000:00:14.0: PCI INT A: no GSI
[ 3.376984] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 3.377319] PCI: CLS 256 bytes, default 64
[ 3.377358] Unpacking initramfs...
[ 3.437545] Freeing initrd memory: 3844K (ffff88003786e000 - ffff880037c2f000)
[ 3.437551] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.437554] software IO TLB [mem 0x8067a000-0x8467a000] (64MB) mapped at [ffff88008067a000-ffff880084679fff]
[ 3.437827] Scanning for low memory corruption every 60 seconds
[ 3.438049] audit: initializing netlink socket (disabled)
[ 3.438057] type=2000 audit(1393569776.426:1): initialized
[ 3.449080] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.450136] zbud: loaded
[ 3.450273] VFS: Disk quotas dquot_6.5.2
[ 3.450303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.450434] msgmni has been set to 15786
[ 3.450474] Key type big_key registered
[ 3.450675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.450716] io scheduler noop registered
[ 3.450717] io scheduler deadline registered
[ 3.450736] io scheduler cfq registered (default)
[ 3.450861] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.450973] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 3.451032] pcieport 0000:00:01.2: enabling device (0000 -> 0002)
[ 3.451102] pcieport 0000:00:01.2: irq 42 for MSI/MSI-X
[ 3.451239] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
[ 3.451397] pcieport 0000:00:1c.1: irq 44 for MSI/MSI-X
[ 3.451499] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 3.451501] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 3.451502] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 3.451504] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 3.451518] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 3.451522] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[ 3.451535] pcieport 0000:00:01.2: Signaling PME through PCIe PME interrupt
[ 3.451538] pcie_pme 0000:00:01.2:pcie01: service driver pcie_pme loaded
[ 3.451560] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.451562] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.451563] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 3.451571] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.451591] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.451593] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 3.451600] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.451609] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.451621] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.451658] efifb: probing for efifb
[ 3.455450] efifb: framebuffer at 0x90020000, mapped to 0xffffc9000ab00000, using 28800k, total 28800k
[ 3.455451] efifb: mode is 2880x1800x32, linelength=16384, pages=1
[ 3.455452] efifb: scrolling: redraw
[ 3.455453] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.469938] Console: switching to colour frame buffer device 360x112
[ 3.484269] fb0: EFI VGA frame buffer device
[ 3.484275] intel_idle: MWAIT substates: 0x21120
[ 3.484276] intel_idle: v0.4 model 0x3A
[ 3.484277] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.484452] GHES: HEST is not enabled!
[ 3.484493] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.484852] Linux agpgart interface v0.103
[ 3.484911] rtc_cmos 00:05: RTC can wake from S4
[ 3.485032] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.485064] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.485071] Intel P-state driver initializing.
[ 3.485079] Intel pstate controlling: cpu 0
[ 3.485091] Intel pstate controlling: cpu 1
[ 3.485099] Intel pstate controlling: cpu 2
[ 3.485107] Intel pstate controlling: cpu 3
[ 3.485116] Intel pstate controlling: cpu 4
[ 3.485123] Intel pstate controlling: cpu 5
[ 3.485137] Intel pstate controlling: cpu 6
[ 3.485148] Intel pstate controlling: cpu 7
[ 3.485237] drop_monitor: Initializing network drop monitor service
[ 3.485279] TCP: cubic registered
[ 3.485346] NET: Registered protocol family 10
[ 3.485465] NET: Registered protocol family 17
[ 3.485472] Key type dns_resolver registered
[ 3.485717] registered taskstats version 1
[ 3.486560] Magic number: 2:398:722
[ 3.486646] rtc_cmos 00:05: setting system clock to 2014-02-28 06:42:56 UTC (1393569776)
[ 3.486686] PM: Hibernation image not present or could not be loaded.
[ 3.487355] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 3.487357] Write protecting the kernel read-only data: 8192k
[ 3.489265] Freeing unused kernel memory: 864K (ffff880002528000 - ffff880002600000)
[ 3.490097] Freeing unused kernel memory: 376K (ffff8800027a2000 - ffff880002800000)
[ 3.497086] systemd-udevd[78]: starting version 208
[ 3.498941] [drm] Initialized drm 1.1.0 20060810
[ 3.499816] wmi: Mapper loaded
[ 3.500180] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 3.500208] ACPI: Lid Switch [LID0]
[ 3.500240] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.500243] ACPI: Power Button [PWRB]
[ 3.500269] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.500271] ACPI: Sleep Button [SLPB]
[ 3.500304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.500306] ACPI: Power Button [PWRF]
[ 3.503644] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 3.503663] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 3.503674] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 3.503682] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 3.503697] checking generic (90020000 1c20000) vs hw (90000000 10000000)
[ 3.503699] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[ 3.503709] Console: switching to colour dummy device 80x25
[ 3.503874] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 3.504365] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7150a2
[ 3.504367] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 3.504368] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 3.506114] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.593807] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.593808] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.593902] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.593904] nouveau [ VBIOS][0000:01:00.0] version 80.07.26.04.01
[ 3.594593] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[ 3.594607] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 3.594657] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 3.594658] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 3.594659] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 3.627116] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.627120] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 3.627131] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.627162] nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 419 MHz
[ 3.627209] nouveau [ CLK][0000:01:00.0] 0a: core 270-900 MHz memory 780 MHz
[ 3.627243] nouveau [ CLK][0000:01:00.0] 0e: core 270-900 MHz memory 2000 MHz
[ 3.627266] nouveau [ CLK][0000:01:00.0] 0f: core 270-900 MHz memory 2508 MHz
[ 3.627408] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 340 MHz
[ 3.651521] [TTM] Zone kernel: Available graphics memory: 4042510 kiB
[ 3.651523] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.651524] [TTM] Initializing pool allocator
[ 3.651526] [TTM] Initializing DMA pool allocator
[ 3.651534] nouveau [ DRM] VRAM: 1024 MiB
[ 3.651535] nouveau [ DRM] GART: 1048576 MiB
[ 3.651537] nouveau [ DRM] TMDS table version 2.0
[ 3.651538] nouveau [ DRM] DCB version 4.0
[ 3.651540] nouveau [ DRM] DCB outp 00: 048101b6 0f230010
[ 3.651541] nouveau [ DRM] DCB outp 01: 018212d6 0f220020
[ 3.651542] nouveau [ DRM] DCB outp 02: 01021212 00020020
[ 3.651543] nouveau [ DRM] DCB outp 03: 088324c6 0f220010
[ 3.651544] nouveau [ DRM] DCB outp 04: 08032402 00020010
[ 3.651545] nouveau [ DRM] DCB outp 05: 02843862 00020010
[ 3.651546] nouveau [ DRM] DCB conn 00: 00020047
[ 3.651547] nouveau [ DRM] DCB conn 01: 02208146
[ 3.651556] nouveau [ DRM] DCB conn 02: 01104246
[ 3.651557] nouveau [ DRM] DCB conn 03: 00410361
[ 3.652597] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.652598] [drm] No driver support for vblank timestamp query.
[ 3.652689] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 3.662556] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.735437] nouveau [ DRM] allocated 2880x1800 fb: 0x80000, bo ffff880261ea8000
[ 3.735544] fbcon: nouveaufb (fb0) is primary device
[ 4.223655] nouveau E[ PDISP][0000:01:00.0] DP:0006:0281: link training failed
[ 4.440401] tsc: Refined TSC clocksource calibration: 2594.113 MHz
[ 5.441244] Switched to clocksource tsc
[ 6.187386] Console: switching to colour frame buffer device 320x90
[ 6.191888] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.191889] nouveau 0000:01:00.0: registered panic notifier
[ 6.191892] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 6.206385] ACPI: bus type USB registered
[ 6.206402] usbcore: registered new interface driver usbfs
[ 6.206409] usbcore: registered new interface driver hub
[ 6.206437] usbcore: registered new device driver usb
[ 6.207459] SCSI subsystem initialized
[ 6.207480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.207531] sdhci: Secure Digital Host Controller Interface driver
[ 6.207533] sdhci: Copyright(c) Pierre Ossman
[ 6.207600] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 6.207602] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 6.207626] ehci-pci: EHCI PCI platform driver
[ 6.207639] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.207645] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 6.207746] sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 6.207801] sdhci-pci 0000:03:00.1: enabling device (0000 -> 0002)
[ 6.208005] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA
[ 6.208106] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 6.208130] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
[ 6.208368] hub 1-0:1.0: USB hub found
[ 6.208378] hub 1-0:1.0: 4 ports detected
[ 6.208489] libata version 3.00 loaded.
[ 6.208584] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.208587] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 6.208702] hub 2-0:1.0: USB hub found
[ 6.208712] hub 2-0:1.0: 4 ports detected
[ 6.228353] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 6.228357] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.228368] ehci-pci 0000:00:1a.0: debug port 2
[ 6.232261] ehci-pci 0000:00:1a.0: cache line size of 256 is not supported
[ 6.232273] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc1c16c00
[ 6.241565] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.241669] hub 3-0:1.0: USB hub found
[ 6.241676] hub 3-0:1.0: 2 ports detected
[ 6.241819] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 6.241823] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 6.241836] ehci-pci 0000:00:1d.0: debug port 2
[ 6.245725] ehci-pci 0000:00:1d.0: cache line size of 256 is not supported
[ 6.245736] ehci-pci 0000:00:1d.0: irq 22, io mem 0xc1c16800
[ 6.254903] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.255111] hub 4-0:1.0: USB hub found
[ 6.255118] hub 4-0:1.0: 2 ports detected
[ 6.255203] ahci 0000:00:1f.2: version 3.0
[ 6.255343] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 6.255383] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 6.255385] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 6.256016] scsi0 : ahci
[ 6.256101] scsi1 : ahci
[ 6.256162] scsi2 : ahci
[ 6.256220] scsi3 : ahci
[ 6.256279] scsi4 : ahci
[ 6.256334] scsi5 : ahci
[ 6.256361] ata1: SATA max UDMA/133 abar m2048@0xc1c16000 port 0xc1c16100 irq 47
[ 6.256362] ata2: DUMMY
[ 6.256362] ata3: DUMMY
[ 6.256363] ata4: DUMMY
[ 6.256364] ata5: DUMMY
[ 6.256364] ata6: DUMMY
[ 6.568585] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 6.575211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.575811] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6.576057] ata1.00: ATA-8: APPLE SSD SM512E, CXM09A1Q, max UDMA/133
[ 6.576060] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.576480] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6.576690] ata1.00: configured for UDMA/133
[ 6.576954] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM512E CXM0 PQ: 0 ANSI: 5
[ 6.579471] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/465 GiB)
[ 6.579473] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.579510] sd 0:0:0:0: [sda] Write Protect is off
[ 6.579511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.579520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.581694] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 6.582344] hub 1-1:1.0: USB hub found
[ 6.582369] hub 1-1:1.0: 1 port detected
[ 6.582511] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.634428] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opts: data=writeback
[ 6.688594] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 6.876751] hub 3-1:1.0: USB hub found
[ 6.886782] hub 3-1:1.0: 6 ports detected
[ 7.072145] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 7.076068] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.076454] systemd[1]: Set hostname to <archraptor>.
[ 7.077359] random: systemd urandom read with 44 bits of entropy available
[ 7.150613] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.150773] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.150819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.150829] systemd[1]: Starting Remote File Systems.
[ 7.150838] systemd[1]: Reached target Remote File Systems.
[ 7.150844] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.150865] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.150871] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.150889] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.150895] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.150908] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.150914] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.150930] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.150939] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.150961] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.150968] systemd[1]: Starting Paths.
[ 7.150975] systemd[1]: Reached target Paths.
[ 7.150998] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.151063] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.151072] systemd[1]: Starting udev Kernel Socket.
[ 7.151086] systemd[1]: Listening on udev Kernel Socket.
[ 7.151094] systemd[1]: Starting udev Control Socket.
[ 7.151109] systemd[1]: Listening on udev Control Socket.
[ 7.151115] systemd[1]: Starting Encrypted Volumes.
[ 7.151121] systemd[1]: Reached target Encrypted Volumes.
[ 7.151128] systemd[1]: Starting Journal Socket.
[ 7.151156] systemd[1]: Listening on Journal Socket.
[ 7.151170] systemd[1]: Mounting Huge Pages File System...
[ 7.151480] systemd[1]: Starting udev Coldplug all Devices...
[ 7.151702] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.152321] systemd[1]: Starting Apply Kernel Variables...
[ 7.153398] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.153420] systemd[1]: Starting Setup Virtual Console...
[ 7.154548] systemd[1]: Started Load Kernel Modules.
[ 7.154560] systemd[1]: Mounted FUSE Control File System.
[ 7.154569] systemd[1]: Mounting Debug File System...
[ 7.154710] systemd[1]: Starting Journal Service...
[ 7.154887] systemd[1]: Started Journal Service.
[ 7.164570] systemd-journald[157]: Vacuuming done, freed 0 bytes
[ 7.167691] EXT4-fs (sda7): Cannot change data mode on remount
[ 7.194494] systemd-udevd[187]: starting version 208
[ 7.196618] hub 4-1:1.0: USB hub found
[ 7.196759] hub 4-1:1.0: 8 ports detected
[ 7.229734] ACPI: AC Adapter [ADP1] (on-line)
[ 7.230334] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 7.230339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.230343] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 7.230347] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.230348] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 7.230351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.230352] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.230544] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.232293] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 7.232373] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 7.232378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.232525] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[ 7.237774] apple_gmux: Found gmux version 3.2.19 [indexed]
[ 7.245889] [drm] Memory usable by graphics device = 2048M
[ 7.254499] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.257199] cfg80211: Calling CRDA to update world regulatory domain
[ 7.257695] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 7.258721] platform microcode: Direct firmware load failed with error -2
[ 7.258723] platform microcode: Falling back to user helper
[ 7.258976] lib80211: common routines for IEEE802.11 drivers
[ 7.258978] lib80211_crypt: registered algorithm 'NULL'
[ 7.267520] iTCO_vendor_support: vendor-support=0
[ 7.268142] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 7.268257] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 7.269588] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 7.269601] platform microcode: Direct firmware load failed with error -2
[ 7.269604] platform microcode: Falling back to user helper
[ 7.270254] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 7.270264] platform microcode: Direct firmware load failed with error -2
[ 7.270266] platform microcode: Falling back to user helper
[ 7.270547] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 7.270556] platform microcode: Direct firmware load failed with error -2
[ 7.270558] platform microcode: Falling back to user helper
[ 7.270789] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 7.270796] platform microcode: Direct firmware load failed with error -2
[ 7.270797] platform microcode: Falling back to user helper
[ 7.271022] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 7.271032] platform microcode: Direct firmware load failed with error -2
[ 7.271034] platform microcode: Falling back to user helper
[ 7.272373] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 7.272380] platform microcode: Direct firmware load failed with error -2
[ 7.272381] platform microcode: Falling back to user helper
[ 7.273443] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 7.273454] platform microcode: Direct firmware load failed with error -2
[ 7.273457] platform microcode: Falling back to user helper
[ 7.274266] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.275601] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 7.287564] wl: module license 'Mixed/Proprietary' taints kernel.
[ 7.287567] Disabling lock debugging due to kernel taint
[ 7.289622] hub 1-1.1:1.0: USB hub found
[ 7.289808] hub 1-1.1:1.0: 7 ports detected
[ 7.302294] wl 0000:04:00.0: enabling device (0000 -> 0002)
[ 7.309575] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem
[ 7.310346] EXT4-fs (sda6): mounted filesystem without journal. Opts: stripe=4
[ 7.316289] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 7.319604] applesmc: key=493 fan=2 temp=44 index=43 acc=0 lux=2 kbd=1
[ 7.322738] ACPI: Battery Slot [BAT0] (battery present)
[ 7.350794] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 7.351147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.351148] [drm] Driver supports precise vblank timestamp query.
[ 7.351330] i915 0000:00:02.0: Invalid ROM contents
[ 7.351886] [drm] failed to find VBIOS tables
[ 7.351921] vga_switcheroo: enabled
[ 7.356474] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[ 7.366348] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 7.366350] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 7.434205] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 7.435457] lib80211_crypt: registered algorithm 'TKIP'
[ 7.435583] eth0: Broadcom BCM4331 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[ 7.473665] systemd-udevd[189]: renamed network interface eth0 to wlp4s0
[ 7.484159] media: Linux media interface: v0.10
[ 7.487352] Linux video capture interface: v2.00
[ 7.491688] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
[ 7.502318] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input5
[ 7.502355] usbcore: registered new interface driver uvcvideo
[ 7.502356] USB Video Class driver (1.1.1)
[ 7.549203] usb 4-1.8: new high-speed USB device number 3 using ehci-pci
[ 7.633020] hub 4-1.8:1.0: USB hub found
[ 7.633100] hub 4-1.8:1.0: 2 ports detected
[ 7.645826] [drm] failed to retrieve link info, disabling eDP
[ 7.699261] usb 1-1.1.2: new low-speed USB device number 4 using xhci_hcd
[ 7.716992] usb 1-1.1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 7.728506] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.731853] usbcore: registered new interface driver usbhid
[ 7.731855] usbhid: USB HID core driver
[ 7.732937] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input6
[ 7.733086] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1.1.2/input0
[ 7.734443] mousedev: PS/2 mouse device common for all mice
[ 7.782637] usb 1-1.1.4: new high-speed USB device number 5 using xhci_hcd
[ 7.806716] hub 1-1.1.4:1.0: USB hub found
[ 7.806745] hub 1-1.1.4:1.0: 3 ports detected
[ 7.872782] usb 1-1.1.7: new high-speed USB device number 6 using xhci_hcd
[ 7.886858] hub 1-1.1.7:1.0: USB hub found
[ 7.886902] hub 1-1.1.7:1.0: 4 ports detected
[ 7.966257] usb 4-1.8.1: new full-speed USB device number 4 using ehci-pci
[ 8.066154] hub 4-1.8.1:1.0: USB hub found
[ 8.066279] hub 4-1.8.1:1.0: 3 ports detected
[ 8.146375] usb 4-1.8.2: new full-speed USB device number 5 using ehci-pci
[ 8.226281] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 8.239572] i915 0000:00:02.0: No connectors reported connected with modes
[ 8.239576] [drm] Cannot find any crtc or sizes - going 1024x768
[ 8.241016] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[ 8.241245] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[ 8.241267] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 8.241325] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7
[ 8.259032] random: nonblocking pool is initialized
[ 8.260402] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 8.260503] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 8.260678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[ 8.260739] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 8.260943] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 8.272313] input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.2/input/input9
[ 8.272611] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.0/input/input10
[ 8.273342] usbcore: registered new interface driver bcm5974
[ 8.273711] apple 0003:05AC:0262.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
[ 8.285803] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.286040] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 8.286098] hda_intel: Disabling MSI
[ 8.286104] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 8.323035] usb 1-1.1.4.2: new low-speed USB device number 7 using xhci_hcd
[ 8.344452] usb 1-1.1.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.344457] usb 1-1.1.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.348611] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.2/1-1.1.4.2:1.0/input/input12
[ 8.348801] apple 0003:05AC:024F.0004: input,hidraw2: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-1.1.4.2/input0
[ 8.351707] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.2/1-1.1.4.2:1.1/input/input13
[ 8.351908] apple 0003:05AC:024F.0005: input,hidraw3: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-1.1.4.2/input1
[ 8.378666] apple 0003:05AC:0262.0003: hidraw4: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
[ 8.416531] usb 4-1.8.1.1: new full-speed USB device number 6 using ehci-pci
[ 8.505430] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.1/4-1.8.1.1:1.0/input/input14
[ 8.505632] hid-generic 0003:05AC:820A.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
[ 8.583436] usb 4-1.8.1.2: new full-speed USB device number 7 using ehci-pci
[ 8.646702] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.646902] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 8.647107] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 8.670824] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.1/4-1.8.1.2/4-1.8.1.2:1.0/input/input18
[ 8.670910] hid-generic 0003:05AC:820B.0007: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
[ 8.736920] usb 4-1.8.1.3: new full-speed USB device number 8 using ehci-pci
[ 8.848776] Bluetooth: Core ver 2.17
[ 8.848794] NET: Registered protocol family 31
[ 8.848795] Bluetooth: HCI device and connection manager initialized
[ 8.848803] Bluetooth: HCI socket layer initialized
[ 8.848806] Bluetooth: L2CAP socket layer initialized
[ 8.848810] Bluetooth: SCO socket layer initialized
[ 8.850955] usbcore: registered new interface driver btusb
[ 8.939942] usb 4-1.8.1.1: USB disconnect, device number 6
[ 9.150784] usb 4-1.8.1.2: USB disconnect, device number 7
[ 9.340565] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 10.634209] type=1006 audit(1393569783.640:2): pid=317 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 10.642292] type=1006 audit(1393569783.646:3): pid=431 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 21.650295] nouveau E[ PDISP][0000:01:00.0] chid 1 mthd 0x0080 data 0x00000000 0x00005080 0x0000000d
[ 77.082618] type=1006 audit(1393569850.043:4): pid=504 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=3 res=1Any shove in the right direction (or hey, any direction!) would be much appreciated. Thanks!
Offline
#2 2014-02-28 09:26:38
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: X fails to display, but runs without errors with Dual-Link DVI adapter
Someone else on the forums used a different adapter. It also seems that apple + Thunderbolt is a mess.
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#3 2014-02-28 18:43:32
- jds02006
- Member
- Registered: 2014-02-23
- Posts: 5
Re: X fails to display, but runs without errors with Dual-Link DVI adapter
Unfortunately, that other user was also me, heh. I realize now that my post made it sound like the issue was solved, but it isn't exactly. I can use a passive single-link DVI adapter at work, as the resolution on that monitor is lower, but at home, I have a 2560x1440 monitor that requires dual-link DVI for full resolution.
Also, from the article you linked:
Note, all of this is for Thunderbolt the PCI interconnect, not the video connection. That works just fine on Linux as it isn't PCI Express, but just a video pass-through. No problems there.
So that's consistent with what I've heard.
Plus this suggests that this exact setup *can* work on Linux. At this point, I'm considering doing a quick Ubuntu install just to see if it works out of the box and if so check to see whether they have something I'm missing.
Thanks for your help!
Offline
#4 2014-02-28 19:18:28
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: X fails to display, but runs without errors with Dual-Link DVI adapter
Ah, ok. I was in the assumption the PCI connect had something to do with the video connection. But it seems like Apple wanted to reinvented PCIe...
I'm out of my territory here so feel free to ignore the following.
These are the things I notice in your Xorg.0.log:
[ 19.474] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 19.474] (==) modesetting(G0): RGB weight 888
[ 19.474] (==) modesetting(G0): Default visual is TrueColor
[ 19.474] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 19.500] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 19.526] (II) modesetting(G0): EDID for output VGA-1-0
[ 19.526] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.526] (==) modesetting(G0): DPI set to (96, 96)
What the hell is modesetting doing there?
And have you tried the nvidia blob? It could be that this is not well supported by nouveau. Maybe check up with their IRC / mailing list.
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline